SPE4A627Q0326.pdf
PDF 151 KB Posted
- Attached to
- BEARING, ROLLER, CYLIND
- Solicitation number
- SPE4A627Q0326
- Issued by
-
Defense Logistics Agency Aviation
About this file
Request for Quotations Summary
This is a Request for Quotations (RFQ) issued by the Defense Logistics Agency (DLA) Weapons Support, ASC Commodities Division, for the procurement of cylindrical roller bearings. The solicitation (SPE4A6-27-Q-0326) requests quotations for National Stock Number 3110-00-158-7680, Part Number 52C2233-1, with a quantity requirement of 513 units. The quotation deadline is November 26, 2026, and the required delivery date is 179 days after order (approximately August 28, 2027). The item is designated as a source-controlled, critical application bearing that must be manufactured and tested in accordance with specified technical drawings and approved source requirements. Approved manufacturers include Rollway Bearing Corporation (CAGE 51600) and Rexnord Industries Inc. (CAGE 3M084).
Quotations will be evaluated on a best-value basis considering price, past performance using the Supplier Performance Risk System (SPRS), and delivery compliance, with cost and non-price factors approximately equal in importance. All bearings must be manufactured in the United States, its outlying areas, or Canada, with bearing components manufactured in these locations comprising more than 50 percent of total component cost, in compliance with DFARS clause 252.225-7016. Offerors are required to submit a Contractor's Declaration regarding the domestic or foreign nature of materials and must provide shipping characteristic data under FAR clause 52.247-60 for evaluation of transportation costs. Delivery is FOB origin, pricing is firm fixed price, and quotations are valid for 90 days from the solicitation date. The solicitation incorporates numerous FAR and DFARS clauses addressing compliance requirements, including representations and certifications to be completed by the quoter, and references DLA Procurement Guidance Notices for evaluation procedures.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE
4. CERT.FOR NAT. DEF.
UNDER BDSA REG. 2
AND/OR DMS REG. 1
5. ISSUED BY
7. DELIVERY
9. DESTINATION
10. PLEASE FURNISH QUOTATIONS TO THE
ISSUING OFFICE IN BLOCK 5 ON OR
BEFORE CLOSE OF BUSINESS (Date)
IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.
11. SCHEDULE (See Continuation Sheets)
12. DISCOUNT FOR PROMPT PAYMENT
d. CALENDAR DAYS
NUMBER PERCENTAGE
NOTE: Additional provisions and representations are are not attached.
13. NAME AND ADDRESS OF QUOTER
a. NAME OF QUOTER
14. SIGNATURE OF PERSON AUTHORIZED TO SIGN
QUOTATION
16. SIGNER
AUTHORIZED FOR LOCAL REPRODUCTION
Previous edition not useable
STANDARD FORM 18 (REV. 6-95)
Prescribed by GSA-FAR (48 CFR) 53.215-1(a)
SPE4A6-27-Q-0326
1. REQUEST NO.
2026 NOV 19
2. DATE ISSUED
7017147957
3. REQUISITION/PURCHASE REQUEST NO.
DO-A1
RATING
DLA WEAPONS SUPPORT
ASC COMMODITIES DIVISION
6090 STRATHMORE ROAD
RICHMOND VA 23237
USA
Buyer: Quentin Mceachern DQM0003 Tel: 804-279-2639 Email: Quentin.Mceachern@dla.mil
179 DAYS ADO
6. DELIVER BY (Date)
8. TO:
c. CITY
d. STATE
b. STREET ADDRESS
a. NAME OF CONSIGNEE
e. ZIP CODE
a. 10 CALENDAR DAYS
b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS
15. DATE OF QUOTATION
a. NAME (Type or Print)
AREA CODE
c. TITLE (Type or Print)d. CITY
c. COUNTY
b. STREET ADDRESS
e. STATE f. ZIP CODE
See Schedule
2026 NOV 26
NUMBER
FOB DESTINATION
OTHER
(See Schedule)
CAGE
b. TELEPHONE
See attached schedule to complete quote information.
Quoter must also complete the following:
a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .
b. Prices quoted are:
___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .
___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.
___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;
___ Customer ________________________.
___ Other (provide basis) ______________________________________ _______________________________________ .
c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .
d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.
e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:
f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:
CONTINUED ON NEXT PAGE
PAGE 2 OF 26 PAGES
SPE4A6-27-Q-0326
The following Procurement Guidance Notices (PGNs) are incorporated by reference.
The full text of the notices can be found at: https://www.dla.mil/Aviation/Business/DAANS.
PGN-13-01 Evaluation and Award for Simplified Acquisitions (August 2024)
(a) AWARD. The Government intends to evaluate quotations. The award will be made to the quoter whose quote conforms to the terms and conditions of the solicitation and represents the best value to the Government. Therefore, award may be made to other than the lowest priced or the highest technically rated quote.
(b) RELATIVE IMPORTANCE AND TRADE-OFFS. The Government will base the determination of best value on a comparative assessment of the quoters' prices, past performance, and the other evaluation factors identified elsewhere in this solicitation. The determination of best value also considers the relative importance of the evaluation factors. All evaluation factors, when combined, are:
[ ] significantly more important than cost or price. As other evaluation factors become more equal, the evaluated cost or price becomes more important.
[X] approximately equal to cost or price; or [ ] significantly less important than cost or price. As the evaluated cost/price becomes more equal, relative importance of all other evaluation factors becomes more significant.
The final award decision may involve a trade-off among cost or price and the non-price factors. Factors that may be considered in the trade-off process include, but are not limited to:
Item criticality and weapons system application Current inventory status Historical delivery or quality problems Concerns over limited supply sources and industrial base Benefits from obtaining new sources
(c) COST OR PRICE. The Government will evaluate the quoted cost or price. The Government will add any other cost or price evaluation factors identified elsewhere in this solicitation (e.g., Buy American Act or FOB Origin transportation costs) to arrive at the quoter's evaluated cost or price. The evaluated cost or price will be used in conjunction with the other non-price factors to determine the best value to the Government.
(d) PAST PERFORMANCE. Past performance includes, but is not limited to, the quoter's record of conforming to contract requirements and standards of good workmanship; adherence to contract schedules, including the administrative aspects of performance; the quoter's reputation for reasonable and cooperative behavior and commitment to customer satisfaction; and generally, the quoter's business-like concern for the customer's interest.
(1) The Supplier Performance Risk System (SPRS) is the current term for past performance that is formerly known as Past Performance Information Retrieval System – Statistical Reporting (SPRS), as applicable, will be used to evaluate quality and past performance on DLA awards (refer to Procurement Note L08).
(e) PAST PERFORMANCE EVALUATION FACTORS. The Government will use the past performance evaluation factors marked below in addition to cost or price and other evaluation factors specified in the solicitation. Unless indicated otherwise, past performance is significantly more important than other non-price factors. Within the past performance subfactors, SPRS assessments (as applicable) will be weighed most heavily. Historical quality history and delivery schedule compliance (not captured in SPRS) will be weighed more heavily than the remaining past performance subfactors. All other non-price evaluation factors specified in this solicitation weigh equally, unless otherwise indicated.
[X] SPRS Assessments ( PROC NOTE L08) [ ] Historical Quality (not captured in SPRS) [ ] Historical Delivery Schedule Compliance (not captured in SPRS) [ ] Other (specify):
(End of Notice)
PGN-13-01 (ALT I) Evaluation and Award for Simplified Acquisitions (March 2018)
(a) Quoted Delivery. The Government will evaluate the quoter’s compliance with the delivery schedule specified in the solicitation. Quoting a greater number of days delivery than requested under the solicitation will result in the quote being evaluated less favorably than a quote meeting the requested delivery schedule. There will be no evaluation preference for quoted delivery which is earlier than the requested delivery schedule.
(b) Non-Price Factors. Quoted delivery and past performance will be evaluated equally, unless indicated otherwise below.
[ ] Quoted delivery is weighed more heavily than past performance.
[ ] Past Performance is weighed more heavily than quoted delivery.
(End of Notice)
PGN-13-06 All or None for Simplified Acquisitions (September 2019)
PAGE 3 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION B
SUPPLIES/SERVICES: 3110-00-158-7680
ITEM DESCRIPTION:
PR: 7017147957
NSN or Part Number 001587680
ITEM DESCRIPTION:
BEARING,ROLLER,CYLINDRICAL
RA001: THIS DOCUMENT INCORPORATESTECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OFTECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIEDACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FORLARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATESA FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
PID Text
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003,COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS ANDNON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
INCLUDE ZD080 OBJECT TEXT ID ST
RT001: MEASURING AND TEST EQUIPMENT
THIS IS A SOURCE CONTROLLED ITEM WHICH MUSTBE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSEVENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IFYOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
"SOURCE CONTROL ITEM"
ENGINEEREDARRESTING SYSTEMS CORP.
CAGE: 21439
DWG: 52C2233 REV E P/N: 52C2233-1
APPROVED SOURCE:
ROLLWAY BEARING CORPORATION
CAGE: 51600 REXNORD INDUSTRIES INC. CAGE: 3M084
THE TECHNICAL/QUALITY/TEST REQUIREMENTS FOR
CITED P/N WILL BE IN CONFORMANCE WITH
THELISTED DRAWING.
IDENTIFY TO:
BEARING RESTRICTION:
RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)
AN AWARDFROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING
MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR
EACHBALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING
Page4 /11 Page5 /11
ELEMENTS, RETAINER, INNER RACE, OR OUTERRACE) MANUFACTURED IN THE
UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE
TOTAL COST OF THE BEARING COMPONENTSOF THAT BALL OR ROLLER BEARING. SEE
DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER
BEARINGS.
ACONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL
BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARINGWEBSITE AT
https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN
A COPY OF THE CONTRACTOR’S DECLARATION. PLEASEPRINT, COMPLETE, SIGN AND
HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO
PROVIDE THIS INFORMATION MAY RESULT INYOUR QUOTE NOT BEING CONSIDERD
FOR AWARD.
IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS
SOLICITATION MAY BECANCELLED OR HELD PENDING A WAIVER APPROVAL
REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED
WAIVER FROM THEDOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE
RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS
225.7009-4,WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS.
CRITICAL APPLICATION ITEM
REGAL BELOIT AMERICA, INC. 51600 P/N52C2233-1
CURTISS-WRIGHT FLOW CONTROL SERVICE, 21439 P/N 52C965-2
IAW BASIC DRAWING NR 1X4F3 AMSCBDOC
REVISION NR DTD03/07/2007
PAGE 4 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION B
SUPPLY/SERVICE: 3110-00-158-7680 CONT'D
PART PIECE NUMBER:
IAW REFERENCE QAP 13873 QAP-B02
REVISION NR B DTD 12/11/2013
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .
0001 3110-00-158-7680 513.000 EA $ ________________ $ ________________
BEARING,ROLLER
,CYLINDRICAL
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 179 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNNTHKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ADDITIONAL INFORMATION:
PRESERVATION, PACKAGING, PACKING, AND MARKING
REQUIREMENTS SHALL BE INACCORDANCE WITH
MIL-DTL-197M.
1. METHOD OF PRESERVATION SHALL BE DETERMINED BY
BEARING TYPE AND SIZE (REFER TO TABLE I).
2.PARAGRAPH 3.10.2, SELECTION OF UNIT
PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR
PRESERVATIVE COMPOUND SHALL BEDETERMINED
DEPENDENT UPON BEARING TYPE AND CLOSURE IN
ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II.
FOR PRESERVATION PROCESSCONTROLS, DEPENDANT
UPON BEARING TYPE, CLOSURE, AND LUBRICANT<(>,<)>
PARAGRAPHS 3.4 THROUGH 3.9 APPLY.
3. PACKAGING PRECAUTIONARYMARKING REQUIREMENTS
OF PARAGRAPH 3.12.4 APPLY.
4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE
TO THE QUALITY ASSURANCEVERIFICATION
REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF
MIL-DTL-197M.
...END OF SPECIAL PACKAGING INSTRUCTIONS...
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
PAGE 5 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION B
SUPPLY/SERVICE: 3110-00-158-7680 CONT'D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .
0001 7017147957 0001 N/A N/A N/A 08/28/2027
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION C - SPECIFICATIONS/SOW/SOO/ORD
C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)
SECTION E - INSPECTION AND ACCEPTANCE
52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR
52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) FAR
As prescribed in 46.311, insert the following clause:
(a) The Contractor shall comply with the higher-level quality standard(s) listed below.
Title Number Date Tailoring
[Contracting Officer insert the title, number, date, and tailoring (if any) of the higher-level quality standards.]
(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-
(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
(2) When the technical requirements of a subcontract require-
(i) Control of such things as design, work operations, in-process control, testing, and inspection; or
(ii) Attention to such factors as organization, planning, work instruction, documentation control, and advanced metrology.
(End of Clause)
52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984) FAR
SECTION F - DELIVERIES OR PERFORMANCE
52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR
52.247-60 GUARANTEED SHIPPING CHARACTERISTICS (JAN 2017) FAR
(a) The offeror is requested to complete paragraph (a)(1) of this clause, for each part or component which is packed or packaged separately. This information will be used to determine transportation costs for evaluation purposes. If the offeror does not furnish sufficient data in paragraph (a)(1) of this clause, to permit determination by the Government of the item shipping costs, evaluation will be based on the shipping characteristics submitted by the offeror whose offer produces the highest transportation costs or in the absence thereof, by the Contracting Officer's best estimate of the actual transportation costs. If the item shipping costs, based on the actual shipping characteristics, exceed the item shipping costs used for evaluation purposes, the Contractor agrees that the contract price shall be reduced by an amount equal to the difference between the transportation costs actually incurred, and the costs which would have been incurred if the evaluated shipping characteristics had been accurate.
(1) To be completed by the offeror:
(i) Type of container: Wood Box [ ] Fiber Box [ ], Barrel [ ], Reel [ ], Drum [ ], Other (Specify) ;
(ii) Shipping configuration: Knocked-down [ ], Set-up [ ], Nested [ ], Other (specify) ;
(iii) Size of container: ” (Length), × ” (Width), × ” (Height) = Cubic Ft;
(iv) Number of items per container each;
(v) Gross weight of container and contents Lbs;
(vi) Palletized/skidded [ ] Yes [ ] No;
(vii) Number of containers per pallet/skid ;
(viii) Weight of empty pallet bottom/skid and sides Lbs;
(ix) Size of pallet/skid and contents Lbs Cube ;
(x) Number of containers or pallets/skids per railcar *
(A) Size of railcar
(B) Type of railcar
(xi) Number of containers or pallets/skids per trailer *
(A) Size of trailer Ft
(B) Type of trailer
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION F - DELIVERIES OR PERFORMANCE (CONTINUED)
* Number of complete units (line item) to be shipped in carrier's equipment.
(2) To be completed by the Government after evaluation but before contract award:
(i) Rate used in evaluation ;
(ii) Tender/Tariff ;
(iii) Item .
(b) The guaranteed shipping characteristics requested in paragraph (a)(1) of this clause do not establish actual transportation requirements, which are specified elsewhere in this solicitation. The guaranteed shipping characteristics will be used only for the purpose of evaluating offers and establishing any liability of the successful offeror for increased transportation costs resulting from actual shipping characteristics which differ from those used for evaluation in accordance with paragraph (a) of this clause.
(End of clause)
SECTION G - CONTRACT ADMINISTRATION DATA
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:
(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.
Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.
Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall -
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.
(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) Document type. The Contractor shall submit payment requests using the following document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items -
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table *
Field Name in WAWF Data to be entered in WAWF Guidance
Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a
(SF1449)
(If blank, see resulting award)
Issue By DoDAAC See Block 5 (SF26), 6 (DD 1155), or 9 (SF1449)
(If blank, see resulting award) https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)
Field Name in WAWF Data to be entered in WAWF Guidance
Admin DoDAAC See Block 6 (SF26), 7 (DD 1155), or 16 (SF1449)
(If blank, see resulting award)
Inspect By DoDAAC SEE SECTION B (If blank, see resulting award)
Ship To Code SEE SECTION B (If blank, see resulting award)
Ship From Code SEE SECTION B (If blank, see resulting award)
Mark For Code SEE SECTION B (If blank, see resulting award)
Service Approver (DoDAAC)
(If blank, see resulting award)
Service Acceptor (DoDAAC)
(If blank, see resulting award)
Accept at Other DoDAAC (If blank, see resulting award)
LPO DoDAAC (If blank, see resulting award)
DCAA Auditor DoDAAC (If blank, see resulting award)
Other DoDAAC(s) (If blank, see resulting award)
(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.
(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
See administer listed on page 1
(Contracting Officer: Insert applicable information or “Not applicable.”)
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
SECTION H - SPECIAL CONTRACT REQUIREMENTS
H18 DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM (DPAS) (JUL 2026)
252.223-7001 HAZARD WARNING LABELS (DEC 1991) DFARS
(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.
(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:
(1) Federal Insecticide, Fungicide and Rodenticide Act;
(2) Federal Food, Drug and Cosmetics Act;
(3) Consumer Product Safety Act;
(4) Federal Hazardous Substances Act; or
(5) Federal Alcohol Administration Act.
(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION H - SPECIAL CONTRACT REQUIREMENTS (CONTINUED)
MATERIAL
(If None, Insert “None.”) ACT
(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph
(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.
(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).
SECTION I - CONTRACT CLAUSES
52.202-1 DEFINITIONS (JUN 2020) FAR
52.203-3 GRATUITIES (APR 1984) FAR
52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014) FAR
52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020) FAR
52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT - ALTERNATE I (NOV 2021) FAR
52.203-7 ANTI-KICKBACK PROCEDURES (JUN 2020) FAR
52.203-8 CANCELLATION, RECISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014) FAR
52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014) FAR
52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS (JUN 2020) FAR
52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY
AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR
52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017)
FAR
252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS
252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER DEFENSE-CONTRACT-RELATED FELONIES (JAN
2023) DFARS
252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) DFARS
52.204-13 SYSTEM FOR AWARD MANAGEMENT -- MAINTENANCE (DEVIATION 2026-O0038) (FEB 2026) FAR
52.204-13 SYSTEM FOR AWARD MANAGEMENT -- MAINTENANCE, ALT I (DEVIATION 2026-O0038) (FEB 2026) FAR
52.204-14 SERVICE CONTRACT REPORTING REQUIREMENTS (DEVIATION 2026-O0038) (FEB 2026) FAR
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION I - CONTRACT CLAUSES (CONTINUED)
52.204-15 SERVICE CONTRACT REPORTING REQUIREMENTS FOR INDEFINITE-DELIVERY CONTRACTS (DEVIATION 2026-O0038)
(FEB 2026) FAR
52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0038) (FEB
2026) FAR
252.204-7004 ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS (JAN 2023) DFARS
252.204-7014 LIMITATIONS ON THE USE OR DISCLOSURE OF INFORMATION BY LITIGATION SUPPORT CONTRACTORS (JAN
2023) DFARS
252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT (JAN 2023) DFARS
52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, PROPOSED FOR DEBARMENT, OR VOLUNTARILY EXCLUDED (DEVIATION 2026-O0038) (FEB 2026) FAR
252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE GOVERNMENT OF A COUNTRY
THAT IS A STATE SPONSOR OF TERRORISM (MAY 2019) DFARS
52.211-5 MATERIAL REQUIREMENTS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.215-8 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (DEVIATION 2026-O0038) (FEB 2026) FAR
52.219-28 POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION (DEVIATION 2026-O0038) (FEB 2026) FAR As prescribed in 19.101(a)(2)(iii)(A), insert the following clause:
(a) Definitions. As used in this clause -- Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.
Small business concern --
(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.
(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.
(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:
(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.
(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.
(3) For long-term contracts-
(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and
(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.
(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.
(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition --
(1) Was set aside for small business and has a value above the simplified acquisition threshold;
(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or
(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.
(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or https://www.sba.gov/document/support--table-size-standards
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION I - CONTRACT CLAUSES (CONTINUED)
updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.
(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.
(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:
(1) The Contractor represents that it [] is, [] is not a small business concern under NAICS Code assigned to contract number .
(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause.] The Contractor represents that it [] is, [] is not, a small disadvantaged business concern as defined in 13 CFR 124.1001.
(3) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The Contractor represents that it [] is, [] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]
(4) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The Contractor represents that it [] is, [] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]
(5) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program. The Contractor represents that it [] is, [] is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]
(6) HUBZone joint venture eligible under the HUBZone Program.[ Complete only if the offeror is a HUBZone small business concern. ] The offeror represents, as part of its offer, that it [] is, [] is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: . ] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [ Contractor to sign and date and insert authorized signer's name and title. ]
52.219-28 POST AWARD SMALL BUSINESS PROGRAM REREPRESENTATION, ALT I (DEVIATION 2026-O0038) (FEB 2026) FAR Alternate I. As prescribed in 19.101(a)(2)(iii)(B), substitute the following paragraph (g)(1) for paragraph (g)(1) of the basic clause:
(g)(1) The Contractor represents its small business size status for each one of the NAICS codes assigned to this contract.
NAICS CODE
SMALL BUSINESS
CONCERN
(YES/NO)
[Contracting Officer to insert NAICS codes.]
52.222-19 CHILD LABOR - COOPERATION WITH AUTHORITIES AND REMEDIES (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-35 EQUAL OPPORTUNITY FOR VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (DEVIATION 2026-O0038) (FEB 2026), ALT I (JUL 2014)
Alternate I. As prescribed in 22.1401-2(a)(2), add the following as a preamble to the clause:
Notice: The following term(s) of this clause are waived for this contract: [List term(s)].
52.222-37 EMPLOYMENT REPORTS ON VETERANS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR RELATIONS ACT (DEVIATION 2026-O0038)
52.222-50 COMBATING TRAFFICKING IN PERSONS (DEVIATION 2026-O0038) (FEB 2026) FAR
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION I - CONTRACT CLAUSES (CONTINUED)
52.222-62 PAID SICK LEAVE UNDER EXECUTIVE ORDER 13706 (DEVIATION 2026-O0038) (FEB 2026) FAR
52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (DEVIATION 2026-O0040, REVISION 1) (APR 2026)
52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND SAFETY DATA (DEVIATION 2026-O0038) (FEB 2026) FAR As prescribed in 23.304(a)(1), insert the following clause:
(a) Hazardous material, as used in this clause, includes any material defined as hazardous under the latest version of Federal Standard No. 313 (including revisions adopted during the term of the contract).
(b) The Offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number. This information shall also be included on the Safety Data Sheet submitted under this contract.
Material (If none, insert None)
Identification No.
(c) This list must be updated during performance of the contract whenever the Contractor determines that any other material to be delivered under this contract is hazardous.
(d) The apparently successful offeror agrees to submit, for each item as required prior to award, a Safety Data Sheet, meeting the requirements of 29 CFR 1910.1200(g) and the latest version of Federal Standard No. 313, for all hazardous material identified in paragraph (b) of this clause. Data shall be submitted in accordance with Federal Standard No. 313, whether or not the apparently successful offeror is the actual manufacturer of these items. Failure to submit the Safety Data Sheet prior to award may result in the apparently successful offeror being considered nonresponsible and ineligible for award.
(e) If, after award, there is a change in the composition of the item(s) or a revision to Federal Standard No. 313, which renders incomplete or inaccurate the data submitted under paragraph (d) of this clause, the Contractor shall promptly notify the Contracting Officer and resubmit the data.
(f) Neither the requirements of this clause nor any act or failure to act by the Government shall relieve the Contractor of any responsibility or liability for the safety of Government, Contractor, or subcontractor personnel or property.
(g) Nothing contained in this clause shall relieve the Contractor from complying with applicable Federal, State, and local laws, codes, ordinances, and regulations (including the obtaining of licenses and permits) in connection with hazardous material.
(h) The Government's rights in data furnished under this contract with respect to hazardous material are as follows:
(1) To use, duplicate and disclose any data to which this clause is applicable. The purposes of this right are to --
(i) Apprise personnel of the hazards to which they may be exposed in using, handling, packaging, transporting, or disposing of hazardous materials;
(ii) Obtain medical treatment for those affected by the material; and
(iii) Have others use, duplicate, and disclose the data for the Government for these purposes.
(2) To use, duplicate, and disclose data furnished under this clause, in accordance with subparagraph (h)(1) of this clause, in precedence over any other clause of this contract providing for rights in data.
(3) The Government is not precluded from using similar or identical data acquired from other sources.
52.223-7 NOTICE OF RADIOACTIVE MATERIALS (DEVIATION 2026-O0038) (FEB 2026) FAR
As prescribed in 23.304(b), insert the following clause:
(a) The Contractor shall notify the Contracting Officer or designee, in writing, *days prior to the delivery of, or prior to completion of any servicing required by this contract of, items containing either (1) radioactive material requiring specific licensing under the regulations issued pursuant to the Atomic Energy Act of 1954, as amended, as set forth in title 10 of the Code of Federal Regulations, in effect on the date of this contract, or (2) other radioactive material not requiring specific licensing in which the specific activity is greater than 0.002 microcuries per gram or the activity per item equals or exceeds 0.01 microcuries. Such notice shall specify the part or parts of the items which contain radioactive materials, a description of the materials, the name and activity of the isotope, the manufacturer of the materials, and any other information known to the Contractor which will put users of the items on notice as to the hazards involved.
(b) If there has been no change affecting the quantity of activity, or the characteristics and composition of the radioactive material from deliveries under this contract or prior contracts, the Contractor may request that the Contracting Officer or designee waive the notice requirement in paragraph (a) of this clause.
Any such request shall --
(1) Be submitted in writing;
(2) State that the quantity of activity, characteristics, and composition of the radioactive material have not changed; and
(3) Cite the contract number on which the prior notification was submitted and the contracting office to which it was submitted.
(c) All items, parts, or subassemblies which contain radioactive materials in which the specific activity is greater than 0.002 microcuries per gram or activity per item equals or exceeds 0.01 microcuries, and all containers in which such items, parts or subassemblies are delivered to the Government shall be clearly marked and labeled as required by the latest revision of MIL-STD 129 in effect on the date of the contract.
(d) This clause, including this paragraph (d), shall be inserted in all subcontracts for radioactive materials meeting the criteria in paragraph (a) of this clause.
* The Contracting Officer shall insert the number of days required in advance of delivery of the item or completion of the servicing to assure that required
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 26 PAGES
SPE4A6-27-Q-0326
SECTION I - CONTRACT CLAUSES (CONTINUED)
licenses are obtained and appropriate personnel are notified to institute any necessary safety and health precautions.
52.223-23 SUSTAINABLE PRODUCTS (DEVIATION 2026-O0038) (FEB 2026) FAR
252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEP
2014) DFARS
252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - ALTERNATE I
(SEP 2014) DFARS
252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023) DFARS
252.223-7009 PROHIBITION OF PROCUMENT OF FLOURINATED AQUEOUS FILM-FORMING FOAM FIRE-FIGHTING AGENT FOR
USE ON MILITARY INSTALLATIONS (MAR 2024) FAR
252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM (FEB 2024) DFARS
252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM, ALT II (FEB 2024) DFARS
252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (MAR 2022) DFARS
252.225-7006 ACQUISITION OF THE AMERICAN FLAG (DEC 2022) DFARS
252.225-7008 RESTRICTION ON ACQUISITION OF SPECIALTY METALS (MAR 2013) DFARS
252.225-7009 RESTRICTION ON ACQUISITION OF CERTAIN ARTICLES CONTAINING SPECIALTY METALS (JAN 2023) DFARS
252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (APR 2022) DFARS
252.225-7013 DUTY-FREE ENTRY (OCT 2025) DFARS
252.225-7015 RESTRICTION ON ACQUISITION OF HAND OR MEASURING TOOLS (JUN 2005) DFARS
252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) DFARS
252.225-7060 PROHIBITION ON CERTAIN PROCUREMENTS FROM THE XINJIANG UYGHUR AUTONOMOUS REGION (JUN 2023)
DFARS
52.226-8 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (MAY 2024) FAR
52.229-3 FEDERAL, STATE, AND LOCAL TAXES (FEB 2013) FAR
52.232-1 PAYMENTS (APR 1984) FAR
52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002) FAR
52.232-11 EXTRAS (APR 1984) FAR
52.232-17 INTEREST (MAY 2014) FAR
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 26 PAGES
SPE4A6-27-Q-0326
52.232-23 ASSIGNMENT OF CLAIMS (MAY 2014) FAR
52.232-25 PROMPT PAYMENT (JAN 2017) FAR
52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER-SYSTEM FOR AWARD MANAGEMENT (OCT 2018) FAR
52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (MAR 2023) FAR
252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) DFARS
252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) DFARS
52.233-1 DISPUTES (MAY 2014) FAR
52.233-3 PROTEST AFTER AWARD (DEVIATION 2026-O0038) (FEB 2026) FAR
52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004) FAR
5452.233-9001 DISPUTES - AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (JUN 2020) DLAD
(a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute.
(b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the Contractor (see Federal Acquisition Regulation (FAR) clause 52.233-1), or, for the Agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal. Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate.
(c) The offeror should check here to opt out of this clause:
[ ] Alternate wording may be negotiated with the contracting officer.
52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (DEVIATION 2026-O0038) (FEB 2026) FAR
52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS, ALT I (DEVIATION 2026-O0038) (FEB 2026) FAR Alternate I As prescribed in 40.205(b), substitute the following paragraph (e)(1) for paragraph (e)(1) of the basic clause:
(e) Governmentwide exclusion and removal orders.
(1) Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by any applicable FASCSA orders identified by the checkbox(es) in this paragraph (e) (1). [Contracting Officer must select either “yes” or “no” for each of the following types of FASCSA orders:] Yes [] No [] DHS FASCSA Order Yes [] No [] DoD FASCSA Order Yes [] No [] DNI FASCSA Order
252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) DFARS
252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS
252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT
INFORMATION (JAN 2023) DFARS
252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (DEVIATION 2026-O0025)
(JUN 2026) DFARS
252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 26 PAGES
SPE4A6-27-Q-0326
(JAN 2023) DFARS
252.225-7051 PROHIBITION ON ACQUISITION OF CERTAIN FOREIGN COMMERCIAL SATELLITE SERVICES (DEC 2022) DFARS
252.240-7995 PROHIBITION ON CONTRACT AWARDS WITH ENTITIES THAT CONTRACT WITH LOBBYISTS FOR CHINESE
MILITARY COMPANIES -- REPRESENTATION (DEVIATION 2026-O0025) (SEP 2026) DFARS
Standard Element ZB_240_7999 has no Title
52.242-13 BANKRUPTCY (JUL 1995) FAR
52.243-1 CHANGES - FIXED PRICE (AUG 1987) FAR
252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) DFARS
252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENT (DEC 2022) DFARS
As prescribed in 243.305-71, use the following clause:
(a) The amount of any request for equitable adjustment to contract terms shall accurately reflect the contract adjustment for which the Contractor believes the Government is liable. The request shall include only costs for performing the change, and shall not include any costs that already have been reimbursed or that have been separately claimed. All indirect costs included in the request shall be properly allocable to the change in accordance with applicable acquisition regulations.
(b) In accordance with 10 U.S.C. 3862(a), any request for equitable adjustment to contract terms that exceeds the simplified acquisition threshold shall bear, at the time of submission, the following certificate executed by an individual authorized to certify the request on behalf of the Contractor:
I certify that the request is made in good faith, and that the supporting data are accurate and complete to the best of my knowledge and belief.
(Official's Name)
(Title)
(c) The certification in paragraph (b) of this clause requires full disclosure of all relevant facts, including --
(1) Certified cost or pricing data if required in accordance with subsection 15.403-4 of the Federal…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .