REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE2DP-27-T-0355

2. DATE ISSUED

2026 NOV 13

3. REQUISITION/PURCHASE REQUEST NO.

See Schedule

RATING

DLA TROOP SUPPORT

MEDICAL SUPPLY CHAIN PHARM FSA

700 ROBBINS AVENUE

PHILADELPHIA PA 19111

USA

Name: JAMES MARIANI Buyer Code:DJM0503 Tel: 445-737-8108 Email: JAMES.MARIANI@DLA.MIL

6. DELIVER BY (Date)

20 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 18

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-844-347-2457 (Press 5 then speak or enter D-L-A).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DEFENSE LOGISTICS AGENCY (DLA) MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS REVISION 106 (NOVEMBER 3, 2026) WHICH CAN BE FOUND ON THE WEB AT:

https://www.dla.mil/Portals/104/Documents/J7Acquisition/FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision11-3-26.pdf

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

THE FULL TEXT OF THE FAR, DFARS, AND DLAD PROVISIONS, CLAUSES, ANDPROCUREMENT NOTES CAN BE VIEWED AT THE FOLLOWING WEBSITES:

FAR: https://www.acquisition.gov, (this site is to be utilized for the FAR only; do not utilize for DFARS, DLAD, etc.)

DFARS: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLA Master Solicitation, Technical/Quality Requirements, Procurement Notes, and DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 48

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 48 PAGES

SPE2DP-27-T-0355

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 325412

Refer to the corresponding small business size standard http://www.sba.gov/content/table-small-business-size-standards

However, the small business size standard for a concern that submits an offer but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition is

1) an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award; or 2) uses the HUBZone price evaluation preference to award to a HUBZone concern, unless the concern waived the evaluation preference.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

DESTINATION INSPECTION REQUIRED - FAR 52.246-2 APPLIES.

Fast Pay applies to this solicitation if the final award value is less than or equal to the dollar threshold cited in FAR 13.402(a)

Due to the volatility of demands, and frequent quantity changes on open purchase requests, offerors are highly encouraged to submit quantity ranges when quoting. If a PR is evaluated manually, quoting ranges

PAGE 3 OF 48 PAGES

SPE2DP-27-T-0355

SECTION A

provides the buyer the option to combine requirements or reduce the quantity as needed without resoliciting or adding any additional administrative burden for either party involved when making an award.

This does not apply to Auto IDC.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

APEX Accelerators, formally known as the Procurement Technical

Assistance Program (PTAP), is designed to increase the number of

U.S. businesses capable of bidding and performing on local, state, and federal government contracts. APEX Accelerators provide critical assistance to new and existing businesses interested government contracting to enhance the defense industrial base at no cost. Visit https://www.apexaccelerators.us/#/ for more information.

6, THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT

PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE

GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS

SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR

52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING

REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –

REPRESENTATION.

Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other

PAGE 4 OF 48 PAGES

SPE2DP-27-T-0355

SECTION A

domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses

DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation.

DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph

(c) of FAR solicitation provision 52.212-3, Offeror Representations and

Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business

Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB

Program; or

(E) Historically underutilized business zone small business.

ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING

Within approximately 2 months, ALL DLA contractors will be required to register via DLA’s Account Management & Provisioning System (AMPS) to access VSM. Without AMPS approval, contractors will not be able to access VSM or ship to DLA.

Contractors using VSM WebServices MUST update their internal schema or lose access and shipping ability. Online VSM users do not need schema changes.

Required actions:

• Review VSM announcements. Schema updates are in the April 23, 2025

PAGE 5 OF 48 PAGES

SPE2DP-27-T-0355

SECTION A

post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259

• Additional notices:

https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229

AMPS registration is not available at this time; however, check DLA's

DIBBS "Notices" section daily for updates.

• To receive AMPS/User Guide updates via email, contact:

JSONWEBServiceInquiry@dla.mil

Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the

Engineering Support Activity (ESA) for acceptability for future procurements of the same items. See L31 Additive Manufacturing (JUN

2018)

Procurement History for NSN/FSC:012580960/6505

CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material

00E55 SPE2D927F0556 2.000 3.69000 20261112 N

00E55 SPE2D927F0505 2.000 3.69000 20261110 N

00E55 SPE2D927F0420 1.000 3.69000 20261107 N

00E55 SPE2D927F0224 16.000 3.69000 20261023 N

00E55 SPE2D927F0056 10.000 3.69000 20261008 N

00E55 SPE2D926F9403 1.000 3.69000 20260926 N

00E55 SPE2D926F9336 1.000 3.69000 20260924 N

00E55 SPE2D926F9300 1.000 3.69000 20260923 N

00E55 SPE2D926F9297 2.000 3.69000 20260923 N

00E55 SPE2D926F9228 4.000 3.69000 20260919 N

00E55 SPE2D926F9116 1.000 3.69000 20260914 N

00E55 SPE2D926F8997 6.000 3.69000 20260911 N

PAGE 6 OF 48 PAGES

SPE2DP-27-T-0355

SECTION A

Procurement History for NSN/FSC:012580960/6505

CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material

00E55 SPE2D926F8965 1.000 3.69000 20260911 N

00E55 SPE2D926F8817 1.000 3.69000 20260906 N

00E55 SPE2D926F8707 10.000 3.69000 20260903 N

00E55 SPE2D926F8540 2.000 3.69000 20260829 N

00E55 SPE2D926F8361 2.000 3.69000 20260825 N

00E55 SPE2D926F8244 2.000 3.69000 20260813 N

00E55 SPE2D926F8203 1.000 3.69000 20260813 N

00E55 SPE2D926F8207 1.000 3.69000 20260813 N

PAGE 7 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019116735

NSN/MATERIAL:6505012580960

ITEM DESCRIPTION

ALBUTEROL SULFATE INHALATION SOLUTION

ALBUTEROL SULFATE INHALATION SOLUTION,0.083%,

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

3 ML, UNIT DOSE, 25'S

NEPHRON PHARM. NDC00487-9501-25

STD AAC L; U/I "PG" (3X25)

FSSB EVE RETTANO 6/11/13

This device or drug is regulated by the FDA.

Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation.

Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

https://www.dla.mil/Logistics-Operations/Packaging/

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

1 PG = 25 EA

PAGE 8 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

RS012: Shelf-life requirement RS001 for a TYPE I (CODE J) item with a shelf life of 15 months (non-extendable) applies to this item.

NEPHRON PHARMACEUTICALS CORPORATION 0TU69 P/N NDC00487-9501-25

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 7019116735 0001 PG 2.000

NSN/MATERIAL:6505012580960

DELIVERY (IN DAYS):0020

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT

OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/

OFFICES/PACKAGING/PALLETIZATION_WPMNOTICE.ASP.

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

PAGE 9 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019116735 PRLI: 0001 CONT’D

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

https://www.dla.mil/Logistics-Operations/Packaging/

PACKAGING AND PACKING SHALL BE COMMERCIAL,

AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

CONTAINERS (EXPORT WHEN NECESSARY) WHICH

WILL INSURE ACCEPTANCE AND SAFE DELIVERY BY

COMMON OR OTHER CARRIER, AT THE LOWEST RATE,

TO POINT OF DELIVERY CALLED FOR IN THE

CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

MIL-STD-147. UNITIZED LOADS SHALL BE USED

WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE

DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY

PALLETS. PALLET SHALL HAVE A LENGTH OF 40

INCHES AND A WIDTH OF 48 INCHES. PALLET

LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED

54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND

52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF

LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT

BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE

ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54

INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT

BE ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER

FOR ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY

BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS

PAGE 10 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019116735 PRLI: 0001 CONT’D

SPECIFIED HEREIN AND IN THE APPLICABLE

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

LABELING AND MARKING. MATERIAL SHALL BE

LABELED AND MARKED IN ACCORDANCE WITH

COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN

AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.

MARKING ON EACH SHIPPING CONTAINER AND/OR

UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1 (MMS NO. 1) DATED 19

JULY 1999, EXCEPT BAR CODES ARE NOT REQUIRED.

AS AN ALTERNATE, MARKINGS ON EACH SHIPPING

CONTAINER SHALL INCLUDE THE MINIMUM MARKINGS

AS SPECIFIED HEREIN.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN

ACCORDANCE WITH ALL APPLICABLE REGULATORY

REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL

HANDLING, I.E., CONTROLLED, PERISHABLE AND

HAZARDOUS ITEMS.

AS AN ALTERNATE, FOR ALL ITEMS EXCEPT

PERISHABLE ITEMS AND HAZARDOUS MATERIAL,

REQUIRED MARKINGS MAY BE SUPPLIED ON THE

DD FORM 250 OR PACKING LIST ACCOMPANYING THE

SHIPMENT.

MIL-STD-147 IS AVAILABLE ONLINE AT

HTTPS://ASSIST.DAPS.DLA.MIL/QUICKSEARCH/.

MMS NO. 1 MAY BE OBTAINED BY CONTACTING

DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER

OPERATIONS, FSFB (PACKAGING), VIA

EMAIL: DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

HTTP://WWW.LANDANDMARITIME.DLA.MIL/

DOWNLOADS/PACKAGING/MMS1.PDF

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PRESERVATION, PACKAGING, PACKING, UNITIZATION,

LABELING, AND MARKING SHALL BE AS SPECIFIED IN

THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS

SPECIFIED IN-THE-CLEAR IN THE "ITEM

DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF

THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE

TO THE SECTION HEADED "PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER

THE HEADING "PREPARATION FOR DELIVERY", DELETE

THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

PAGE 11 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019116735 PRLI: 0001 CONT’D

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING

INSTRUCTION (SPI). SPI'S ARE NOT PREPARED FOR

MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND

SUBSTITUTE "MEDICAL MARKING STANDARD NO. 1".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL

SHIPMENTS OF PACKAGED MATERIEL TO THE

GOVERNMENT" AND ENDING WITH "THE SCHEDULE TAKES

PRECEDENCE." IN ITS ENTIRETY.

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

BULK BREAK POINT:

WK4F8Q

W6Y1 USALRCTR BAVARIA

AWCF SSF 405TH AFSB EUR

ROSE BARRACKS SOUTH CAMP BLDG 113

VILSECK 92249

DE

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE

C20 AND CONTRACT

FREIGHT SHIPPING ADDRESS:

WK4F8Q

W6Y1 USALRCTR BAVARIA

AWCF SSF 405TH AFSB EUR

ROSE BARRACKS SOUTH CAMP BLDG 113

VILSECK 92249

DE

MARKFOR

WK4F8Q

W6Y1 USALRCTR BAVARIA

AWCF SSF 405TH AFSB EUR

ROSE BARRACKS SOUTH CAMP BLDG 113

VILSECK 92249

DE

M/F: (TCN) WK4F8Q62720479

RDD: 283

PROJ: TP 3

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 12

DIC: A01 DIST: V ADV: 2A FC: Z9

Need Ship Date:00/00/0000 Original Required Delivery Date:11/16/2026

PAGE 12 OF 48 PAGES

SPE2DP-27-T-0355

PR: 7019116707 PRLI: 0001 CONT’D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0002 7019116707 0001 PG 3.000

NSN/MATERIAL:6505012580960

DELIVERY (IN DAYS):0020

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT

OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/

OFFICES/PACKAGING/PALLETIZATION_WPMNOTICE.ASP.

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

PAGE 13 OF 48 PAGES

SPE2DP-27-T-0355

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

https://www.dla.mil/Logistics-Operations/Packaging/

PACKAGING AND PACKING SHALL BE COMMERCIAL,

AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

CONTAINERS (EXPORT WHEN NECESSARY) WHICH

WILL INSURE ACCEPTANCE AND SAFE DELIVERY BY

COMMON OR OTHER CARRIER, AT THE LOWEST RATE,

TO POINT OF DELIVERY CALLED FOR IN THE

CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

MIL-STD-147. UNITIZED LOADS SHALL BE USED

WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE

DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY

PALLETS. PALLET SHALL HAVE A LENGTH OF 40

INCHES AND A WIDTH OF 48 INCHES. PALLET

LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED

54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND

52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF

LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT

BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE

ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54

INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT

BE ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER

FOR ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY

BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS

SPECIFIED HEREIN AND IN THE APPLICABLE

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

LABELING AND MARKING. MATERIAL SHALL BE

LABELED AND MARKED IN ACCORDANCE WITH

COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN

AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.

MARKING ON EACH SHIPPING CONTAINER AND/OR

UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1 (MMS NO. 1) DATED 19

PAGE 14 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019116707 PRLI: 0001 CONT’D

JULY 1999, EXCEPT BAR CODES ARE NOT REQUIRED.

AS AN ALTERNATE, MARKINGS ON EACH SHIPPING

CONTAINER SHALL INCLUDE THE MINIMUM MARKINGS

AS SPECIFIED HEREIN.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN

ACCORDANCE WITH ALL APPLICABLE REGULATORY

REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL

HANDLING, I.E., CONTROLLED, PERISHABLE AND

HAZARDOUS ITEMS.

AS AN ALTERNATE, FOR ALL ITEMS EXCEPT

PERISHABLE ITEMS AND HAZARDOUS MATERIAL,

REQUIRED MARKINGS MAY BE SUPPLIED ON THE

DD FORM 250 OR PACKING LIST ACCOMPANYING THE

SHIPMENT.

MIL-STD-147 IS AVAILABLE ONLINE AT

HTTPS://ASSIST.DAPS.DLA.MIL/QUICKSEARCH/.

MMS NO. 1 MAY BE OBTAINED BY CONTACTING

DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER

OPERATIONS, FSFB (PACKAGING), VIA

EMAIL: DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PRESERVATION, PACKAGING, PACKING, UNITIZATION,

LABELING, AND MARKING SHALL BE AS SPECIFIED IN

THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS

SPECIFIED IN-THE-CLEAR IN THE "ITEM

DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF

THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE

TO THE SECTION HEADED "PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER

THE HEADING "PREPARATION FOR DELIVERY", DELETE

THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING

INSTRUCTION (SPI). SPI'S ARE NOT PREPARED FOR

MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND

SUBSTITUTE "MEDICAL MARKING STANDARD NO. 1".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL

SHIPMENTS OF PACKAGED MATERIEL TO THE

PAGE 15 OF 48 PAGES

SPE2DP-27-T-0355

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT

OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/

OFFICES/PACKAGING/PALLETIZATION_WPMNOTICE.ASP.

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

https://www.dla.mil/Logistics-Operations/Packaging/

PACKAGING AND PACKING SHALL BE COMMERCIAL,

AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

CONTAINERS (EXPORT WHEN NECESSARY) WHICH

WILL INSURE ACCEPTANCE AND SAFE DELIVERY BY

COMMON OR OTHER CARRIER, AT THE LOWEST RATE,

TO POINT OF DELIVERY CALLED FOR IN THE

CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

MIL-STD-147. UNITIZED LOADS SHALL BE USED

WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE

DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE

PAGE 16 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019116707 PRLI: 0001 CONT’D

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY

PALLETS. PALLET SHALL HAVE A LENGTH OF 40

INCHES AND A WIDTH OF 48 INCHES. PALLET

LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED

54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND

52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF

LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT

BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE

ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54

INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT

BE ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER

FOR ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY

BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS

SPECIFIED HEREIN AND IN THE APPLICABLE

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

LABELING AND MARKING. MATERIAL SHALL BE

LABELED AND MARKED IN ACCORDANCE WITH

COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN

AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.

MARKING ON EACH SHIPPING CONTAINER AND/OR

UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1 (MMS NO. 1) DATED 19

JULY 1999, EXCEPT BAR CODES ARE NOT REQUIRED.

AS AN ALTERNATE, MARKINGS ON EACH SHIPPING

CONTAINER SHALL INCLUDE THE MINIMUM MARKINGS

AS SPECIFIED HEREIN.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN

ACCORDANCE WITH ALL APPLICABLE REGULATORY

REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL

HANDLING, I.E., CONTROLLED, PERISHABLE AND

HAZARDOUS ITEMS.

AS AN ALTERNATE, FOR ALL ITEMS EXCEPT

PERISHABLE ITEMS AND HAZARDOUS MATERIAL,

REQUIRED MARKINGS MAY BE SUPPLIED ON THE

DD FORM 250 OR PACKING LIST ACCOMPANYING THE

SHIPMENT.

MIL-STD-147 IS AVAILABLE ONLINE AT

HTTPS://ASSIST.DAPS.DLA.MIL/QUICKSEARCH/.

MMS NO. 1 MAY BE OBTAINED BY CONTACTING

DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER

OPERATIONS, FSFB (PACKAGING), VIA

EMAIL: DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

PAGE 17 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PRESERVATION, PACKAGING, PACKING, UNITIZATION,

LABELING, AND MARKING SHALL BE AS SPECIFIED IN

THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS

SPECIFIED IN-THE-CLEAR IN THE "ITEM

DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF

THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE

TO THE SECTION HEADED "PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER

THE HEADING "PREPARATION FOR DELIVERY", DELETE

THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING

INSTRUCTION (SPI). SPI'S ARE NOT PREPARED FOR

MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND

SUBSTITUTE "MEDICAL MARKING STANDARD NO. 1".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL

SHIPMENTS OF PACKAGED MATERIEL TO THE

W33RBS

0087 CS BN CO A COMPOSITE

AWCF SSF

BLDG 1509 WEST 6TH STREET

FORT STEWART GA 31314-5185

US

SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.

FREIGHT SHIPPING ADDRESS:

W33RBS

0087 CS BN CO A COMPOSITE

AWCF SSF

BLDG 1509 WEST 6TH STREET

FORT STEWART GA 31314-5185

PAGE 18 OF 48 PAGES

SPE2DP-27-T-0355

MARKFOR

W33RBS

0087 CS BN CO A COMPOSITE

AWCF SSF

BLDG 1509 WEST 6TH STREET

FORT STEWART GA 31314-5185

US

M/F: (TCN) W33RBS63020293

RDD: 316

PROJ: TP 3

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 12

DIC: A0A DIST: V ADV: 2A FC: Z9

Need Ship Date:00/00/0000

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0003 7019117157 0001 PG 2.000

NSN/MATERIAL:6505012580960

DELIVERY (IN DAYS):0020

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT

OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

PAGE 19 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019117157 PRLI: 0001 CONT’D

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/

OFFICES/PACKAGING/PALLETIZATION_WPMNOTICE.ASP.

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

https://www.dla.mil/Logistics-Operations/Packaging/

PACKAGING AND PACKING SHALL BE COMMERCIAL,

AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

CONTAINERS (EXPORT WHEN NECESSARY) WHICH

WILL INSURE ACCEPTANCE AND SAFE DELIVERY BY

COMMON OR OTHER CARRIER, AT THE LOWEST RATE,

TO POINT OF DELIVERY CALLED FOR IN THE

CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

MIL-STD-147. UNITIZED LOADS SHALL BE USED

WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE

DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY

PALLETS. PALLET SHALL HAVE A LENGTH OF 40

INCHES AND A WIDTH OF 48 INCHES. PALLET

LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED

54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND

52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF

LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT

BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE

ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54

INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT

BE ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

PAGE 20 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019117157 PRLI: 0001 CONT’D

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER

FOR ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY

BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS

SPECIFIED HEREIN AND IN THE APPLICABLE

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

LABELING AND MARKING. MATERIAL SHALL BE

LABELED AND MARKED IN ACCORDANCE WITH

COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN

AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.

MARKING ON EACH SHIPPING CONTAINER AND/OR

UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1 (MMS NO. 1) DATED 19

JULY 1999, EXCEPT BAR CODES ARE NOT REQUIRED.

AS AN ALTERNATE, MARKINGS ON EACH SHIPPING

CONTAINER SHALL INCLUDE THE MINIMUM MARKINGS

AS SPECIFIED HEREIN.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN

ACCORDANCE WITH ALL APPLICABLE REGULATORY

REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL

HANDLING, I.E., CONTROLLED, PERISHABLE AND

HAZARDOUS ITEMS.

AS AN ALTERNATE, FOR ALL ITEMS EXCEPT

PERISHABLE ITEMS AND HAZARDOUS MATERIAL,

REQUIRED MARKINGS MAY BE SUPPLIED ON THE

DD FORM 250 OR PACKING LIST ACCOMPANYING THE

SHIPMENT.

MIL-STD-147 IS AVAILABLE ONLINE AT

HTTPS://ASSIST.DAPS.DLA.MIL/QUICKSEARCH/.

MMS NO. 1 MAY BE OBTAINED BY CONTACTING

DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER

OPERATIONS, FSFB (PACKAGING), VIA

EMAIL: DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PRESERVATION, PACKAGING, PACKING, UNITIZATION,

LABELING, AND MARKING SHALL BE AS SPECIFIED IN

THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS

SPECIFIED IN-THE-CLEAR IN THE "ITEM

DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF

THE ACQUISITION.

PAGE 21 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019117157 PRLI: 0001 CONT’D

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE

TO THE SECTION HEADED "PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER

THE HEADING "PREPARATION FOR DELIVERY", DELETE

THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING

INSTRUCTION (SPI). SPI'S ARE NOT PREPARED FOR

MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND

SUBSTITUTE "MEDICAL MARKING STANDARD NO. 1".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL

SHIPMENTS OF PACKAGED MATERIEL TO THE

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT

OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/

OFFICES/PACKAGING/PALLETIZATION_WPMNOTICE.ASP.

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

PAGE 22 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019117157 PRLI: 0001 CONT’D

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

https://www.dla.mil/Logistics-Operations/Packaging/

PACKAGING AND PACKING SHALL BE COMMERCIAL,

AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

CONTAINERS (EXPORT WHEN NECESSARY) WHICH

WILL INSURE ACCEPTANCE AND SAFE DELIVERY BY

COMMON OR OTHER CARRIER, AT THE LOWEST RATE,

TO POINT OF DELIVERY CALLED FOR IN THE

CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

MIL-STD-147. UNITIZED LOADS SHALL BE USED

WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE

DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY

PALLETS. PALLET SHALL HAVE A LENGTH OF 40

INCHES AND A WIDTH OF 48 INCHES. PALLET

LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED

54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND

52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF

LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT

BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE

ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54

INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT

BE ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER

FOR ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY

BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS

SPECIFIED HEREIN AND IN THE APPLICABLE

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

LABELING AND MARKING. MATERIAL SHALL BE

LABELED AND MARKED IN ACCORDANCE WITH

COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN

AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.

MARKING ON EACH SHIPPING CONTAINER AND/OR

UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1 (MMS NO. 1) DATED 19

JULY 1999, EXCEPT BAR CODES ARE NOT REQUIRED.

PAGE 23 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019117157 PRLI: 0001 CONT’D

AS AN ALTERNATE, MARKINGS ON EACH SHIPPING

CONTAINER SHALL INCLUDE THE MINIMUM MARKINGS

AS SPECIFIED HEREIN.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN

ACCORDANCE WITH ALL APPLICABLE REGULATORY

REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL

HANDLING, I.E., CONTROLLED, PERISHABLE AND

HAZARDOUS ITEMS.

AS AN ALTERNATE, FOR ALL ITEMS EXCEPT

PERISHABLE ITEMS AND HAZARDOUS MATERIAL,

REQUIRED MARKINGS MAY BE SUPPLIED ON THE

DD FORM 250 OR PACKING LIST ACCOMPANYING THE

SHIPMENT.

MIL-STD-147 IS AVAILABLE ONLINE AT

HTTPS://ASSIST.DAPS.DLA.MIL/QUICKSEARCH/.

MMS NO. 1 MAY BE OBTAINED BY CONTACTING

DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER

OPERATIONS, FSFB (PACKAGING), VIA

EMAIL: DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PRESERVATION, PACKAGING, PACKING, UNITIZATION,

LABELING, AND MARKING SHALL BE AS SPECIFIED IN

THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS

SPECIFIED IN-THE-CLEAR IN THE "ITEM

DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF

THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE

TO THE SECTION HEADED "PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER

THE HEADING "PREPARATION FOR DELIVERY", DELETE

THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING

INSTRUCTION (SPI). SPI'S ARE NOT PREPARED FOR

MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND

SUBSTITUTE "MEDICAL MARKING STANDARD NO. 1".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL

SHIPMENTS OF PACKAGED MATERIEL TO THE

PAGE 24 OF 48 PAGES

SPE2DP-27-T-0355

PR: 7019117157 PRLI: 0001 CONT’D

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT

OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/

OFFICES/PACKAGING/PALLETIZATION_WPMNOTICE.ASP.

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

https://www.dla.mil/Logistics-Operations/Packaging/

PACKAGING AND PACKING SHALL BE COMMERCIAL,

AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

CONTAINERS (EXPORT WHEN NECESSARY) WHICH

WILL INSURE ACCEPTANCE AND SAFE DELIVERY BY

COMMON OR OTHER CARRIER, AT THE LOWEST RATE,

TO POINT OF DELIVERY CALLED FOR IN THE

CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

MIL-STD-147. UNITIZED LOADS SHALL BE USED

WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE

DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY

PAGE 25 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019117157 PRLI: 0001 CONT’D

PALLETS. PALLET SHALL HAVE A LENGTH OF 40

INCHES AND A WIDTH OF 48 INCHES. PALLET

LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED

54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND

52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF

LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT

BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE

ITEM (EQUIPMENT ITEM AND PALLET) EXCEEDS 54

INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT

BE ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER

FOR ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY

BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS

SPECIFIED HEREIN AND IN THE APPLICABLE

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

LABELING AND MARKING. MATERIAL SHALL BE

LABELED AND MARKED IN ACCORDANCE WITH

COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN

AND GOVERNMENT QUANTITY AND UNIT OF ISSUE.

MARKING ON EACH SHIPPING CONTAINER AND/OR

UNITIZED LOAD SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1 (MMS NO. 1) DATED 19

JULY 1999, EXCEPT BAR CODES ARE NOT REQUIRED.

AS AN ALTERNATE, MARKINGS ON EACH SHIPPING

CONTAINER SHALL INCLUDE THE MINIMUM MARKINGS

AS SPECIFIED HEREIN.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN

ACCORDANCE WITH ALL APPLICABLE REGULATORY

REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL

HANDLING, I.E., CONTROLLED, PERISHABLE AND

HAZARDOUS ITEMS.

AS AN ALTERNATE, FOR ALL ITEMS EXCEPT

PERISHABLE ITEMS AND HAZARDOUS MATERIAL,

REQUIRED MARKINGS MAY BE SUPPLIED ON THE

DD FORM 250 OR PACKING LIST ACCOMPANYING THE

SHIPMENT.

MIL-STD-147 IS AVAILABLE ONLINE AT

HTTPS://ASSIST.DAPS.DLA.MIL/QUICKSEARCH/.

MMS NO. 1 MAY BE OBTAINED BY CONTACTING

DLA TROOP SUPPORT, ATTN: MEDICAL SUPPLIER

OPERATIONS, FSFB (PACKAGING), VIA

EMAIL: DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

PAGE 26 OF 48 PAGES

SPE2DP-27-T-0355

PR: 7019117157 PRLI: 0001 CONT’D

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PRESERVATION, PACKAGING, PACKING, UNITIZATION,

LABELING, AND MARKING SHALL BE AS SPECIFIED IN

THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS

SPECIFIED IN-THE-CLEAR IN THE "ITEM

DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF

THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE

TO THE SECTION HEADED "PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER

THE HEADING "PREPARATION FOR DELIVERY", DELETE

THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING

INSTRUCTION (SPI). SPI'S ARE NOT PREPARED FOR

MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND

SUBSTITUTE "MEDICAL MARKING STANDARD NO. 1".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL

SHIPMENTS OF PACKAGED MATERIEL TO THE

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

PAGE 27 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019117157 PRLI: 0001 CONT’D

MARKFOR

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

M/F: (TCN) W50YEF62990217

RDD: 311

PROJ: TP 3

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 12

DIC: A0A DIST: V ADV: 2A FC: Z9

Need Ship Date:00/00/0000

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0004 7019116798 0001 PG 2.000

NSN/MATERIAL:6505012580960

DELIVERY (IN DAYS):0020

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT

OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

PAGE 28 OF 48 PAGES

SPE2DP-27-T-0355

SECTION B

PR: 7019116798 PRLI: 0001 CONT’D

REQUIRE…