SPE1C127Q0185.pdf
PDF 149 KB Posted
- Attached to
- WEBBING, TEXTILE AND 1 MORE ITEM
- Solicitation number
- SPE1C127Q0185
About this file
This is a Request for Quotations (RFQ) issued by DLA Troop Support for the procurement of textile webbing. The solicitation number is SPE1C1-27-Q-0185, issued on November 17, 2026, with quotations due by December 1, 2026. The government requires quotations for 30,000 yards of NSN 8305-00-782-3224 (Webbing, Textile) and 3,000 yards of NSN 8305-01-655-7755 (Webbing, Textile), with delivery required 120 days after order (ADO) to the DLA Distribution facility in New Cumberland, Pennsylvania on an FOB Destination basis. The webbing must comply with Parachute Industry Association specification PIA-W-4088G dated March 1, 2024, featuring nylon construction, olive drab CARC coloring (Chip Number 34088), 0.75-inch width, and 600-pound minimum breaking strength. The unit price should be quoted per yard, with quantity variance of plus or minus 2 percent permitted.
Quality assurance requirements mandate test reports and component certifications per DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements (Revision 1, August 2021), or alternatively, a Certificate of Conformance if the total contract award does not exceed $100,000. Contractors must identify all testing sites and provide technical points of contact; ISO 17025 accreditation or DLA Form 6005 certification survey submission is required. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129R, including ISPM 15 requirements for wood packaging material. The RFQ includes standard FAR and DFARS clauses addressing payment via WAWF, inspection and acceptance at destination, warranty provisions, transportation by sea (U.S.-flag vessel preference), security prohibitions, Buy American compliance, and various employment and compliance certifications. The contracting officer is Linda Cioppa-Pape at DLA Troop Support in Philadelphia, Pennsylvania.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE
4. CERT.FOR NAT. DEF.
UNDER BDSA REG. 2
AND/OR DMS REG. 1
5. ISSUED BY
7. DELIVERY
9. DESTINATION
10. PLEASE FURNISH QUOTATIONS TO THE
ISSUING OFFICE IN BLOCK 5 ON OR
BEFORE CLOSE OF BUSINESS (Date)
IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.
11. SCHEDULE (See Continuation Sheets)
12. DISCOUNT FOR PROMPT PAYMENT
d. CALENDAR DAYS
NUMBER PERCENTAGE
NOTE: Additional provisions and representations are are not attached.
13. NAME AND ADDRESS OF QUOTER
a. NAME OF QUOTER
14. SIGNATURE OF PERSON AUTHORIZED TO SIGN
QUOTATION
16. SIGNER
AUTHORIZED FOR LOCAL REPRODUCTION
Previous edition not useable
STANDARD FORM 18 (REV. 6-95)
Prescribed by GSA-FAR (48 CFR) 53.215-1(a)
SPE1C1-27-Q-0185
1. REQUEST NO.
2026 NOV 17
2. DATE ISSUED
7016927502
3. REQUISITION/PURCHASE REQUEST NO.
DO-C9
RATING
DLA TROOP SUPPORT
C AND T SUPPLY CHAIN
700 ROBBINS AVENUE
PHILADELPHIA PA 19111-5096
USA
Buyer: Linda Cioppapape PLCL56S Tel: 610 858 5023 Fax: 215-737-5226 Email: LINDA.CIOPPA-PAPE@DLA.MIL
120 DAYS ADO
6. DELIVER BY (Date)
8. TO:
c. CITY
d. STATE
b. STREET ADDRESS
a. NAME OF CONSIGNEE
e. ZIP CODE
a. 10 CALENDAR DAYS
b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS
15. DATE OF QUOTATION
a. NAME (Type or Print)
AREA CODE
c. TITLE (Type or Print)d. CITY
c. COUNTY
b. STREET ADDRESS
e. STATE f. ZIP CODE
See Schedule
2026 DEC 01
NUMBER
FOB DESTINATION
OTHER
(See Schedule)
CAGE
b. TELEPHONE
See attached schedule to complete quote information.
Quoter must also complete the following:
a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .
b. Prices quoted are:
___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .
___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.
___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;
___ Customer ________________________.
___ Other (provide basis) ______________________________________ _______________________________________ .
c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .
d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.
e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:
f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:
CONTINUED ON NEXT PAGE
PAGE 2 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLIES/SERVICES: PGC: 91158
ITEM DESCRIPTION:
WEBBING, TEXTILE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER)SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEBAT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECTON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFPISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
INDIVIDUAL NSN DATA
NSN 8305-00-782-3224; PGC91158
ITEM NAME: WEBBING, TEXTILE
PART NUMBER: PIA-W-4088
CAGE CODE: 1HHQ4
Shall be in accordance with (IAW) Parachute Industry Association PIA-W-4088G, WEBBING, TEXTILE, WOVEN NYLON dated 1 March2024.
The webbing is for use in the manufacturing of parachute equipment, tentage, clothing and other equipment.
EnvironmentalProtection: Abrasion Resistant Cloth Name: Twill Design Type: Flat Weight: 0.32 ounces per linear yard maximum Breaking strength:600 pounds minimum Fiber material: Nylon Color: Olive Drab CARC, Chip Number: 34088, IAW AMS-STD-595; replaces Olive Drab #7 andOlive Drab #107 according to Section 6.3 Standards of PIA-C-7219C & Section 6.3 Color standards of PIA-C-7020E.
Roll length: 90 to110 yards Procurement Group Code (PGC): 91158 Thickness: 0.025 inches minimum to 0.035 inches maximum Width: 0.75 (3/4) inches ±0.03 (1/32) inches;
0.72 inches minimum to 0.78 inches maximum Type: IA Class: Not identified during provisioning of the NSN.
Classreference. When procurement documents referencing this specification do not specify the class of webbing, any class in paragraph 1.2 of PIA-W-4088 may be used.
See below descriptions of each class:
Class 1 - Shuttle loom, nylon 6,6 Class 1A - Shuttleless loom,nylon 6,6 Class 2 - Shuttle or shuttleless loom, nylon 6 or nylon 6,6 Departure from cited designator: As modified by EnvironmentalProtection The unit of issue is a Yard (YD).
Each roll of the finished webbing shall be labeled or ticketed for fiber content in accordance with the Rules and Regulation Under the Textile Fiber Products Identification Act.
Each roll or spool of finishedwebbing shall be marked for identification in accordance with good commercial practice.
A durable tag shall be attached to each roll or spool, which shall be clearly and legibly printed with water soluble ink with the following information:
- Stock number -Nomenclature
- Specification number
- Yardage
- Contract number and date of manufacture (month and year)
- Contractor's name
- Nameof contracting agency.
Each roll or spool of webbing shall be labeled or ticketed for fiber content in accordance with the Rulesand Regulations under the Textile Fiber Products Identification Act.
The textile manufacturer shall properly identify the age ofthe textile materials by placing a tag on the finished goods or label on the containers identifying the specification to which thematerial is manufactured, the lot number and the date of manufacture.
The date of manufacture is defined as the date (month andyear) of the last manufacturing process that affects the
PAGE 3 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
physical characteristics of the material.
TEST REPORTS AND COMPONENTCERTIFICATIONS IN ACCORDANCE WITH
DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS, Revision 1 dated1 August 2021 (superseding DPSCM-4155.3 dated 3 November 1997) ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS.
**In lieu of theabovenamed requirement, if the total contract award does NOT exceed $100,000, the contract awardee may submit a Certificate ofConformance (CoC) per 3.1.3 of the DLA Troop Support Clothing and Textiles (C&T) Additional Quality Assurance Requirements (AQAR),Revision 1 dated August 2021.**
SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED,
INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT
BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT
WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP
SUPPORT CONTRACTING OFFICERTHROUGH MODIFICATION
TO THE CONTRACT.
RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS
RESPONSIBLE FOR THE PERFORMANCE OF ALLINSPECTION,
EXAMINATION, AND TEST REQUIREMENTS SPECIFIED
HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT.
THE GOVERNMENTRESERVES THE RIGHT TO PERFORM ANY
OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS
DEEMED NECESSARY TO ENSURE SUPPLIES ANDSERVICES
CONFORM TO PRESCRIBED REQUIREMENTS.
RT001: MEASURING AND TEST EQUIPMENT
52.246-15 CERTIFICATE OFCONFORMANCE
GOVERNMENT LABORATORY TESTING OF COMPONENTS FOR ACCEPTANCE PURPOSE
FOR PHYSICAL (NON-SHADE) TESTING:
*Onlyapplicable if the total contract award exceeds $100,000*
**In lieu of the abovenamed requirement, if the total contract award doesNOT exceed $100,000, the contract awardee may submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop Support Clothingand Textiles (C&T) Additional Quality Assurance Requirements (AQAR), Revision 1 dated August 2021.** THE VENDOR SHALL NOTIFY THEDLA Product Test Center -- Analytical FOURTEEN (14) CALENDAR DAYS TO THIRTY (30) CALENDAR DAYS IN ADVANCE OF WHEN LOTS ARE TO BEPRESENTED FOR SAMPLING AT THE ADDRESS BELOW.
THE CONTRACTOR'S APPROVED QUALIFIED LABORATORY WILL BE REQUIRED TO FORWARD A COMPLETED TEST REPORT FOR EACH LOT OF COMPONENTS TO THE ADDRESS BELOW. THE SUPPLIER'S SOURCE SAMPLING REPRESENTATIVE WILL PROVIDE THECOMPLETED DD FORM 1222 dated March 2021 TO THE LABORATORY TO BE SUBMITTED WITH THE COMPLETED TEST REPORT. TEST REPORTS SHALL NOT BEOLDER THAN
NINETY (90) CALENDAR DAYS.
LOT NOTIFICATIONS AND SOURCE SAMPLING DD1222s/TEST REPORTS SHALL BE FORWARDEDTO:
paactlab@dla.mil
SAMPLES FOR PHYSICAL TESTING WILL ONLY BE FORWARDED UPON REQUEST TO:
DLA Product Test Center -- Analytical 700 Robbins Avenue, BLDG 5D Philadelphia, PA 19111 EMAIL: paactlab@dla.mil
NOTE: PERMIT 45 CALENDAR DAYS
SHADE EVALUATION OFCONTRACTOR FURNISHED MATERIALS:
SHADE SAMPLING IS APPLICABLE
The color of the test specimen shall match the standard sample viewedusing AATCC Evaluation Procedure 9, Option C (2017e), with sources simulating artificial daylight D65 illuminant with a colortemperature of 6500 (+/- 200)K, with illumination of 100 (+/- 20) foot candles, and shall be a good match to the standard sampleunder incandescent lamplight at 2856 (+/- 200)K.
FOR SHADE TESTING: THE COMPLETED HARDCOPY DD FORM 1222 AND THE SWATCHES SHALL BEFORWARDED TO:
DLA Product Testing Center Analytical 700 Robbins Avenue, BLDG 5D Philadelphia, PA 19111 ATTN: Andrew Gabriele EMAIL: paactlab@dla.mil
PHONE: 215-737-6121
NOTE: PERMIT 30 CALENDAR DAYS.
PAGE 4 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
Identification of Testing Sites. Unless the contractmandates a Government laboratory be used to conduct testing, the prime contractor shall identify all testing sites that will perform any test required by the terms of the contract, including end item testing.
Any laboratory proposed by the contractor is subject to the approval of the contracting officer. Testing facilities shall be subject to on-site witnessing of testing by the Government.The use of a laboratory previously approved by the Government is not a guarantee that testing will be performed properly, nor doesit relieve a contractor from the contractual obligation to present conforming supplies accompanied by true, accurate, and valid test results.
Certification of Testing Sites. The prime contractor shall identify a technical point of contact for the testing site and provide current contact information. The prime contractor should alert the technical point of contact that the certificationprocess has begun. A current ISO 17025 accreditation whose scope encompasses the contractual testing or equivalent will be accepted. When a testing site and its contact information are provided to DLA Contracting and the DLA Product Specialist, the productspecialist will initiate a request for the DLA Product Test Center (DLA-PTC) to certify the lab. This request will be managed via an internal DLA Troop Support process.
In the absence of an appropriate ISO 17025 accreditation, the DLA-PTC will compare allrequired testing in the contract to the commercial lab capability. If the testing facility is new and/or unknown to the DLA-PTC, alab certification survey (DLA Form 6005) will be provided for submission.
If the DLA-PTC has a lab survey on file that is less than 3 years old, that survey will be used for the initial evaluation. The DLA-PTC may ask for additional information or clarifications. If the laboratory survey on file is over 3 years old, a new form will be sent out for the testing facility to fill out. During acontract, the laboratory may be asked to fill out another lab survey when the original survey becomes older than 3 years.
Note: The Qualified Laboratories List (QLL) previously maintained by DPSC has been canceled. No testing facility should refer to theirpreviously issued QLL number.
Approval. If the testing facility and its named subcontractors meet the capability of the requiredtesting, the DLA-PTC will notify the DLA Troop Support Product Specialist. Once approved by contracting, the testing facilitybecomes the Place of Performance and is placed in the contract.
Disapproval. If a testing facility does not meet thetesting capability as per the specifications, the prime contractor is asked to submit another laboratory, and the process startsanew.
Note: DLA will require a total of 45 calendar days from the date of the receipt of the request to add a certified testinglocation to the date the requestor (contractor) is provided a decision of the laboratory certification.
Identification of TestingSites. Unless the contract mandates a Government laboratory be used to conduct testing, the prime contractor shall identify alltesting sites that will perform any test required by the terms of the contract, including end item testing.
The prime contractorshall identify a technical point of contact for the testing site and provide current contact information to DLA Contracting and theDLA Product Specialist. The prime contractor should alert the technical point of contact that the certification process hasbegun.
Note: DLA will require a total of 45 calendar days from the date of receipt of the request to add a certified testinglocation to the date the requestor (contractor) is provided a decision of the laboratory certification.
For more details on the lab certification process, see the C&T Additional Quality Assurance Requirements, which is incorporated by reference into thiscontract.
P001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
INSPECTION AND ACCEPTANCE AT DESTINATION.
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:
NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.
APPLICATION FOR COPIES SHOULD BE ADDRESSEDTO:
AMERICAN SOCIETY FOR QUALITY
600 NORTH PLANKINTON AVENUE
MILWAUKEE, WISCONSIN 53203
(Ref. T0795 - May 17, 2006)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK
PAGE 5 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .
0001 8305-00-782-3224 30,000.000 YD $ ________________ $ ________________
WEBBING,TEXTILE
QTY VARIANCE: PLUS 2% MINUS 2%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 120 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNNTHKNESS:D
UNIT CONT:A2 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ SpecialRequirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
RP001: DLA PACKAGINGREQUIREMENTS FOR PROCUREMENT
INSPECTION AND ACCEPTANCE AT DESTINATION.
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:
NOTE: THEMOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.
APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:
AMERICAN SOCIETY FOR QUALITY
600 NORTH PLANKINTON AVENUE
MILWAUKEE, WISCONSIN 53203
(Ref. T0795 - May 17, 2006)
SECTION D - PACKAGING AND MARKING
ALL WOODPACKAGING MATERIAL (WPM) USED MUST MEET
REQUIREMENTS OF INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
(ISPM) 15, "GUIDELINESFOR REGULATING WOOD PACKAGING MATERIALS IN
INTERNATIONAL TRADE." DOD SHIPMENTS INSIDE AND OUTSIDE OF THE UNITED
STATES MUST MEETISPM 15 WHENEVER WPM IS USED TO SHIP DOD CARGO.
ALL WPM SHALL COMPLY WITH THE OFFICIAL QUALITY CONTROL PROGRAM FOR HEAT
TREATMENT(HT) OR KILN DRIED HEAT TREATMENT (KD HT) IN ACCORDANCE WITH
AMERICAN LUMBER STANDARD COMMITTEE<(>,<)>
INCORPORATED (ALSC) WOODPACKAGING MATERIAL PROGRAM AND WPM ENFORCEMENT
REGULATIONS (SEE HTTP://WWW.ALSC.ORG/).
ALL WPM SHALL INCLUDE CERTIFICATION/QUALITYMARKINGS IN
ACCORDANCE WITH THE ALSC STANDARD. MARKINGS SHALL BE PLACED IN AN
UNOBSTRUCTED AREA THAT WILL BE READILY VISIBLETO
INSPECTORS. PALLET MARKINGS SHALL BE APPLIED TO THE STRINGER OR BLOCK ON
DIAGONALLY OPPOSITE SIDES OF THE PALLET ANDBE
CONTRASTING AND CLEARLY VISIBLE. ALL CONTAINERS SHALL BE
MARKED ON A SIDE OTHER THAN THE TOP OR BOTTOM, CONTRASTING
AND CLEARLYVISIBLE. ALL DUNNAGE USED IN CONFIGURING AND/OR
SECURING THE LOAD SHALL ALSO COMPLY WITH ISPM 15 AND BE MARKED WITH AN
ASLC APPROVED DUNNAGE STAMP.
THE OVERALL PACKAGING AND PRESERVATION, IF APPLICABLE, SHALL CONFORM TO
MIL-STD-2073-1E (WITH CHANGE 4 DATED 22APRIL 2019) STANDARD PRACTICE
FOR MILITARY PACKAGING FOR SHIPMENTS TO THE DEPARTMENT OF DEFENSE.
UNIT CONTAINER:
EACH ROLL OF THEWEBBING SHALL BE INDIVIDUALLY PACKAGED IN ANY BAG USED
BY THE VENDOR.
INTERMEDIATE CONTAINER: NOT REQUIRED; THE USE OF INTERMEDIATE PACKAGING
PAGE 6 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
IS ENCOURAGED PARTICULARLY WHEN SUCH USE ENHANCES HANDLING AND STORAGE.
IF USED, VENDOR SHALL USE ANY SUITABLE FIBER BOXINCLUDED IN TABLE J-VII
OF MIL-STD-2073-1E CHANGE 4 (PDF Pages 185/214) MAY BE USED (SEE ALSO J.4.9.1).
EXTERIOR CONTAINER: SHALLBE STYLE: REGULAR SLOTTED BOX (RSC)<(>,<)>
TYPE: CORRUGATED FIBERBOARD (CF), VARIETY DOUBLEWALL FIBERBOARD (DW),
CLASS: DOMESTIC,GRADE: 275 WITH A SINGLE WALL LINER OR DW ECT GRADE 48,
MADE TO THE REQUIREMENTS OF ASTM D5118M, STANDARD PRACTICE FOR
FABRICATIONOF FIBERBOARD SHIPPING BOXES TO INSURE MEETING THE
REQUIREMENTS OF A PACK THAT WILL SUPPORT
RE-TRANSPORT, STORAGE, STACKING,ETC.
THE PACKAGING CONTAINER SHALL BE SUFFICIENT TO PROVIDE PROTECTION DURING
TRANSPORT AND STORAGE AND ARRIVE AT DESTINATION INTHE SAME CONDITION AS
ORIGIN.
PACKAGED COMPONENTS SHALL BE BULK PACKAGED IN A
THAT WILL SUPPORT RE-TRANSPORT, STORAGE, STACKING,ETC.
REFERENCE ASTM INTERNATIONAL DESIGNATION D1974M (STANDARD PRACTICE FOR
METHODS OF CLOSING, SEALING, AND REINFORCING FIBERBOARD BOXES, WHICH
DESCRIBES SEVERAL METHODS FOR CLOSING, SEALING, AND REINFORCING
FIBERBOARD (SOLID AND CORRUGATED) SHIPPING BOXES USEDFOR SHIPMENT.
A PRESSURE SENSITIVE IDENTIFICATION LABEL SHALL ATTACH TO
EACH PACKAGING BOX OF THE COMPONENT.
THE PACKAGINGCONTAINER SHALL BE SUFFICIENT TO PROVIDE PROTECTION DURING
TRANSPORT AND STORAGE AND ARRIVE AT DESTINATION IN THE SAME CONDITIONAS
ORIGIN.
SURFACE OF THE PALLET. WHEN SPECIFIED PALLETIZATION IS REQUIRED,
COMPONENTS SHALL BE PALLETIZED ON A FOUR-WAY ENTRYPALLET IN ACCORDANCE
WITH LOAD TYPE I OR IA, AS
APPLICABLE, OF MIL-STD-147E, CHANGE 2 DATED 27 JUNE 2019.
PALLETIZATION.Palletization shall be in accordance RP001, Section 3.
THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED
COMMERCIAL BONDINGMATERIALS. PALLET LOADS SHALL
CONTAIN THE SAME NUMBER OF CARTONS, OF IDENTICAL
QUANTITIES, OF ONE NSN, TO THE MAXIMUMEXTENT
POSSIBLE.
PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL
BE CLEARLY MARKED TO LIST ALL THE NSN'S CONTAINED
IN THE LOAD. NOCARTON SHALL HAVE MORE THAN ONE NSN.
AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON
PER NSN MAY BE SHORT OR OVER THE SPECIFIEDQUANTITY.
SAID CARTON SHALL BE CLEARLY MARKED "SHORT"
OR "OVER".
All unit, intermediate and shipping containers shall be markedin accordance with MIL-STD-129R, with Change 3 dated 25 February 2023.
GUIDANCE FOR THE REQUIRED IDENTIFICATION TEXT MARKINGS OFTHE UNIT,
INTERMEDIATE, AND EXTERIOR CONTAINERS ARE FOUND ON PAGES 24 TO 28 WITHIN
MIL-STD-129R WITH CHANGE 3 DATED 25 FEBRUARY2023.
Identification text marking on unit packs and intermediate containers will be located so the marking can be easily read andto ensure that the marking will not be destroyed when the pack or container is opened for inspection or until its contents have been used. The marking surface of a unit pack shall be the outermost wrap, bag, or container of the unit pack.
Lot number as anidentification text marking is required on all unit packs and intermediate containers.<(>,<)> The shipment number and containernumber are required on all exterior containers, palletized unit loads, and unpacked items. See MIL-STD-129R with Change 3, 5.1.2.f.(3) for more details.
4/7/2025
PAGE 7 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .
0001 7016927502 0001 N/A N/A N/A 10/15/2026
SUPPLIES/SERVICES: PGC: 91158
ITEM DESCRIPTION:
WEBBING, TEXTILE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER)SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEBAT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECTON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFPISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
INDIVIDUAL NSN DATA
NSN 8305-00-782-3224; PGC91158
ITEM NAME: WEBBING, TEXTILE
PART NUMBER: PIA-W-4088
CAGE CODE: 1HHQ4
Shall be in accordance with (IAW) Parachute Industry Association PIA-W-4088G, WEBBING, TEXTILE, WOVEN NYLON dated 1 March2024.
The webbing is for use in the manufacturing of parachute equipment, tentage, clothing and other equipment.
EnvironmentalProtection: Abrasion Resistant Cloth Name: Twill Design Type: Flat Weight: 0.32 ounces per linear yard maximum Breaking strength:600 pounds minimum Fiber material: Nylon
PAGE 8 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
Color: Olive Drab CARC, Chip Number: 34088, IAW AMS-STD-595; replaces Olive Drab #7 andOlive Drab #107 according to Section 6.3 Standards of PIA-C-7219C & Section 6.3 Color standards of PIA-C-7020E.
Roll length: 90 to110 yards Procurement Group Code (PGC): 91158 Thickness: 0.025 inches minimum to 0.035 inches maximum Width: 0.75 (3/4) inches ±0.03 (1/32) inches;
0.72 inches minimum to 0.78 inches maximum Type: IA Class: Not identified during provisioning of the NSN.
Classreference. When procurement documents referencing this specification do not specify the class of webbing, any class in paragraph 1.2 of PIA-W-4088 may be used.
See below descriptions of each class:
Class 1 - Shuttle loom, nylon 6,6 Class 1A - Shuttleless loom,nylon 6,6 Class 2 - Shuttle or shuttleless loom, nylon 6 or nylon 6,6 Departure from cited designator: As modified by EnvironmentalProtection The unit of issue is a Yard (YD).
Each roll of the finished webbing shall be labeled or ticketed for fiber content in accordance with the Rules and Regulation Under the Textile Fiber Products Identification Act.
Each roll or spool of finishedwebbing shall be marked for identification in accordance with good commercial practice.
A durable tag shall be attached to each roll or spool, which shall be clearly and legibly printed with water soluble ink with the following information:
- Stock number -Nomenclature
- Specification number
- Yardage
- Contract number and date of manufacture (month and year)
- Contractor's name
- Nameof contracting agency.
Each roll or spool of webbing shall be labeled or ticketed for fiber content in accordance with the Rulesand Regulations under the Textile Fiber Products Identification Act.
The textile manufacturer shall properly identify the age ofthe textile materials by placing a tag on the finished goods or label on the containers identifying the specification to which thematerial is manufactured, the lot number and the date of manufacture.
The date of manufacture is defined as the date (month andyear) of the last manufacturing process that affects the physical characteristics of the material.
TEST REPORTS AND COMPONENTCERTIFICATIONS IN ACCORDANCE WITH
DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS, Revision 1 dated1 August 2021 (superseding DPSCM-4155.3 dated 3 November 1997) ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS.
**In lieu of theabovenamed requirement, if the total contract award does NOT exceed $100,000, the contract awardee may submit a Certificate ofConformance (CoC) per 3.1.3 of the DLA Troop Support Clothing and Textiles (C&T) Additional Quality Assurance Requirements (AQAR),Revision 1 dated August 2021.**
SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED,
INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT
BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT
WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP
SUPPORT CONTRACTING OFFICERTHROUGH MODIFICATION
TO THE CONTRACT.
RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS
RESPONSIBLE FOR THE PERFORMANCE OF ALLINSPECTION,
EXAMINATION, AND TEST REQUIREMENTS SPECIFIED
HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT.
THE GOVERNMENTRESERVES THE RIGHT TO PERFORM ANY
OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS
DEEMED NECESSARY TO ENSURE SUPPLIES ANDSERVICES
CONFORM TO PRESCRIBED REQUIREMENTS.
RT001: MEASURING AND TEST EQUIPMENT
52.246-15 CERTIFICATE OFCONFORMANCE
GOVERNMENT LABORATORY TESTING OF COMPONENTS FOR ACCEPTANCE PURPOSE
FOR PHYSICAL (NON-SHADE) TESTING:
*Onlyapplicable if the total contract award exceeds $100,000*
**In lieu of the abovenamed requirement, if the total contract award doesNOT exceed $100,000, the contract awardee may
PAGE 9 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop Support Clothingand Textiles (C&T) Additional Quality Assurance Requirements (AQAR), Revision 1 dated August 2021.** THE VENDOR SHALL NOTIFY THEDLA Product Test Center -- Analytical FOURTEEN (14) CALENDAR DAYS TO THIRTY (30) CALENDAR DAYS IN ADVANCE OF WHEN LOTS ARE TO BEPRESENTED FOR SAMPLING AT THE ADDRESS BELOW.
THE CONTRACTOR'S APPROVED QUALIFIED LABORATORY WILL BE REQUIRED TO FORWARD A COMPLETED TEST REPORT FOR EACH LOT OF COMPONENTS TO THE ADDRESS BELOW. THE SUPPLIER'S SOURCE SAMPLING REPRESENTATIVE WILL PROVIDE THECOMPLETED DD FORM 1222 dated March 2021 TO THE LABORATORY TO BE SUBMITTED WITH THE COMPLETED TEST REPORT. TEST REPORTS SHALL NOT BEOLDER THAN
NINETY (90) CALENDAR DAYS.
LOT NOTIFICATIONS AND SOURCE SAMPLING DD1222s/TEST REPORTS SHALL BE FORWARDEDTO:
paactlab@dla.mil
SAMPLES FOR PHYSICAL TESTING WILL ONLY BE FORWARDED UPON REQUEST TO:
DLA Product Test Center -- Analytical 700 Robbins Avenue, BLDG 5D Philadelphia, PA 19111 EMAIL: paactlab@dla.mil
NOTE: PERMIT 45 CALENDAR DAYS
SHADE EVALUATION OFCONTRACTOR FURNISHED MATERIALS:
SHADE SAMPLING IS APPLICABLE
The color of the test specimen shall match the standard sample viewedusing AATCC Evaluation Procedure 9, Option C (2017e), with sources simulating artificial daylight D65 illuminant with a colortemperature of 6500 (+/- 200)K, with illumination of 100 (+/- 20) foot candles, and shall be a good match to the standard sampleunder incandescent lamplight at 2856 (+/- 200)K.
FOR SHADE TESTING: THE COMPLETED HARDCOPY DD FORM 1222 AND THE SWATCHES SHALL BEFORWARDED TO:
DLA Product Testing Center Analytical 700 Robbins Avenue, BLDG 5D Philadelphia, PA 19111 ATTN: Andrew Gabriele EMAIL: paactlab@dla.mil
PHONE: 215-737-6121
NOTE: PERMIT 30 CALENDAR DAYS.
Identification of Testing Sites. Unless the contractmandates a Government laboratory be used to conduct testing, the prime contractor shall identify all testing sites that will perform any test required by the terms of the contract, including end item testing.
Any laboratory proposed by the contractor is subject to the approval of the contracting officer. Testing facilities shall be subject to on-site witnessing of testing by the Government.The use of a laboratory previously approved by the Government is not a guarantee that testing will be performed properly, nor doesit relieve a contractor from the contractual obligation to present conforming supplies accompanied by true, accurate, and valid test results.
Certification of Testing Sites. The prime contractor shall identify a technical point of contact for the testing site and provide current contact information. The prime contractor should alert the technical point of contact that the certificationprocess has begun. A current ISO 17025 accreditation whose scope encompasses the contractual testing or equivalent will be accepted. When a testing site and its contact information are provided to DLA Contracting and the DLA Product Specialist, the productspecialist will initiate a request for the DLA Product Test Center (DLA-PTC) to certify the lab. This request will be managed via an internal DLA Troop Support process.
In the absence of an appropriate ISO 17025 accreditation, the DLA-PTC will compare allrequired testing in the contract to the commercial lab capability. If the testing facility is new and/or unknown to the DLA-PTC, alab certification survey (DLA Form 6005) will be provided for submission.
If the DLA-PTC has a lab survey on file that is less than 3 years old, that survey will be used for the initial evaluation. The DLA-PTC may ask for additional information or clarifications. If the laboratory survey on file is over 3 years old, a new form will be sent out for the testing facility to fill out. During acontract, the laboratory may be asked to fill out another lab survey when the original survey becomes older than 3 years.
Note: The Qualified Laboratories List (QLL) previously maintained by DPSC has been canceled. No testing facility should refer to theirpreviously issued QLL number.
Approval. If the testing facility and its named subcontractors meet the capability of the requiredtesting, the DLA-PTC will notify the DLA Troop Support Product Specialist. Once approved by contracting, the testing facilitybecomes the Place of Performance and is placed in the contract.
Disapproval. If a testing facility does not meet thetesting capability as per the specifications, the prime contractor is asked to submit another laboratory, and the process startsanew.
Note: DLA will require a total of 45 calendar days from the date of the receipt of the request to add a certified testinglocation to the date the requestor (contractor) is provided a decision of the laboratory certification.
PAGE 10 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
Identification of TestingSites. Unless the contract mandates a Government laboratory be used to conduct testing, the prime contractor shall identify alltesting sites that will perform any test required by the terms of the contract, including end item testing.
The prime contractorshall identify a technical point of contact for the testing site and provide current contact information to DLA Contracting and theDLA Product Specialist. The prime contractor should alert the technical point of contact that the certification process hasbegun.
Note: DLA will require a total of 45 calendar days from the date of receipt of the request to add a certified testinglocation to the date the requestor (contractor) is provided a decision of the laboratory certification.
For more details on the lab certification process, see the C&T Additional Quality Assurance Requirements, which is incorporated by reference into thiscontract.
P001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
INSPECTION AND ACCEPTANCE AT DESTINATION.
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:
NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.
APPLICATION FOR COPIES SHOULD BE ADDRESSEDTO:
AMERICAN SOCIETY FOR QUALITY
600 NORTH PLANKINTON AVENUE
MILWAUKEE, WISCONSIN 53203
(Ref. T0795 - May 17, 2006)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .
0002 8305-01-655-7755 3,000.000 YD $ ________________ $ ________________
WEBBING,TEXTILE
QTY VARIANCE: PLUS 2% MINUS 2%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 120 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNNTHKNESS:D
UNIT CONT:A2 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ SpecialRequirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
RP001: DLA PACKAGINGREQUIREMENTS FOR PROCUREMENT
INSPECTION AND ACCEPTANCE AT DESTINATION.
NOTE: THEMOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.
APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:
AMERICAN SOCIETY FOR QUALITY
PAGE 11 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
600 NORTH PLANKINTON AVENUE
MILWAUKEE, WISCONSIN 53203
(Ref. T0795 - May 17, 2006)
SECTION D - PACKAGING AND MARKING
ALL WOODPACKAGING MATERIAL (WPM) USED MUST MEET
REQUIREMENTS OF INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
(ISPM) 15, "GUIDELINESFOR REGULATING WOOD PACKAGING MATERIALS IN
INTERNATIONAL TRADE." DOD SHIPMENTS INSIDE AND OUTSIDE OF THE UNITED
STATES MUST MEETISPM 15 WHENEVER WPM IS USED TO SHIP DOD CARGO.
ALL WPM SHALL COMPLY WITH THE OFFICIAL QUALITY CONTROL PROGRAM FOR HEAT
TREATMENT(HT) OR KILN DRIED HEAT TREATMENT (KD HT) IN ACCORDANCE WITH
AMERICAN LUMBER STANDARD COMMITTEE<(>,<)>
INCORPORATED (ALSC) WOODPACKAGING MATERIAL PROGRAM AND WPM ENFORCEMENT
REGULATIONS (SEE HTTP://WWW.ALSC.ORG/).
ALL WPM SHALL INCLUDE CERTIFICATION/QUALITYMARKINGS IN
ACCORDANCE WITH THE ALSC STANDARD. MARKINGS SHALL BE PLACED IN AN
UNOBSTRUCTED AREA THAT WILL BE READILY VISIBLETO
INSPECTORS. PALLET MARKINGS SHALL BE APPLIED TO THE STRINGER OR BLOCK ON
DIAGONALLY OPPOSITE SIDES OF THE PALLET ANDBE
CONTRASTING AND CLEARLY VISIBLE. ALL CONTAINERS SHALL BE
MARKED ON A SIDE OTHER THAN THE TOP OR BOTTOM, CONTRASTING
AND CLEARLYVISIBLE. ALL DUNNAGE USED IN CONFIGURING AND/OR
SECURING THE LOAD SHALL ALSO COMPLY WITH ISPM 15 AND BE MARKED WITH AN
ASLC APPROVED DUNNAGE STAMP.
THE OVERALL PACKAGING AND PRESERVATION, IF APPLICABLE, SHALL CONFORM TO
MIL-STD-2073-1E (WITH CHANGE 4 DATED 22APRIL 2019) STANDARD PRACTICE
EACH ROLL OF THEWEBBING SHALL BE INDIVIDUALLY PACKAGED IN ANY BAG USED
BY THE VENDOR.
INTERMEDIATE CONTAINER: NOT REQUIRED; THE USE OF INTERMEDIATE PACKAGING
IS ENCOURAGED PARTICULARLY WHEN SUCH USE ENHANCES HANDLING AND STORAGE.
IF USED, VENDOR SHALL USE ANY SUITABLE FIBER BOXINCLUDED IN TABLE J-VII
OF MIL-STD-2073-1E CHANGE 4 (PDF Pages 185/214) MAY BE USED (SEE ALSO J.4.9.1).
EXTERIOR CONTAINER: SHALLBE STYLE: REGULAR SLOTTED BOX (RSC)<(>,<)>
TYPE: CORRUGATED FIBERBOARD (CF), VARIETY DOUBLEWALL FIBERBOARD (DW),
CLASS: DOMESTIC,GRADE: 275 WITH A SINGLE WALL LINER OR DW ECT GRADE 48,
MADE TO THE REQUIREMENTS OF ASTM D5118M, STANDARD PRACTICE FOR
FABRICATIONOF FIBERBOARD SHIPPING BOXES TO INSURE MEETING THE
REQUIREMENTS OF A PACK THAT WILL SUPPORT
RE-TRANSPORT, STORAGE, STACKING,ETC.
THE PACKAGING CONTAINER SHALL BE SUFFICIENT TO PROVIDE PROTECTION DURING
TRANSPORT AND STORAGE AND ARRIVE AT DESTINATION INTHE SAME CONDITION AS
ORIGIN.
PACKAGED COMPONENTS SHALL BE BULK PACKAGED IN A
THAT WILL SUPPORT RE-TRANSPORT, STORAGE, STACKING,ETC.
REFERENCE ASTM INTERNATIONAL DESIGNATION D1974M (STANDARD PRACTICE FOR
METHODS OF CLOSING, SEALING, AND REINFORCING FIBERBOARD BOXES, WHICH
DESCRIBES SEVERAL METHODS FOR CLOSING, SEALING, AND REINFORCING
FIBERBOARD (SOLID AND CORRUGATED) SHIPPING BOXES USEDFOR SHIPMENT.
A PRESSURE SENSITIVE IDENTIFICATION LABEL SHALL ATTACH TO
EACH PACKAGING BOX OF THE COMPONENT.
THE PACKAGINGCONTAINER SHALL BE SUFFICIENT TO PROVIDE PROTECTION DURING
TRANSPORT AND STORAGE AND ARRIVE AT DESTINATION IN THE SAME CONDITIONAS
ORIGIN.
SURFACE OF THE PALLET. WHEN SPECIFIED PALLETIZATION IS REQUIRED,
COMPONENTS SHALL BE PALLETIZED ON A FOUR-WAY ENTRYPALLET IN ACCORDANCE
WITH LOAD TYPE I OR IA, AS
APPLICABLE, OF MIL-STD-147E, CHANGE 2 DATED 27 JUNE 2019.
PALLETIZATION.Palletization shall be in accordance RP001, Section 3.
PAGE 12 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED
COMMERCIAL BONDINGMATERIALS. PALLET LOADS SHALL
CONTAIN THE SAME NUMBER OF CARTONS, OF IDENTICAL
QUANTITIES, OF ONE NSN, TO THE MAXIMUMEXTENT
POSSIBLE.
PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL
BE CLEARLY MARKED TO LIST ALL THE NSN'S CONTAINED
IN THE LOAD. NOCARTON SHALL HAVE MORE THAN ONE NSN.
AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON
PER NSN MAY BE SHORT OR OVER THE SPECIFIEDQUANTITY.
SAID CARTON SHALL BE CLEARLY MARKED "SHORT"
OR "OVER".
All unit, intermediate and shipping containers shall be markedin accordance with MIL-STD-129R, with Change 3 dated 25 February 2023.
GUIDANCE FOR THE REQUIRED IDENTIFICATION TEXT MARKINGS OFTHE UNIT,
INTERMEDIATE, AND EXTERIOR CONTAINERS ARE FOUND ON PAGES 24 TO 28 WITHIN
MIL-STD-129R WITH CHANGE 3 DATED 25 FEBRUARY2023.
Identification text marking on unit packs and intermediate containers will be located so the marking can be easily read andto ensure that the marking will not be destroyed when the pack or container is opened for inspection or until its contents have been used. The marking surface of a unit pack shall be the outermost wrap, bag, or container of the unit pack.
Lot number as anidentification text marking is required on all unit packs and intermediate containers.<(>,<)> The shipment number and containernumber are required on all exterior containers, palletized unit loads, and unpacked items. See MIL-STD-129R with Change 3, 5.1.2.f.(3) for more details.
4/7/2025
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:D
UNIT CONT:00 OPI:O
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
INSPECTION AND ACCEPTANCE ATDESTINATION.
NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BEUSED.
APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:
AMERICAN SOCIETY FOR QUALITY
600 NORTH PLANKINTON AVENUE
MILWAUKEE, WISCONSIN53203
(Ref. T0795 - May 17, 2006)
SECTION D - PACKAGING AND MARKING
ALL WOOD PACKAGING MATERIAL (WPM) USED MUST MEET
REQUIREMENTS OF INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
(ISPM) 15, "GUIDELINES FOR REGULATING WOOD PACKAGING MATERIALSIN
INTERNATIONAL TRADE." DOD SHIPMENTS INSIDE AND OUTSIDE OF THE UNITED
STATES MUST MEET ISPM 15 WHENEVER WPM IS USED TO SHIP DODCARGO.
ALL WPM SHALL COMPLY WITH THE OFFICIAL QUALITY CONTROL PROGRAM FOR HEAT
TREATMENT (HT) OR KILN DRIED HEAT TREATMENT (KD HT)IN ACCORDANCE WITH
AMERICAN LUMBER STANDARD COMMITTEE<(>,<)>
INCORPORATED (ALSC) WOOD PACKAGING MATERIAL PROGRAM AND WPMENFORCEMENT
PAGE 13 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
REGULATIONS (SEE HTTP://WWW.ALSC.ORG/).
ALL WPM SHALL INCLUDE CERTIFICATION/QUALITY MARKINGS IN
ACCORDANCE WITH THEALSC STANDARD. MARKINGS SHALL BE PLACED IN AN
UNOBSTRUCTED AREA THAT WILL BE READILY VISIBLE TO
INSPECTORS. PALLET MARKINGS SHALL BE APPLIED TO THE STRINGER OR BLOCK ON
DIAGONALLY OPPOSITE SIDES OF THE PALLET AND BE
CONTRASTING AND CLEARLY VISIBLE. ALL CONTAINERSSHALL BE
MARKED ON A SIDE OTHER THAN THE TOP OR BOTTOM, CONTRASTING
AND CLEARLY VISIBLE. ALL DUNNAGE USED IN CONFIGURINGAND/OR
SECURING THE LOAD SHALL ALSO COMPLY WITH ISPM 15 AND BE MARKED WITH AN
ASLC APPROVED DUNNAGE STAMP.
THE OVERALL PACKAGINGAND PRESERVATION, IF APPLICABLE, SHALL CONFORM TO
MIL-STD-2073-1E (WITH CHANGE 4 DATED 22 APRIL 2019) STANDARD PRACTICE
EACH ROLL OF THE WEBBING SHALL BE INDIVIDUALLY PACKAGED INANY BAG USED
BY THE VENDOR.
INTERMEDIATE CONTAINER: NOT REQUIRED; THE USE OF INTERMEDIATE PACKAGING
IS ENCOURAGED PARTICULARLY WHEN SUCH USE ENHANCES HANDLING AND STORAGE.
IF USED, VENDOR SHALL USE ANY SUITABLE FIBER BOX INCLUDED IN TABLE J-VII
OF MIL-STD-2073-1E CHANGE 4 (PDF Pages 185/214) MAY BE USED (SEE ALSO J.4.9.1).
EXTERIOR CONTAINER: SHALL BE STYLE: REGULAR SLOTTED BOX(RSC)<(>,<)>
TYPE: CORRUGATED FIBERBOARD (CF), VARIETY DOUBLEWALL FIBERBOARD (DW),
CLASS: DOMESTIC, GRADE: 275 WITH A SINGLE WALLLINER OR DW ECT GRADE 48,
MADE TO THE REQUIREMENTS OF ASTM D5118M, STANDARD PRACTICE FOR
FABRICATION OF FIBERBOARD SHIPPING BOXES TO INSURE MEETING THE
REQUIREMENTS OF A PACK THAT WILL SUPPORT
RE-TRANSPORT, STORAGE, STACKING, ETC.
THE PACKAGING CONTAINER SHALLBE SUFFICIENT TO PROVIDE PROTECTION DURING
TRANSPORT AND STORAGE AND ARRIVE AT DESTINATION IN THE SAME CONDITION AS
ORIGIN.
PACKAGED COMPONENTS SHALL BE BULK PACKAGED IN A
THAT WILL SUPPORT RE-TRANSPORT, STORAGE, STACKING, ETC.
REFERENCE ASTM INTERNATIONALDESIGNATION D1974M (STANDARD PRACTICE FOR
METHODS OF CLOSING, SEALING, AND REINFORCING FIBERBOARD BOXES, WHICH
DESCRIBES SEVERALMETHODS FOR CLOSING, SEALING, AND REINFORCING
FIBERBOARD (SOLID AND CORRUGATED) SHIPPING BOXES USED FOR SHIPMENT.
A PRESSURESENSITIVE IDENTIFICATION LABEL SHALL ATTACH TO
EACH PACKAGING BOX OF THE COMPONENT.
THE PACKAGING CONTAINER SHALL BE SUFFICIENT TOPROVIDE PROTECTION DURING
TRANSPORT AND STORAGE AND ARRIVE AT DESTINATION IN THE SAME CONDITION AS
ORIGIN.
SURFACE OF THE PALLET.WHEN SPECIFIED PALLETIZATION IS REQUIRED,
COMPONENTS SHALL BE PALLETIZED ON A FOUR-WAY ENTRY PALLET IN ACCORDANCE
WITH LOAD TYPE IOR IA, AS
APPLICABLE, OF MIL-STD-147E, CHANGE 2 DATED 27 JUNE 2019.
PALLETIZATION. Palletization shall be in accordance RP001,Section 3.
THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED
COMMERCIAL BONDING MATERIALS. PALLET LOADS SHALL
CONTAIN THE SAMENUMBER OF CARTONS, OF IDENTICAL
QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT
POSSIBLE.
PALLET LOADS CONTAINING MORE THAN ONE NSNSHALL
BE CLEARLY MARKED TO LIST ALL THE NSN'S CONTAINED
IN THE LOAD. NO CARTON SHALL HAVE MORE THAN ONE NSN.
AT THE END OF A SIZERUN, NO MORE THAN ONE CARTON
PER NSN MAY BE SHORT OR OVER THE SPECIFIED QUANTITY.
SAID CARTON SHALL BE CLEARLY MARKED "SHORT"
OR"OVER".
All unit, intermediate and shipping containers shall be marked in accordance with MIL-STD-129R, with Change 3 dated 25February 2023.
PAGE 14 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
GUIDANCE FOR THE REQUIRED IDENTIFICATION TEXT MARKINGS OF THE UNIT,
INTERMEDIATE, AND EXTERIOR CONTAINERS ARE FOUND ON PAGES 24 TO 28 WITHIN
MIL-STD-129R WITH CHANGE 3 DATED 25 FEBRUARY 2023.
Identification text marking on unit packs andintermediate containers will be located so the marking can be easily read and to ensure that the marking will not be destroyed whenthe pack or container is opened for inspection or until its contents have been used. The marking surface of a unit pack shall be the outermost wrap, bag, or container of the unit pack.
Lot number as an identification text marking is required on all unit packsand intermediate containers.<(>,<)> The shipment number and container number are required on all exterior containers, palletizedunit loads, and unpacked items. See MIL-STD-129R with Change 3, 5.1.2. f.(3) for more details.
4/7/2025
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .
0002 7016927502 0002 N/A N/A 8305016557755 10/15/2026
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION C - SPECIFICATIONS/SOW/SOO/ORD
C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)
SECTION E - INSPECTION AND ACCEPTANCE
52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR
SECTION F - DELIVERIES OR PERFORMANCE
52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR
52.247-34 F.O.B. DESTINATION (JAN 1991) FAR
SECTION G - CONTRACT ADMINISTRATION DATA
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (PRE-FILLED) (JAN 2023) DFARS As prescribed in 232.7004 (b), use the following clause:
(a) Definitions. As used in this clause - Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.
Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.
Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation System (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall -
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/.
(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) Document type. The Contractor shall submit payment requests using the following document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items -
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
Invoice (stand-alone) and Receiving Report (stand-alone) or Invoice and Receiving Report (combination)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table *
Field Name in WAWF Data to be entered in WAWF Guidance https://www.acquisition.gov/dfars/part-232-contract-financing https://www.sam.gov https://wawf.eb.mil/ https://wawf.eb.mil/ https://wawf.eb.mil/
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 29 PAGES
SPE1C1-27-Q-0185
SECTION G - CONTRACT ADMINISTRATION DATA (CONTINUED)
Field Name in WAWF Data to be entered in WAWF Guidance
Pay Official DoDAAC See Block 12 (SF26), 15 (DD 1155), or 18a
(SF1449)
(If blank, see resulting award)
Issue By DoDAAC See Block 5 (SF26), 6 (DD 1155), or 9 (SF1449)
(If blank, see resulting award)
Admin DoDAAC See Block 6 (SF26), 7 (DD 1155), or 16 (SF1449)
(If blank, see resulting award)
Inspect By DoDAAC SEE SECTION B (If blank, see resulting award)
Ship To Code SEE SECTION B (If blank, see resulting award)
Ship From Code SEE SECTION B (If blank, see resulting award)
Mark For Code SEE SECTION B (If blank, see resulting award)
Service Approver (DoDAAC)
(If blank, see resulting award)
Service Acceptor (DoDAAC)
(If blank, see resulting award)
Accept at Other DoDAAC (If blank, see resulting award)
LPO DoDAAC (If blank, see resulting award)
DCAA Auditor DoDAAC (If blank, see resulting award)
Other DoDAAC(s) (If blank, see resulting award)
(* Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (** Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .