SPE4A2-17-R-0022.pdf

SOLICITATION, OFFER AND AWARD 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 7900)

RATING PAGE OF PAGES

2. CONTRACT NUMBER 4. TYPE OF SOLICITATION 5. DATE ISSUED 6. REQUISITION/PURCHASE NUMBER

CODE7. ISSUED BY 8. ADDRESS OFFER TO (If other than item 7)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

9. Sealed offers in original and copies for furnishings the supplies or services in the Schedule will be received at the place specified in item 8, or if hand carried, in the depository located in until local time

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR

INFORMATION

CALL:

B. TELEPHONE (NO COLLECT CALLS)

AREA CODE NUMBER EXT.

11. TABLE OF CONTENTS

(X) SEC. DESCRIPTION PAGE(S) (X) SEC. PAGE(S)DESCRIPTION

A B C D E F G H

I

J

K

L

M EVALUATION FACTORS FOR AWARD

INSTRS., CONDS., AND NOTICES TO OFFERORS

REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

PART IV - REPRESENTATIONS AND INSTRUCTIONS

LIST OF ATTACHMENTS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

CONTRACT CLAUSESSOLICITATION/CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/COSTS

DESCRIPTION/SPECS./WORK STATEMENT

PACKAGING AND MARKING

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

CONTRACT ADMINISTRATION DATA

SPECIAL CONTRACT REQUIREMENTS

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

OFFER (Must be fully completed by offeror)

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) CALENDAR DAYS(%)

DATEAMENDMENT NO.AMENDMENT NO. DATE

15A. NAME AND

ADDRESS

OF OFFER-

OR

CODE FACILITY 16. NAME AND THE TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

15B. TELEPHONE NUMBER

AREA CODE NUMBER EXT.

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER SUCH

ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL OPEN COMPETITION:

10 U.S.C. 2304 (c) 41 U.S.C. 253 (c)

24. ADMINISTERED BY (If other than Item 7)

26. NAME OF CONTRACTING OFFICER (Type or print)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is unusable

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

25. PAYMENT WILL BE MADE BY

27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

CODE

ITEM

STANDARD FORM 33 (REV,. 9-97)

Prescribed by GSA - Far (48 CFR) 53.214 (c)

SEALED BID (IFB)

NEGOTIATED (RFP)

(Hour) (Date)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

1 7

GE Engine Performance Based Support Solution

SPE4A2

3. SOLICITATION NUMBER

SPE4A2-17-R-0022

one (1) DLA Reception Area, Bldg. 33 2:00 PM

A. NAME

SCOTT A. SZCZESNIAK

C. E-MAIL ADDRESS

scott.szczesniak@dla.mil

4 7

10/16/2017

804 279 5950

09/15/2017

X 4 gpp5289 Typewritten Text

DLA AVIATION

8000 JEFFERSON DAVIS HIGHWAY

RICHMOND, VA 23297-5100

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED

SPE4A2-17-R-0022

CONTINUED ON NEXT PAGE

SECTION A

SOLICITATION

A.1 INTRODUCTION

A.1.1 Defense Logistics Agency (DLA) Aviation is seeking a holistic, performance based support solution to improve the availability of General Electric (GE) manufactured aircraft engines via the GE Captains of Industry (COI) initiative. Based on the circumstances described herein a performance based supply chain management and logistics support solution is being sought for engines manufactured by GE Aircraft Engines including, but not limited to, the F101, F110, F118, F138, F404, F414, T64, T408, T700, TF34 and J-85 families of Engines.

A.1.2 This solicitation is for award of an umbrella Supplier Capability Contract (SCC), indentified herein as Phase 1, with overarching terms and conditions for potentially multiple engine specific subsumable contracts (Phases To Be Determined) for repairable and consumable material end items and support to engine maintenance to include both material and services, including potential repair or remanufacturing of repairables. Any resulting subsumable contract shall potentially be a Fixed Price (i.e. Firm Fixed Price, Fixed Price with Prospective Price Redetermination, Fixed Price Incentive – Firm Target, etc.) or Cost-type Requirements contract. The period of performance for any resulting subsumable contract shall have a five and a half-year base period and a single option period no greater than five years, to be exercised at the discretion of the Government.

The total period of performance for any subsumable contract shall not exceed ten and a half years. The total period of performance for the umbrella contract shall not exceed fifteen years.

A.1.3 Additionally, this solicitation is for award of an engine specific subsumable contract, identified herein as Phase 2, for holistic performance-based support of the T64 Aircraft Engine. This Phase 2 subsumable contract will be a multiple year, Requirements-Type contract, and is anticipated to be Firm-Fixed Price with one five and a half year base period and one five-year option period for a total potential contract duration of ten and a half years. The one-half year provides for contract implementation and transition efforts and leaves a potential ten years for execution.

A.2 OVERVIEW

A.2.1 This solicitation will be a sole source negotiated acquisition with GE. To meet the objectives specified in Section C, GE will perform the following logistics management functions by applying their Original Equipment Manufacturer (OEM) based engineering and technical expertise to improve: depot maintenance turnaround times, supply support, material management, reliability, engineering support and sustainment elements, obsolescence management, packaging, storage, transportation and field engineering support of engines manufactured by GE. This level of support shall be provided for any subsumable contract with engine specific requirements.

A.2.2 The logistics solution being acquired is a comprehensive and complete supply chain management program to support GE manufactured aircraft engines identified in Section A.1.1. GE aircraft engine components pose significant engineering, technical, diminishing manufacturing sources and raw material acquisition challenges. DLA has determined that real-time access to the engineering expertise, technical data and

CONTINUED ON NEXT PAGE

understanding of the manufacturing processes offered by the OEM is essential to successfully provide supply support for the maintenance of these engines. As such, the acquisition has been approved for Other than Full and Open Competition as prescribed by FAR 6.302-1.

A.2.3 The solicitation requires GE to provide a holistic support solution, with potentially primary support to any identified military services customer to possibly include Foreign Military Sales (FMS) customers. Any future separate engine specific requirement shall be subject to its own distinct acquisition coordination for that separate phase and subsumable contract action.

A.2.4 The Statement of Work (SOW) at Section C herein identifies the Government’s objectives for the all-encompassing performance based effort (Phase 1) and is included herein as Attachment 1. The T-64 Engine SOW addressing the requirements for the Phase 2 subsumable contract are included herein as Attachment 3. Any future separate engine specific requirement (Phases To Be Determined) shall be subject to its own distinct SOW. GE is instructed to provide its proposal that meets the Government’s objectives while providing a holistic solution at a fair and reasonable price.

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

B.1 GE shall submit proposed pricing for any potential future requirements and subsumable contract types when solicited (Phases TBD).

B.2 GE is required to submit Certified Cost or Price Data in accordance with FAR 15.403-4 unless an exception from certified cost or pricing data requirements applies.

B.3 GE shall submit proposed pricing for each pricing period in accordance with the solicited pricing structure for any potential future requirements. GE shall provide “bottoms up” detail of the aforementioned proposal methodology in full, transparent detail to ensure a fair and reasonable price determination can be made.

B.4 Any subsumable contract option periods shall be subject to the separate option provisions contained in each subsumable contract action.

B.5 The requirements to be priced in support of the T64 Engine subsumable contract are included herein as Attachment 3.

SECTION C

DESCRIPTION/SPECIFICATION/STATEMENT OF WORK

C.1 SCC

C.1.1 The SOW included herein as Attachment 1 defines the scope of the SCC for improving material support for GE Engine platforms and requirements while decreasing DLA’s inventory position and material costs and provides a general framework for the SOWs that will accompany each subsumable contract under the SCC.

C.2 T64 C.2.1 The Contractor shall increase T64 engine availability as defined by the scope of the SOW included herein as Attachment 3, all at a reduced overall cost to the Government.

CONTINUED ON NEXT PAGE

SECTION D

PACKAGING AND MARKING

D.1 Commercial packaging in accordance with American Society for Testing and Materials (ASTM), ASTM D-3951 is acceptable; however, packages shall be prepared in accordance with labeling requirements of MIL-STD-129P.

D.2 Radio Frequency Identification (RFID) requirements shall apply consistent to the requirements at DFARS 252.211-7006 is incorporated herein, as applicable.

SECTION E

INSPECTION AND ACCEPTANCE

Inspection & Acceptance (I&A) terms are incorporated for both Destination and Origin as applicable. Certain individual engine requirements under the umbrella SCC may establish alternate Government Contract Quality Assurance (GCQA) processes that allow for modified I&A terms. As appropriate, those requirements will be set forth in the applicable subsumable contract SOW.

SECTION F

DELIVERIES OR PERFORMANCE

F.1 FOB terms for both Destination and Origin are included. As appropriate, those requirements will be set forth in the applicable subsumable contract for each individual engine requirement.

F.2 While balancing priorities and shipping schedules, the contractor shall consolidate shipments to the maximum extent practicable.

F.3 The contractor shall maintain comprehensive records of all shipments including the transportation control number, the date of shipment, weights, destinations, order number, and transportation contract shipped against.

SECTION G

CONTRACT ADMINISTRATION DATA

Notwithstanding the Contractor’s responsibility for total management during the performance of the contract, the administration of the contract will require maximum coordination between the Government and the Contractor. Data requirements shall be determined for each applicable subsumable contract.

SECTION H

SPECIAL CONTRACT REQUIRMENTS

H.1 DEFENSE CONTRACT MANAGEMENT AGENCY (DCMA)

The solicitation provides for the utilization of DCMA for inspection & acceptance, transportation coordination, monitoring of contract performance in accordance with the negotiated SOW, and other functions delegated by the Contracting Officer, as appropriate.

H.2 GOVERNMENT FURNISHED TOOLING

H.2.1 In accordance with FAR 45.201(c), GE shall include the following in its proposal for each engine specific subsumable contract solicitation:

CONTINUED ON NEXT PAGE

H.2.1.1 A list or description of all Government property that the offeror or its subcontractors propose to use on a rent-free basis. The list shall identify the accountable contract under which the property is held and the authorization for its use (from the contracting officer having cognizance of the property);

H.2.1.2 The dates during which the property will be available for use (including the first, last, and all intervening months) and, for any property that will be used concurrently in performing two or more contracts, the amounts of the respective uses in sufficient detail to support prorating the rent;

H.2.1.3 The amount of rent that would otherwise be charged in accordance with FAR 52.245-9, Use and Charges; and H.2.1.4 A description of the offeror’s property management system, plan, and any customary commercial practices, voluntary consensus standards, or industry-leading practices and standards to be used by the offeror in managing Government property.

H.2.2 GE shall flow-down to its suppliers, all Government Furnished Property and Tooling clauses when tooling is used in supply of material for SCC performance and any resulting subsumable contract. GE, as the prime contractor, is ultimately responsible for any Government tooling utilized in support of contract performance.

SECTION I

CONTRACT CLAUSES

Note: The solicitation contains provisions and clauses that may be self-deleting / not applicable based on the strategy and SOW proposed by the offeror. Any resulting contract will be a stand-alone document and include the award clauses and provisions applicable to the negotiated contract.

I.1 INCORPORATED BY REFERENCE

I.1.1 Except for provisions and clauses prescribed in FAR 52.107, any provision or clause that can be accessed electronically is incorporated by reference to include DLA Directive (DLAD) Procurement (Proc) Notes and DLA Aviation Acquisition Notices (DAANs). However, upon request, the contracting officer shall provide the full text of any provision or clause incorporated by reference.

I.1.2 All clauses, provisions, procurement notes, and acquisition notices required in this section or in any other section of the uniform contract format are included as Attachment 2 included herein.

I.1.3 The matrix for the key elements of Attachment 2 are identified in Section I.3.

I.1.4 All provisions and clauses that require completion by the offeror or prospective contractor are identified by the “Fill-in” element of Attachment 2. All applicable provisions and clauses must be completed by the offeror or prospective contractor and must be submitted with the offer. An electronic address where the full text of each provision or clause may be accessed is identified by the “Link” element of Attachment 2.

I.2 ORDER OF PRECEDENCE

CONTINUED ON NEXT PAGE

I.2.1 Provisions and clauses contained in the umbrella SCC shall take precedence over any potential future subsumable contracts’ provisions and clauses, unless specifically stated otherwise in a subsumable contract. Any umbrella SCC provisions or clauses not applicable to any potential subsumable contract shall be self-deleting. For clarity, umbrella SCC provisions and clauses applicable to each separate subsumable contract shall be identified in an attachment to that subsumable contract.

I.2.2 Any Government or contractor clause fill-in sections identified with an asterisk (*) in the umbrella SCC shall be definitized in each separate subsumable contract with the full text of the fill-in section of the applicable clause.

I.3 KEY ELEMENTS (MATRIX)

Element Definition Format Regulation Applicable regulation or policy reference:

FAR/DFARS/DLAD/DLAD Proc Notes/DAANs Text

Part Applicable acquisition policy 12=FAR Part 12, 15=FAR Part 15, BOTH=FAR 12 & 15

Number Provision/Clause number Number Title Title of provision/clause Text Date Revision date of provision/clause Date (Month-Year) Link Electronic access link to provision/clause full text Hyperlink UCF Uniform Contract Format section Text IBR Incorporated By Reference Y=Yes, N=No Fill-in Provision/Clause section fill-in required C=Contractor, G=Government, B=Both

Page Page number location of full text of provision/clause if applicable

Text

SECTION J

LIST OF ATTACMENTS

Attachment 1 – SCC SOW Attachment 2 – Provisions and Clauses Attachment 3 – T64 SOW

SECTION K

REPRESENTATION, CERTIFICATIONS, AND OTHER

STATEMENTS OF OFFERORS OR RESPONDENTS

All clauses, provisions, procurement notes, and acquisition notices required in this section or in any other section of the uniform contract format are included as Attachment 2 included herein.

All clauses, provisions, procurement notes, and acquisition notices required in this section or in any other section of the uniform contract format are included as Attachment 2 included herein.

SECTION M

EVALUATION FACTORS FOR AWARD

All clauses, provisions, procurement notes, and acquisition notices required in this section or in any other section of the uniform contract format are included as Attachment 2 included herein.

SECTION L

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

OR RESPONDENTS

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

Tech

NIIN FSC Nomenclature AMC

0:

Acquisition Method Code (AMC)

0 Not established.

1 Suitable for competitive acquisition.

2 Suitable for competitive acquisition for the first time.

3 Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.

4 Acquire, for the first time, directly from the actual manufacturer rather than the prime contractor who is not the actual manufacturer.

5 Acquire only from the prime contractor although the engineering data identifies the CAGE and part number of a source other than the prime.

AMSC

0: Acquisition Method Suffix Code (AMSC) 0 Not established.

A Government's rights to use data in its possession is questionable. Valid AMCs: 1, 2, 3, 4 and 5.

B Acquisition of this part is restricted to source(s) specified on: Source Control, Altered Item or Selected Item drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.

C This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

D The data needed to produce this item from additional sources is not physically available.

Valid AMCs: 3, 4 and 5.

G The Government has unlimited rights to the technical data, and the data package is complete.

Valid AMCs: 1 and 2.

H The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). Valid AMCs: 1, 2, 3, 4 and 5.

K This part must be produced from class 1A castings (e.g., class 1 of MIL-C-6021) and similar type forgings. The part must be procured only from sources which use castings or forgings obtained from approved (controlled) source(s). Valid AMCs: 1, 2, 3, 4 and 5.

L The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). Valid AMCs: 1, 2, 3, 4 and 5.

M Master or coordinated tooling is required to produce this part. This tooling is not owned by the Government or, where owned, cannot be made available to other sources. Valid AMCs: 1, 2, 3, 4 and 5.

N This part requires special test and/or inspection facilities to determine and maintain ultra-precision quality for its function or system integrity. Substantiation and inspection of the precision or quality cannot be accomplished without such specialized test/inspection facilities.

Valid AMCs: 1, 2, 3, 4 and 5.

P The rights to use the data needed to purchase this part from additional sources are not owned by the Government and cannot be purchased. Valid AMCs: 1, 2, 3, 4 and 5.

Q The government does not have adequate data, lacks rights to data, or both, needed to purchase this part from additional sources. Valid AMCs: 1, 2, 3, 4 and 5.

R The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them.

Valid AMCs: 1, 2, 3, 4 and 5.

S Procurement of this item restricted to limited source(s) because security classifiation of confidential or higher prevents public disclosure. Valid AMCs: 1, 2, 3, 4 and 5.

T Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.

U The cost to the Government to breakout this part and acquire it competitively has been determined to exceed the projected savings over the life span of the part. Valid AMCs: 1, 2, 3, 4 and 5.

V This part has been designated a high-reliability part under a formal reliability program.

Probability of failure would be unacceptable from the standpoint of safety of personnel and/or equipment. The cognizant engineering activity has determined that data to define and control reliability limits cannot be obtained nor is it possible to draft adequate specifications for this purpose. Valid AMCs: 1, 2, 3, 4 and 5.

Y The design of this part is unstable. Engineering, manufacturing, or performance characteristics indicate that the required design objectives have not been achieved. Major changes are contemplated because the part has a low process yield or has demonstrated marginal performance during tests or service use. These changes will render the present part obsolete and unusable in its present configuration. Limited acquisition from the present source is anticipated pending configuration changes. Valid AMCs: 1, 2, 3, 4 and 5.

Z This part is a commercial/non-developmental/off-the-shelf-item. Valid AMCs: 1, 2, 3, 4 and 5.

CSI

Critical Safety Item (CSI) derived from Special Procedures Code (SPC)

SPC Service 03 CSI-Navy 05 CSI-Army 06 CSI-AirF (Air Force) 07 Chem-Bio (CBDE)

SPC

Special Procedures Code (SPC)

01 - AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE)

Navy Carrier and Carrier training

02 - INDIVIDUAL REPAIR PART ORDERING DATA (IRPOD)

Items within the Navy Nuclear community with Specific Tech data needs identified in a bi-monthly IRPIL (Individual Repair Parts Issue List)

03 - NAVY IDENTIFIED CRITICAL SAFETY ITEM (CSI)

All of these items will also be Flight Safety Indicator (FSI)

04 - INTERCONTINENTAL BALLISTIC MISSILE (ICBM) ITEM

Air Force defined items, also called NUCLEAR HARDENED

05 - ARMY DESIGNATED CRITICAL SAFETY ITEM (CSI)

All of these items will also be Flight Safety Indicator (FSI)

06 - AIR FORCE DESIGNATED CRITICAL SAFETY ITEM (CSI)

All of these items will also be Flight Safety Indicator (FSI)

07 - CHEMICAL BIOLOGICAL DEFENSE EQUIPMENT ITEM (CBDE)(CSI)

U.S. Army Edgewood Chemical Biological Center (ECBC)

97 - EDGEWOOD CHEMICAL BIOLOGICAL CENTER

U.S. Army Edgewood Chemical Biological Center (ECBC) note: ALL NSNs which have an SPC of ‘03’,‘05’ or ‘06’ are considered FSI.

FSI items will not necessarily be an SPC of ‘03’, ‘05’ or ‘06’.

PIC

Place of Inspection Code (PIC)

1 Inspection at Source / Acceptance at Source 2 Inspection at Destination / Acceptance at Destination C Inspection at Source / Acceptance at Source (used for Critical application items) 3 Inspection at Source/ Acceptance at Destination (used for Hazardous Materials) 4 Inspection at Destination/ Acceptance at Source (used for Hazardous Materials)

QCC

Quality Control Code (QCC)

QCC -- First Position (Contract Quality Requirements) A Contract Quality Requirements further defined.

Material Master - Additional Data - Internal Comments B Commercial (Any System Offered) C Contractor Responsibility D Standard Inspection E Higher Level Contract Quality F Higher Level Contract Quality - ISO 9001:2000 G Commercial - First Article Testing Government H Contractor Responsibility - First Article Testing Government J Standard Inspection - First Article Testing Government K Higher Level Contract Quality - First Article Testing Government L Higher Level Contract Quality ISO 9001:2000 First Article Testing Government M Commercial - First Article Testing Contractor N Contractor Responsibility - First Article Testing Contractor P Standard Inspection - First Article Testing Contractor Q Higher Level Contract Quality - First Article Testing Contractor R Higher Level Contract Quality ISO 9001:2000 First Article Testing Contractor QCC -- Second Position (Quality Subsystem Identification) A No Quality Subsystem Requirements B Product Verification Testing (PVT) C Measurement and Test Equipment (M/TE) D Certificate of Conformance (CoC) E Product Verification Testing / Measurement and Test Equipment (PVT / M/TE) F Product Verification Testing / Certificate of Conformance (PVT / COC) G Product Verification Testing / Measurement and Test Equipment / Certificate of Conformance (PVT / M/TE / COC) H Measurement and Test Equipment / Certificate of Conformance (M/TE / COC) QCC -- Third Position (Quality Specific Identification) A No Specific requirements B Calibration System Requirements C Quality Assurance Letter of Instruction (QALI) D Pre-award Survey E Post-award Conference F Shelf Life - Depot Storage Standard Actions G Statistical Process Control (SPC) H CIM/IMQIP Controlled Industrial Material / Industrial Material Quality Improvement Program J Deliverable Data - DD 1423 K Two or more codes apply L Local Clause(s) apply M One or more codes and local clause(s) apply N Dermatology and Toxicity (DSCP Medical use) P Additional Requirements - Material Master Additional Data - Internal Comments

FAT

First Article Test Indicator Prod Lot Tst

Production Lot Testing AMPL Count

Henry J. Murray Jr.:

How many AMPL references are there for this NIIN?

RNVC 1

Reference Number Variation Code (RNVC) Code indicates that a cited reference number is item identifying, is not item identifying, or is a reference number for information only.

1 - A design control reference or other reference number that does not identify an item of production without the use of additional information, or is either a specification, part, type or similar reference number that does not identify an item of supply without the use of additional information.

2 - A design control reference or other reference number that is an item-identifying number for an item of production, or is either a source control reference, a specification or a standard part, type, or similar reference number that is an item-identifying number for an item of supply.

3 - A vendor's reference (part) number on a source control item, as defined in ASMEY- 14.24M and ASMEY-14.100M, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the code 3. This code is limited to a type 1B or 4B item identification.

8 - A non-item-identifying reference number that is added to a replacement NSN as a result of a cancel-use action on a NSN recorded with ISC 3 or E. It is used to indentify the original item of supply/replaced item. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.

9 - A reference number which was the Design Control Reference for the item of supply concept (Original Design Activity) that is now inactive coded Reference Number Category Code (RNCC) 3; a specification, standard, or other reference number which is superseded, cancelled, obsolete or discontinued and is coded RNCC 5; a reference number for information only coded RNCC 6; a drawing which is the Single Controlling Reference Number (SCRN) coded RNCC 2 or 7; or a drawing number reference coded RNCC D.

RNCC 1

Reference Number Category Code (RNCC) Code that designates the relationship of a reference number to the item of supply.

1 - Source Control Reference.

2 - Definitive Government Specification or Standard Designator Reference.

3 - Design Control Reference.

4 - Non-definitive U.S. Government Specification or Standard Reference.

5 - Secondary Reference.

6 - Informative Reference.

7 - Vendor Item Drawing Reference (formerly specification control reference).

8 - US/NATO-Reproduced Item Identification Number.

A - Design Category Packaging and Related Logistics Data Reference Number.

C - Advisory Reference.

D - Drawing Number Reference.

E - Replaced Reference Number.

Part Number 1 CAGE 1 Vendor 1 RNVC 2 RNCC 2 Part Number 2 CAGE 2 Vendor 2 RNVC 3 RNCC 3 Part Number 3 CAGE 3 Vendor 3 RNVC 4 RNCC 4 Part Number 4 CAGE 4 Vendor 4 RNVC 5

Reference Number Variation Code (RNVC) Code indicates that a cited reference number is item identifying, is not item identifying, or is a reference number for information only.

1 - A design control reference or other reference number that does not identify an item of production without the use of additional information, or is either a specification, part, type or similar reference number that does not identify an item of supply without the use of additional information.

2 - A design control reference or other reference number that is an item-identifying number for an item of production, or is either a source control reference, a specification or a standard part, type, or similar reference number that is an item-identifying number for an item of supply.

3 - A vendor's reference (part) number on a source control item, as defined in ASMEY- 14.24M and ASMEY-14.100M, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the code 3. This code is limited to a type 1B or 4B item identification.

8 - A non-item-identifying reference number that is added to a replacement NSN as a result of a cancel-use action on a NSN recorded with ISC 3 or E. It is used to indentify the original item of supply/replaced item. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.

9 - A reference number which was the Design Control Reference for the item of supply concept (Original Design Activity) that is now inactive coded Reference Number Category Code (RNCC) 3; a specification, standard, or other reference number which is superseded, cancelled, obsolete or discontinued and is coded RNCC 5; a reference number for information only coded RNCC 6; a drawing which is the Single Controlling Reference Number (SCRN) coded RNCC 2 or 7; or a drawing number reference coded RNCC D.

RNCC 5

Reference Number Category Code (RNCC) Code that designates the relationship of a reference number to the item of supply.

1 - Source Control Reference.

2 - Definitive Government Specification or Standard Designator Reference.

3 - Design Control Reference.

4 - Non-definitive U.S. Government Specification or Standard Reference.

5 - Secondary Reference.

6 - Informative Reference.

7 - Vendor Item Drawing Reference (formerly specification control reference).

8 - US/NATO-Reproduced Item Identification Number.

A - Design Category Packaging and Related Logistics Data Reference Number.

C - Advisory Reference.

D - Drawing Number Reference.

E - Replaced Reference Number.

Part Number 5 CAGE 5 Vendor 5 RNVC 6 RNCC 6 Part Number 6 CAGE 6 Vendor 6 RNVC 7 RNCC 7 Part Number 7 CAGE 7 Vendor 7 RNVC 8 RNCC 8 Part Number 8 CAGE 8 Vendor 8 RNVC 9 RNCC 9 Part Number 9 CAGE 9 Vendor 9 RNVC 10 RNCC 10 Part Number 10 CAGE 10 Vendor 10

000055610 3040 BELL CRANK 1 C CSI-Navy 03 C KEJ Y Y 3 2 3 5018T05G02 99207 General Electric Company DBA Ge 2 5 5018T05G02 03350 General Electric Company DBA Ge 2 5 5018T05G02 28884 Tss Technologies, Inc. DBA Tss

000108220 5315 PIN,STRAIGHT,HEADLE 1 G no 2 CAA N 1 2 3 2004T59P01 03350 General Electric Company DBA Ge

000112602 5315 PIN,SHOULDER,HOLLOW 3 C CSI-Navy 03 C ECC N 2 2 3 3008T53P01 03350 General Electric Company DBA Ge 2 8 3008T53P01 D3309 Mtu Aero Engines Ag DBA Mtu

000160274 5325 RING,RETAINING 3 P no 2 CAA N 1 2 3 15880 71895 Delavan, Inc. DBA A Utc Aerospace

000404002 5310 SHANK NUT,SELF-LOCK 1 B CSI-Navy 03 C ECC N 5 2 3 J144P05C 07482 General Electric Company DBA Ge 2 5 J144P05B 15563 Tricor Direct, Inc. DBA Seton 2 5 J144P05D 27238 Bristol Industries 2 5 J144P05B 99207 General Electric Company DBA Ge 2 5 J144P05D 99207 General Electric Company DBA Ge

000770892 2840 PLATE,COOLING,ROTOR 3 C CSI-Navy 03 C FCA N 2 2 3 4022T37P03 99207 General Electric Company DBA Ge 2 5 4022T37P01 99207 General Electric Company DBA Ge

000770894 5330 SEAL,INTERSTAGE 3 C CSI-Navy 03 C DAC N 3 2 3 5006T54P03 99207 General Electric Company DBA Ge 2 5 5006T54P02 99207 General Electric Company DBA Ge 2 8 5006T54P02 D3309 Mtu Aero Engines Ag DBA Mtu

000794069 2840 SUPPORT,SEAL 1 C CSI-Navy 03 C LCP Y Y 3 2 3 5005T78P01 99207 General Electric Company DBA Ge 2 5 5005T78P01 03350 General Electric Company DBA Ge 2 5 5005T78P01 24008 B E Tool Company, Inc. DBA Be

000794085 2840 CONTROL ASSY,FEEDBA 1 B CSI-Navy 03 C LCP Y Y 2 2 3 570-510-011 06970 Cablecraft Motion Controls Llc 2 3 570-510-011 0ANK9 Cablecraft Motion Controls Llc DBA

000794279 2840 ADAPTER,TUBE TO POW 3 C no C EBA N 1 2 3 3010T19P01 99207 General Electric Company DBA Ge

000794328 2840 COVER,ACCESSORY TUB 1 C no 2 FCP N N 3 2 3 3012T36P01 99207 General Electric Company DBA Ge 2 5 3012T36P01 32543 Whitcraft Llc DBA Whitcraft 2 5 3012T36P01 59736 Wbh, Inc. DBA Aerospace Products

000794329 5342 BRACKET,ANGLE,ENGIN 3 C no 2 DCB N 1 2 3 3013T46P01 99207 General Electric Company DBA Ge

000794330 1560 COVER,ACCESS,AIRCRA 1 C no 2 FAM N N 2 2 3 3013T77P01 99207 General Electric Company DBA Ge 2 5 3013T77P01 51212 Bomco, Inc.

000794333 5340 COVER,ACCESS 3 L no 2 CAA N 1 2 3 37B202060P102 99207 General Electric Company DBA Ge

000794334 5340 STRAP,RETAINING 3 D no 2 FCA N 1 2 3 37B202223P102 99207 General Electric Company DBA Ge

000794335 2840 HOUSING,GEARBOX,TUR 1 C CSI-Navy 03 C LCJ Y Y 2 2 3 37C302224P103 99207 General Electric Company DBA Ge 2 5 37C302224P103 51992 Union Machine Company Of Lynn, 000794346 3110 PLATE,RETAINING,BEA 3 C CSI-Navy 03 C FCA N 2 2 3 37C302325P102 99207 General Electric Company DBA Ge 2 8 37C302325P102 D3309 Mtu Aero Engines Ag DBA Mtu

000794475 3110 PLATE,RETAINING,BEA 3 C CSI-Navy 03 C FEP N 1 2 3 3011T91P01 99207 General Electric Company DBA Ge

000802806 2840 HOUSING,ANTIFRICTIO 3 C CSI-Navy 03 C FEP N N 1 2 3 37C302223P104 99207 General Electric Company DBA Ge

000802836 3110 PLATE,RETAINING,BEA 3 C no C N 2 2 3 37C302234P102 99207 General Electric Company DBA Ge 2 8 37C302234P102 D3309 Mtu Aero Engines Ag DBA Mtu

000811982 5330 SEAL,PLAIN ENCASED 1 B CSI-Navy 03 C DAC N 1 2 3 40594 77842 Eaton Corporation DBA Centurian

000811985 6695 TRANSDUCER,MOTIONAL 3 B CSI-Navy 03 C FCP N N 1 2 3 384477 60678 Rosemount Aerospace Inc. DBA

000816353 5340 PLUG,EXPANSION 1 G no 2 CAA N 1 2 2 MS9176-04 96906 Military Standards Promulgated By

000817851 3040 GEARSHAFT,SPUR 3 C CSI-Navy 03 C KEB Y 3 2 3 4010T91P01 03350 General Electric Company DBA Ge 2 5 4010T91P01 99207 General Electric Company DBA Ge 2 8 4010T91P01 D3309 Mtu Aero Engines Ag DBA Mtu

000858968 2840 HEAD ASSY,PUMP 3 C no 2 FCB N N 1 2 3 32-53005-1011-2 86329 Parker-Hannifin Corporation DBA

000859041 4820 VALVE,CHECK 1 B no 2 FCA N N 3 2 3 K2729-10 55469 Essex Industries, Inc. 2 5 4008T20P01 99207 General Electric Company DBA Ge 2 5 4008T20P04 99207 General Electric Company DBA Ge

000859083 2840 HOUSING,SEAL,BEARIN 3 C CSI-Navy 03 C FEP N 1 2 3 37C302228P103 99207 General Electric Company DBA Ge

000881668 2840 DEFLECTOR,OIL 1 C no C RCP Y Y 2 2 3 3014T25P02 99207 General Electric Company DBA Ge 2 5 3014T25P02 65813 German Machined Products, Inc. DBA

000978969 5325 INSERT,SCREW THREAD 1 C no 2 CAA N 3 2 3 GH19032-50 73957 Groov-Pin Corporation 2 5 R1388P104 03350 General Electric Company DBA Ge 2 5 R1388P104 83324 Arconic Global Fasteners Rings, 001019842 5342 BRACKET,ANGLE,ENGINE 1 G no 2 DAB N 1 2 3 3013T30P01 99207 General Electric Company DBA Ge

001028674 4730 TEE,TUBE 1 C no 2 DAA 2 2 3 4014T41G01 99207 General Electric Company DBA Ge 2 5 4014T41G01 04602 B-C-D Metal Products, Inc.

001035912 4710 TUBE ASSEMBLY,METAL 1 R no 2 DAA 2 2 3 4009T77P01 99207 General Electric Company DBA Ge 2 5 4009T77P01 04602 B-C-D Metal Products, Inc.

001044668 2840 HOUSING,GEARBOX,TUR 3 C CSI-Navy 03 C FEP N 2 2 3 6003T27G01 99207 General Electric Company DBA Ge 2 8 6003T27G01 D3309 Mtu Aero Engines Ag DBA Mtu

001044669 2840 COVER,GEAR HOUSING 1 C CSI-Navy 03 C FCB Y 3 2 3 6003T28G01 99207 General Electric Company DBA Ge 2 5 6003T28G01 51992 Union Machine Company Of Lynn, 2 8 6003T28G01 D3309 Mtu Aero Engines Ag DBA Mtu

001044670 2840 HOUSING,POWER TAKE 3 C CSI-Navy 03 C FEP N 2 2 3 6005T40P01 99207 General Electric Company DBA Ge 2 8 6005T40P01 D3309 Mtu Aero Engines Ag DBA Mtu

001060068 2840 SHROUD SECTOR,FOURT 1 C no C LCJ Y Y 4 2 3 4014T04G06 99207 General Electric Company DBA Ge 2 5 4014T04G06 01993 Ferrotherm Corporation 2 5 4014T04G06 03350 General Electric Company DBA Ge 2 5 4014T04G06 50554 Metro Machine Works, Inc.

001060071 2840 SHROUD SECTOR,SECON 3 C no 2 FCB N N 1 2 3 4014T22G06 99207 General Electric Company DBA Ge

001069047 5330 SEAL,AIR,TURBINE,ST 3 C CSI-Navy 03 C FCP N 2 2 3 4007T94G04 99207 General Electric Company DBA Ge 2 5 4007T94G02 99207 General Electric Company DBA Ge

001069689 1680 BELL CRANK 1 C CSI-Navy 03 C LCP Y Y 1 2 3 5018T05G01 99207 General Electric Company DBA Ge

001069690 3040 BELL CRANK 1 C CSI-Navy 03 C FEP N 2 2 3 5018T05G03 99207 General Electric Company DBA Ge 2 5 5018T05G03 28884 Tss Technologies, Inc. DBA Tss

001071854 5310 NUT,PLAIN,SLOTTED,H 3 C no 2 CAA N 1 2 3 R1199P02 99207 General Electric Company DBA Ge

001074542 2840 SUPPORT RING,SHROUD 3 C no 2 FCA N N 1 2 3 5008T75P02 99207 General Electric Company DBA Ge

001113042 5365 SHIM 1 G no 2 DAB N 2 2 3 37C302237P101 99207 General Electric Company DBA Ge 2 5 37C302237P101 0AMR1 Aerospace Industries Llc

001122133 5331 O-RING 1 G no 2 CAA N 1 2 3 J221P228 07482 General Electric Company DBA Ge

001151341 5340 BRACKET,ANGLE 1 G no 2 CAA N 1 2 2 MS9101-02 96906 Military Standards Promulgated By

001154977 5330 PACKING,PREFORMED 1 G no 2 CAA N 1 2 3 2004T75P01 99207 General Electric Company DBA Ge

001226690 2840 LOCK,ROTATION 3 C no 1 FCB N 1 2 3 200892-9 75370 Kaydon Ring Seal, Inc. DBA Kaydon

001245630 4720 HOSE ASSEMBLY,NONME 3 B CSI-Navy 03 C FBA 1 2 3 13000108-0111 78570 Smiths Tubular Systems-Laconia, 001282365 4730 ELBOW,FLANGE TO TUB 3 C no 2 FCA N N 1 2 3 3007T47P01 99207 General Electric Company DBA Ge

001446366 5340 CLAMP,LOOP 1 G no 2 CAA N 2 2 3 3015T10P02 99207 General Electric Company DBA Ge 2 5 3015T10P02 04602 B-C-D Metal Products, Inc.

001507545 2840 HOUSING,OUTBOARD 3 C CSI-Navy 03 C LCP Y Y 1 2 3 200805-02 75370 Kaydon Ring Seal, Inc. DBA Kaydon

001507557 2840 HOUSING,INBOARD 3 C CSI-Navy 03 C LCP Y Y 2 2 3 200805-1 75370 Kaydon Ring Seal, Inc. DBA Kaydon 2 5 200805-01 75370 Kaydon Ring Seal, Inc. DBA Kaydon

001518784 5310 WASHER,KEY 3 R no 2 CAA N 1 2 3 388752100031 86329 Parker-Hannifin Corporation DBA

001519238 5307 STUD,SHOULDERED 3 C CSI-Navy 03 C ECC N 1 2 3 4026T91P01 99207 General Electric Company DBA Ge

001519897 5305 SCREW,ADJUSTABLE 3 R no 2 CAA N 1 2 3 357851000061 86329 Parker-Hannifin Corporation DBA

001521241 4730 ELBOW,AIR DISCHARGE 3 C no 2 FCA N N 1 2 3 4012T30G03 99207 General Electric Company DBA Ge

001521825 2925 IGNITER,SPARK,GAS T 3 B no 2 BAA N N 1 2 3 FHE111-30 0AFL4 Champion Aerospace Llc DBA

001582313 3110 BEARING,BALL,ANNULAR 1 B CSI-Navy 03 C FEP N N 1 2 3 37B202168P103 38443 Skf Usa Inc. DBA Skf Aeroengine

001582314 5365 RING,LOCK,KEYED 3 C no 2 FCB N N 1 2 3 4015T78P01 99207 General Electric Company DBA Ge

001582324 3110 BEARING,BALL,ANNULA 1 B CSI-Navy 03 C FCA N N 4 2 3 37B201507P104 83086 New Hampshire Ball Bearings, Inc. 2 5 37B201507P103 38443 Skf Usa Inc. DBA Skf Aeroengine 2 5 37B201507P103 99207 General Electric Company DBA Ge 2 5 37B201507P104 99207 General Electric Company DBA Ge

001582325 3110 BEARING,BALL,ANNULAR 1 B CSI-Navy 03 C FEP N N 4 2 3 37B201505P104 83086 New Hampshire Ball Bearings, Inc. 2 5 37B201505P103 38443 Skf Usa Inc. DBA Skf Aeroengine 2 5 37B201505P103 99207 General Electric Company DBA Ge 2 5 37B201505P104 99207 General Electric Company DBA Ge

001599011 3020 GEAR, SPUR 1 C CSI-Navy 03 C KBJ Y 3 2 3 4010T89G02 99207 General Electric Company DBA Ge 2 5 4010T89G02 03350 General Electric Company DBA Ge 2 5 4010T89G02 11867 Equitable Engineering Company, 001645870 2840 SEGMENT,NOZZLE,TURB 3 C CSI-Navy 03 C FCA N 1 2 3 5009T40P08 99207 General Electric Company DBA Ge

001657796 5325 RING,RETAINING 3 C CSI-Navy 03 C FEP N 1 2 3 4026T36P01 99207 General Electric Company DBA Ge

001689966 2925 TUBE IGNITER,ADAPTE 1 C no 2 2 2 3 3901T33P01 99207 General Electric Company DBA Ge 2 5 3901T33P01 24115 Palmer Manufacturing Co., Llc DBA

001769369 2840 SUPPORT,EXITER 3 Q no 2 FCB N 1 2 3 6012T59G01 99207 General Electric Company DBA Ge

001898519 5325 INSERT,SCREW THREAD 1 G no C DAA N 2 2 3 3018T56P01 99207 General Electric Company DBA Ge 2 5 3018756P01 99207 General Electric Company DBA Ge

002219643 5365 RING,ANTI-ROTATION 1 G no 1 ECA N N 1 2 3 3015T90P01 99207 General Electric Company DBA Ge

002321136 4710 TUBE ASSEMBLY,METAL 1 G no C DBA 1 2 3 4012T31G02 99207 General Electric Company DBA Ge

002331151 2995 VALVE ASSY,14TH STA 3 C no 2 FCB N 1 2 3 37C302336G007 99207 General Electric Company DBA Ge

002612882 5365 RING,EXTERNALLY THR 3 C CSI-Navy 03 C FCP N 1 2 3 3016T36P01 99207 General Electric Company DBA Ge

003765829 2840 SUPPORT,OIL TUBE PO 3 C CSI-Navy 03 C LCP Y 1 2 3 4026T23P01 99207 General Electric Company DBA Ge

003853509 3120 BUSHING,SLEEVE 1 C no 2 FCA N 3 2 3 2901T23P01 03350 General Electric Company DBA Ge 2 5 2901T23P01 03983 Sterling Machine Company, Inc. 2 5 2901T23P01 99207 General Electric Company DBA Ge

003920652 2840 SUPPORT,OIL TUBE 3 C CSI-Navy 03 C FEP N 1 2 3 4026T24P01 99207 General Electric Company DBA Ge

004005723 5340 CLAMP,LOOP 1 G no 2 CAA N 2 2 3 3015T10P03 03350 General Electric Company DBA Ge 2 5 3015T10P03 83930 Transdigm Inc DBA Adel Wiggins

004119965 6150 CABLE ASSEMBLY,SPEC 1 B CSI-Navy 03 C FCA N N 3 2 3 64929 59501 Unison Industries, Llc 2 3 64929 81482 Page Chester, Ltd. DBA Cooperative 2 5 5015T85P01 99207 General Electric Company DBA Ge

004276095 5310 NUT,SELF-LOCKING,AS 1 B no 2 CAA N 1 2 3 3017T56P01 56878 Sps Technologies, Llc DBA

004392488 5365 BUSHING,MACHINE THR 1 G no 1 DBA N Y 1 2 3 2007T31P01 99207 General Electric Company DBA Ge

004534918 4320 GEAR ROTOR SET,ROTARY PUMP 3 Q no 2 FCA N N 1 2 3 24-45600-0088-1 86329 Parker-Hannifin Corporation DBA

004534919 5365 RING,PUMP,ROTARY 3 P no 2 DAB N 1 2 3 25-45644-0017-1 86329 Parker-Hannifin Corporation DBA

004614349 5340 CLAMP,LOOP 1 C no 2 CAA N 2 2 3 3015T10P01 03350 General Electric Company DBA Ge 2 5 3015T10P01 04602 B-C-D Metal Products, Inc.

004629532 2840 SUPPORT,BEARING 3 C CSI-Navy 03 C LCP Y Y 2 2 3 5014T39G01 99207 General Electric Company DBA Ge 2 5 5014T39G01 03350 General Electric Company DBA Ge

004656339 2925 LEAD,IGNITION,ENGIN 1 B no 2 FCB N 2 2 3 64876 81482 Page Chester, Ltd. DBA Cooperative 2 5 64876 59501 Unison Industries, Llc

004814208 6150 LEAD AND CONDUIT AS 1 B no 2 DAB N N 2 2 3 64877/710128 59501 Unison Industries, Llc 2 5 64877 81482 Page Chester, Ltd. DBA Cooperative

004821865 2840 SHROUD SECTOR 1 C no C LCP Y 2 2 3 4014T01G08 99207 General Electric Company DBA Ge 2 5 4014T01G08 50554 Metro Machine Works, Inc.

004821945 2840 SHROUD SECTOR 1 C no 1 LCJ Y 3 2 3 4014T22G07 99207 General Electric Company DBA Ge 2 5 4014T22G07 01993 Ferrotherm Corporation 2 5 4014T22G07 50554 Metro Machine Works, Inc.

004821961 2840 SHROUD SECTOR 1 C no C LCJ Y 3 2 3 4014T22G08 99207 General Electric Company DBA Ge 2 5 4014T22G08 01993 Ferrotherm Corporation 2 5 4014T22G08 03350 General Electric Company DBA Ge

004876369 5306 BOLT,SHOULDER 1 C no 2 CAA N 5 2 3 3011T71P02 99207 General Electric Company DBA Ge 2 5 3011T71P02 06710 Valley-Todeco, Inc. DBA Arconic 2 5 3011T71P02 0UCY9 M.S. Aerospace Inc. 2 5 3011T71P02 23899 J.W. Manufacturing, Inc DBA 2 5 3011T71P02 92215 Arconic Global Fasteners Rings, 004891651 2840 SHROUD-SECTOR,TURBI 1 C no C LCP Y 4 2 3 4014T01G07 99207 General Electric Company DBA Ge 2 5 4014T01G07 01993 Ferrotherm Corporation 2 5 4014T01G07 03350 General Electric Company DBA Ge 2 5 4014T01G07 50554 Metro Machine Works, Inc.

004891652 2840 SHROUD SEGMENT,TURB 1 C no C LCP Y 3 2 3 4014T22G05 99207 General Electric Company DBA Ge 2 5 4014T22G05 01993 Ferrotherm Corporation 2 5 4014T22G05 03350 General Electric Company DBA Ge

004891653 2840 SHROUD-SECTOR,TURBI 3 C no 2 FCB N 1 2 3 4014T03G07 99207 General Electric Company DBA Ge

004891654 2840 SHROUD-SECTOR,TURBI 3 C no 2 FCB N 1 2 3 4014T04G05 99207 General Electric Company DBA Ge

004911347 2840 CONNECTOR TUBE 3 C CSI-Navy 03 C FGP N 1 2 3 4900T45P01 99207 General Electric Company DBA Ge

005739981 2840 SEAL,AIR,AIRCRAFT G 1 C no 2 FCB N 2 2 3 3011T65P01 99207 General Electric Company DBA Ge 2 5 3011T65P01 66841 Preci-Manufacturing, Incorporated

005739986 2840 FLANGED PIN,CASING 1 C no C RCA Y Y 2 2 3 3008T80P01 99207 General Electric Company DBA Ge 2 5 3008T80P01 34550 Khs Corp

005862869 5360 SPRING,HELICAL,COMP 3 D no 2 CAA N 1 2 3 2004T01P01 99207 General Electric Company DBA Ge

006803147 5325 RING,RETAINING 3 C CSI-Navy 03 C DAC N 2 2 3 RR-300-S 80756 Spirolox, Inc. 2 5 RR-300-S 99207 General Electric Company DBA Ge

007240626 2840 GUARD ASSEMBLY 3 C no 2 FCB N 1 2 3 3015T43P02 99207 General Electric Company DBA Ge

007264429 2840 VANE,COMPRESSOR,AIR 3 C CSI-Navy 03 C FEP N 1 2 3 5005T09P02 99207 General Electric Company DBA Ge

007282791 5310 WASHER,KEY 1 G no C DAA N 3 2 3 2004T44P01 99207 General Electric Company DBA Ge 2 5 200T44P01 0BD73 Bcd Enterprises, Llc DBA 2 5 2004T44P01 98391 Arkwin Industries, Inc.

007282798 5310 WASHER,KEY 1 C no 2 CAA N 2 2 3 2004T57P01 03350 General Electric Company DBA Ge 2 5 2004T57P01 98391 Arkwin Industries, Inc.

007327663 2840 RING ASSY,CARBON 3 C CSI-Navy 03 C RCP Y Y 1 2 3 600628 75370 Kaydon Ring Seal, Inc. DBA Kaydon

007360793 2840 SEAL KIT,ACCESSORY 3 C CSI-Navy 03 C RCP Y Y 1 2 3 600595 75370 Kaydon Ring Seal, Inc. DBA Kaydon

007385178 2915 SLEEVE AND PISTON A 3 C no 2 FCA N N 1 2 3 5008T06G01 99207 General Electric Company DBA Ge

007385183 5360 SPRING,HELICAL,COMP 3 L no 2 FCA N 1 2 3 2004T40P01 99207 General Electric Company DBA Ge

007530360 5342 BRACKET,ANGLE,ENGIN 1 G no 2 DAB N 1 2 3 3014T95P01 99207 General Electric Company DBA Ge

007530362 5315 KEY,STATOR VANE 1 G no C DAA N 1 2 3 2004T63P01 99207 General Electric Company DBA Ge

007572840 3120 BUSHING,SLEEVE 1 C no 2 FCA N N 2 2 3 3010T43P02 99207 General Electric Company DBA Ge 2 5 3010T43P02 60402 Tri-Mack Plastics Manufacturing

007572843 5340 CLEVIS,ROD END 3 C CSI-Navy 03 C ECC N 1 2 3 4014T62P02 99207 General Electric Company DBA Ge

007572966 2840 DISK,TURBINE,AIRCRA 3 C CSI-Navy 03 C EGP N 2 2 3 5007T45P04 99207 General Electric Company DBA Ge 2 8 5007T45P02 D3309 Mtu Aero Engines Ag DBA Mtu

007572993 2840 DISK,TURBINE,AIRCRA 3 C CSI-Navy 03 C FEP N 3 2 3 5007T46P04 99207 General Electric Company DBA Ge 2 5 5007T46P02 99207 General Electric Company DBA Ge 2 8 5007T46P02 D3309 Mtu Aero Engines Ag DBA Mtu

007572994 5365 SPACER,COMPRESSOR 3 C CSI-Navy 03 C FEP N 2 2 3 4006T69P03 99207 General Electric Company DBA Ge 2 5 4006T69P02 99207 General Electric Company DBA Ge

007572995 2840 DISK,COMPRESSOR,AIR 3 C CSI-Navy 03 C FEP N 1 2 3 5004T41P04 99207 General Electric Company DBA Ge

007572996 2840 ROTOR SPOOL,COMPRES 3 C CSI-Navy 03 C FEP N 2 2 3 6003T84P04 99207 General Electric Company DBA Ge 2 5 6003T84P02 99207 General Electric Company DBA Ge

007572997 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FEP N 1 2 3 5007T34P06 99207 General Electric Company DBA Ge

007572998 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FEP N 1 2 3 5007T34P07 99207 General Electric Company DBA Ge

007572999 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C N 1 2 3 5007T34P08 99207 General Electric Company DBA Ge

007573000 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FEP N 1 2 3 5007T34P09 99207 General Electric Company DBA Ge

007573001 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C N 1 2 3 5007T34P10 99207 General Electric Company DBA Ge

007573005 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FEP N 1 2 3 5007T35P06 99207 General Electric Company DBA Ge

007573024 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FEP N 1 2 3 5007T35P07 99207 General Electric Company DBA Ge

007573039 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C N 1 2 3 5007T35P08 99207 General Electric Company DBA Ge

007573040 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FEP N 1 2 3 5007T35P09 99207 General Electric Company DBA Ge

007573046 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FEP N 1 2 3 5007T36P06 99207 General Electric Company DBA Ge

007573067 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C N 1 2 3 5007T36P07 99207 General Electric Company DBA Ge

007573070 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C N 1 2 3 5007T36P08 99207 General Electric Company DBA Ge

007573084 2840 BLADE,COMPRESSOR,AIRCRAFT 3 C CSI-Navy 03 C FCA N 1 2 3 5007T36P09 99207 General Electric Company DBA Ge

007573086 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C N 1 2 3 5007T36P10 99207 General Electric Company DBA Ge

007573088 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FEP N 1 2 3 5007T37P06 99207 General Electric Company DBA Ge

007573089 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FEP N 1 2 3 5007T37P07 99207 General Electric Company DBA Ge

007573090 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FEP N 1 2 3 5007T37P08 99207 General Electric Company DBA Ge

007573091 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C FCA N 1 2 3 5007T37P09 99207 General Electric Company DBA Ge

007573092 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C N 1 2 3 5007T37P10 99207 General Electric Company DBA Ge

007573093 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy 03 C N 1 2 3 5007T38P06 99207 General Electric Company DBA Ge

007573095 2840 BLADE,COMPRESSOR,AI 3 C CSI-Navy…