PID_PACK-0002.docx

DOCX document 318 KB Posted

Attached to
C-5 Galaxy Seals-Amendment #3- Extension- Closing Date March 5, 2021 Federal contract opportunity
Solicitation number
SPE4A221R0001
Issued by
Defense Logistics Agency Aviation

View the file

Other files for this federal contract opportunity

Other files attached to C-5 Galaxy Seals-Amendment #3- Extension- Closing Date March 5, 2021, newest first.
File Type Posted
SQS_Seals_2020_09_01.pdf PDF
RFP-SPE4A221R0001.pdf PDF
SF30_SPE4A221R00010003.pdf PDF
SPE4A221R0001-0002.pdf PDF
Price_and_Delivery-SPE4A221R0001-0002.xlsx XLSX spreadsheet
PID_PACK-0001.docx DOCX document
Price_and_Delivery-SPE4A221R0001-0001.xlsx XLSX spreadsheet
SPE4A221R0001-0001.pdf PDF
Price_and_Delivery.xlsx XLSX spreadsheet
PID_PACK_TXT.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

*** Product Number: 000071745 ** PID Text

SEAL ASSEMBLY,SLAT,TRAILING EDGE

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

The following companies are approved sources of supply based on SQS 23

JULY 2018:

98897,17772,34336,88308,98247,0H0W4,26164,2V078,91750,0V8N2,31645,75345

50744,3DBN7,09036,32YE0,379J3,4R2Y5,6K404,7Z016,9U679,1WL60,6Z800,24664

6K915,4R096,07096,4HUG4,0NFB8,0Y6E8,0ZBE8,023T7,1CZP2,1DA92,1FUD6,1HC54

1JYT1,1WKW6,1X015,1XLG2,2N335,7B953,7L636,25025,3B8L1,3P104,34CZ9,373M2

34FP9,4V463,5M696,5VX80,51705,553X3,563J1,59213,6BBE5,0RVE1,81833,32847

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

UNLESS OTHERWISE NOTED

FIRST ARTICLE TESTING IS REQUIRED

FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS

THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE

CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY,

WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE

II, CLASS C, STYLE 1.

THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN

MILITARY SALES (FMS) AND STOCK SHIPMENTS.

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

CRITICAL APPLICATION ITEM

COLIC TOOL AND ENGINEERING INC DBA 373M2 P/N 4J12283-718B

Triman Industries, Inc. 0ZBE8 P/N 4J12283-718B

MIKRON PMP LLC 379J3 P/N 4J12283-718B

TRANSDIGM, INC. DBA Aerocontrolex 81833 P/N 4J12283-718B

INSULATION SOURCES, INC. DBA ICO 51705 P/N 4J12283-718B

BURKE INDUSTRIES PUROSIL DIV. 07096 P/N 4J12283-718B

Lockheed Martin Logistic Services 1FUD6 P/N 4J12283-718B Sonfarrel Inc. 09036 P/N 4J12283-718B

BOMBARDIER INC CANADAIR 88308 P/N 4J12283-718B

Goodrich Corporation DBA Goodrich 31645 P/N 4J12283-718B Janel's Industries, Inc. 3B8L1 P/N 4J12283-718B

UFC AEROSPACE CORP. 5M696 P/N 4J12283-718B

LOBO VENTURES, LTD. DBA PRECISION 1HC54 P/N 4J12283-718B

Aero Engineering & Manufacturing 17772 P/N 4J12283-718B Pattonair USA, Inc. 2N335 P/N 4J12283-718B Handy Tool & Mfg. Co., Inc., The 91750 P/N 4J12283-718B Williams Aerospace & Manufacturing 3P104 P/N 4J12283-718B SPARES DBA Special Parts And 0V8N2 P/N 4J12283-718B Tect Hypervelocity, Inc. 34336 P/N 4J12283-718B

TOP NOTCH SEALS GASKETS CORP DBA 553X3 P/N 4J12283-718B

RAILRHODES INC 2V078 P/N 4J12283-718B

Lockheed Martin Corporation DBA 563J1 P/N 4J12283-718B

REFA INTERNATIONAL INC. DBA 023T7 P/N 4J12283-718B

United Seal & Rubber Company, Inc. 4R096 P/N 4J12283-718B

A WILEY ASSOCIATES 4R2Y5 P/N 4J12283-718B

DIALOGIC CORP. DBA DIALOGIC 0NFB8 P/N 4J12283-718B

Kirkhill Inc. DBA Haskon, Div of 3DBN7 P/N 4J12283-718B

BLADE INDUSTRIAL PRODUCTS INC. 1JYT1 P/N 4J12283-718B

GME MFG., INC. 1WKW6 P/N 4J12283-718B

LOCKHEED MARTIN SERVICES, LLC 1WL60 P/N 4J12283-718B

Aero Components, LLC 59213 P/N 4J12283-718B

NESTOR SALES LLC DBA AIM SUPPLY CO 1X015 P/N 4J12283-718B

TGC ENTERPRISES, INC. DBA ADVANCED 1CZP2 P/N 4J12283-718B

CHIEF AEROSPACE LLC DBA 5VX80 P/N 4J12283-718B

Canadian Commercial Corporation 98247 P/N 4J12283-718B Jonal Laboratories Incorporated 24664 P/N 4J12283-718B

LOCKHEED MARTIN CORPORATION DBA 98897 P/N 4J12283-718B

UNITED EQUIPMENT, INC. 25025 P/N 4J12283-718B

AEROSPACE ENGINEERING & SUPPORT, 1DA92 P/N 4J12283-718B

Kirkhill Inc. DBA 75345 P/N 4J12283-718B TNL Sales LLC DBA 1XLG2 P/N 4J12283-718B

PACIFIC AEROSTRUCTURES SERVICES 32YE0 P/N 4J12283-718B

GENERAL FORMING CORPORATION 26164 P/N 4J12283-718B

METALMART INTERNATIONAL, INC. DBA 4V463 P/N 4J12283-718B

TRP CONSTRUCTION INC DBA 0H0W4 P/N 4J12283-718B

HAN-BOONE INTERNATIONAL, INC. DBA 0Y6E8 P/N 4J12283-718B

Thaker Consulting & Mfg. Co. Corp. 34CZ9 P/N 4J12283-718B Charleston Aluminum, LLC 34FP9 P/N 4J12283-718B

AERO-FAB SALES 4HUG4 P/N 4J12283-718B

BASIC RUBBER AND PLASTICS CO. 6K404 P/N 4J12283-718B

JEDTCO CORP. 6K915 P/N 4J12283-718B

A AND M AEROSPACE, INC. 6Z800 P/N 4J12283-718B

MC KEOWN, ROBERT CO INC 7B953 P/N 4J12283-718B

METALMART INTERNATIONAL, INC. DBA 7L636 P/N 4J12283-718B

CPI AEROSTRUCTURES, INC. DBA CPI 9U679 P/N 4J12283-718B

KAMPI COMPONENTS CO., INC. 7Z016 P/N 4J12283-718B

SPHERE ALLIANCE INC DBA ADVANCED 6BBE5 P/N 4J12283-718B

YAMA MFG CO INCORPORATED 0RVE1 P/N 4J12283-718B

Kirkhill Inc. DBA 50744 P/N 4J12283-718B

IAW REFERENCE DRAWING NR 98897 4J12283

REVISION NR J DTD 07/11/2014

PART PIECE NUMBER: P/N 4J12283-718B

IAW REFERENCE DRAWING NR 98897 4R23100

REVISION NR A DTD 05/05/1966

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-408

REVISION NR M DTD 06/15/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS30002

REVISION NR T DTD 10/16/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS30004

REVISION NR D DTD 02/15/1979

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23108

REVISION NR DTD 12/14/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-402

REVISION NR G DTD 10/15/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS5025

REVISION NR AV DTD 11/05/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP60-505

REVISION NR U DTD 12/20/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R20000

REVISION NR C DTD 09/18/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP63-001

REVISION NR T DTD 11/13/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-302

REVISION NR AE DTD 05/17/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS30000

REVISION NR T DTD 10/19/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR D DTD 05/31/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP54-101

REVISION NR AB DTD 09/01/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23108

REVISION NR DTD 12/14/1967

PART PIECE NUMBER:

*** Product Number: 000071746 ** PID Text

SEAL ASSEMBLY,SLAT

export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

RD002, COVERED DEFENSE INFORMATION APPLIES

The following companies are approved sources of supply based on SQS

23JUL2018:

98897,17772,34336,88308,98247,0H0W4,26164,2V078,91750,0V8N2,31645,75345

50744,3DBN7,09036,32YE0,379J3,4R2Y5,6K404,7Z016,9U679,1WL60,6Z800,24664

6K915,4R096,07096,4HUG4,0NFB8,0Y6E8,0ZBE8,023T7,1CZP2,1DA92,1FUD6,1HC54

1JYT1,1WKW6,1X015,1XLG2,2N335,7B953,7L636,25025,3B8L1,3P104,34CZ9,373M2

34FP9,4V463,5M696,5VX80,51705,553X3,563J1,59213,6BBE5,0RVE1,81833,32847

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

Casting/forging may be required to manufacture this NSN. If a casting/forging is required, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

GOVERNMENT FIRST ARTICLE REQUIRED

Government First Article Preproduction approval required. Testing will be in accordance with applicable drawings, specifications and/or Engineering instructions. The first article offered shall be manufactured at the facilities in which production quantities are procured and produced under this contract. When submitting the first article(s) for government testing, a copy of the contract and all applicable drawings, specifications, engineering instructions, certifications, and inspection sheets shall be provided. Upon receipt and evaluation of the test report from the responsible government testing location, the contracting officer will provide final notification to the manufacturer. Any questions or concerns regarding the first article test requirements must be submitted through the contracting officer.

Additional Wide Area Workflow (WAWF) instructions for government first article test CLIN: The contractor shall code the receiving report for government first article test CLIN in WAWF as Follows:

A: Inspection at origin (Source) - Enter the DCMA office DODAAC listed on page 1 of the contract.

B: Acceptance by other - Enter the issue by office DODAAC listed on page 1 of the contract.

C: Ship to code - Enter the DODAAC of the test facility listed for the government first article test CLIN in the contract (See FAR Clause 52.209-4).

FIRST ARTICLE TEST MARKING INSTRUCTIONS:

FAT sample(s) packaging shall be clearly marked "FIRST ARTICLE TEST EXHIBIT(S) DO NOT POST TO STOCK!!!" in largest font possible with contrasting color to the packaging. Marking shall be located adjacent to the Package Shipping Label side and on at least one additional side of the package.

SAMPLING:

MIL-STD-130N(1) DATED 16 NOV 2012.

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

CRITICAL APPLICATION ITEM

Triman Industries, Inc. 0ZBE8 P/N 4J12283-720B TRANSDIGM, INC. DBA Aerocontrolex 81833 P/N 4J12283-720B

INSULATION SOURCES, INC. DBA ICO 51705 P/N 4J12283-720B

Goodrich Corporation DBA Goodrich 31645 P/N 4J12283-720B

LOBO VENTURES, LTD. DBA PRECISION 1HC54 P/N 4J12283-720B

Handy Tool & Mfg. Co., Inc., The 91750 P/N 4J12283-720B Williams Aerospace & Manufacturing 3P104 P/N 4J12283-720B SPARES DBA Special Parts And 0V8N2 P/N 4J12283-720B United Seal & Rubber Company, Inc. 4R096 P/N 4J12283-720B

A WILEY ASSOCIATES 4R2Y5 P/N 4J12283-720B

DIALOGIC CORP. DBA DIALOGIC 0NFB8 P/N 4J12283-720B

Kirkhill Inc. DBA Haskon, Div of 3DBN7 P/N 4J12283-720B

BLADE INDUSTRIAL PRODUCTS INC. 1JYT1 P/N 4J12283-720B

GME MFG., INC. 1WKW6 P/N 4J12283-720B

Aero Components, LLC 59213 P/N 4J12283-720B

TGC ENTERPRISES, INC. DBA ADVANCED 1CZP2 P/N 4J12283-720B

LOCKHEED MARTIN CORPORATION DBA 98897 P/N 4J12283-720B

UNITED EQUIPMENT, INC. 25025 P/N 4J12283-720B

AEROSPACE ENGINEERING & SUPPORT, 1DA92 P/N 4J12283-720B

Kirkhill Inc. DBA 75345 P/N 4J12283-720B

GENERAL FORMING CORPORATION 26164 P/N 4J12283-720B

HAN-BOONE INTERNATIONAL, INC. DBA 0Y6E8 P/N 4J12283-720B

Thaker Consulting & Mfg. Co. Corp. 34CZ9 P/N 4J12283-720B

YAMA MFG CO INCORPORATED 0RVE1 P/N 4J12283-720B

AERO-FAB SALES 4HUG4 P/N 4J12283-720B

Kirkhill Inc. DBA 50744 P/N 4J12283-720B

BASIC RUBBER AND PLASTICS CO. 6K404 P/N 4J12283-720B

JEDTCO CORP. 6K915 P/N 4J12283-720B

A AND M AEROSPACE, INC. 6Z800 P/N 4J12283-720B

CPI AEROSTRUCTURES, INC. DBA CPI 9U679 P/N 4J12283-720B

SPHERE ALLIANCE INC DBA ADVANCED 6BBE5 P/N 4J12283-720B

IAW REFERENCE DRAWING NR 98897 STP54-101V20

REVISION NR Y DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4J12283

REVISION NR J DTD 07/11/2014

PART PIECE NUMBER: 4J12283-720B

IAW REFERENCE DRAWING NR 98897 STP59-204

REVISION NR B DTD 10/14/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23108

REVISION NR DTD 12/14/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-402

REVISION NR G DTD 01/30/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-402

REVISION NR G DTD 10/15/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP54-101UV28

REVISION NR Y DTD 09/20/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-001

REVISION NR L DTD 02/15/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP63-001V01J

REVISION NR T DTD 10/22/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS5025

REVISION NR AV DTD 11/05/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-001V03J

REVISION NR L DTD 08/14/1981

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP60-505

REVISION NR U DTD 12/20/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP63-001

REVISION NR T DTD 11/13/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-301

REVISION NR D DTD 10/16/1978

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 0581

REVISION NR G3 DTD 07/30/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1212

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1212.1

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1212.2

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1212.3

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1212.4

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1212.5

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1212.6

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1235

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1235.1

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1235.2

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1235.3

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1235.4

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1235.5

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-1.1235.6

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-3

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-4

REVISION NR A DTD 10/06/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-2.1000

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23100-2.1001

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-302

REVISION NR AE DTD 05/17/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR D DTD 05/31/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-208

REVISION NR AC DTD 03/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS30000

REVISION NR AA DTD 07/18/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP54-101

REVISION NR AB DTD 09/01/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS30000

REVISION NR AA DTD 06/04/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4R23108

REVISION NR DTD 12/14/1967

PART PIECE NUMBER:

*** Product Number: 000071748 ** PID Text

SEAL ASSEMBLY, SLAT

The following companies are approved sources of supply based on SQS

23JULY2018:

98897,17772,34336,88308,98247,0H0W4,26164,2V078,91750,0V8N2,31645,75345

50744,3DBN7,09036,32YE0,379J3,4R2Y5,6K404,7Z016,9U679,1WL60,6Z800,24664

6K915,4R096,07096,4HUG4,0NFB8,0Y6E8,0ZBE8,023T7,1CZP2,1DA92,1FUD6,1HC54

1JYT1,1WKW6,1X015,1XLG2,2N335,7B953,7L636,25025,3B8L1,3P104,34CZ9,373M2

34FP9,4V463,5M696,5VX80,51705,553X3,563J1,59213,6BBE5,0RVE1,81833,32847

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

INCLUDE ZDP01 OBJECT TEXT ID ST

Government First Article Preproduction approval required. Testing will be in accordance with applicable drawings, specifications and/or Engineering instructions. The first article offered shall be manufactured at the facilities in which production quantities are procured and produced under this contract. When submitting the first article(s) for government testing, a copy of the contract and all applicable drawings, specifications, engineering instructions, certifications, and inspection sheets shall be provided. Upon receipt and evaluation of the test report from the responsible government testing location, the contracting officer will provide final notification to the manufacturer. Any questions or concerns regarding the first article test requirements must be submitted through the contracting officer.

Additional Wide Area Workflow (WAWF) instructions for government first article test CLIN: The contractor shall code the receiving report for government first article test CLIN in WAWF as Follows:

A: Inspection at origin (Source) - Enter the DCMA office DODAAC listed on page 1 of the contract.

B: Acceptance by other - Enter the issue by office DODAAC listed on page 1 of the contract.

C: Ship to code - Enter the DODAAC of the test facility listed for the government first article test CLIN in the contract (See FAR Clause 52.209-4).

FIRST ARTICLE TEST MARKING INSTRUCTIONS:

FAT sample(s) packaging shall be clearly marked "FIRST ARTICLE TEST EXHIBIT(S) DO NOT POST TO STOCK!!!" in largest font possible with contrasting color to the packaging. Marking shall be located adjacent to the Package Shipping Label side and on at least one additional side of the package.

DATA IS PROPRIETARY OR INSUFFICIENT FOR

COMPETITIVE PROCUREMENT

THE ACCEPTABLE SOURCE(S) MUST MEET THE REQUIREMENTS

OF THE CURRENT REVISION OF THE OEM DRAWING

OFFERORS NOT CITED AS ACCEPTABLE SOURCES IN THE

PROCUREMENT ITEM DESCRIPTION ARE REQUIRED TO

OBTAIN SOURCE APPROVAL FROM THE DESIGN CONTROL

ACTIVITY. SOURCE APPROVAL REQUESTS/TECHNICAL

DATA PACKAGES MUST BE SUBMITTED TO DLA WITH

THE OFFER.

Triman Industries, Inc. 0ZBE8 P/N 4J12283-719B TRANSDIGM, INC. DBA Aerocontrolex 81833 P/N 4J12283-719B

INSULATION SOURCES, INC. DBA ICO 51705 P/N 4J12283-719B

Goodrich Corporation DBA Goodrich 31645 P/N 4J12283-719B

LOBO VENTURES, LTD. DBA PRECISION 1HC54 P/N 4J12283-719B

Aero Engineering & Manufacturing 17772 P/N 4J12283-719B Handy Tool & Mfg. Co., Inc., The 91750 P/N 4J12283-719B Williams Aerospace & Manufacturing 3P104 P/N 4J12283-719B SPARES DBA Special Parts And 0V8N2 P/N 4J12283-719B Tect Hypervelocity, Inc. 34336 P/N 4J12283-719B United Seal & Rubber Company, Inc. 4R096 P/N 4J12283-719B

A WILEY ASSOCIATES 4R2Y5 P/N 4J12283-719B

DIALOGIC CORP. DBA DIALOGIC 0NFB8 P/N 4J12283-719B

Kirkhill Inc. DBA Haskon, Div of 3DBN7 P/N 4J12283-719B

BLADE INDUSTRIAL PRODUCTS INC. 1JYT1 P/N 4J12283-719B

GME MFG., INC. 1WKW6 P/N 4J12283-719B

Aero Components, LLC 59213 P/N 4J12283-719B

TGC ENTERPRISES, INC. DBA ADVANCED 1CZP2 P/N 4J12283-719B

LOCKHEED MARTIN CORPORATION DBA 98897 P/N 4J12283-719B

UNITED EQUIPMENT, INC. 25025 P/N 4J12283-719B

AEROSPACE ENGINEERING & SUPPORT, 1DA92 P/N 4J12283-719B

Kirkhill Inc. DBA 75345 P/N 4J12283-719B

GENERAL FORMING CORPORATION 26164 P/N 4J12283-719B

HAN-BOONE INTERNATIONAL, INC. DBA 0Y6E8 P/N 4J12283-719B

Thaker Consulting & Mfg. Co. Corp. 34CZ9 P/N 4J12283-719B

YAMA MFG CO INCORPORATED 0RVE1 P/N 4J12283-719B

AERO-FAB SALES 4HUG4 P/N 4J12283-719B

BASIC RUBBER AND PLASTICS CO. 6K404 P/N 4J12283-719B

JEDTCO CORP. 6K915 P/N 4J12283-719B

A AND M AEROSPACE, INC. 6Z800 P/N 4J12283-719B

CPI AEROSTRUCTURES, INC. DBA CPI 9U679 P/N 4J12283-719B

SPHERE ALLIANCE INC DBA ADVANCED 6BBE5 P/N 4J12283-719B

*** Product Number: 000071751 ** PID Text

SEAL ASSEMBLY, SLAT, LEADING EDGE

export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

The following companies are approved sources of supply based on SQS

23JULY2018:

98897,17772,34336,88308,98247,0H0W4,26164,2V078,91750,0V8N2,31645,75345

50744,3DBN7,09036,32YE0,379J3,4R2Y5,6K404,7Z016,9U679,1WL60,6Z800,24664

6K915,4R096,07096,4HUG4,0NFB8,0Y6E8,0ZBE8,023T7,1CZP2,1DA92,1FUD6,1HC54

1JYT1,1WKW6,1X015,1XLG2,2N335,7B953,7L636,25025,3B8L1,3P104,34CZ9,373M2

34FP9,4V463,5M696,5VX80,51705,553X3,563J1,59213,6BBE5,0RVE1,81833,32847

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

LOCKHEED CORP (98897)

MARIETTA GA

P/N 4J12282-720B

ACCEPTABLE SOURCES

CANADIAN COMMERCIAL CORP (98247)

OTTAWA CANADA

BOMBARDIER INC. CANADAIR (88308)

DORVAL PQ CANADA

L & S MACHINE CO (34336)

WICHITA KS

COLLINS TECHNICAL RESEARCH INC (0H0W5)

SAN ANTONIO TX

AERO ENGINEERING & MFG (17772)

VALENCIA CA

IDENTIFY TO

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

CRITICAL ITEM - SOURCE INSPECTION REQUIRED.

THE ACCEPTABLE SOURCE(S) MUST MEET THE REQUIREMENTS

OF THE CURRENT REVISION OF THE OEM DRAWING

OFFERORS NOT CITED AS ACCEPTABLE SOURCES IN THE

PROCUREMENT ITEM DESCRIPTION ARE REQUIRED TO

OBTAIN SOURCE APPROVAL FROM THE DESIGN CONTROL

ACTIVITY. SOURCE APPROVAL REQUESTS/TECHNICAL

Triman Industries, Inc. 0ZBE8 P/N 4J12282-720B TRANSDIGM, INC. DBA Aerocontrolex 81833 P/N 4J12282-720B

INSULATION SOURCES, INC. DBA ICO 51705 P/N 4J12282-720B

Goodrich Corporation DBA Goodrich 31645 P/N 4J12282-720B

LOBO VENTURES, LTD. DBA PRECISION 1HC54 P/N 4J12282-720B

Aero Engineering & Manufacturing 17772 P/N 4J12282-720B Handy Tool & Mfg. Co., Inc., The 91750 P/N 4J12282-720B Williams Aerospace & Manufacturing 3P104 P/N 4J12282-720B SPARES DBA Special Parts And 0V8N2 P/N 4J12282-720B Tect Hypervelocity, Inc. 34336 P/N 4J12282-720B United Seal & Rubber Company, Inc. 4R096 P/N 4J12282-720B

A WILEY ASSOCIATES 4R2Y5 P/N 4J12282-720B

DIALOGIC CORP. DBA DIALOGIC 0NFB8 P/N 4J12282-720B

Kirkhill Inc. DBA Haskon, Div of 3DBN7 P/N 4J12282-720B

BLADE INDUSTRIAL PRODUCTS INC. 1JYT1 P/N 4J12282-720B

GME MFG., INC. 1WKW6 P/N 4J12282-720B

Aero Components, LLC 59213 P/N 4J12282-720B

TGC ENTERPRISES, INC. DBA ADVANCED 1CZP2 P/N 4J12282-720B

LOCKHEED MARTIN CORPORATION DBA 98897 P/N 4J12282-720B

UNITED EQUIPMENT, INC. 25025 P/N 4J12282-720B

AEROSPACE ENGINEERING & SUPPORT, 1DA92 P/N 4J12282-720B

Kirkhill Inc. DBA 75345 P/N 4J12282-720B

GENERAL FORMING CORPORATION 26164 P/N 4J12282-720B

HAN-BOONE INTERNATIONAL, INC. DBA 0Y6E8 P/N 4J12282-720B

Thaker Consulting & Mfg. Co. Corp. 34CZ9 P/N 4J12282-720B

YAMA MFG CO INCORPORATED 0RVE1 P/N 4J12282-720B

AERO-FAB SALES 4HUG4 P/N 4J12282-720B

BASIC RUBBER AND PLASTICS CO. 6K404 P/N 4J12282-720B

JEDTCO CORP. 6K915 P/N 4J12282-720B

A AND M AEROSPACE, INC. 6Z800 P/N 4J12282-720B

CPI AEROSTRUCTURES, INC. DBA CPI 9U679 P/N 4J12282-720B

SPHERE ALLIANCE INC DBA ADVANCED 6BBE5 P/N 4J12282-720B

IAW REFERENCE DRAWING NR 98897 4R23100

REVISION NR A DTD 05/05/1966

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP59-204

REVISION NR B DTD 10/14/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-402

REVISION NR G DTD 10/15/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-001

REVISION NR L DTD 02/15/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP63-001V01J

REVISION NR T DTD 10/22/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS5025

REVISION NR AV DTD 11/05/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-001V03J

REVISION NR L DTD 08/14/1981

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP60-505

REVISION NR U DTD 12/20/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4J12282

REVISION NR E DTD 06/21/1985

PART PIECE NUMBER: 4J12282-720B

IAW REFERENCE DRAWING NR 98897 DS30004

REVISION NR D DTD 02/15/1979

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP63-001

REVISION NR T DTD 11/13/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 0581

REVISION NR G3 DTD 07/30/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-302

REVISION NR AE DTD 05/17/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR D DTD 05/31/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-208

REVISION NR AC DTD 03/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS30000

REVISION NR AA DTD 07/18/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS30000

REVISION NR AA DTD 06/04/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4J12282

REVISION NR E DTD 05/06/2010

PART PIECE NUMBER:

*** Product Number: 000071753 ** PID Text

SEAL ASSY, SLAT

export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

The following companies are approved sources of supply based on SQS

31JULY2018:

98897,17772,34336,88308,98247,0H0W4,26164,2V078,91750,0V8N2,31645,75345

50744,3DBN7,09036,32YE0,379J3,4R2Y5,6K404,7Z016,9U679,1WL60,6Z800,24664

6K915,4R096,07096,4HUG4,0NFB8,0Y6E8,0ZBE8,023T7,1CZP2,1DA92,1FUD6,1HC54

1JYT1,1WKW6,1X015,1XLG2,2N335,7B953,7L636,25025,3B8L1,3P104,34CZ9,373M2

34FP9,4V463,5M696,5VX80,51705,553X3,563J1,59213,6BBE5,0RVE1,81833,32847

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

FOR GENERAL ENGINEERING DOCUMENT NOTES

SEE DOCUMENT 200415485.FINISH: PER B/P

SPARES CONFIGURATION: PER B/P, EXCEPT ADD

1/4IN OF TRIM TO ALL EDGES

DWG 4R23100 - C/O 4J12282

DWG 4R20000 - C/O 4R23100

DWG DS5025 - C/O 4J12282

DWG STP63-001 - C/O 4J12065

DWG DS30004 - CANCELLED USE STP51-302, C/O 4J12065

DWG STP51-302 - USE IN LIEU OF DS30004, C/O 4J12065

DWG STP60-505 - C/O 4J12065

DWG DS30002 - CANCELLED USE 0581, C/O 4J12065

DWG 0581 - USE IN LIEU OF DS30002

DWG DS30000 - FINISH AA,C,54 APPLY C/O 4J12282

DWG STP58-208 - FINISH AA, C/O DS30000

DWG STP58-001 - FINISH C, C/O DS30000

DWG STP59-204 - FINISH 54, C/O DS30000

DWG 200415485 - NOTES 1,3,6,10,12 APPLY.

UNLESS OTHERWISE NOTED

FIRST ARTICLE TESTING IS REQUIRED

CRITICAL ITEM - SOURCE INSPECTION REQUIRED.

CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY,

WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE

II, CLASS C, STYLE 1.

THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT

DLA DURING *OPEN SOLICITATION ONLY*.

TO RECEIVE A COPY OF THE DRAWING(S),

FOR EBS SOLICITATIONS USE URL

HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

CRITICAL APPLICATION ITEM

Triman Industries, Inc. 0ZBE8 P/N 4J12282-719B TRANSDIGM, INC. DBA Aerocontrolex 81833 P/N 4J12282-719B

INSULATION SOURCES, INC. DBA ICO 51705 P/N 4J12282-719B

BOMBARDIER INC CANADAIR 88308 P/N 4J12282-719B

Goodrich Corporation DBA Goodrich 31645 P/N 4J12282-719B

LOBO VENTURES, LTD. DBA PRECISION 1HC54 P/N 4J12282-719B

Aero Engineering & Manufacturing 17772 P/N 4J12282-719B Handy Tool & Mfg. Co., Inc., The 91750 P/N 4J12282-719B Williams Aerospace & Manufacturing 3P104 P/N 4J12282-719B SPARES DBA Special Parts And 0V8N2 P/N 4J12282-719B Tect Hypervelocity, Inc. 34336 P/N 4J12282-719B United Seal & Rubber Company, Inc. 4R096 P/N 4J12282-719B

A WILEY ASSOCIATES 4R2Y5 P/N 4J12282-719B

DIALOGIC CORP. DBA DIALOGIC 0NFB8 P/N 4J12282-719B

Kirkhill Inc. DBA Haskon, Div of 3DBN7 P/N 4J12282-719B

BLADE INDUSTRIAL PRODUCTS INC. 1JYT1 P/N 4J12282-719B

GME MFG., INC. 1WKW6 P/N 4J12282-719B

Aero Components, LLC 59213 P/N 4J12282-719B

TGC ENTERPRISES, INC. DBA ADVANCED 1CZP2 P/N 4J12282-719B

Canadian Commercial Corporation 98247 P/N 4J12282-719B

LOCKHEED MARTIN CORPORATION DBA 98897 P/N 4J12282-719B

UNITED EQUIPMENT, INC. 25025 P/N 4J12282-719B

AEROSPACE ENGINEERING & SUPPORT, 1DA92 P/N 4J12282-719B

Kirkhill Inc. DBA 75345 P/N 4J12282-719B

GENERAL FORMING CORPORATION 26164 P/N 4J12282-719B

HAN-BOONE INTERNATIONAL, INC. DBA 0Y6E8 P/N 4J12282-719B

Thaker Consulting & Mfg. Co. Corp. 34CZ9 P/N 4J12282-719B

YAMA MFG CO INCORPORATED 0RVE1 P/N 4J12282-719B

AERO-FAB SALES 4HUG4 P/N 4J12282-719B

BASIC RUBBER AND PLASTICS CO. 6K404 P/N 4J12282-719B

JEDTCO CORP. 6K915 P/N 4J12282-719B

A AND M AEROSPACE, INC. 6Z800 P/N 4J12282-719B

CPI AEROSTRUCTURES, INC. DBA CPI 9U679 P/N 4J12282-719B

SPHERE ALLIANCE INC DBA ADVANCED 6BBE5 P/N 4J12282-719B

IAW REFERENCE DRAWING NR 98897 4R23100

REVISION NR A DTD 05/05/1966

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP59-204

REVISION NR B DTD 10/14/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS30000

REVISION NR AA DTD 07/18/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-001

REVISION NR L DTD 02/15/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS5025

REVISION NR AV DTD 11/05/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP60-505

REVISION NR U DTD 12/20/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP63-001

REVISION NR T DTD 11/13/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4J12282

REVISION NR E DTD 06/21/1985

PART PIECE NUMBER: 4J12282-719B

IAW REFERENCE DRAWING NR 98897 4R20000

REVISION NR C DTD 02/04/1969

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 0581

REVISION NR G3 DTD 07/30/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-302

REVISION NR AE DTD 05/17/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR D DTD 05/31/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-208

REVISION NR AC DTD 03/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4J12282

REVISION NR E DTD 06/21/1985

PART PIECE NUMBER:

*** Product Number: 000071755 ** PID Text

SEAL ASSEMBLY, SLAT,,

export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

The following companies are approved sources of supply based on SQS

23JULY18:

98897,17772,34336,88308,98247,0H0W4,26164,2V078,91750,0V8N2,31645,75345

50744,3DBN7,09036,32YE0,379J3,4R2Y5,6K404,7Z016,9U679,1WL60,6Z800,24664

6K915,4R096,07096,4HUG4,0NFB8,0Y6E8,0ZBE8,023T7,1CZP2,1DA92,1FUD6,1HC54

1JYT1,1WKW6,1X015,1XLG2,2N335,7B953,7L636,25025,3B8L1,3P104,34CZ9,373M2

34FP9,4V463,5M696,5VX80,51705,553X3,563J1,59213,6BBE5,0RVE1,81833,32847

Contractor FAT requirement

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

THE ACCEPTABLE SOURCE(S) MUST MEET THE REQUIREMENTS

OF THE CURRENT REVISION OF THE OEM DRAWING

OFFERORS NOT CITED AS ACCEPTABLE SOURCES IN THE

PROCUREMENT ITEM DESCRIPTION ARE REQUIRED TO

OBTAIN SOURCE APPROVAL FROM THE DESIGN CONTROL

ACTIVITY. SOURCE APPROVAL REQUESTS/TECHNICAL

CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY,

WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE

II, CLASS C, STYLE 1.

DATA IS PROPRIETARY OR INSUFFICIENT FOR

COMPETITIVE PROCUREMENT

CRITICAL APPLICATION ITEM

COLIC TOOL AND ENGINEERING INC DBA 373M2 P/N 4J12282-718B

Triman Industries, Inc. 0ZBE8 P/N 4J12282-718B

MIKRON PMP LLC 379J3 P/N 4J12282-718B

TRANSDIGM, INC. DBA Aerocontrolex 81833 P/N 4J12282-718B

INSULATION SOURCES, INC. DBA ICO 51705 P/N 4J12282-718B

BURKE INDUSTRIES PUROSIL DIV. 07096 P/N 4J12282-718B

Lockheed Martin Logistic Services 1FUD6 P/N 4J12282-718B Sonfarrel Inc. 09036 P/N 4J12282-718B

BOMBARDIER INC CANADAIR 88308 P/N 4J12282-718B

Goodrich Corporation DBA Goodrich 31645 P/N 4J12282-718B Janel's Industries, Inc. 3B8L1 P/N 4J12282-718B

UFC AEROSPACE CORP. 5M696 P/N 4J12282-718B

LOBO VENTURES, LTD. DBA PRECISION 1HC54 P/N 4J12282-718B

Aero Engineering & Manufacturing 17772 P/N 4J12282-718B Pattonair USA, Inc. 2N335 P/N 4J12282-718B Handy Tool & Mfg. Co., Inc., The 91750 P/N 4J12282-718B Williams Aerospace & Manufacturing 3P104 P/N 4J12282-718B SPARES DBA Special Parts And 0V8N2 P/N 4J12282-718B Tect Hypervelocity, Inc. 34336 P/N 4J12282-718B

TOP NOTCH SEALS GASKETS CORP DBA 553X3 P/N 4J12282-718B

RAILRHODES INC 2V078 P/N 4J12282-718B

Lockheed Martin Corporation DBA 563J1 P/N 4J12282-718B

REFA INTERNATIONAL INC. DBA 023T7 P/N 4J12282-718B

United Seal & Rubber Company, Inc. 4R096 P/N 4J12282-718B

A WILEY ASSOCIATES 4R2Y5 P/N 4J12282-718B

DIALOGIC CORP. DBA DIALOGIC 0NFB8 P/N 4J12282-718B

Kirkhill Inc. DBA Haskon, Div of 3DBN7 P/N 4J12282-718B

BLADE INDUSTRIAL PRODUCTS INC. 1JYT1 P/N 4J12282-718B

GME MFG., INC. 1WKW6 P/N 4J12282-718B

LOCKHEED MARTIN SERVICES, LLC 1WL60 P/N 4J12282-718B

Aero Components, LLC 59213 P/N 4J12282-718B

NESTOR SALES LLC DBA AIM SUPPLY CO 1X015 P/N 4J12282-718B

TGC ENTERPRISES, INC. DBA ADVANCED 1CZP2 P/N 4J12282-718B

CHIEF AEROSPACE LLC DBA 5VX80 P/N 4J12282-718B

Canadian Commercial Corporation 98247 P/N 4J2282-718B Jonal Laboratories Incorporated 24664 P/N 4J12282-718B

LOCKHEED MARTIN CORPORATION DBA 98897 P/N 4J12282-718B

UNITED EQUIPMENT, INC. 25025 P/N 4J12282-718B

AEROSPACE ENGINEERING & SUPPORT, 1DA92 P/N 4J12282-718B

Kirkhill Inc. DBA 75345 P/N 4J12282-718B TNL Sales LLC DBA 1XLG2 P/N 4J12282-718B

PACIFIC AEROSTRUCTURES SERVICES 32YE0 P/N 4J12282-718B

GENERAL FORMING CORPORATION 26164 P/N 4J12282-718B

METALMART INTERNATIONAL, INC. DBA 4V463 P/N 4J12282-718B

TRP CONSTRUCTION INC DBA 0H0W4 P/N 4J12282-718B

HAN-BOONE INTERNATIONAL, INC. DBA 0Y6E8 P/N 4J12282-718B

Thaker Consulting & Mfg. Co. Corp. 34CZ9 P/N 4J12282-718B Charleston Aluminum, LLC 34FP9 P/N 4J12282-718B

YAMA MFG CO INCORPORATED 0RVE1 P/N 4J12282-718B

AERO-FAB SALES 4HUG4 P/N 4J12282-718B

Kirkhill Inc. DBA 50744 P/N 4J12282-718B

BASIC RUBBER AND PLASTICS CO. 6K404 P/N 4J12282-718B

JEDTCO CORP. 6K915 P/N 4J12282-718B

A AND M AEROSPACE, INC. 6Z800 P/N 4J12282-718B

MC KEOWN, ROBERT CO INC 7B953 P/N 4J12282-718B

METALMART INTERNATIONAL, INC. DBA 7L636 P/N 4J12282-718B

CPI AEROSTRUCTURES, INC. DBA CPI 9U679 P/N 4J12282-718B

KAMPI COMPONENTS CO., INC. 7Z016 P/N 4J12282-718B

SPHERE ALLIANCE INC DBA ADVANCED 6BBE5 P/N 4J12282-718B

IAW REFERENCE DRAWING NR 98897 4R23100

REVISION NR A DTD 05/05/1966

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP59-204

REVISION NR B DTD 10/14/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-402

REVISION NR G DTD 10/15/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS30000

REVISION NR AA DTD 07/18/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-001

REVISION NR L DTD 02/15/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP63-001V01J

REVISION NR T DTD 10/22/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS5025

REVISION NR AV DTD 11/05/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-001V03J

REVISION NR L DTD 08/14/1981

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP60-505

REVISION NR U DTD 12/20/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4J12282

REVISION NR E DTD 06/21/1985

PART PIECE NUMBER: 4J12282-718B

IAW REFERENCE DRAWING NR 98897 STP63-001

REVISION NR T DTD 11/13/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4J10047

REVISION NR Y DTD 05/01/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-302

REVISION NR AE DTD 05/17/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR D DTD 05/31/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP58-208

REVISION NR AC DTD 03/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS30000

REVISION NR AA DTD 06/04/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4J12282-717B

REVISION NR E DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 4J12282

REVISION NR E DTD 05/06/2010

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 SQAP-000071755

REVISION NR DTD 11/07/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 13873 000071755-18264

REVISION NR DTD 09/24/2018

PART PIECE NUMBER:

*** Product Number: 000071757 ** PID Text export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

The following companies are approved sources of supply based on SQS

23JUL2018:

98897,17772,34336,88308,98247,0H0W4,26164,2V078,91750,0V8N2,31645,75345

50744,3DBN7,09036,32YE0,379J3,4R2Y5,6K404,7Z016,9U679,1WL60,6Z800,24664

6K915,4R096,07096,4HUG4,0NFB8,0Y6E8,0ZBE8,023T7,1CZP2,1DA92,1FUD6,1HC54

1JYT1,1WKW6,1X015,1XLG2,2N335,7B953,7L636,25025,3B8L1,3P104,34CZ9,373M2

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

LOCKHEED CORP (98897)

MARIETTA GA

P/N 4J12282-717B

ACCEPTABLE SOURCES

CANADIAN COMMERCIAL CORP (98247)

OTTAWA CANADA

BOMBARDIER INC CANADAIR (88308)

DORVAL PQ CANADA

L & S MACHINE CO (34336)

WICHITA KS

COLLINS TECHNICAL RESEARCH INC (0H0W5)

SAN ANTONIO TX

AERO ENGINEERING & MFG (17772)

VALENCIA CA

IDENTIFY TO

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

THE ACCEPTABLE SOURCE(S) MUST MEET THE REQUIREMENTS

OF THE CURRENT REVISION OF THE OEM DRAWING

OFFERORS NOT CITED AS ACCEPTABLE SOURCES IN THE

PROCUREMENT ITEM DESCRIPTION ARE REQUIRED TO

OBTAIN SOURCE APPROVAL FROM THE DESIGN CONTROL

ACTIVITY. SOURCE APPROVAL REQUESTS/TECHNICAL

CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY,

WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE

II, CLASS C, STYLE 1.

Contractor first article/preproduction approval testing required. Use DI-NDTI-80809B in preparation of the first article report. Current revision of MIL-HDBK-831 may also be used for report format guidance.

First article testing shall be conducted IAW applicable drawings and drawing notes, specification, engineering instructions and specific requirements set forth in the contract. Additionally, 100% dimensional characteristics check shall be performed and results provided to the contracting officer. The first article offered must be manufactured at the facilities in which production quantities are procured under the contract.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .