SPE2DH27T0088.pdf

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE2DH-27-T-0088

2. DATE ISSUED

2026 OCT 06

3. REQUISITION/PURCHASE REQUEST NO.

See Schedule

RATING

DLA TROOP SUPPORT

MEDICAL SUPPLY CHAIIN FSH

700 ROBBINS AVENUE

PHILADELPHIA PA 19111

USA

Name: Tina Vu Buyer Code:PDPSHB7 Tel: 445-737-1120 Fax: 215-737-5752 Email: Tina.Vu@dla.mil

6. DELIVER BY (Date)

5 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 OCT 13

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-844-347-2457 (Press 5 then speak or enter D-L-A).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DEFENSE LOGISTICS AGENCY (DLA) MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED ACQUISITIONS REVISION 105 (MAY 20, 2026) WHICH CAN BE FOUND ON THE WEB AT:

https://www.dla.mil/Portals/104/Documents/J7Acquisition/FinalMasterSolicitationForAutomatedSimplifiedAcquisitionsRevision5-20-26.pdf

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

THE FULL TEXT OF THE FAR, DFARS, AND DLAD PROVISIONS, CLAUSES, ANDPROCUREMENT NOTES CAN BE VIEWED AT THE FOLLOWING WEBSITES:

FAR: https://www.acquisition.gov, (this site is to be utilized for the FAR only; do not utilize for DFARS, DLAD, etc.)

DFARS: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLA Master Solicitation, Technical/Quality Requirements, Procurement Notes, and DLAD: https://www.dla.mil/Acquisition/Policy-and-Directives

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 36

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 36 PAGES

SPE2DH-27-T-0088

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

FAR 52.219-6 Notice of Total Small Business Set-Aside

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 334510

Refer to the corresponding small business size standard http://www.sba.gov/content/table-small-business-size-standards

However, the small business size standard for a concern that submits an offer but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition is

1) an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award; or 2) uses the HUBZone price evaluation preference to award to a HUBZone concern, unless the concern waived the evaluation preference.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

DESTINATION INSPECTION REQUIRED - FAR 52.246-2 APPLIES.

Fast Pay does not apply to this solicitation

Due to the volatility of demands, and frequent quantity changes on open

PAGE 3 OF 36 PAGES

SPE2DH-27-T-0088

SECTION A

purchase requests, offerors are highly encouraged to submit quantity ranges when quoting. If a PR is evaluated manually, quoting ranges provides the buyer the option to combine requirements or reduce the quantity as needed without resoliciting or adding any additional administrative burden for either party involved when making an award.

This does not apply to Auto IDC.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

APEX Accelerators, formally known as the Procurement Technical

Assistance Program (PTAP), is designed to increase the number of

U.S. businesses capable of bidding and performing on local, state, and federal government contracts. APEX Accelerators provide critical assistance to new and existing businesses interested government contracting to enhance the defense industrial base at no cost. Visit https://www.apexaccelerators.us/#/ for more information.

6, THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT

PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE

GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS

SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR

52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING

REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –

REPRESENTATION.

PAGE 4 OF 36 PAGES

SPE2DH-27-T-0088

SECTION A

Caution Notice: Offerors are required to comply with domestic material restrictions. The Berry Amendment, the Buy American Act, and other domestic material restrictions may apply. Offerors are instructed to refer to the solicitation clauses related to foreign sourcing for more information on applicability. The Berry Amendment threshold has been reduced to $150,000 and vendors must carefully review related clauses

DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability requirements. If your offer is based on a non-domestic material, you are required to provide disclosure information in your quote and/or through written notification to the point of contact listed in the solicitation.

DoD Class Deviation 2023-O0001: A small business joint venture offeror must submit, with its offer, the representation required in paragraph

(c) of FAR solicitation provision 52.212-3, Offeror Representations and

Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business

Program Representations, in accordance with 52.204-8(d) and 52.212- 3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB

Program; or

(E) Historically underutilized business zone small business.

ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING

Within approximately 2 months, ALL DLA contractors will be required to register via DLA’s Account Management & Provisioning System (AMPS) to access VSM. Without AMPS approval, contractors will not be able to access VSM or ship to DLA.

Contractors using VSM WebServices MUST update their internal schema or lose access and shipping ability. Online VSM users do not need schema changes.

PAGE 5 OF 36 PAGES

SPE2DH-27-T-0088

SECTION A

Required actions:

• Review VSM announcements. Schema updates are in the April 23, 2025 post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259

• Additional notices:

https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252 https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229

AMPS registration is not available at this time; however, check DLA's

DIBBS "Notices" section daily for updates.

• To receive AMPS/User Guide updates via email, contact:

JSONWEBServiceInquiry@dla.mil

Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the

Engineering Support Activity (ESA) for acceptability for future procurements of the same items. See L31 Additive Manufacturing (JUN

2018)

No History Available

PAGE 6 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018108954

NSN/MATERIAL:6525017011842

ITEM DESCRIPTION

SENSOR,DENTAL IMAGING SYSTEM

SENSOR, DENTAL IMAGING SYSTEM

TUXEDO INTRAORAL SENSOR;SIZE 2 (30.5 X 42.8 MM); DIRECT USB

CONNECTION; FEATURES CMOS SENSOR TECHNOLOGY; 20 LP/MM RESOLUTION; 5.6MM

THICKNESS; 3M CABLE LENGTH. A SMALL DEVICE COMPRISING A SENSOR USED IN

TO TAKE RADIOGRAPHIC IMAGES OF THE MOUTH; SUPPORT PART FOR END ITEM NSN

6525016999729.

UNIT OF ISSUE: EACH

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

BIDDER: PLEASE SPECIFY SOURCE AND PART

NUMBER BEING SUPPLIED.

ADEQUATE DATA FOR THE EVALUATION OF

ALTERNATE OFFERS IS NOT AVAILABLE AT

THE PROCUREMENT AGENCY. THE OFFEROR

MUST PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED

AND ALTERNATE PART FOR EVALUATION.

This device or drug is regulated by the FDA.

Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation.

Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.

REGULATION 892.1680 CLASS II

EVEN THOUGH A 510(K) IS REQUIRED, IT IS NECESSARY TO

MEET OTHER REQUIREMENTS FOR MARKETING. THESE INCLUDE:

REGISTRATION AND LISTING, LABELING OR GMP'S.

SHALL BE MARKED IAW THE LATEST EDITION

OF THE MEDICAL MARKING STANDARD NO. 1

https://www.dla.mil/Logistics-Operations/Packaging/

PAGE 7 OF 36 PAGES

SECTION B

APTERYX, LLC 31KV7 P/N 6101A

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 7018108954 0001 EA 2.000

NSN/MATERIAL:6525017011842

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

PAGE 8 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018108954 PRLI: 0001 CONT’D

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:

BULK BREAK POINT:

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.

FREIGHT SHIPPING ADDRESS:

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

MARKFOR

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

M/F: (TCN) W50YEF62390017

RDD: N

PROJ: TP 1

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 02

DIC: A0A DIST: V ADV: 2A FC: Z9

Need Ship Date:00/00/0000 Original Required Delivery Date:09/02/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0002 7018130702 0001 EA 4.000

PAGE 9 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130702 PRLI: 0001 CONT’D

NSN/MATERIAL:6525017011842

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PAGE 10 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130702 PRLI: 0001 CONT’D

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

MARKFOR

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

M/F: (TCN) W50YEF62400022

RDD: N

PROJ: TP 1

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 02

PAGE 11 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130702 PRLI: 0001 CONT’D

DIC: A0A DIST: V ADV: 2A FC: Z9

Need Ship Date:00/00/0000 Original Required Delivery Date:09/03/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0003 7018130701 0001 EA 4.000

NSN/MATERIAL:6525017011842

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

PAGE 12 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130701 PRLI: 0001 CONT’D

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

PAGE 13 OF 36 PAGES

SPE2DH-27-T-0088

PR: 7018130701 PRLI: 0001 CONT’D

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

MARKFOR

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

M/F: (TCN) W50YEF62400021

RDD: N

PROJ: TP 1

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 02

DIC: A0A DIST: V ADV: 2A FC: Z9

Need Ship Date:00/00/0000

PAGE 14 OF 36 PAGES

SPE2DH-27-T-0088

PR: 7018108953 PRLI: 0001 CONT’D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0004 7018108953 0001 EA 2.000

NSN/MATERIAL:6525017011842

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

PAGE 15 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018108953 PRLI: 0001 CONT’D

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

PAGE 16 OF 36 PAGES

SPE2DH-27-T-0088

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

PAGE 17 OF 36 PAGES

SPE2DH-27-T-0088

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

MARKFOR

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

M/F: (TCN) W50YEF62390018

RDD: N

PROJ: TP 1

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 02

DIC: A0A DIST: V ADV: 2A FC: Z9

Need Ship Date:00/00/0000 Original Required Delivery Date:09/02/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0005 7018130689 0001 EA 4.000

NSN/MATERIAL:6525017011842

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

PAGE 18 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130689 PRLI: 0001 CONT’D

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

PAGE 19 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130689 PRLI: 0001 CONT’D

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

PAGE 20 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130689 PRLI: 0001 CONT’D

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

PAGE 21 OF 36 PAGES

SPE2DH-27-T-0088

PR: 7018130689 PRLI: 0001 CONT’D

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

MARKFOR

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

M/F: (TCN) W50YEF62400023

RDD: N

PROJ: TP 1

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 02

DIC: A0A DIST: V ADV: 2A FC: Z9

Need Ship Date:00/00/0000

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%

0006 7018130700 0001 EA 4.000

NSN/MATERIAL:6525017011842

DELIVERY (IN DAYS):0005

DELIVER FOB: DESTINATION

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PAGE 22 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130700 PRLI: 0001 CONT’D

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

PAGE 23 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130700 PRLI: 0001 CONT’D

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

PAGE 24 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130700 PRLI: 0001 CONT’D

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

PAGE 25 OF 36 PAGES

SPE2DH-27-T-0088

SECTION B

PR: 7018130700 PRLI: 0001 CONT’D

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED

IN A SUITABLE SEALED UNIT CONTAINER CAPABLE

OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR

BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL

EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN

NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT

THE LOWEST RATE, TO POINT OF DELIVERY CALLED

FOR IN THE CONTRACT OR ORDER.

MATERIAL MUST BE MARKED IAW MEDICAL MARKING

STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES

TO MIL-STD-129.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO fssb@dla.mil.

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

FORT HOOD TX 76544

US

MARKFOR

W50YEF

W6YR USALRCTR FT HOOD

III CORPS TACTICAL AREA AWCF SSF

BLDG 4925 SANTA FE AVE

PAGE 26 OF 36 PAGES

SPE2DH-27-T-0088

PR: 7018130700 PRLI: 0001 CONT’D

M/F: (TCN) W50YEF62400024

RDD: N

PROJ: TP 1

SUPP ADD: W9046W SIG: C

FOR GOVERNMENT USE ONLY: (IPD) 02

DIC: A0A DIST: V ADV: 2A FC: Z9

Need Ship Date:00/00/0000

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 27 OF 36 PAGES

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION H - SPECIAL CONTRACT REQUIREMENTS

252.223-7001 HAZARD WARNING LABELS (DEC 1991) (DFARS)

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL

(If None, Insert “None.”) ACT

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph

(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(End of clause)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (DEC 2022) (DFARS)

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (JAN 2023) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (MAY 2024) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT (JAN 2023) (DFARS)

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES

(JAN 2023) (DFARS)

252.204-7024 NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023) (DFARS)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 28 OF 36 PAGES

SPE2DH-27-T-0088

SECTION I - CONTRACT CLAUSES (CONTINUED)

252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (JAN 2023) (DFARS)

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEPT

2014) (DFARS)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023) (DFARS)

252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY

COMPANIES (DEC 2018) (DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) (DFARS)

(a) Definitions. As used in this clause -- “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall --

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items --

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

When creating documents in WAWF, an invoice and receiving report are both required unless an exception at DFARS 232.7002

(a) applies. The invoice and receiving report may be submitted separately or together as a combo type document. See DFARS appendix F for detailed instructions on preparing the WAWF receiving report. ***NOTE: For contracts in accordance with fast payment procedures, if the customer does not have a registered acceptor in WAWF, submit an invoice only.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A for supply contracts/submit an invoice 2in1 for service contracts (Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.sam.gov/ https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 29 OF 36 PAGES

SPE2DH-27-T-0088

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC See Resulting Award

Issue By DoDAAC See Resulting Award

Admin DoDAAC** See Resulting Award

Inspect By DoDAAC See Resulting Award if applicable

Ship To Code See Resulting Award if…