Tech-data pgc03534-Final 1-28-20.docx

Tech-data PGC03534 1/28/2020

NSN-844015523648

SOCKS, BOOT, ANTIMICROBIAL,

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

SOCKS, BOOT, ANTIMICROBICAL SHALL BE

IN ACCORDANCE WITH CR/PD 03-18F

DATED 15 September 2017

TYPE III - BLACK 3237

PIECE NUMBER:06072

Packaging: NAVY TFU Sock for use at GT Lakes for issue of package of 5 pair rubberbanded

CARTON QTY: 5 PER PACK -24 PACKAGES OF 5 (120 PACKAGES)

Marking shall be in accordance with MIL-STD-129 and Notice 3.

Fiberboard shipping container conforming to ASTM-D-5118, Type CF, Style RSC-L (liner), Grade 275, variety SW, Class domestic Any commercial closure method cited in ASTM-D1974 is acceptable except stapling

AQLS SHALL BE AS FOLLOWS:

END ITEM DIMENSIONAL 4.0 - INSPECTION LEVEL S-3

VISUAL 4.0 - INSPECTION LEVEL II

Verification testing for the Antimicrobial properties specified on table I of CR/PD 13-18F shall be performed on a yearly basis by the Prime Contractor. The testing performed shall include initial and after 25 wash cycles per AATCC 100 for ATCC – 6538 -Staphylococcus Aureus and ATCC – 9027 -Pseudomonas Aeruginosa in accordance with table III of CR/PD 13-18F. The Prime Contractor shall have testing performed at a certified lab one year from the commencement of the contract. The test report shall be provided to the Contracting Officer.

Sampling: Applicable to Type III, black sock

For each delivery order, 6 pairs per month of production under the delivery order (any size of socks is acceptable) shall be presented monthly for testing at DLA-Troop Support. DLA-Troop Support reserves the right to use the socks for physical and /or shade evaluation. The contractor is to notify the contracting Officer 10 days prior to presentation in order for the Government QAR or other representative delegated by the Product Specialist or PCO to select which 6 pairs will be utilized from the monthly quantity (pool) . If we are not able or decline to be present, the contractor will submit samples to the Contracting Officer. If any of the samples are found to be unacceptable, the pool from which the samples were chosen may be rejected. The rejected pool shall then be screened without cost to the Government, and all defectives pieces removed. The screened pool shall be resubmitted and subjected to the same evaluation. This requirement does not negate the contractor's responsibility to perform evaluations and/or testing prior to submittal of a lot to the Government nor does it affect the conditions of one for one warranty or any other warranty specified in the contract. Delays caused by failure under this sampling paragraph ,if any, will be considered inexcusable unless the Contractor can clearly show that they are not at the fault of the contractor or of any of its subcontractors.

DLA Troop Support reserves their right to perform testing on an as needed basis.

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E

w/CHANGE 1 23 December 2013

SUPERSEDING

MIL-STD-147E

16 May 2008

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

Examination of packaging requirements. An examination shall be made to determine that packaging, packing, and marking comply with MIL-STD-129, MIL-STD-2073-1D, ASTM D5118, and ASTM D1974. Defects shall be scored in accordance with the list below. The sample unit shall be one shipping container fully prepared for delivery. The lot size shall be the number of shipping containers in the end item inspection lot. The inspection level shall be S-2 and the acceptable quality level (AQL) shall be 2.5, expressed in term of defects per hundred units.

Examine Defect

Marking Omitted,incorrect,illegible,of improper (Exterior and size, location,sequence, or method of interior) application.

Materials Any component missing, damaged, or not as specified.

Workmanship Inadequate application of components, such as: incomplete closure of flags, loose strapping, imprper taping, inadequate stapling, bulged or distorted containers.

Content Number of items per shipping container is more or less than required. Size shown on one or more items not as specified on shipping container. 1/

1/ For this defect, one item from each shipping container in the sample shall be examined.

PRESS/PACK/C/C TO ASTM -3951

5 PAIR TO A PACKAGE

Marking shall be in accordance with MIL-STD-129 and Notice 3.

Fiberboard shipping container conforming to ASTM-D-5118, Type CF, Style RSC-L (iner), Grade 275, variety SW, Class domestic Any commercial closure method cited in ASTM-D1974 is acceptable except stapling

252.211-7006 - RADIO FREQUENCY IDENTIFICATION (RFID) Required (ref. T8379; Nov. 08, 2006)

SIGNIFICANT NOTE - "PALLETIZATION IS REQUIRED FOR THESE SUPPLIES".

NOTE: THE FOLLOWING APPLIES TO ALL NON-MANUFACTURED WOOD PACKAGING MATERIALS:

"All Wood Packaging Material (WPM) acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo, or when wood is being acquired by DLA for future use as packaging material. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

Heat Treatment (HT) or Kiln Dried Heat Treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/; or

All WPM shall include certification/quality markings in accordance with the ALSC or NWPCA standards, as applicable. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible.

All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government."

PALLET SHALL BE 4 WAY ENTRY, WINGED TYPE. PALLETIZED LOAD DIMENSIONS SHALL NOT EXCEED 43 INCHES IN LENGTH, 52 INCHES IN WIDTH, AND 54 INCHES IN HEIGHT (INCLUDING THE PALLET).

THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED COMMERCIAL BONDING MATERIALS. THE USE OF METAL BANDING, IN SECURING BOXES TO PALLETS, IS DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO APPLIES:

52.247-9012 - REQUIREMENTS FOR TREATEMENT OF WOOD PACKAGING MATERIALS (WPM) - (JULY 2006)