SF30_SPE4A613R121400031.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO.

See Block 14

4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE SPE4A6 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE FACILITY CODE

SPE4A613R1214

X

2013 NOV 12

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of OffersX is extended, is not extended.

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

12. ACCOUNTING AND APPROPRIATION DATA (If required)

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

X

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc. ) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

E. IMPORTANT: Contractor is not, X is required to sign this document and return 1 copies to issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A NAME AND TITLE OF SIGNER (Type or print)

NSN 7540-01-152-8070

Previous edition unusable

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

16B. UNITED STATES OF AMERICA15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

(a) By completing Items 8 and 15, and returning

DLA AVIATION

ASC COMMODITIES DIVISION

RICHMOND VA 23297

USA

15C. DATE SIGNED 16C. DATE SIGNED

D. OTHER (Specify type of modification and authority)

SEE BLOCK 16C

3. EFFECTIVE DATE

See Attached Continuation Sheet(s).

(X)

CHECK ONE

PAGE OF PAGES

9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CONTINUED ON NEXT PAGE

THIS AMENDMENT IS ISSUED TO ADD THE FOLLOWING CLAUSE TO SOLICITATION SPE4A613R1214:

DFARs clause 252.211-7006, Passive Radio Frequency Identification, is now incorporated by reference.

ALL OTHER TERMS AND CONDITIONS REMAIN THE SAME

PAGE 2 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SPE4A613R1214-0003

SECTION B

SUPPLIES/SERVICES: 6830-01-558-9658

ITEM DESCRIPTION:

ACETYLENE, FULL CYLINDER

SHIPPING NAME: ACETYLENE, DISSOLVED

HAZARD CLASS/DIVISION: 2.1, I.D. NO. UN1001

LABEL REQUIRED: FLAMMABLE GAS

UNIT CYLINDER CONTAINS 10 CU FT.

THE FOLLOWING GOVT OWNED CYLINDER SHALL BE

FURNISHED FOR FILLING:

CYLINDER NSN 8120-00-285-4733.

TECH DATA AVAILABILITY:

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY/FEDERAL

SPECIFICATIONS/STANDARDS AND/OR VOLUNTARY

INDUSTRY) STANDARDS. REFER TO SECTION L, CLAUSE

52.211-9G13 FOR OBTAINING SUCH DATA.

MSDS AND OSHA HAZARD WARNING LABEL ARE

REQUIRED.THE MSDS AND HAZARD WARNING

LABEL MUST BE REVIEWED AND APPROVED BY

TECHNICAL PERSONNEL BEFORE CONTRACT

AWARD. THE APPROVED MSDS AND LABEL MUST

THEN BE PLACED ON THE CONTRACT FILE AND

A COPY FORWARDED TO THE DSCR HMIRS OFFICE

(DSCR-VBA).

SAMPLING:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE

FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

OCONUS CENTCOM NSN

PACKAGING IAW D.O.T. REQUIREMENTS FOR

DOMESTIC SHIPMENTS. EXPORT SHIPMENTS

SHALL BE PACKAGED IAW U.N. REQUIREMENTS.

IN ADDITION TO THE PACKAGING REQUIREMENTS

INCLUDED IN THE COMMODITY SPECIFICATION LISTED

BELOW, THE SUPPLIES SHALL COMPLY WITH APPLICABLE

PACKAGING REQUIREMENTS OF THE LATEST EDITION OF

THE INTERNATIONAL CIVIL AVIATION ORGANIZATION

PAGE 3 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 6830-01-558-9658 CONT'D

(ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE

TRANSPORT OF DANGEROUS GOODS BY AIR, THE

INTERNATIONAL MARITIME DANGEROUS GOODS CODE

(IMDG CODE), TITLE FORTY-NINE OF THE CODE OF

FEDERAL REGULATIONS (49 CFR), AND AIR FORCE

JOINT MANUAL (AFJMAN) 24-204, PREPARING

HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENTS.

TO THE EXTENT THAT THERE IS CONFLICT BETWEEN THE

REQUIREMENTS OF THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA LISTED BELOW AND THE

REQUIREMENTS OF ICAO AND IMDG, THE PROVISIONS IN

ICAO AND IMDG WILL CONTROL OVER THE CONFLICTING

PROVISIONS IN THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA.

UNLESS OTHERWISE SPECIFIED BY THE PROCURING

ACTIVITY, INTERIOR AND EXTERIOR CONTAINERS OF

HAZARDOUS MATERIAL SHALL BE PROPERLY CLASSIFIED,

DOCUMENTED, CERTIFIED, DESCRIBED, PACKAGED,

MARKED, AND LABELED IN ACCORDANCE WITH ICAO,

IMDG, 49 CFR, AFJMAN 24-204, AND MIL-STD-129.

BECAUSE THE ICAO AND IMDG PUBLICATIONS ARE NOT

PUBLISHED BY THE U.S. GOVERNMENT PRINTING

OFFICE, A LIST OF SOURCES, INCLUDING PRIVATE

COMPANIES, WHERE THE PUBLICATIONS MAY BE

OBTAINED IS ALSO PROVIDED. THE COMPANIES CITED

BELOW ARE PROVIDED FOR YOUR INFORMATION AND

MENTION OF THESE COMPANIES DOES NOT INDICATE

ENDORSEMENT BY THE DEFENSE GENERAL SUPPLY

CENTER. THIS LIST IS NOT INCLUSIVE OF ALL

COMPANIES WHICH MAY BE ABLE TO PROVIDE

THESE REQUIRED PUBLICATIONS.

LABELMASTER

5724 N. PULASKI ROAD

CHICAGO, IL 60646

1-800-621-5808

UNITED NATIONS PUB.

ROOM DC 2-853

NEW YORK, NY 10017

212-963-8302

UNZ AND COMPANY

190 BALDWIN AVE

JERSEY CITY, NJ 07306

1-800-631-3098.

UNIPUB

4611-F ASSEMBLY DRIVE

LANHAM, MD 20706

301-459-7666

PAGE 4 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

NEW YORK NAUTICAL INSTRUMENT AND SERVICE

140 W. BROADWAY

NEW YORK, NY 10013

212-962-4522

ALL PERFORMANCE TEST REQUIREMENTS SHALL BE

SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING

TO THE DATE AND DATA RESULTS OBTAINED FROM

PERFORMANCE ORIENTED PACKAGING TESTING. THE

CONTRACTOR AS THE CERTIFIER SHALL BE RESPONSIBLE

FOR PROVIDING TESTING SERVICES. CONTRACTORS

WHICH DO NOT SELF CERTIFY SHALL BE RESPONSIBLE

FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING

PERFORMANCE TESTING SERVICES ARE IN FACT

REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION

(DOT). PERFORMANCE ORIENTED PACKAGING IS

APPLICABLE TO ALL CLASSES OF HAZARDOUS MATERIALS

EXCLUDING RADIOACTIVE MATERIAL, CYLINDERS AND

OTHER RECEPTACLES FOR COMPRESSED GASES,

PACKAGING WITH A NET MASS EXCEEDING 882 POUNDS

AND PACKAGES WITH A CAPACITY EXCEEDING 118.8

GALLONS. ALL CERTIFICATES AND REPORTS SHALL BE

AVAILABLE FOR INSPECTION BY AN AUTHORIZED

GOVERNMENT REPRESENTATIVE FOR A PERIOD OF NOT

LESS THAN 3 YEARS.

IAW BASIC UNK BB-A-106D

REVISION NR D DTD 12/27/2010

PART PIECE NUMBER: GRADE B

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 6830-01-558-9658 36.000 CY $ ________________ $ ________________

ACETYLENE

,TECHNICAL

PRICING TERMS: Fixed Price with Economic Price Adjustment

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 7 DAYS ADO

PREP FOR DELIVERY:

PAGE 5 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence.

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 1000011747 0001 N/A N/A N/A N/A

SUPPLIES/SERVICES: 6830-01-558-9668

SHIPPING NAME: ACETYLENE, DISSOLVED

HAZARD CLASS/DIVISION: 2.1, I.D. NO. UN1001

LABEL REQUIRED: FLAMMABLE GAS

UNIT CYLINDER CONTAINS 40 CU FT.

GFM: CYLINDER NSN 8120-00-663-3019

TECH DATA AVAILABILITY:

PAGE 6 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 6830-01-558-9668 CONT'D

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY/FEDERAL

SPECIFICATIONS/STANDARDS AND/OR VOLUNTARY

INDUSTRY) STANDARDS. REFER TO SECTION L, CLAUSE

52.211-9G13 FOR OBTAINING SUCH DATA.

MSDS AND OSHA HAZARD WARNING LABEL ARE

REQUIRED.THE MSDS AND HAZARD WARNING

LABEL MUST BE REVIEWED AND APPROVED BY

TECHNICAL PERSONNEL BEFORE CONTRACT

AWARD. THE APPROVED MSDS AND LABEL MUST

THEN BE PLACED ON THE CONTRACT FILE AND

A COPY FORWARDED TO THE DSCR HMIRS OFFICE

(DSCR-VBA).

SAMPLING:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

PACKAGING IAW D.O.T. REQUIRMENTS FOR

CON/DOMESTIC SHIPMENTS. EXPORT

SHIPMENTS SHALL BE PACKAGED IAW

U.N. REQUIREMENTS.

BELOW, THE SUPPLIES SHALL COMPLY WITH APPLICABLE

PACKAGING REQUIREMENTS OF THE LATEST EDITION OF

THE INTERNATIONAL CIVIL AVIATION ORGANIZATION

(ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE

TRANSPORT OF DANGEROUS GOODS BY AIR, THE

INTERNATIONAL MARITIME DANGEROUS GOODS CODE

(IMDG CODE), TITLE FORTY-NINE OF THE CODE OF

FEDERAL REGULATIONS (49 CFR), AND AIR FORCE

JOINT MANUAL (AFJMAN) 24-204, PREPARING

HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENTS.

TO THE EXTENT THAT THERE IS CONFLICT BETWEEN THE

REQUIREMENTS OF THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA LISTED BELOW AND THE

REQUIREMENTS OF ICAO AND IMDG, THE PROVISIONS IN

ICAO AND IMDG WILL CONTROL OVER THE CONFLICTING

PROVISIONS IN THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA.

UNLESS OTHERWISE SPECIFIED BY THE PROCURING

PAGE 7 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

ACTIVITY, INTERIOR AND EXTERIOR CONTAINERS OF

HAZARDOUS MATERIAL SHALL BE PROPERLY CLASSIFIED,

DOCUMENTED, CERTIFIED, DESCRIBED, PACKAGED,

MARKED, AND LABELED IN ACCORDANCE WITH ICAO,

IMDG, 49 CFR, AFJMAN 24-204, AND MIL-STD-129.

BECAUSE THE ICAO AND IMDG PUBLICATIONS ARE NOT

PUBLISHED BY THE U.S. GOVERNMENT PRINTING

OFFICE, A LIST OF SOURCES, INCLUDING PRIVATE

COMPANIES, WHERE THE PUBLICATIONS MAY BE

OBTAINED IS ALSO PROVIDED. THE COMPANIES CITED

BELOW ARE PROVIDED FOR YOUR INFORMATION AND

MENTION OF THESE COMPANIES DOES NOT INDICATE

ENDORSEMENT BY THE DEFENSE GENERAL SUPPLY

CENTER. THIS LIST IS NOT INCLUSIVE OF ALL

COMPANIES WHICH MAY BE ABLE TO PROVIDE

THESE REQUIRED PUBLICATIONS.

LABELMASTER

5724 N. PULASKI ROAD

CHICAGO, IL 60646

1-800-621-5808

UNITED NATIONS PUB.

ROOM DC 2-853

NEW YORK, NY 10017

212-963-8302

UNZ AND COMPANY

190 BALDWIN AVE

JERSEY CITY, NJ 07306

1-800-631-3098.

UNIPUB

4611-F ASSEMBLY DRIVE

LANHAM, MD 20706

301-459-7666

NEW YORK NAUTICAL INSTRUMENT AND SERVICE

140 W. BROADWAY

NEW YORK, NY 10013

212-962-4522

ALL PERFORMANCE TEST REQUIREMENTS SHALL BE

SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING

TO THE DATE AND DATA RESULTS OBTAINED FROM

PERFORMANCE ORIENTED PACKAGING TESTING. THE

CONTRACTOR AS THE CERTIFIER SHALL BE RESPONSIBLE

FOR PROVIDING TESTING SERVICES. CONTRACTORS

WHICH DO NOT SELF CERTIFY SHALL BE RESPONSIBLE

FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING

PERFORMANCE TESTING SERVICES ARE IN FACT

REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION

PAGE 8 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

(DOT). PERFORMANCE ORIENTED PACKAGING IS

APPLICABLE TO ALL CLASSES OF HAZARDOUS MATERIALS

EXCLUDING RADIOACTIVE MATERIAL, CYLINDERS AND

OTHER RECEPTACLES FOR COMPRESSED GASES,

PACKAGING WITH A NET MASS EXCEEDING 882 POUNDS

AND PACKAGES WITH A CAPACITY EXCEEDING 118.8

GALLONS. ALL CERTIFICATES AND REPORTS SHALL BE

AVAILABLE FOR INSPECTION BY AN AUTHORIZED

GOVERNMENT REPRESENTATIVE FOR A PERIOD OF NOT

LESS THAN 3 YEARS.

IAW BASIC UNK BB-A-106D

REVISION NR D DTD 10/03/2006

0002 6830-01-558-9668 52.000 CY $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 7 DAYS ADO

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping

PAGE 9 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be

ITEM PR PRLI PR PRLI Material Need Ship Date .

0002 1000011747 0002 N/A N/A N/A N/A

SUPPLIES/SERVICES: 6830-01-558-9849

SHIPPING NAME: ACETYLENE, DISSOLVED

HAZARD CLASS/DIVISION: 2.1, I.D. NO. UN1001

REQUIRED LABEL: FLAMMABLE GAS

UNIT CYLINDER CONTAINS 190 CU FT.

GFM: CYLINDER NSN 8120-00-597-5670

TECH DATA AVAILABILITY:

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY/FEDERAL

SPECIFICATIONS/STANDARDS AND/OR VOLUNTARY

INDUSTRY) STANDARDS. REFER TO SECTION L, CLAUSE

52.211-9G13 FOR OBTAINING SUCH DATA.

OCONUS CENTCOM NSN.

MSDS

MSDS AND OSHA HAZARD WARNING LABEL ARE

REQUIRED.THE MSDS AND HAZARD WARNING

LABEL MUST BE REVIEWED AND APPROVED BY

TECHNICAL PERSONNEL BEFORE CONTRACT

AWARD. THE APPROVED MSDS AND LABEL MUST

THEN BE PLACED ON THE CONTRACT FILE AND

A COPY FORWARDED TO THE DSCR HMIRS OFFICE

(DSCR-VBA).

PAGE 10 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 6830-01-558-9849 CONT'D

SAMPLING:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE

CON/DOMESTIC SHIPMENTS. EXPORT

SHIPMENTS SHALL BE PACKAGED IAW

U.N. REQUIREMENTS.

IN ADDITION TO THE PACKAGING REQUIREMENTS

INCLUDED IN THE COMMODITY SPECIFICATION LISTED

BELOW, THE SUPPLIES SHALL COMPLY WITH APPLICABLE

PACKAGING REQUIREMENTS OF THE LATEST EDITION OF

THE INTERNATIONAL CIVIL AVIATION ORGANIZATION

(ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE

TRANSPORT OF DANGEROUS GOODS BY AIR, THE

INTERNATIONAL MARITIME DANGEROUS GOODS CODE

(IMDG CODE), TITLE FORTY-NINE OF THE CODE OF

FEDERAL REGULATIONS (49 CFR), AND AIR FORCE

JOINT MANUAL (AFJMAN) 24-204, PREPARING

HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENTS.

TO THE EXTENT THAT THERE IS CONFLICT BETWEEN THE

REQUIREMENTS OF THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA LISTED BELOW AND THE

REQUIREMENTS OF ICAO AND IMDG, THE PROVISIONS IN

ICAO AND IMDG WILL CONTROL OVER THE CONFLICTING

PROVISIONS IN THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA.

UNLESS OTHERWISE SPECIFIED BY THE PROCURING

ACTIVITY, INTERIOR AND EXTERIOR CONTAINERS OF

HAZARDOUS MATERIAL SHALL BE PROPERLY CLASSIFIED,

DOCUMENTED, CERTIFIED, DESCRIBED, PACKAGED,

MARKED, AND LABELED IN ACCORDANCE WITH ICAO,

IMDG, 49 CFR, AFJMAN 24-204, AND MIL-STD-129.

BECAUSE THE ICAO AND IMDG PUBLICATIONS ARE NOT

PUBLISHED BY THE U.S. GOVERNMENT PRINTING

OFFICE, A LIST OF SOURCES, INCLUDING PRIVATE

COMPANIES, WHERE THE PUBLICATIONS MAY BE

OBTAINED IS ALSO PROVIDED. THE COMPANIES CITED

BELOW ARE PROVIDED FOR YOUR INFORMATION AND

MENTION OF THESE COMPANIES DOES NOT INDICATE

ENDORSEMENT BY THE DEFENSE GENERAL SUPPLY

CENTER. THIS LIST IS NOT INCLUSIVE OF ALL

COMPANIES WHICH MAY BE ABLE TO PROVIDE

PAGE 11 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

THESE REQUIRED PUBLICATIONS.

LABELMASTER

5724 N. PULASKI ROAD

CHICAGO, IL 60646

1-800-621-5808

UNITED NATIONS PUB.

ROOM DC 2-853

NEW YORK, NY 10017

212-963-8302

UNZ AND COMPANY

190 BALDWIN AVE

JERSEY CITY, NJ 07306

1-800-631-3098.

UNIPUB

4611-F ASSEMBLY DRIVE

LANHAM, MD 20706

301-459-7666

NEW YORK NAUTICAL INSTRUMENT AND SERVICE

140 W. BROADWAY

NEW YORK, NY 10013

212-962-4522

ALL PERFORMANCE TEST REQUIREMENTS SHALL BE

SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING

TO THE DATE AND DATA RESULTS OBTAINED FROM

PERFORMANCE ORIENTED PACKAGING TESTING. THE

CONTRACTOR AS THE CERTIFIER SHALL BE RESPONSIBLE

FOR PROVIDING TESTING SERVICES. CONTRACTORS

WHICH DO NOT SELF CERTIFY SHALL BE RESPONSIBLE

FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING

PERFORMANCE TESTING SERVICES ARE IN FACT

REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION

(DOT). PERFORMANCE ORIENTED PACKAGING IS

APPLICABLE TO ALL CLASSES OF HAZARDOUS MATERIALS

EXCLUDING RADIOACTIVE MATERIAL, CYLINDERS AND

OTHER RECEPTACLES FOR COMPRESSED GASES,

PACKAGING WITH A NET MASS EXCEEDING 882 POUNDS

AND PACKAGES WITH A CAPACITY EXCEEDING 118.8

GALLONS. ALL CERTIFICATES AND REPORTS SHALL BE

AVAILABLE FOR INSPECTION BY AN AUTHORIZED

GOVERNMENT REPRESENTATIVE FOR A PERIOD OF NOT

LESS THAN 3 YEARS.

IAW BASIC UNK BB-A-106D

PAGE 12 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

0003 6830-01-558-9849 22.000 CY $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 7 DAYS ADO

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be

PAGE 13 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

ITEM PR PRLI PR PRLI Material Need Ship Date .

0003 1000011747 0003 N/A N/A N/A N/A

SUPPLIES/SERVICES: 6830-01-558-9852

SHIPPING NAME: ACETYLENE, DISSOLVED

HAZARD CLASS/DIVISION: 2.1, I.D. NO. UN1001

REQUIRED LABEL: FLAMMABLE GAS

UNIT CYLINDER CONTAINS 225 CU FT.

GFM: CYLINDER NSN 8120-00-268-3360

TECH DATA AVAILABILITY:

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY/FEDERAL

SPECIFICATIONS/STANDARDS AND/OR VOLUNTARY

INDUSTRY) STANDARDS. REFER TO SECTION L, CLAUSE

52.211-9G13 FOR OBTAINING SUCH DATA.

MSDS

MSDS AND OSHA HAZARD WARNING LABEL ARE

REQUIRED.THE MSDS AND HAZARD WARNING

LABEL MUST BE REVIEWED AND APPROVED BY

TECHNICAL PERSONNEL BEFORE CONTRACT

AWARD. THE APPROVED MSDS AND LABEL MUST

THEN BE PLACED ON THE CONTRACT FILE AND

A COPY FORWARDED TO THE DSCR HMIRS OFFICE

(DSCR-VBA).

SAMPLING:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE

PAGE 14 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 6830-01-558-9852 CONT'D

CON/DOMESTIC SHIPMENTS. EXPORT

SHIPMENTS SHALL BE PACKAGED IAW

U.N. REQUIREMENTS.

IN ADDITION TO THE PACKAGING REQUIREMENTS

INCLUDED IN THE COMMODITY SPECIFICATION LISTED

BELOW, THE SUPPLIES SHALL COMPLY WITH APPLICABLE

PACKAGING REQUIREMENTS OF THE LATEST EDITION OF

THE INTERNATIONAL CIVIL AVIATION ORGANIZATION

(ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE

TRANSPORT OF DANGEROUS GOODS BY AIR, THE

INTERNATIONAL MARITIME DANGEROUS GOODS CODE

(IMDG CODE), TITLE FORTY-NINE OF THE CODE OF

FEDERAL REGULATIONS (49 CFR), AND AIR FORCE

JOINT MANUAL (AFJMAN) 24-204, PREPARING

HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENTS.

TO THE EXTENT THAT THERE IS CONFLICT BETWEEN THE

REQUIREMENTS OF THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA LISTED BELOW AND THE

REQUIREMENTS OF ICAO AND IMDG, THE PROVISIONS IN

ICAO AND IMDG WILL CONTROL OVER THE CONFLICTING

PROVISIONS IN THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA.

UNLESS OTHERWISE SPECIFIED BY THE PROCURING

ACTIVITY, INTERIOR AND EXTERIOR CONTAINERS OF

HAZARDOUS MATERIAL SHALL BE PROPERLY CLASSIFIED,

DOCUMENTED, CERTIFIED, DESCRIBED, PACKAGED,

MARKED, AND LABELED IN ACCORDANCE WITH ICAO,

IMDG, 49 CFR, AFJMAN 24-204, AND MIL-STD-129.

BECAUSE THE ICAO AND IMDG PUBLICATIONS ARE NOT

PUBLISHED BY THE U.S. GOVERNMENT PRINTING

OFFICE, A LIST OF SOURCES, INCLUDING PRIVATE

COMPANIES, WHERE THE PUBLICATIONS MAY BE

OBTAINED IS ALSO PROVIDED. THE COMPANIES CITED

BELOW ARE PROVIDED FOR YOUR INFORMATION AND

MENTION OF THESE COMPANIES DOES NOT INDICATE

ENDORSEMENT BY THE DEFENSE GENERAL SUPPLY

CENTER. THIS LIST IS NOT INCLUSIVE OF ALL

COMPANIES WHICH MAY BE ABLE TO PROVIDE

THESE REQUIRED PUBLICATIONS.

LABELMASTER

5724 N. PULASKI ROAD

CHICAGO, IL 60646

1-800-621-5808

UNITED NATIONS PUB.

ROOM DC 2-853

NEW YORK, NY 10017

212-963-8302

PAGE 15 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

UNZ AND COMPANY

190 BALDWIN AVE

JERSEY CITY, NJ 07306

1-800-631-3098.

UNIPUB

4611-F ASSEMBLY DRIVE

LANHAM, MD 20706

301-459-7666

NEW YORK NAUTICAL INSTRUMENT AND SERVICE

140 W. BROADWAY

NEW YORK, NY 10013

212-962-4522

ALL PERFORMANCE TEST REQUIREMENTS SHALL BE

SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING

TO THE DATE AND DATA RESULTS OBTAINED FROM

PERFORMANCE ORIENTED PACKAGING TESTING. THE

CONTRACTOR AS THE CERTIFIER SHALL BE RESPONSIBLE

FOR PROVIDING TESTING SERVICES. CONTRACTORS

WHICH DO NOT SELF CERTIFY SHALL BE RESPONSIBLE

FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING

PERFORMANCE TESTING SERVICES ARE IN FACT

REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION

(DOT). PERFORMANCE ORIENTED PACKAGING IS

APPLICABLE TO ALL CLASSES OF HAZARDOUS MATERIALS

EXCLUDING RADIOACTIVE MATERIAL, CYLINDERS AND

OTHER RECEPTACLES FOR COMPRESSED GASES,

PACKAGING WITH A NET MASS EXCEEDING 882 POUNDS

AND PACKAGES WITH A CAPACITY EXCEEDING 118.8

GALLONS. ALL CERTIFICATES AND REPORTS SHALL BE

AVAILABLE FOR INSPECTION BY AN AUTHORIZED

IAW BASIC UNK BB-A-106D

0004 6830-01-558-9852 1,036.000 CY $ ________________ $ ________________

PAGE 16 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 7 DAYS ADO

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be

PAGE 17 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 6830-01-558-9889 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0004 1000011747 0004 N/A N/A N/A N/A

SUPPLIES/SERVICES: 6830-01-558-9889

ARGON, FULL CYLINDER

SHIPPING NAME---ARGON, COMPRESSED

HAZARD CLASS/DIVISION---2.2, I.D. NO. UN1006

LABEL REQUIRED---NONFLAMMABLE GAS

UNIT QTY EQUALS 251 CU FT PER CYLINDER.

GFP--CYLINDER NSN 8120-00-282-8077

TECH DATA AVAILABILITY:

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY/FEDERAL

SPECIFICATIONS/STANDARDS AND/OR VOLUNTARY

INDUSTRY) STANDARDS. REFER TO SECTION L, CLAUSE

52.211-9G13 FOR OBTAINING SUCH DATA.

MSDS AND OSHA HAZARD WARNING LABEL ARE

REQUIRED.THE MSDS AND HAZARD WARNING

LABEL MUST BE REVIEWED AND APPROVED BY

TECHNICAL PERSONNEL BEFORE CONTRACT

AWARD. THE APPROVED MSDS AND LABEL MUST

THEN BE PLACED ON THE CONTRACT FILE AND

A COPY FORWARDED TO THE DSCR HMIRS OFFICE

(DSCR-VBA).

SAMPLING:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

TYPE II SHELF LIFE REQUIREMENTS

PACKAGING IAW D.O.T. REQUIRMENTS FOR

CON/DOMESTIC SHIPMENTS. EXPORT

SHIPMENTS SHALL BE PACKAGED IAW

U.N. REQUIREMENTS.

PAGE 18 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

BELOW, THE SUPPLIES SHALL COMPLY WITH APPLICABLE

PACKAGING REQUIREMENTS OF THE LATEST EDITION OF

THE INTERNATIONAL CIVIL AVIATION ORGANIZATION

(ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE

TRANSPORT OF DANGEROUS GOODS BY AIR, THE

INTERNATIONAL MARITIME DANGEROUS GOODS CODE

(IMDG CODE), TITLE FORTY-NINE OF THE CODE OF

FEDERAL REGULATIONS (49 CFR), AND AIR FORCE

JOINT MANUAL (AFJMAN) 24-204, PREPARING

HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENTS.

TO THE EXTENT THAT THERE IS CONFLICT BETWEEN THE

REQUIREMENTS OF THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA LISTED BELOW AND THE

REQUIREMENTS OF ICAO AND IMDG, THE PROVISIONS IN

ICAO AND IMDG WILL CONTROL OVER THE CONFLICTING

PROVISIONS IN THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA.

UNLESS OTHERWISE SPECIFIED BY THE PROCURING

ACTIVITY, INTERIOR AND EXTERIOR CONTAINERS OF

HAZARDOUS MATERIAL SHALL BE PROPERLY CLASSIFIED,

DOCUMENTED, CERTIFIED, DESCRIBED, PACKAGED,

MARKED, AND LABELED IN ACCORDANCE WITH ICAO,

IMDG, 49 CFR, AFJMAN 24-204, AND MIL-STD-129.

BECAUSE THE ICAO AND IMDG PUBLICATIONS ARE NOT

PUBLISHED BY THE U.S. GOVERNMENT PRINTING

OFFICE, A LIST OF SOURCES, INCLUDING PRIVATE

COMPANIES, WHERE THE PUBLICATIONS MAY BE

OBTAINED IS ALSO PROVIDED. THE COMPANIES CITED

BELOW ARE PROVIDED FOR YOUR INFORMATION AND

MENTION OF THESE COMPANIES DOES NOT INDICATE

ENDORSEMENT BY THE DEFENSE GENERAL SUPPLY

CENTER. THIS LIST IS NOT INCLUSIVE OF ALL

COMPANIES WHICH MAY BE ABLE TO PROVIDE

THESE REQUIRED PUBLICATIONS.

LABELMASTER

5724 N. PULASKI ROAD

CHICAGO, IL 60646

1-800-621-5808

UNITED NATIONS PUB.

ROOM DC 2-853

NEW YORK, NY 10017

212-963-8302

UNZ AND COMPANY

190 BALDWIN AVE

JERSEY CITY, NJ 07306

PAGE 19 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

1-800-631-3098.

UNIPUB

4611-F ASSEMBLY DRIVE

LANHAM, MD 20706

301-459-7666

NEW YORK NAUTICAL INSTRUMENT AND SERVICE

140 W. BROADWAY

NEW YORK, NY 10013

212-962-4522

ALL PERFORMANCE TEST REQUIREMENTS SHALL BE

SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING

TO THE DATE AND DATA RESULTS OBTAINED FROM

PERFORMANCE ORIENTED PACKAGING TESTING. THE

CONTRACTOR AS THE CERTIFIER SHALL BE RESPONSIBLE

FOR PROVIDING TESTING SERVICES. CONTRACTORS

WHICH DO NOT SELF CERTIFY SHALL BE RESPONSIBLE

FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING

PERFORMANCE TESTING SERVICES ARE IN FACT

REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION

(DOT). PERFORMANCE ORIENTED PACKAGING IS

APPLICABLE TO ALL CLASSES OF HAZARDOUS MATERIALS

EXCLUDING RADIOACTIVE MATERIAL, CYLINDERS AND

OTHER RECEPTACLES FOR COMPRESSED GASES,

PACKAGING WITH A NET MASS EXCEEDING 882 POUNDS

AND PACKAGES WITH A CAPACITY EXCEEDING 118.8

GALLONS. ALL CERTIFICATES AND REPORTS SHALL BE

AVAILABLE FOR INSPECTION BY AN AUTHORIZED

GOVERNMENT REPRESENTATIVE FOR A PERIOD OF NOT

LESS THAN 3 YEARS.

IAW BASIC SPEC NR MIL-A-18455C NOT 1

REVISION NR C DTD 10/03/2006

PART PIECE NUMBER: TYPE I

0005 6830-01-558-9889 116.000 CY $ ________________ $ ________________

ARGON,TECHNICAL

ACCEPTANCE POINT: ORIGIN

PAGE 20 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be

ITEM PR PRLI PR PRLI Material Need Ship Date .

0005 1000011747 0005 N/A N/A N/A N/A

SUPPLIES/SERVICES: 6830-01-558-9904

SHIPPING NAME: ARGON, COMPRESSED

PAGE 21 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 6830-01-558-9904 CONT'D

HAZARD CLASS/DIVISION: 2.2, I.D. NO. UN1006

LABEL REQUIRED: NONFLAMMABLE GAS

UNIT CYLINDER CONTAINS 381 CU FT.

GFM: CYLINDER NSN 8120-01-431-1177

TECH DATA AVAILABILITY:

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY/FEDERAL

SPECIFICATIONS/STANDARDS AND/OR VOLUNTARY

LABEL MUST BE REVIEWED AND APPROVED BY

TECHNICAL PERSONNEL BEFORE CONTRACT

AWARD. THE APPROVED MSDS AND LABEL MUST

THEN BE PLACED ON THE CONTRACT FILE AND

A COPY FORWARDED TO THE DSCR HMIRS OFFICE

(DSCR-VBA).

SAMPLING:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE

FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

OCONUS CENTCOM NSN

PACKAGE IAW D.O.T FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE

PACKAGED IAW U.N. INTERNATIONAL REQUIREMENTS AND MARKED IAW MIL-STD 129

MARKING REQUIREMENTS.

BELOW, THE SUPPLIES SHALL COMPLY WITH APPLICABLE

PACKAGING REQUIREMENTS OF THE LATEST EDITION OF

THE INTERNATIONAL CIVIL AVIATION ORGANIZATION

(ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE

TRANSPORT OF DANGEROUS GOODS BY AIR, THE

INTERNATIONAL MARITIME DANGEROUS GOODS CODE

(IMDG CODE), TITLE FORTY-NINE OF THE CODE OF

FEDERAL REGULATIONS (49 CFR), AND AIR FORCE

JOINT MANUAL (AFJMAN) 24-204, PREPARING

HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENTS.

TO THE EXTENT THAT THERE IS CONFLICT BETWEEN THE

REQUIREMENTS OF THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA LISTED BELOW AND THE

REQUIREMENTS OF ICAO AND IMDG, THE PROVISIONS IN

PAGE 22 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

ICAO AND IMDG WILL CONTROL OVER THE CONFLICTING

PROVISIONS IN THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA.

UNLESS OTHERWISE SPECIFIED BY THE PROCURING

ACTIVITY, INTERIOR AND EXTERIOR CONTAINERS OF

HAZARDOUS MATERIAL SHALL BE PROPERLY CLASSIFIED,

DOCUMENTED, CERTIFIED, DESCRIBED, PACKAGED,

MARKED, AND LABELED IN ACCORDANCE WITH ICAO,

IMDG, 49 CFR, AFJMAN 24-204, AND MIL-STD-129.

BECAUSE THE ICAO AND IMDG PUBLICATIONS ARE NOT

PUBLISHED BY THE U.S. GOVERNMENT PRINTING

OFFICE, A LIST OF SOURCES, INCLUDING PRIVATE

COMPANIES, WHERE THE PUBLICATIONS MAY BE

OBTAINED IS ALSO PROVIDED. THE COMPANIES CITED

BELOW ARE PROVIDED FOR YOUR INFORMATION AND

MENTION OF THESE COMPANIES DOES NOT INDICATE

ENDORSEMENT BY THE DEFENSE GENERAL SUPPLY

CENTER. THIS LIST IS NOT INCLUSIVE OF ALL

COMPANIES WHICH MAY BE ABLE TO PROVIDE

THESE REQUIRED PUBLICATIONS.

LABELMASTER

5724 N. PULASKI ROAD

CHICAGO, IL 60646

1-800-621-5808

UNITED NATIONS PUB.

ROOM DC 2-853

NEW YORK, NY 10017

212-963-8302

UNZ AND COMPANY

190 BALDWIN AVE

JERSEY CITY, NJ 07306

1-800-631-3098.

UNIPUB

4611-F ASSEMBLY DRIVE

LANHAM, MD 20706

301-459-7666

NEW YORK NAUTICAL INSTRUMENT AND SERVICE

140 W. BROADWAY

NEW YORK, NY 10013

212-962-4522

ALL PERFORMANCE TEST REQUIREMENTS SHALL BE

SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING

TO THE DATE AND DATA RESULTS OBTAINED FROM

PERFORMANCE ORIENTED PACKAGING TESTING. THE

CONTRACTOR AS THE CERTIFIER SHALL BE RESPONSIBLE

FOR PROVIDING TESTING SERVICES. CONTRACTORS

PAGE 23 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

WHICH DO NOT SELF CERTIFY SHALL BE RESPONSIBLE

FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING

PERFORMANCE TESTING SERVICES ARE IN FACT

REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION

(DOT). PERFORMANCE ORIENTED PACKAGING IS

APPLICABLE TO ALL CLASSES OF HAZARDOUS MATERIALS

EXCLUDING RADIOACTIVE MATERIAL, CYLINDERS AND

OTHER RECEPTACLES FOR COMPRESSED GASES,

PACKAGING WITH A NET MASS EXCEEDING 882 POUNDS

AND PACKAGES WITH A CAPACITY EXCEEDING 118.8

GALLONS. ALL CERTIFICATES AND REPORTS SHALL BE

AVAILABLE FOR INSPECTION BY AN AUTHORIZED

GOVERNMENT REPRESENTATIVE FOR A PERIOD OF NOT

LESS THAN 3 YEARS.

IAW BASIC SPEC NR MIL-A-18455C NOT 1

0006 6830-01-558-9904 18.000 CY $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 7 DAYS ADO

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be

PAGE 24 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be

ITEM PR PRLI PR PRLI Material Need Ship Date .

0006 1000011747 0006 N/A N/A N/A N/A

SUPPLIES/SERVICES: 6830-01-558-9916

SHIPPING NAME: ARGON, COMPRESSED

HAZARD CLASS/DIVISION: 2.2, I.D. NO. UN1006

LABEL REQUIRED: NONFLAMMABLE GAS

UNIT CYLINDER CONTAINS 578 CU FT.

GFM: CYLINDER NSN 8120-01-360-1873

TECH DATA AVAILABILITY:

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY/FEDERAL

SPECIFICATIONS/STANDARDS AND/OR VOLUNTARY

LABEL MUST BE REVIEWED AND APPROVED BY

TECHNICAL PERSONNEL BEFORE CONTRACT

AWARD. THE APPROVED MSDS AND LABEL MUST

PAGE 25 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 6830-01-558-9916 CONT'D

THEN BE PLACED ON THE CONTRACT FILE AND

A COPY FORWARDED TO THE DSCR HMIRS OFFICE

(DSCR-VBA).

SAMPLING:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE

FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

OCONUS CENTCOM NSN

DOMESTIC SHIPMENTS SHALL BE PACKAGED IAW D.O.T. REQUIREMENTS. EXPORT

SHIPMENTS SHALL BE PACKAGED IAW U.N. INTERNATIONAL REQUIREMENTS AND

MARKED IAW MIL-STD 129 MARKING REQUIREMENTS.

IN ADDITION TO THE PACKAGING REQUIREMENTS

INCLUDED IN THE COMMODITY SPECIFICATION LISTED

BELOW, THE SUPPLIES SHALL COMPLY WITH APPLICABLE

PACKAGING REQUIREMENTS OF THE LATEST EDITION OF

THE INTERNATIONAL CIVIL AVIATION ORGANIZATION

(ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE

TRANSPORT OF DANGEROUS GOODS BY AIR, THE

INTERNATIONAL MARITIME DANGEROUS GOODS CODE

(IMDG CODE), TITLE FORTY-NINE OF THE CODE OF

FEDERAL REGULATIONS (49 CFR), AND AIR FORCE

JOINT MANUAL (AFJMAN) 24-204, PREPARING

HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENTS.

TO THE EXTENT THAT THERE IS CONFLICT BETWEEN THE

REQUIREMENTS OF THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA LISTED BELOW AND THE

REQUIREMENTS OF ICAO AND IMDG, THE PROVISIONS IN

ICAO AND IMDG WILL CONTROL OVER THE CONFLICTING

PROVISIONS IN THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA.

UNLESS OTHERWISE SPECIFIED BY THE PROCURING

ACTIVITY, INTERIOR AND EXTERIOR CONTAINERS OF

HAZARDOUS MATERIAL SHALL BE PROPERLY CLASSIFIED,

DOCUMENTED, CERTIFIED, DESCRIBED, PACKAGED,

MARKED, AND LABELED IN ACCORDANCE WITH ICAO,

IMDG, 49 CFR, AFJMAN 24-204, AND MIL-STD-129.

BECAUSE THE ICAO AND IMDG PUBLICATIONS ARE NOT

PUBLISHED BY THE U.S. GOVERNMENT PRINTING

OFFICE, A LIST OF SOURCES, INCLUDING PRIVATE

COMPANIES, WHERE THE PUBLICATIONS MAY BE

OBTAINED IS ALSO PROVIDED. THE COMPANIES CITED

BELOW ARE PROVIDED FOR YOUR INFORMATION AND

MENTION OF THESE COMPANIES DOES NOT INDICATE

ENDORSEMENT BY THE DEFENSE GENERAL SUPPLY

CENTER. THIS LIST IS NOT INCLUSIVE OF ALL

PAGE 26 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

COMPANIES WHICH MAY BE ABLE TO PROVIDE

THESE REQUIRED PUBLICATIONS.

LABELMASTER

5724 N. PULASKI ROAD

CHICAGO, IL 60646

1-800-621-5808

UNITED NATIONS PUB.

ROOM DC 2-853

NEW YORK, NY 10017

212-963-8302

UNZ AND COMPANY

190 BALDWIN AVE

JERSEY CITY, NJ 07306

1-800-631-3098.

UNIPUB

4611-F ASSEMBLY DRIVE

LANHAM, MD 20706

301-459-7666

NEW YORK NAUTICAL INSTRUMENT AND SERVICE

140 W. BROADWAY

NEW YORK, NY 10013

212-962-4522

ALL PERFORMANCE TEST REQUIREMENTS SHALL BE

SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING

TO THE DATE AND DATA RESULTS OBTAINED FROM

PERFORMANCE ORIENTED PACKAGING TESTING. THE

CONTRACTOR AS THE CERTIFIER SHALL BE RESPONSIBLE

FOR PROVIDING TESTING SERVICES. CONTRACTORS

WHICH DO NOT SELF CERTIFY SHALL BE RESPONSIBLE

FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING

PERFORMANCE TESTING SERVICES ARE IN FACT

REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION

(DOT). PERFORMANCE ORIENTED PACKAGING IS

APPLICABLE TO ALL CLASSES OF HAZARDOUS MATERIALS

EXCLUDING RADIOACTIVE MATERIAL, CYLINDERS AND

OTHER RECEPTACLES FOR COMPRESSED GASES,

PACKAGING WITH A NET MASS EXCEEDING 882 POUNDS

AND PACKAGES WITH A CAPACITY EXCEEDING 118.8

GALLONS. ALL CERTIFICATES AND REPORTS SHALL BE

AVAILABLE FOR INSPECTION BY AN AUTHORIZED

IAW BASIC SPEC NR MIL-A-18455C NOT 1

PAGE 27 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

0007 6830-01-558-9916 1.000 CY $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 7 DAYS ADO

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be

PAGE 28 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

ITEM PR PRLI PR PRLI Material Need Ship Date .

0007 1000011747 0007 N/A N/A N/A N/A

SUPPLIES/SERVICES: 6830-01-558-9932

SHIPPING NAME: ARGON, COMPRESSED

HAZARD CLASS/DIVISION: 2.2, I.D. NO. UN1006

LABEL REQUIRED: NONFLAMMABLE GAS

UNIT CYLINDER CONTAINS 251 CU FT.

GFM: CYLINDER NSN 8120-00-282-8077

TECH DATA AVAILABILITY:

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY/FEDERAL

SPECIFICATIONS/STANDARDS AND/OR VOLUNTARY

INDUSTRY) STANDARDS. REFER TO SECTION L, CLAUSE

52.211-9G13 FOR OBTAINING SUCH DATA.

TABLE

MSDS AND OSHA HAZARD WARNING LABEL ARE

REQUIRED.THE MSDS AND HAZARD WARNING

LABEL MUST BE REVIEWED AND APPROVED BY

TECHNICAL PERSONNEL BEFORE CONTRACT

AWARD. THE APPROVED MSDS AND LABEL MUST

THEN BE PLACED ON THE CONTRACT FILE AND

A COPY FORWARDED TO THE DSCR HMIRS OFFICE

(DSCR-VBA).

SAMPLING

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

DOMESTIC SHIPMENTS SHALL BE PACKAGED IAW D.O.T. REQUIREMENTS. EXPORT

PAGE 29 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 6830-01-558-9932 CONT'D

SHIPMENTS SHALL BE PACKAGED IAW U.N. INTERNATIONAL REQUIREMENTS AND

MARKED IAW MIL-STD 129 MARKING REQUIREMENTS.

BELOW, THE SUPPLIES SHALL COMPLY WITH APPLICABLE

PACKAGING REQUIREMENTS OF THE LATEST EDITION OF

THE INTERNATIONAL CIVIL AVIATION ORGANIZATION

(ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE

TRANSPORT OF DANGEROUS GOODS BY AIR, THE

INTERNATIONAL MARITIME DANGEROUS GOODS CODE

(IMDG CODE), TITLE FORTY-NINE OF THE CODE OF

FEDERAL REGULATIONS (49 CFR), AND AIR FORCE

JOINT MANUAL (AFJMAN) 24-204, PREPARING

HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENTS.

TO THE EXTENT THAT THERE IS CONFLICT BETWEEN THE

REQUIREMENTS OF THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA LISTED BELOW AND THE

REQUIREMENTS OF ICAO AND IMDG, THE PROVISIONS IN

ICAO AND IMDG WILL CONTROL OVER THE CONFLICTING

PROVISIONS IN THE COMMODITY SPECIFICATION AND

OTHER PACKAGING DATA.

UNLESS OTHERWISE SPECIFIED BY THE PROCURING

ACTIVITY, INTERIOR AND EXTERIOR CONTAINERS OF

HAZARDOUS MATERIAL SHALL BE PROPERLY CLASSIFIED,

DOCUMENTED, CERTIFIED, DESCRIBED, PACKAGED,

MARKED, AND LABELED IN ACCORDANCE WITH ICAO,

IMDG, 49 CFR, AFJMAN 24-204, AND MIL-STD-129.

BECAUSE THE ICAO AND IMDG PUBLICATIONS ARE NOT

PUBLISHED BY THE U.S. GOVERNMENT PRINTING

OFFICE, A LIST OF SOURCES, INCLUDING PRIVATE

COMPANIES, WHERE THE PUBLICATIONS MAY BE

OBTAINED IS ALSO PROVIDED. THE COMPANIES CITED

BELOW ARE PROVIDED FOR YOUR INFORMATION AND

MENTION OF THESE COMPANIES DOES NOT INDICATE

ENDORSEMENT BY THE DEFENSE GENERAL SUPPLY

CENTER. THIS LIST IS NOT INCLUSIVE OF ALL

COMPANIES WHICH MAY BE ABLE TO PROVIDE

THESE REQUIRED PUBLICATIONS.

LABELMASTER

5724 N. PULASKI ROAD

CHICAGO, IL 60646

1-800-621-5808

UNITED NATIONS PUB.

ROOM DC 2-853

NEW YORK, NY 10017

212-963-8302

PAGE 30 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

UNZ AND COMPANY

190 BALDWIN AVE

JERSEY CITY, NJ 07306

1-800-631-3098.

UNIPUB

4611-F ASSEMBLY DRIVE

LANHAM, MD 20706

301-459-7666

NEW YORK NAUTICAL INSTRUMENT AND SERVICE

140 W. BROADWAY

NEW YORK, NY 10013

212-962-4522

ALL PERFORMANCE TEST REQUIREMENTS SHALL BE

SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING

TO THE DATE AND DATA RESULTS OBTAINED FROM

PERFORMANCE ORIENTED PACKAGING TESTING. THE

CONTRACTOR AS THE CERTIFIER SHALL BE RESPONSIBLE

FOR PROVIDING TESTING SERVICES. CONTRACTORS

WHICH DO NOT SELF CERTIFY SHALL BE RESPONSIBLE

FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING

PERFORMANCE TESTING SERVICES ARE IN FACT

REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION

(DOT). PERFORMANCE ORIENTED PACKAGING IS

APPLICABLE TO ALL CLASSES OF HAZARDOUS MATERIALS

EXCLUDING RADIOACTIVE MATERIAL, CYLINDERS AND

OTHER RECEPTACLES FOR COMPRESSED GASES,

PACKAGING WITH A NET MASS EXCEEDING 882 POUNDS

AND PACKAGES WITH A CAPACITY EXCEEDING 118.8

GALLONS. ALL CERTIFICATES AND REPORTS SHALL BE

AVAILABLE FOR INSPECTION BY AN AUTHORIZED

GOVERNMENT REPRESENTATIVE FOR A PERIOD OF NOT

LESS THAN 3 YEARS.

IAW BASIC NON GOVT STD AWSA5.32M

REVISION NR DTD 08/11/2011

PART PIECE NUMBER: AWS A5.32-SG-A

0008 6830-01-558-9932 99.000 CY $ ________________ $ ________________

PAGE 31 OF 396 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 7 DAYS ADO

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C).