SPE2DP27T0118.pdf

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE2DP-27-T-0118

2. DATE ISSUED

2026 OCT 16

3. REQUISITION/PURCHASE REQUEST NO.

See Schedule

RATING

DLA TROOP SUPPORT

MEDICAL SUPPLY CHAIN PHARM FSA

700 ROBBINS AVENUE

PHILADELPHIA PA 19111

USA

Name: Patrell Postell Buyer Code:DPP0028 Tel: DSN444-8334 Email: Patrell.Postell@dla.mil

6. DELIVER BY (Date)

5 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 OCT 21

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-844-347-2457 (Press 5 then speak or enter D-L-A).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DEFENSE LOGISTICS AGENCY (DLA) MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS REVISION 105 (MAY 20, 2026) WHICH CAN BE FOUND ON THE WEB AT:

https://www.dla.mil/Portals/104/Documents/J7Acquisition/FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision5-20-26.pdf

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

THE FULL TEXT OF THE FAR, DFARS, AND DLAD PROVISIONS, CLAUSES, ANDPROCUREMENT NOTES CAN BE VIEWED AT THE FOLLOWING WEBSITES:

FAR: https://www.acquisition.gov, (this site is to be utilized for the FAR only; do not utilize for DFARS, DLAD, etc.)

DFARS: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLA Master Solicitation, Technical/Quality Requirements, Procurement Notes, and DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 64

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 64 PAGES

SPE2DP-27-T-0118

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 325412

Refer to the corresponding small business size standard http://www.sba.gov/content/table-small-business-size-standards

However, the small business size standard for a concern that submits an offer but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition is

1) an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award; or 2) uses the HUBZone price evaluation preference to award to a HUBZone concern, unless the concern waived the evaluation preference.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

DESTINATION INSPECTION REQUIRED - FAR 52.246-2 APPLIES.

Fast Pay applies to this solicitation if the final award value is less than or equal to the dollar threshold cited in FAR 13.402(a)

Due to the volatility of demands, and frequent quantity changes on open purchase requests, offerors are highly encouraged to submit quantity ranges when quoting. If a PR is evaluated manually, quoting ranges

PAGE 3 OF 64 PAGES

SPE2DP-27-T-0118

SECTION A

provides the buyer the option to combine requirements or reduce the quantity as needed without resoliciting or adding any additional administrative burden for either party involved when making an award.

This does not apply to Auto IDC.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

APEX Accelerators, formally known as the Procurement Technical

Assistance Program (PTAP), is designed to increase the number of

U.S. businesses capable of bidding and performing on local, state, and federal government contracts. APEX Accelerators provide critical assistance to new and existing businesses interested government contracting to enhance the defense industrial base at no cost. Visit https://www.apexaccelerators.us/#/ for more information.

6, THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT

PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE

GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS

SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR

52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING

REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –

REPRESENTATION.

Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other

PAGE 4 OF 64 PAGES

SPE2DP-27-T-0118

SECTION A

domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses

DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation.

DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph

(c) of FAR solicitation provision 52.212-3, Offeror Representations and

Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business

Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB

Program; or

(E) Historically underutilized business zone small business.

ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING

Within approximately 2 months, ALL DLA contractors will be required to register via DLA’s Account Management & Provisioning System (AMPS) to access VSM. Without AMPS approval, contractors will not be able to access VSM or ship to DLA.

Contractors using VSM WebServices MUST update their internal schema or lose access and shipping ability. Online VSM users do not need schema changes.

Required actions:

• Review VSM announcements. Schema updates are in the April 23, 2025

PAGE 5 OF 64 PAGES

SPE2DP-27-T-0118

SECTION A

post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259

• Additional notices:

https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229

AMPS registration is not available at this time; however, check DLA's

DIBBS "Notices" section daily for updates.

• To receive AMPS/User Guide updates via email, contact:

JSONWEBServiceInquiry@dla.mil

Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the

Engineering Support Activity (ESA) for acceptability for future procurements of the same items. See L31 Additive Manufacturing (JUN

2018)

Procurement History for NSN/FSC:001538480/6505

CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material

3W8H0 SPE2DP26V0922 5.000 2.54000 20260908 N

3W8H0 SPE2DP26V0901 2.000 2.54000 20260827 N

3W8H0 SPE2DP26V0868 2.000 2.54000 20260810 N

3W8H0 SPE2DP26V0845 1.000 2.54000 20260728 N

3W8H0 SPE2DP26V0815 6.000 2.44000 20260706 N

3W8H0 SPE2DP26V0768 2.000 2.54000 20260608 N

3W8H0 SPE2DP26V0738 7.000 2.44000 20260521 N

3W8H0 SPE2DP26V0705 2.000 2.54000 20260512 N

3W8H0 SPE2DP26V0701 10.000 2.44000 20260506 N

3W8H0 SPE2DP26V0691 8.000 2.44000 20260505 N

3W8H0 SPE2DP26V0649 15.000 2.33000 20260424 N

3W8H0 SPE2DP26V0621 3.000 2.54000 20260414 N

PAGE 6 OF 64 PAGES

SPE2DP-27-T-0118

SECTION A

Procurement History for NSN/FSC:001538480/6505

CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material

3W8H0 SPE2DP26V0617 23.000 2.12000 20260413 N

3W8H0 SPE2DP26V0587 5.000 2.54000 20260401 N

3W8H0 SPE2DP26V0532 8.000 2.54000 20260317 N

3W8H0 SPE2DP26V0330 23.000 2.12000 20260120 N

1WAS9 SPE2DP26P0287 63.000 1.85000 20260114 N

3W8H0 SPE2DP26V0244 16.000 2.25000 20251215 N

3W8H0 SPE2DP26V0129 5.000 2.69000 20251029 N

3W8H0 SPE2DP26V0113 48.000 2.00000 20251028 N

PAGE 7 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7015762252

NSN/MATERIAL:6505001538480

ITEM DESCRIPTION

HYDROGEN PEROXIDE T

HYDROGEN PEROXIDE TOPICAL SOLUTION<(>,<)> USP. OVER THE COUNTER (OTC).

ROUTE OF ADMINISTRATION: TOPICAL. FOR EXTERNAL USE ONLY. DO NOT USE IN

EYES OR APPLY OVER LARGE AREAS OF THE BODY. DO NOT USE LONGER THAN 1

WEEK. CONTAINS 3% HYDROGEN PEROXIDE (STABILIZED) AS THE ACTIVE

INGREDIENT. UNIT OF ISSUE IS A BOTTLE CONTAINING 473 MILLILITERS (16

FLUID OUNCES OR 1 PINT). KEEP TIGHTLY CLOSED AND AT CONTROLLED ROOM

TEMPERATURE. DO NOT SHAKE BOTTLE. HOLD AWAY FROM FACE WHEN OPENING.

PROTECT FROM FREEZING AND AVOID EXCESSIVE HEAT.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

This device or drug is regulated by the FDA.

Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation.

Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE

HAZARDOUS MATERIALS REQUIREMENTS.

MATERIAL SAFETY DATA SHEET (MSDS).

. A CURRENT MSDS SHALL BE PROVIDED FOR THIS

ITEM. DLA'S DOD HMIRS FOCAL POINT (VBA) HAS

ESTABLISHED AN ELECTRONIC MAILBOX TO WHICH

ONE CAN TRANSMIT THE MSDS, TOGETHER WITH THE

COVER SHEET (P-75) WHOSE CONTENTS ARE TO

REFLECT LOGISTICS INFORMATION PROPER TO THE

MSDS ASSOCIATED WITH THE AWARDED CONTRACT AND

NSN. THE ELECTRONIC MAILBOX ADDRESS IS

DLA.MSDS@DLA.MIL.

. IN ADDITION, A COPY OF THE MSDS SHALL

ACCOMPANY EACH SHIPMENT OF THIS ITEM.

PACKAGING.

. PACKAGING FOR HAZARDOUS MATERIALS SHALL

COMPLY WITH APPLICABLE REGULATIONS, I.E.,

49 CFR, INTERNATIONAL CIVIL AVIATION

PAGE 8 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

ORGANIZATION (ICAO) TECHNICAL INSTRUCTIONS,

EXCLUDING PARA. 1.4 OF CHAPTERS 1 AND 3), AND

INTERNATIONAL MARITIME DANGEROUS GOODS CODE

(IMDG). BOTH ICAO AND IMDG COMPLY WITH UNITED

NATIONS RECOMMENDATIONS ON TRANSPORT OF

DANGEROUS GOODS.

. WHEN A CONTRACT/ORDER FOR HAZARDOUS MATERIAL

REQUIRES SHIPMENT THROUGH A MILITARY AERIAL PORT

FOR SHIPMENT VIA MILITARY AIRCRAFT, PACKAGING

SHALL ALSO COMPLY WITH DLAI 4145.3, PREPARING

HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING.

. ALL INTERIOR AND EXTERIOR CONTAINERS SHALL BE

LABELED AND MARKED AS SPECIFIED IN THE

REFERENCED PRODUCT SPECIFICATION, AND/OR AS

SPECIFIED IN SECTION C OF THE CONTRACT OR ORDER.

IN ADDITION, ALL LABELING AND MARKING SHALL

COMPLY WITH THE REQUIREMENTS OF 49 CFR, 29 CFR,

MEDICAL MARKING STANDARD NO. 1, AND EITHER ICAO

TECHNICAL INSTRUCTIONS OR IMDG ANNEX 1.

. WHEN A CONTRACT/ORDER FOR HAZARDOUS MATERIAL

REQUIRES SHIPMENT THROUGH A MILITARY AERIAL PORT

FOR SHIPMENT VIA MILITARY AIRCRAFT, MARKING

SHALL ALSO COMPLY WITH DLAI 4145.3.

. EACH AIR SHIPMENT OF HAZARDOUS

MATERIAL SHALL BE ACCOMPANIED BY A PROPERLY

COMPLETED COMMERCIALLY-AVAILABLE "SHIPPER'S

DECLARATION FOR DANGEROUS GOODS".

CERTIFICATION.

. ALL PACKAGING PERFORMANCE TEST REQUIREMENTS

SHALL BE SUPPORTED BY CERTIFICATES AND REPORTS

ATTESTING TO DATE OF TESTING AND DATA RESULTS

OBTAINED FROM TESTING.

. THE CONTRACTOR'S SIGNED CERTIFICATION THAT

PACKAGE CONFIGURATION MEETS 49 CFR, AND EITHER

ICAO OR IMDG REQUIREMENTS, SHALL BE INCLUDED ON

THE DD FORM 250 (MATERIAL INSPECTION AND

RECEIVING REPORT) OR ANY SUITABLE ALTERNATE

COMMERCIAL PACKING LIST.

. ALL CERTIFICATES/REPORTS SHALL BE AVAILABLE

FOR INSPECTION BY AUTHORIZED U.S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM DATE OF SHIPMENT.

SHALL BE MARKED IAW THE LATEST EDITION OF

THE MEDICAL MARKING STANDARD NO. 1.

MMS NO. 1 IS AVAILABLE ONLINE AT:

https://www.dla.mil/Logistics-Operations/Packaging/ RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.

MCKESSON MEDICAL-SURGICAL GOVERNMENT 1EU19 P/N 142779

MCKESSON MEDICAL-SURGICAL GOVERNMENT 1EU19 P/N 23-D0012

MEDLINE INDUSTRIES, LP 0PMN3 P/N MDS098001H

CARDINAL HEALTH 200, LLC 07TA6 P/N NDC3720-50871-43

MEDLINE INDUSTRIES, LP 0PMN3 P/N NDC53329-0981-06

MCKESSON MEDICAL-SURGICAL GOVERNMENT 1EU19 P/N NDC68599-2301-06

PAGE 9 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7015762252 PRLI: 0001 CONT’D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 7015762252 0001 BT 1.000

NSN/MATERIAL:6505001538480

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PARCEL POST ADDRESS:

N10546

USNS HOWARD O LORENZEN - T-AGM 25

UNIT 100468 BOX 1

FPO AP 96671

US

RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC

NOTE C20 AND CONTRACT

FREIGHT SHIPPING ADDRESS:

N10546

USNS HOWARD O LORENZEN - T-AGM 25

DLA VENDORS: USE VSM FOR

US

M/F: (TCN) N105466061S311

RDD: 777

PAGE 10 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7015762252 PRLI: 0001 CONT’D

PROJ: HP5 TP 2

SUPP ADD: YCABIN SIG: A

FOR GOVERNMENT USE ONLY: (IPD) 07

DIC: A41 DIST: 9B ADV: 2A FC: E5

Need Ship Date:00/00/0000 Original Required Delivery Date:03/06/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0002 7018194859 0001 BT 1.000

NSN/MATERIAL:6505001538480

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

PAGE 11 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7018194859 PRLI: 0001 CONT’D

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

https://www.dla.mil/Logistics-Operations/Packaging/

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

BULK BREAK POINT:

W50YF2

0051 MD CO MEDICAL LOGISTI

AWCF SSF

BLD A5474 PRATT ST

FORT BRAGG NC 28310

SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.

FREIGHT SHIPPING ADDRESS:

W50YF2

0051 MD CO MEDICAL LOGISTI

AWCF SSF

BLD A5474 PRATT ST

FORT BRAGG NC 28310

US

MARKFOR

W50YF2

0051 MD CO MEDICAL LOGISTI

AWCF SSF

BLD A5474 PRATT ST

FORT BRAGG NC 28310

US

M/F: (TCN) W50YF262450050

RDD:

PROJ: TP 1

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 02

DIC: A0A DIST: V ADV: 2A FC: Z9

PAGE 12 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7018194859 PRLI: 0001 CONT’D

Need Ship Date:00/00/0000 Original Required Delivery Date:09/09/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0003 7016884583 0001 BT 1.000

NSN/MATERIAL:6505001538480

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

PAGE 13 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7016884583 PRLI: 0001 CONT’D

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

W51JBY

0103 FA BN 01 HHS FIELD ARTIL

2841 SOUTH COUNTY TRAIL

BLDG 235

EAST GREENWICH RI 02818-0000

SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.

PAGE 14 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7016884583 PRLI: 0001 CONT’D

FREIGHT SHIPPING ADDRESS:

W51JBY

0103 FA BN 01 HHS FIELD ARTIL

2841 SOUTH COUNTY TRAIL

BLDG 235

EAST GREENWICH RI 02818-0000

US

MARKFOR

W51JBY

0103 FA BN 01 HHS FIELD ARTIL

2841 SOUTH COUNTY TRAIL

BLDG 235

EAST GREENWICH RI 02818-0000

US

M/F: (TCN) W51JBY61400003

RDD:

PROJ: TP 3

SUPP ADD: W17S13 SIG: A

FOR GOVERNMENT USE ONLY: (IPD) 13

DIC: A0A DIST: ADV: 2A FC: KS

Need Ship Date:00/00/0000 Original Required Delivery Date:05/26/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0004 7017248128 0001 BT 1.000

NSN/MATERIAL:6505001538480

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

PAGE 15 OF 64 PAGES

SPE2DP-27-T-0118

PR: 7017248128 PRLI: 0001 CONT’D

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

PAGE 16 OF 64 PAGES

SPE2DP-27-T-0118

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

W81ENU

0449 AV HHC HHC COMBAT AVN

2050 NATIONAL GUARD DRIVE

MORRISVILLE NC 27560-8002

SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.

W51J4X

PAGE 17 OF 64 PAGES

SPE2DP-27-T-0118

0449 AV HHC HHC COMBAT AVN

2050 NATIONAL GUARD DRIVE

MORRISVILLE NC 27560-0000

US

MARKFOR

W51J4X

0449 AV HHC HHC COMBAT AVN

2050 NATIONAL GUARD DRIVE

MORRISVILLE NC 27560-0000

US

M/F: (TCN) W51J4X61690001

RDD:

PROJ: TP 3

SUPP ADD: W81KDP SIG: A

FOR GOVERNMENT USE ONLY: (IPD) 13

DIC: A0A DIST: ADV: 2A FC: 62

Need Ship Date:00/00/0000 Original Required Delivery Date:06/24/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0005 7018191851 0001 BT 1.000

NSN/MATERIAL:6505001538480

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be

PAGE 18 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7018191851 PRLI: 0001 CONT’D

as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

TO MIL-STD-129.

PAGE 19 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7018191851 PRLI: 0001 CONT’D

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

R21816

USS TUCSON SSN 770

UNIT 100171 BOX 1

PAGE 20 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7018191851 PRLI: 0001 CONT’D

FPO AP 96679

VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC

FREIGHT SHIPPING ADDRESS:

R21816

USS TUCSON SSN 770

DLA VENDORS: USE VSM FOR

RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC

M/F: (TCN) R2181662143358

RDD: 777

PROJ: JP5 TP 2

SUPP ADD: YNMH01 SIG: A

FOR GOVERNMENT USE ONLY: (IPD) 05

DIC: A41 DIST: E9B ADV: 2A FC: M7

Need Ship Date:00/00/0000

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0006 7018213273 0001 BT 1.000

NSN/MATERIAL:6505001538480

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

WITH ASTM D3951.

PAGE 21 OF 64 PAGES

SPE2DP-27-T-0118

PR: 7018213273 PRLI: 0001 CONT’D

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

PAGE 22 OF 64 PAGES

SPE2DP-27-T-0118

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

PRESERVATION, PACKING AND MARKING SHALL BE IN

PAGE 23 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7018213273 PRLI: 0001 CONT’D

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

W50YF2

0051 MD CO MEDICAL LOGISTI

AWCF SSF

BLD A5474 PRATT ST

W50YF2

0051 MD CO MEDICAL LOGISTI

AWCF SSF

BLD A5474 PRATT ST

FORT BRAGG NC 28310

US

MARKFOR

W50YF2

0051 MD CO MEDICAL LOGISTI

AWCF SSF

BLD A5474 PRATT ST

PAGE 24 OF 64 PAGES

SPE2DP-27-T-0118

M/F: (TCN) W50YF262460016

RDD: 260

PROJ: TP 2

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 05

DIC: A0A DIST: V ADV: 2A FC: Z9

Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0007 7017043542 0001 BT 1.000

NSN/MATERIAL:6505001538480

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

PAGE 25 OF 64 PAGES

SPE2DP-27-T-0118

PR: 7017043542 PRLI: 0001 CONT’D

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

PAGE 26 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7017043542 PRLI: 0001 CONT’D

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

PAGE 27 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7017043542 PRLI: 0001 CONT’D

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

W51J61

W8FH HQ 254TH REGT (CA)

100 CAMP DR BLDG 42

SEA GIRT NJ 08750-0000

PAGE 28 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7017043542 PRLI: 0001 CONT’D

W51J61

W8FH HQ 254TH REGT (CA)

100 CAMP DR BLDG 42

SEA GIRT NJ 08750-0000

US

MARKFOR

W51J61

W8FH HQ 254TH REGT (CA)

100 CAMP DR BLDG 42

SEA GIRT NJ 08750-0000

US

M/F: (TCN) W51J6161540003

RDD:

PROJ: TP 1

SUPP ADD: W81KR3 SIG: A

FOR GOVERNMENT USE ONLY: (IPD) 02

DIC: A0A DIST: ADV: 2A FC: 62

Need Ship Date:00/00/0000 Original Required Delivery Date:06/08/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0008 7018150114 0001 BT 1.000

NSN/MATERIAL:6505001538480

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

All DLA Master List of Technical and Quality Requirements take

Mark and label all packaging and packing in accordance with MIL-STD-129.

PAGE 29 OF 64 PAGES

SPE2DP-27-T-0118

SECTION B

PR: 7018150114 PRLI: 0001 CONT’D

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKGING DATA - MIL-STD-2073-1E

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER…