PID_PACK.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:010984880

BUSHING,SLEEVE

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:ZD064

QOQC APPLIES

REFERENCE NUMBER:ZD090

P/N: 70150-09137-101

REFERENCE NUMBER:A0003

REFERENCE NUMBER:CS001

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 78286 70150-09137

REVISION NR A3 DTD 11/07/1985

PART PIECE NUMBER: 70150-09137-101

IAW REFERENCE DRAWING NR 78286 SS8423

REVISION NR 05 DTD 07/08/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8798

REVISION NR 17 DTD 04/28/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8806

REVISION NR 13 DTD 06/17/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70150-09137

REVISION NR B DTD 10/23/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70150-09137

REVISION NR DTD 02/22/1977

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 QAP-B02

REVISION NR B DTD 12/11/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81996 70150-09137

REVISION NR E DTD 09/13/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70009-02001

REVISION NR M DTD 08/14/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS5100

REVISION NR 39 DTD 10/27/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS9208

REVISION NR 55 DTD 04/14/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70009-02001

REVISION NR M DTD 04/27/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81996 70150-09137-101

REVISION NR DTD 04/10/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8423

REVISION NR 5- DTD 01/09/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8423

REVISION NR 5- DTD 08/15/2000

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 CDRL-COQC-19071

REVISION NR DTD 03/12/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8423

REVISION NR 05 DTD 06/06/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8423

REVISION NR 5- DTD 01/29/2007

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ006

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER CS001

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries.

DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.

In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil.

DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses.

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER ZD064

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

REFERENCE NUMBER ZD090

Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) they can also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND

QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

REFERENCE NUMBER A0003

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY