SPE1C127Q0172.pdf

PDF 289 KB Posted

Attached to
GLOVE SET, CHEMICAL AND 7 MORE ITEMS
Solicitation number
SPE1C127Q0172
Issued by

About this file

This is a Request for Quotations (RFQ) issued by the Defense Logistics Agency (DLA) Troop Support for chemical protective gloves and related items. The solicitation number is SPE1C127Q0172, issued on November 12, 2026, with quotes due by November 27, 2026. This is a Total Small Business set-aside. The RFQ incorporates the DLA Master Solicitation for eProcurement Automated Simplified Acquisitions (Part 13), Revision 105, and all quotations must be submitted via DIBBS. The requisition number is 7018450425, and the production lead time is 163 days after order date, with an additional 90 days required for First Article Testing (FAT) on the first scheduled shipment of the initial delivery order.

The RFQ comprises eight line items totaling 6,000 pairs of chemical protective gloves across three types: Type I (25 mil) butyl gloves with inserts in five sizes (1,000 pairs each for X-Small and Small NSN 8415-01-144-1862), Type III (7 mil) butyl gloves only in four sizes (800 pairs each for NSN 8415-01-138-2501, 8415-01-138-2502, and 800 pairs for NSN 8415-01-138-2499, 8415-01-138-2500), and Type II (14 mil) butyl gloves in black for four sizes (800 pairs each for NSN 8415-01-138-2497, 8415-01-138-2498, and 400 pairs for NSN 8415-01-138-2499, 800 pairs for NSN 8415-01-138-2500). All items are FOB Destination with inspection and acceptance at destination. Pricing must be based on unit prices per set or pair with FOB Destination and include FAT requirements. All items are Type II shelf-life products with 60-month shelf life, extendable twice for five years (total of 15 years). FAT samples must be submitted to specified addresses with detailed visual, dimensional, porosity, physical, and chemical testing requirements. Delivery to Peckham Inc. OCIE in Lansing, Michigan is required by May 17, 2027. Quoters must complete all required certifications and representations, including Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

SPE1C1-27-Q-0172

1. REQUEST NO.

2026 NOV 12

2. DATE ISSUED

7018450425

3. REQUISITION/PURCHASE REQUEST NO.

DO-C9

RATING

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Buyer: Ryan Hutton DRH0143 Tel: 4457378134 Email: Ryan.Hutton@dla.mil

163 DAYS ADO

6. DELIVER BY (Date)

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2026 NOV 27

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 2 OF 83 PAGES

SPE1C1-27-Q-0172

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DLA MASTER SOLICITATION FOR EPROCUREMENT AUTOMATED SIMPLIFIED ACQUISITIONS (PART13) REVISION 105 (May 20, 2026) WHICH CAN BE FOUND ON THE WEB AT: https://www.

dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

NOTES:

1. THIS SOLICITATION INCLUDES FIRST ARTICLE TESTING REQUIREMENTS.

2. UNIT PRICES ARE TO BE BASED ON FOB DESTINATION AND INCLUDE FIRST ARTICLE TESTING REQUIREMENTS. (SEE E08)

3. THE PRODUCTION LEAD TIME (PLT) IS 163 DAYS AFTER THE DATE OF THE ORDER. HOWEVER, THERE IS A FIRST ARTICLE TESTING REQUIREMENT. THEREFORE, AN ADDITIONAL 90 DAYS WILL BE ADDED TO THE FIRST SCHEDULED SHIPMENT OF THE FIRST DELIVERY ORDER OF THE AWARD CONTRACT. THIS ADDITIONAL TIME IS TO ALLOW THE SUCCESSFUL AWARDEE TIME TO MANUFACTURE, SHIP, AND FOR DLA TROOP SUPPORT TO RECEIVE THE FAT SAMPLE AND FOR THE GOVERNMENT TO REVIEW THE SAMPLES.

First Article Testing (FAT) For Type I (25 MIL) PGC 01452:

First Article Testing Sample Size: 117 pairs total Visual/dimensional = 40 pairs {8 pair of each size (5 sizes)} Porosity = 40 pairs {8 pair of each size (5 sizes)} Physical = 27 pairs (Note: this sampling includes the Bond Sulfur tests) Chemical = 10 pairs (5 pairs large, 5 pairs X-Large)

For Types II (14 MIL) PGC 01848 and III (7 MIL) PGC 01826:

First Article Testing Sample Size: 117 pairs total Visual/dimensional = 40 pairs {10 pair of each size (4 sizes)} Porosity = 40 pairs {10 pair of each size (4 sizes)} Physical = 27 pairs (Note: this sampling includes the Bond Sulfur tests) Chemical = 10 pairs (5 pairs large, 5 pairs X-Large)

FAT will take 90 days to be performed. FAT samples for Visual, and Dimensional Requirements, along with a DD1222 form, shall be sent to the below address. A copy of that DD1222 shall be sent to the Government email, troopsupportchemteam@dla.mil: (Please include Manufacture/Cure Date in Remarks Block of the DD1222).

DLA Troop Support Philadelphia Attn: Ryan Hutton Bldg. 3-A-4422 700 Robbins Street Philadelphia, PA 19111-5092

FAT samples for Porosity, Physical and Chemical Property Requirements, along with a DD1222 form, shall be sent to the below address. A copy of that DD1222 shall be sent to the Government email, troopsupportchemteam@dla.mil: (Please include Manufacture/Cure Date in Remarks Block of the DD1222).

JEFS Test Management Services Attn: Cathy Campbell 120 Maple St London, OH 43140

Conformance Inspection Samples (Production Lot Testing, PLT): Conformance inspection shall not exceed 35 calendar days, from date test items are received at the test facility to the notification letter of test results. The samples along with a DD1222 form shall be sent to the below address, and a copy of that DD1222 shall be sent to the Government email, troopsupportchemteam@dla.mil: (Please include Manufacture/Cure Date in the Remarks Block of the DD1222).

JEFS Test Management Services Attn: Cathy Campbell 120 Maple St London, OH 43140

Conformance acceptance and rejection:

Testing results, along with the receipted DD1222 shall be provided to the Government at troopsupportchemteam@dla.mil.

The Government will then provide a letter of acceptance or rejection based on the test results. The Contractor will receive the letter of acceptance/rejection from the Government not to exceed 35 calendar days. Once the Contractor receives PASSING test results and the QAR releases the lot with their signature on Wide Area Work Flow (WAWF), the Contractor can then ship the lot. If FAILING results are received on PLT, a retest of that lot shall be done. The Contractor will be notified that a retest will be taking place; additional time will be required based on the lab's root cause analysis of the failure. If additional samples are needed for a retest, the Contractor will be notified. If PASSING results are received, the same steps as above will follow, If retest fails, a rejection letter of that lot shall be provided to the Contractor. That lot is to be segregated from all other production lots to prevent intermingling with conforming product. The Contractor will conduct and provide a root cause analysis and provide Corrective Action Report (CAR) to the Government.

Shelf Life This is a Type II Shelf Life item With a Shelf Life of 60 months Extendable twice (2) for five (5) years For a total of 15 years

Surveillance

Shelf-Life Month: 180 Months (15 years) Shelf-Life Type: II

PAGE 3 OF 83 PAGES

SPE1C1-27-Q-0172

First Inspection Month: 060 Re Inspection Month: 060 Re Inspection Limit: 2 The first inspection at 60 month consists of Chemical Agent and Physical Property Testing by JEFS. This initial inspection extends the shelf-life of the items to their whole life of 15 years. The initial inspection at 60 month is followed by reinspection at 120 months. Re-inspection limit of two (2) indicates that there will be a total of two inspections - at 60 months and 120 months.

Address to ship the surveillance set-aside samples:

DoDDACC: HQ0493 Joint Test Operations Center (JTOC) Cathy Campbell 120 Maple ST.

London, Ohio 43140

Surveillance Sample Tracking:

A separate mailbox is set up to send and receive the surveillance sample form depicting set-aside samples. The email address associated with this current email is the initial transmission coming from the surveillance mailbox. Included in this email is the surveillance sample form (see attached Surveillance Sample Tracking) which must be filled out in its entirety, both by the contractor upon the release of the samples and by the JPEO-CBD Enterprise Fielding and Surveillance (JEFS) depot in London, OH upon the receipt of the samples. Listed below are the directions for filling out the surveillance sample form and the procedures of forwarding.

Directions:

Release of the samples from the contractor:

Each time a release of the samples is processed the contractor must fill out the form and send it to the Setaside.

receipts@dla.mil email address where DLA Troop Support will receive it and place it in our database at DLA Troop Support.

Receipt of the samples at the depot:

Each time a delivery of the samples is received at the JEFS depot in London, OH, depot personnel must fill out the form in its entirety and send it to the Setaside.receipts@dla.mil email address where DLA Troop Support will receive it and place it in the database.

Shipping:

The Contractor shall bear responsibility for cost of transporting the Production Lot Test (PLT) samples to the designated destination. Cost of transporting PLT samples should be no greater than cost of US Postal 2 day delivery.

Identification and Traceability:

The Contractor shall maintain traceability records for all component parts used to manufacture the end item product.

All component parts lot identification shall be traceable via the end item product's lot number and contract number.

Subcontractor's component part lot information shall enable traceability to the raw materials used in the component part. Records shall be maintained and readily available for government review.

The Contractor is responsible for electronically reporting details of lot configuration, size, and quantity in a standardized format for a centralized database knows as the Production Lot Data Registry (JACKS-PLDR).

If the Contractor cannot electronically submit DD250 through VIM please send the following information to SMBLOGCOMCBRNLOGCELL@usmc.mil :

MANUFACTURER ID:

CAGE CODE:

SUBMITTING P.O.C.:

LOT NUMBER:

CONTRACT/ORDER NUMBER:

DATE OF MANUFACTURING:

WARRANTY EXPIRATION DATE:

SET ASIDE SAMPLE QTY (WHEN APPLICABLE):

ITEM NAME:

SIZE/ NSN/ QUANTITY:

PAGE 4 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLIES/SERVICES: PGC: 01452

ITEM DESCRIPTION:

GLOVE SET, CHEMICAL PROTECTIVE

RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RA001: THISDOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THEDLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEBAT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECTON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFPISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RD002, COVERED DEFENSEINFORMATION APPLIES

RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers andNon-Manufacturers

BUTYL, GLOVES TYPE I ( GLOVES WITH INSERTS ), 25 MIL

PGC 01452 NSN

Size NIIN X Small 8415 011441862 Small 8415010333517 Medium 8415 010333518 Large 8415 010333519 X Large 8415 010333520 INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is herebycanceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQZ1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for theirparticular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online athttp://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia,PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month(extendable) applies to this item.

Critical Safety Item

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnit_of_Issue_and_Purchase_Unit.xlsx&wdOrigin=BROWSELINK

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 8415-01-033-3520 1,000.000 SE $ ________________ $ ________________

GLOVE SET,CHEMICAL

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO

PAGE 5 OF 83 PAGES

SPE1C1-27-Q-0172

SUPPLY/SERVICE: PGC: 01452 CONT'D

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0

UNIT CONT:ZZ OPI:O

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No specialmarking

TYPE II SHELF LIFE ITEM - SHELF LIFE 60 MONTHS.

Preservation and packaging shall be Level C/C in accordancewith ASTM-D3951. In addition, one pair of Type I chemical protective gloves with instruction sheet and one pair of cotton knittedgloves of matching size shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The cotton gloves shall be sandwiched between the Type I chemical protective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure ofthe bag shall be heat sealed with the seal made as close as possible to the open end. The bag may be fabricated from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled.

Inaddition, seventy-two (72) glove sets of one size only shall be packed in a fiberboard shipping container conforming to styleRSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTM- D1974 and ASTM-D5118. The inside of each shipping containershall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.

A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.

MARKINGSHALL BE IN ACCORDANCE WITH

MIL-STD-129P.

SPECIAL MARKING CODE:

TYPE II SHELF LIFE MARKINGS.

DOD BAR CODE MARKING REQUIREDIN

ACCORDANCE WITH MIL-STD-129P.

THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR

THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED

IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT

SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS

PER HUNDREDUNITS SHALL BE 2.5.

EXAMINE

DEFECT

MARKING,,,,,,,,,,(EXTERIOR & UNIT PACKS)

,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,,

,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD

OF APPLICATION.

MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS

SPECIFIED.

WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,,

,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,

LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.

OPEN

AND NONCONTINUOUS HEAT SEALED SEAMS

AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,

,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED

CONTAINER.

GLOVES

NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE

CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.

CONTENT

NUMBER

OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN

REQUIRED.

PAGE 6 OF 83 PAGES

SPE1C1-27-Q-0172

PALLETIZATIONEXAMINATION.

THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE

EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE

SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.

THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY

PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN

TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.

EXAMINE

DEFECT

FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED

,,MAXIMUM REQUIREMENTS.

PALLETIZATION

,,PALLETPATTERN NOT AS SPECIFIED.

,,,,LOAD NOT BONDED AS SPECIFIED.

WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.

MARKING

OMITTED;

INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,

SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.

PACKAGING.

PALLETIZATION.

BOXES OFGLOVES, PACKED AS SPECIFIED,

SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH

WING-TYPE PALLET AND THE LOAD BONDED.

MARKING.

INADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT

OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZEDUNIT

LOADS SHALL BE MARKED IN ACCORDANCE WITH ASTM D 3951.

PARCEL POST ADDRESS:

UY0157

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

LANSING MI 48906

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 7018450425 0001 N/A N/A N/A 05/17/2027

PAGE 7 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLY/SERVICE: PGC: 01452 CONT'D

SUPPLIES/SERVICES: PGC: 01452

GLOVE SET, CHEMICAL PROTECTIVE

RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RA001: THISDOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THEDLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEBAT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECTON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFPISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RD002, COVERED DEFENSEINFORMATION APPLIES

RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers andNon-Manufacturers

BUTYL, GLOVES TYPE I ( GLOVES WITH INSERTS ), 25 MIL

PGC 01452 NSN

Size NIIN X Small 8415 011441862 Small 8415010333517 Medium 8415 010333518 Large 8415 010333519 X Large 8415 010333520 INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is herebycanceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQZ1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for theirparticular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online athttp://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia,PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month(extendable) applies to

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0002 8415-01-144-1862 1,000.000 SE $ ________________ $ ________________

GLOVE SET,CHEMICAL

PAGE 8 OF 83 PAGES

SPE1C1-27-Q-0172

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0

UNIT CONT:ZZ OPI:O

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No specialmarking

TYPE II SHELF LIFE ITEM - SHELF LIFE 60 MONTHS.

Preservation and packaging shall be Level C/C in accordancewith ASTM-D3951. In addition, one pair of Type I chemical protective gloves with instruction sheet and one pair of cotton knittedgloves of matching size shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The cotton gloves shall be sandwiched between the Type I chemical protective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure ofthe bag shall be heat sealed with the seal made as close as possible to the open end. The bag may be fabricated from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled.

Inaddition, seventy-two (72) glove sets of one size only shall be packed in a fiberboard shipping container conforming to styleRSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTM- D1974 and ASTM-D5118. The inside of each shipping containershall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.

A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.

MARKINGSHALL BE IN ACCORDANCE WITH

MIL-STD-129P.

SPECIAL MARKING CODE:

TYPE II SHELF LIFE MARKINGS.

DOD BAR CODE MARKING REQUIREDIN

ACCORDANCE WITH MIL-STD-129P.

THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR

THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED

IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT

SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS

PER HUNDREDUNITS SHALL BE 2.5.

EXAMINE

DEFECT

MARKING,,,,,,,,,,(EXTERIOR & UNIT PACKS)

,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,,

,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD

OF APPLICATION.

MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS

SPECIFIED.

WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,,

,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,

LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.

OPEN

AND NONCONTINUOUS HEAT SEALED SEAMS

AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,

,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED

CONTAINER.

GLOVES

NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE

PAGE 9 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLY/SERVICE: PGC: 01452 CONT'D

CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.

CONTENT

NUMBER

OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN

REQUIRED.

PALLETIZATIONEXAMINATION.

THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE

EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE

SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.

THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY

PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN

TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.

EXAMINE

DEFECT

FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED

,,MAXIMUM REQUIREMENTS.

PALLETIZATION

,,PALLETPATTERN NOT AS SPECIFIED.

,,,,LOAD NOT BONDED AS SPECIFIED.

WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.

MARKING

OMITTED;

INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,

SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.

PACKAGING.

PALLETIZATION.

BOXES OFGLOVES, PACKED AS SPECIFIED,

SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH

WING-TYPE PALLET AND THE LOAD BONDED.

MARKING.

INADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT

QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESVMAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:O

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

TYPE II SHELF LIFE ITEM - SHELF LIFE 60 MONTHS.

Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type I chemical protective gloves withinstruction sheet and one pair of cotton knitted gloves of matching size shall be unit packed in a flat plastic bag of 0.015 inchnominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glovefacing outward to permit the required markings to be read. The cotton gloves shall be sandwiched between the Type I chemicalprotective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to eachother and the formed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible tothe open end. The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation,excess air within the bag shall be expelled.

In addition, seventy-two (72) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTM- D1974and ASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic,variety DW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.

PAGE 10 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLY/SERVICE: PGC: 01452 CONT'D

A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall beaffixed to the outside of the individual bag.

MARKING SHALL BE IN ACCORDANCE WITH

MIL-STD-129P.

SPECIAL MARKING CODE:

TYPE II SHELF LIFE MARKINGS.

DOD BAR CODE MARKING REQUIRED IN

ACCORDANCE WITH MIL-STD-129P.

THE FULLY PACKAGED END ITEMS SHALL BE EXAMINEDFOR

THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED

IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT

SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS

PER HUNDRED UNITS SHALL BE 2.5.

EXAMINE

DEFECT

MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS)

,,,,,,OMITTED, INCORRECT,ILLLEGIBLE, OF ,,

,,,,,,,,,,,,,,IMPROPER SIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD

OF APPLICATION.

MATERIALSANY COMPONENT MISSING, DAMAGED OR NOT AS

SPECIFIED.

WORKMANSHIP INADEQUATE APPLICATION OFCOMPONENTS ,,,,,,,,,,

,,,,SUCH AS:INCOMPLETE SEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,

LOOSE STRAPPING, IMPROPER,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.

OPEN

AND NONCONTINUOUS HEAT SEALED SEAMS

AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,

,,INCORRECTLYFABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED

CONTAINER.

GLOVES

NOT POSITIONED CUFF TO FINGERTIP, ,,,,,,,,,,,,WITH BACK OF EACH GLOVE

CUFF NOT FACING,,,,,,,,,,,,OUTWARD.

CONTENT

NUMBER

OF PAIRS OFGLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN

REQUIRED.

PALLETIZATION EXAMINATION.

THE FULLY PACKAGED AND PALLETIZED ENDITEMS SHALL BE

EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE

SHALL BE EXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.

THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY

PACKAGED. THE INSPECTION LEVEL SHALL BE S-1 AND THE AQL, EXPRESSED IN

TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.

EXAMINE

DEFECT

FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED

,,MAXIMUMREQUIREMENTS.

PALLETIZATION

,,PALLET PATTERN NOT ASSPECIFIED.

,,,,LOAD NOT BONDED AS SPECIFIED.

WEIGHT ,,,,EXCEEDS MAXIMUM LOAD LIMITS.

MARKING

OMITTED;

INCORRECT; ILLEGIBLE; OF ,,,,,,,,,,,,,,,,IMPROPERSIZE, LCATION,

SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.

PACKAGING.

PALLETIZATION.

BOXES OF GLOVES, PACKED ASSPECIFIED,

SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH

WING-TYPE PALLET AND THE LOAD BONDED.

PAGE 11 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLY/SERVICE: PGC: 01452 CONT'D

MARKING.

IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT

OR PURCHASE ORDER, UNIT PACKS, SHIPPING CONTAINERS AND PALLETIZED UNIT

LOADS SHALL BEMARKED IN ACCORDANCE WITH ASTM D 3951.

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

ITEM PR PRLI PR PRLI Material Need Ship Date .

0002 7018450425 0002 N/A N/A N/A 05/17/2027

SUPPLIES/SERVICES: PGC: 01826

GLOVES, CHEMICAL PROTECTIVE

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RD004: Cybersecurity Maturity Model Certification (CMMC)Level 2 Self-Assessment

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/ORQUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITYREQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THEREVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RD002, COVERED DEFENSEINFORMATION APPLIES

TYPE III ( GLOVES ONLY ), 7 MIL

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

PAGE 12 OF 83 PAGES

SPE1C1-27-Q-0172

SUPPLY/SERVICE: PGC: 01826 CONT'D

Future acquisitionsmay refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as areplacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the StandardizationDocument Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available onlineat www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

RS062: Shelf life requirementRS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month (extendable) applies to

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0003 8415-01-138-2501 800.000 PR $ ________________ $ ________________

Butyl Gloves,Chem Protective, 7Mil

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0

UNIT CONT:ZZ OPI:O

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No specialmarking

TYPE II SHELF LIFE ITEM - SHELF LIFE 60 MONTHS.

Preservation and packaging shall be Level C/C in accordancewith ASTM-D3951. In addition, one pair of Type I chemical protective gloves with instruction sheet and one pair of cotton knittedgloves of matching size shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The cotton gloves shall be sandwiched between the Type I chemical protective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure ofthe bag shall be heat sealed with the seal made as close as possible to the open end. The bag may be fabricated from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled.

Inaddition, seventy-two (72) glove sets of one size only shall be packed in a fiberboard shipping container conforming to styleRSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTM- D1974 and ASTM-D5118. The inside of each shipping containershall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.

A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.

PAGE 13 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLY/SERVICE: PGC: 01826 CONT'D

MARKINGSHALL BE IN ACCORDANCE WITH

MIL-STD-129P.

SPECIAL MARKING CODE:

TYPE II SHELF LIFE MARKINGS.

DOD BAR CODE MARKING REQUIREDIN

ACCORDANCE WITH MIL-STD-129P.

THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR

THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED

IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT

SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS

PER HUNDREDUNITS SHALL BE 2.5.

EXAMINE

DEFECT

MARKING,,,,,,,,,,(EXTERIOR & UNIT PACKS)

,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,,

,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD

OF APPLICATION.

MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS

SPECIFIED.

WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,,

,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,

LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.

OPEN

AND NONCONTINUOUS HEAT SEALED SEAMS

AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,

,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED

CONTAINER.

GLOVES

NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE

CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.

CONTENT

NUMBER

OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN

REQUIRED.

PALLETIZATIONEXAMINATION.

THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE

EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE

SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.

THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY

PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN

TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.

EXAMINE

DEFECT

FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED

,,MAXIMUM REQUIREMENTS.

PALLETIZATION

,,PALLETPATTERN NOT AS SPECIFIED.

,,,,LOAD NOT BONDED AS SPECIFIED.

WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.

MARKING

OMITTED;

INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,

SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.

PACKAGING.

PALLETIZATION.

BOXES OFGLOVES, PACKED AS SPECIFIED,

SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH

WING-TYPE PALLET AND THE LOAD BONDED.

MARKING.

INADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT

PAGE 14 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:O

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

TYPE II SHELF LIFE ITEM - SHELF LIFE 60 MONTHS.

Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type I chemical protective gloves withinstruction sheet and one pair of cotton knitted gloves of matching size shall be unit packed in a flat plastic bag of 0.015 inchnominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glovefacing outward to permit the required markings to be read. The cotton gloves shall be sandwiched between the Type I chemicalprotective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to eachother and the formed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible tothe open end. The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation,excess air within the bag shall be expelled.

In addition, seventy-two (72) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTM- D1974and ASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic,variety DW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.

A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall beaffixed to the outside of the individual bag.

MARKING SHALL BE IN ACCORDANCE WITH

MIL-STD-129P.

SPECIAL MARKING CODE:

TYPE II SHELF LIFE MARKINGS.

DOD BAR CODE MARKING REQUIRED IN

ACCORDANCE WITH MIL-STD-129P.

THE FULLY PACKAGED END ITEMS SHALL BE EXAMINEDFOR

THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED

IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT

SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS

PER HUNDRED UNITS SHALL BE 2.5.

EXAMINE

DEFECT

MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS)

,,,,,,OMITTED, INCORRECT,ILLLEGIBLE, OF ,,

,,,,,,,,,,,,,,IMPROPER SIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD

OF APPLICATION.

MATERIALSANY COMPONENT MISSING, DAMAGED OR NOT AS

SPECIFIED.

WORKMANSHIP INADEQUATE APPLICATION OFCOMPONENTS ,,,,,,,,,,

,,,,SUCH AS:INCOMPLETE SEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,

LOOSE STRAPPING, IMPROPER,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.

OPEN

AND NONCONTINUOUS HEAT SEALED SEAMS

AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,

,,INCORRECTLYFABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED

CONTAINER.

GLOVES

NOT POSITIONED CUFF TO FINGERTIP, ,,,,,,,,,,,,WITH BACK OF EACH GLOVE

CUFF NOT FACING,,,,,,,,,,,,OUTWARD.

CONTENT

NUMBER

OF PAIRS OFGLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN

REQUIRED.

PAGE 15 OF 83 PAGES

SPE1C1-27-Q-0172

PALLETIZATION EXAMINATION.

THE FULLY PACKAGED AND PALLETIZED ENDITEMS SHALL BE

EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE

SHALL BE EXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.

THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY

PACKAGED. THE INSPECTION LEVEL SHALL BE S-1 AND THE AQL, EXPRESSED IN

TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.

EXAMINE

DEFECT

FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED

,,MAXIMUMREQUIREMENTS.

PALLETIZATION

,,PALLET PATTERN NOT ASSPECIFIED.

,,,,LOAD NOT BONDED AS SPECIFIED.

WEIGHT ,,,,EXCEEDS MAXIMUM LOAD LIMITS.

MARKING

OMITTED;

INCORRECT; ILLEGIBLE; OF ,,,,,,,,,,,,,,,,IMPROPERSIZE, LCATION,

SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.

PACKAGING.

PALLETIZATION.

BOXES OF GLOVES, PACKED ASSPECIFIED,

SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH

WING-TYPE PALLET AND THE LOAD BONDED.

MARKING.

IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT

QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00

WRAP MAT:00CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:O

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIALMARKING CODE:00 -00 No special marking

NOTE: THIS IS A TYPE II SHELF LIFE ITEM

WITH A SHELF LIFE OF 60 MONTHS.

Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951. In addition, one pair of Type III chemical protective gloves withinstruction sheet shall be unit packed in a flat plastic bag of

0.015 inch nominal thickness. Each pair of chemical protectivegloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and theformed edges of the bag. The final closure of the bag shall be heat sealed with the seal made as close as possible to the open end.The bag may be fabricated from the polyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled.

In addition, one hundred and forty-four (144) glove sets of one size only shall be packed in afiberboard shipping container conforming to style RSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTM- D1974 andASTM-D5118. The inside of each shipping container shall be fitted with a box liner conforming to type CF, class domestic, varietyDW, minimum grade 200 of ASTM-D1974 and ASTM-D5118.

A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to theoutside of the individual bag.

MARKING SHALL BE IN ACCORDANCE WITH

MIL-STD-129P. SPECIAL MARKING CODE:

TYPE II SHELF LIFEMARKINGS.

NOTE: TYPE II SHELF LIFE 60 MONTHS.

PAGE 16 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLY/SERVICE: PGC: 01826 CONT'D

DOD BAR CODE MARKING REQUIRED IN

ACCORDANCE WITH MIL-STD-129P.

DOD BAR CODE MARKINGREQUIRED IN

ACCORDANCE WITH MIL-STD-129P.

THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR

THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED

IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT

SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS

PERHUNDRED UNITS SHALL BE 2.5.

EXAMINE

DEFECT

MARKING ,,,,,,,,,,(EXTERIOR & UNIT PACKS)

,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,,

,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD

OF APPLICATION.

MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS

SPECIFIED.

WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,,

,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,

LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.

OPEN

AND NONCONTINUOUS HEAT SEALED SEAMS

AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,

,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED

CONTAINER.

GLOVES

NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE

CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.

CONTENT

NUMBER

OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN

REQUIRED.

PALLETIZATIONEXAMINATION.

THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE

EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE

SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.

THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY

PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN

TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.

EXAMINE

DEFECT

FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED

,,MAXIMUM REQUIREMENTS.

PALLETIZATION

,,PALLETPATTERN NOT AS SPECIFIED.

,,,,LOAD NOT BONDED AS SPECIFIED.

WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.

MARKING

OMITTED;

INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,

SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.

PALLETIZATION.

BOXES OF GLOVES, PACKED ASSPECIFIED,

SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH

WING-TYPE PALLET AND THE LOAD BONDED.

MARKING.

IN ADDITION TO ANYSPECIAL MARKING REQUIRED BY THE CONTRACT

PAGE 17 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLY/SERVICE: PGC: 01826 CONT'D

PARCEL POST ADDRESS:

UY0157

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

ITEM PR PRLI PR PRLI Material Need Ship Date .

0003 7018450425 0003 N/A N/A N/A 05/17/2027

SUPPLIES/SERVICES: PGC: 01826

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RD004: Cybersecurity Maturity Model Certification (CMMC)Level 2 Self-Assessment

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/ORQUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITYREQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THEREVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RD002, COVERED DEFENSEINFORMATION APPLIES

TYPE III ( GLOVES ONLY ), 7 MIL

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitionsmay refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as areplacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the StandardizationDocument Order

PAGE 18 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLY/SERVICE: PGC: 01826 CONT'D

Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available onlineat www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

RS062: Shelf life requirementRS001 for a TYPE 2 (CODE 9) item with a shelf life of 60 month (extendable) applies to

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS%

0004 8415-01-138-2502 800.000 PR $ ________________ $ ________________

GLOVES,CHEMICAL

PRO

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 163 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNNTHKNESS:0

UNIT CONT:ZZ OPI:O

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No specialmarking

TYPE II SHELF LIFE ITEM - SHELF LIFE 60 MONTHS.

Preservation and packaging shall be Level C/C in accordancewith ASTM-D3951. In addition, one pair of Type I chemical protective gloves with instruction sheet and one pair of cotton knittedgloves of matching size shall be unit packed in a flat plastic bag of 0.015 inch nominal thickness. Each pair of chemical protective gloves shall be positioned fingertip to cuff with the back side of each glove facing outward to permit the required markings to beread. The cotton gloves shall be sandwiched between the Type I chemical protective gloves. The polyethylene bag shall be formed with heat sealed seams that are straight, continuous, and parallel to each other and the formed edges of the bag. The final closure ofthe bag shall be heat sealed with the seal made as close as possible to the open end. The bag may be fabricated from thepolyethylene film tubing or sheeting. Prior to or during the closure operation, excess air within the bag shall be expelled.

Inaddition, seventy-two (72) glove sets of one size only shall be packed in a fiberboard shipping container conforming to styleRSC-L, type CF (variety SW) or SF, class domestic, grade 275 of ASTM- D1974 and ASTM-D5118. The inside of each shipping containershall be fitted with a box liner conforming to type CF, class domestic, variety DW, minimum grade 200 of ASTM-D1974 andASTM-D5118.

A Type VIII, Class 17 of MIL-DTL-32075 barcoded label shall be affixed to the outside of the individual bag.

MARKINGSHALL BE IN ACCORDANCE WITH

MIL-STD-129P.

SPECIAL MARKING CODE:

TYPE II SHELF LIFE MARKINGS.

DOD BAR CODE MARKING REQUIREDIN

ACCORDANCE WITH MIL-STD-129P.

PAGE 19 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLY/SERVICE: PGC: 01826 CONT'D

THE FULLY PACKAGED END ITEMS SHALL BE EXAMINED FOR

THE DEFECTS LISTED BELOW. THE LOT SIZE SHALL BE EXPRESSED

IN UNITS OF SHIPPING CONTAINERS. THE SAMPLE UNIT

SHALL BE S-2 AND THE AQL, EXPRESSED IN TERMS OF DEFECTS

PER HUNDREDUNITS SHALL BE 2.5.

EXAMINE

DEFECT

MARKING,,,,,,,,,,(EXTERIOR & UNIT PACKS)

,,,,,,OMITTED, INCORRECT, ILLLEGIBLE, OF ,,

,,,,,,,,,,,,,,IMPROPERSIZE, LOCATION, SEQUENCE OR ,,,,,,,,,,,,,,METHOD

OF APPLICATION.

MATERIALS ANY COMPONENT MISSING, DAMAGED OR NOT AS

SPECIFIED.

WORKMANSHIP INADEQUATE APPLICATION OF COMPONENTS ,,,,,,,,,,

,,,,SUCH AS:INCOMPLETESEALING CLOSURE OF ,,,,,,,,,,,,,,CONTAINER FLAP,

LOOSE STRAPPING, IMPROPER ,,,,,,,,,,,,TAPING OR INADEQUATE STAPLING.

OPEN

AND NONCONTINUOUS HEAT SEALED SEAMS

AND CLOSURE OF POLYETHYLENE BAG. ,,,,,,,,,,,,,,

,,INCORRECTLY FABRICATED BAG. BULGED OR ,,,,,,,,,,,,,,DISTORTED

CONTAINER.

GLOVES

NOT POSITIONED CUFF TO FINGERTIP,,,,,,,,,,,,,WITH BACK OF EACH GLOVE

CUFF NOT FACING ,,,,,,,,,,,,OUTWARD.

CONTENT

NUMBER

OF PAIRS OF GLOVES PER CONTAINER ,,,,,,,,,,,,IS MORE OR LESS THAN

REQUIRED.

PALLETIZATIONEXAMINATION.

THE FULLY PACKAGED AND PALLETIZED END ITEMS SHALL BE

EXAMINED FOR THE DEFECTS LISTED BELOW. THE LOT SIZE

SHALL BEEXPRESSED IN UNITS OF PALLETIZED UNIT LOADS.

THE SAMPLE UNIT SHALL BE ONE PALLETIZED UNIT LOAD FULLY

PACKAGED. THE INSPECTION LEVELSHALL BE S-1 AND THE AQL, EXPRESSED IN

TERMS OF DEFECTS PER HUNDRED UNITS, SHALL BE 6.5.

EXAMINE

DEFECT

FINISHED DIMENSIONS ,,LENGTH, WIDTH OR HEIGHT EXCEEDS SPECIFIED

,,MAXIMUM REQUIREMENTS.

PALLETIZATION

,,PALLETPATTERN NOT AS SPECIFIED.

,,,,LOAD NOT BONDED AS SPECIFIED.

WEIGHT ,,,,EXCEEDS MAXIMUM LOADLIMITS.

MARKING

OMITTED;

INCORRECT; ILLEGIBLE; OF,,,,,,,,,,,,,,,,IMPROPER SIZE, LCATION,

SEQUENCE OR ,,,,,,,,,,,,,,METHOD OF APPLICATION.

PACKAGING.

PALLETIZATION.

BOXES OFGLOVES, PACKED AS SPECIFIED,

SHALL BE PALLETIZED ON A 4-WAY ENTRY, 40X48 INCH

WING-TYPE PALLET AND THE LOAD BONDED.

MARKING.

INADDITION TO ANY SPECIAL MARKING REQUIRED BY THE CONTRACT

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:ZZ OPI:O

PACK CODE:U

PAGE 20 OF 83 PAGES

SPE1C1-27-Q-0172

SECTION B

SUPPLY/SERVICE: PGC: 01826 CONT'D

MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

TYPE II SHELF LIFE ITEM - SHELF LIFE 60 MONTHS.

Preservation andpackaging shall be Level C/C in accordance with ASTM-D3951.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .