Tech Data - MC Shirts.docx

SHIRT, WOMAN'S, TROPICAL, POLYESTER/WOOL, KHAKI SHADE M-1,

SHORT SLEEVES SHALL BE MADE IN ACCORDANCE WITH MIL-S-29368D

DATED 6 JUNE 1994

PATTERN DATE: MAY 4, 2011

STANDARD SAMPLE OF CLOTH, TROPICAL, POLYESTER &

WOOL, MIL-C-29404, MARINE CORPS KHAKI SHADE M-1,

IS APPLICABLE FOR SHADE, FINISH, HAND, PILLING

AND COLORFASTNESS - ROLL NO. 3875 APPLIES

INTERIM SPECIFICATION CHANGES TO MIL-S-29368D:

PAGE 1, PARA. 1.2, UNDER "TYPE I, CLASS 1",

DELETE "KHAKI SHADE 2122" AND SUBSTITUTE

"KHAKI SHADE M-1"; UNDER "TYPE II, CLASS 1",

DELETE "KHAKI SHADE 2122" AND SUBSTITUTE

"KHAKI SHADE M-1".

PAGE 4, PARA. 3.3.1.1, DELETE PARA. IN ITS

ENTIRETY AND SUBSTITUTE THE FOLLOWING:

"3.3.1.1 TYPE I, CLASS 1 AND TYPE II, CLASS 1.

THE BASIC MATERIAL SHALL BE 8.1 TO 8.9 OUNCE

TROPICAL POLYESTER/WOOL, KHAKI SHADE M-1,

CONFORMING TO TYPE III OF MIL-C-29404."

PAGE 4, PARA. 3.3.2, LINE 3, DELETE "CLASS 2"

AND SUBSTITUTE "CLASS 2 OR 3".

PAGE 4, PARA. 3.3.3, LINE 1, DELETE "TICKET

NO.70" AND SUBSTITUTE "TEX 31-35".

PAGE 4, PARA. 3.3.5, DELETE PARA. IN ITS

ENTIRETY AND SUBSTITUTE: "3.3.5 ELASTIC. THE

TYPE I, CLASS 2 SHIRT SHALL HAVE A COLLAR

CLOSURE LOOP MADE OF POLYESTER, NYLON, OR

COTTON, 1/8 TO 3/16 INCH WIDE, AND SHALL BE

WHITE IN COLOR. THE TYPE I, CLASS 1 AND

CLASS 3 AND THE TYPE II, CLASS 1 AND CLASS 2

SHIRTS SHALL HAVE A COLLAR CLOSURE LOOP MADE OF

POLYESTER, NYLON, OR COTTON, 1/8 TO 3/16 INCH

WIDE, AND SHALL MATCH THE COLOR OF THE SHIRT.

AS AN OPTION, FOR THE TYPE I, CLASS 1 AND

CLASS 3 AND THE TYPE II, CLASS 1 AND CLASS 2

SHIRTS, THE COLOR OF THE ELASTIC SHALL BE A

NATURAL OR CREAM COLOR OR BLACK."

PAGE 5, PARA. 3.3.6.2, LINES 2 AND 3, DELETE

"TABLE II, BODY DIMENSIONS FOR MARINE CORPS;

TABLE III, HEIGHT RANGES;" AND SUBSTITUTE

"TABLE II, HEIGHT RANGES; TABLE III, BODY

MEASUREMENTS FOR MARINE CORPS;".

PAGE 5, PARA. 3.3.6.3, DELETE AND SUBSTITUTE:

"BAR CODE LABEL/TAG. EACH ITEM SHALL BE

INDIVIDUALLY BAR CODED WITH A PAPER TAG FOR

PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE

TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A

BASIS WEIGHT OF 100 POUNDS. THE PAPER USED FOR

THE TAGS SHALL HAVE A SMOOTH FINISH TO ACCEPT

THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS

SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH

ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE

BY SCANNER. THE BAR CODING ELEMENT SHALL BE A

13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE

SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC)

ASSIGNED FOR ALL NSN'S BY THE GOVERNMENT. THE

INITIALS "UPC" MUST APPEAR BENEATH THE CODE.

THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM

TO HIGH DENSITY AND SHALL BE LOCATED SO THAT

THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT

IS FOLDED AND OR PACKAGED AS SPECIFIED. THE

LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE

ITEM. THE TAG SHALL BE PRINTED WITH A PERMANENT

INK SO THAT THE TAG SHALL NOT CAUSE A SPOT OR STAIN

ON THE GARMENT. THE INK SHALL NOT IN ANY WAY TRANSFER

ONTO THE GARMENT."

PAGE 11, TABLE I, OPER. 10(F), AT END OF PARA.

ADD THE FOLLOWING: "NOTE: WHEN USING BLACK

ELASTIC, THE ELASTIC SHALL BE POSITIONED TOWARDS

THE BACK SO THAT IT DOES NOT SHOW WHEN SHIRT

COLLAR IS WORN OPEN."

PAGE 17, ACROSS FROM "COLLAR LENGTH 3/" FOR SIZE

14, DELETE "14-1/4" AND SUBSTITUTE "14-1/2";

SIZE 16, DELETE "14-1/2" AND SUBSTITUTE "15";

SIZE 18, DELETE "14-3/4" AND SUBSTITUTE

"15-1/2".

PAGE 17, TABLE II FINISHED MEASUREMENTS (IN

INCHES), ACROSS FROM "COLLAR LENGTH 3/", UNDER

COLUMN FOR TOLERANCE, DELETE "-1/8" AND

SUBSTITUTE "+/-1/14".

PAGE 17, TABLE II FINISHED MEASUREMENTS (IN

INCHES), TYPE II LONG SLEEVE, ACROSS FROM

"SLEEVE LENGTH (R)" UNDER COLUMN FOR TOLERANCE,

DELETE "+/-1/4" AND SUBSTITUTE "+/-1/2".

PAGE 18, PARA. 4.5.2, LINE 4, DELETE "4.5.2.3"

AND SUBSTITUTE "4.5.2.4". LINE 4, DELETE

"ACCEPTABLE QUALITY LEVELS SHALL BE AS INDICATED

IN THE CONTRACT OR PURCHASE ORDER."

ALSO, ADD AT END OF PARA. THE FOLLOWING:

"AQL'S SHALL BE AS INDICATED IN 4.5.2.1 EXCEPT

THAT IF ONE OR MORE OF THE MAJOR DEFECTS FOUND

IN THE SAMPLE IS AN ASTERISK (*)DEFECT, IT SHALL

BE CAUSE FOR REJECTION OF THE LOT AS LISTED IN

TABLE III. THE SAMPLE UNIT SHALL BE ONE SHIRT.

. TABLE III. SAMPLING PROVISIONS FOR

. ASTERISK (*) DEFECTS

LOT SIZE SAMPLE SIZE MAX

. ACCEPTANCE NO. FOR

. SELECTED

. DEFECTS

UP TO 90 20 0

91 THRU 150 32 0

151 THRU 280 50 0

281 THRU 500 80 0

501 THRU 1200 125 1

1201 THRU 3200 200 1

3201 THRU 10,000 315 2

10,001 THRU 35,000 500 3

35,001 AND OVER 800 5

4.5.2.1 INSPECTION LEVELS AND AQL'S. THE

INSPECTION LEVEL AND AQL'S EXPRESSED IN

DEFECTS PER HUNDRED UNITS (DHU) SHALL BE

AS FOLLOWS:

. AQL INSPECTION

. LEVEL

1201 THRU 3200 200 1

3201 THRU 10,000 315 2

10,001 THRU 35,000 500 3

35,001 AND OVER 800 5

4.5.2.1 INSPECTION LEVELS AND AQL'S. THE

INSPECTION LEVEL AND AQL'S EXPRESSED IN

DEFECTS PER HUNDRED UNITS (DHU) SHALL BE

AS FOLLOWS:

. AQL INSPECTION

. LEVEL

FOR DEFECTS LISTED IN

4.5.2.2 AND 4.5.2.3 III

(GENERAL AND DETAILED

DEFECTS):

MAJOR 1.0

MAJOR AND MINOR A

(COMBINED) 4.0

TOTAL (MAJOR, MINOR A

AND MINOR B COMBINED) 10.0

FOR DEFECTS LISTED IN

4.5.2.4 (SIZE MEASUREMENTS) S-3

ONE CLASS 2.5

PAGE 19, DELETE "4.5.2 GENERAL DEFECTS." AND

SUBSTITUTE "4.5.2.2 GENERAL DEFECTS."

PAGE 24, AFTER PARA. 5.2.1, ADD THE FOLLOWING

PARA.: "5.2.2 LEVEL B. TWENTY (20) SHIRTS OF

ONE TYPE, CLASS AND SIZE ONLY, PACKAGED AS

SPECIFIED IN 5.1, SHALL BE PACKED IN A FIBER-

BOARD SHIPPING CONTAINER, CONFORMING TO TYPE CF,

CLASS DOMESTIC, VARIETY SW, GRADE 275, SIZE 1A

OF MIL-B-17757. EACH SHIPPING CONTAINER SHALL

BE ASSEMBLED AND CLOSED AS SPECIFIED IN THE

APPENDIX THERETO. BOX STYLE SHALL BE RSC-L WITH

A DOUBLE WALL LINER."

PAGE 24, PARA. 5.3, ADD THE FOLLOWING AT END OF

PARA.: "THE GOVERNMENT ASSIGNED UNIVERSAL

PRODUCT CODE (UPC) MUST BE PLACED ON ALL

SHIPPING CARTONS ON WHICH THE NSN APPEARS."

ADDITIONAL INFORMATION FOR V-B-871: NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR A-A-52094A THREAD, COTTON

NO ADDITIONAL INFORMATION

ADDITIONAL INFORMATION FOR NN-P-71:

NO ADDITIONAL INFORMATION FOLLOWS.

"MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR A-A-50135:

INTERIM SPECIFICATION CHANGES TO A-A-50135:

PARAGRAPH 2.1: DELETE AND SUBSTITUTE:

"2.1 CERTIFICATION. THE CONTRACTOR SHALL

CERTIFY AND MAINTAIN SUBSTANTIATING EVIDENCE

THAT THE PRODUCT OFFERED MEETS THE SALIENT

CHARACTERISTICS AND REQUIREMENTS OF THIS

COMMERCIAL ITEM DESCRIPTION AND THAT THE

PRODUCT CONFORMS TO THE PRODUCER'S OWN

DRAWINGS, SPECIFICATIONS, STANDARDS AND

QUALITY ASSURANCE PRACTICES. THE GOVERNMENT

RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH

CONFORMANCE PRIOR TO FIRST DELIVERY AND

THEREAFTER AS MAY BE OTHERWISE PROVIDED

FOR UNDER THE PROVISIONS OF THE CONTRACT.

PARA. 2.2 VISUAL EXAMINATION. LOTS OF CLOTH

SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD

-105. THE INSPECTION LEVEL SHALL BE II. THE LOT

SIZE SHALL BE EXPRESSED IN UNITS OF YARDS. THE

SAMPLE SIZE SHALL BE ONE LINEAR YARD. THE CLOTH

SHALL BE EXAMINED ON THE FACE SIDE FOR THE

FOLLOWING DEFECTS: HOLE, TEAR, RUN OR DROPPED

STITCH; END OUT; MEND; THIN OR UNEVEN AREA;

SLUB, SLUG OR GOUT; PERMANENT CREASE IN CLOTH;

SHADE BAR; STREAK, SPOT OR STAIN; WEIGHT NOT AS

SPECIFIED.

PARA. 2.3 LENGTH EXAMINATION. DURING THE YARD-

BY-YARD EXAMINATION EACH ROLL IN THE SAMPLE

SHALL BE EXAMINED FOR LENGTH AND WEIGHT. ANY

LENGTH FOUND TO BE LESS THAN THE MINIMUM

SPECIFIED OR MORE THAN 2 YARDS LESS THAN THE

LENGTH MARKED ON THE ROLL TICKET SHALL BE

CONSIDERED A LENGTH DEFECT. IF THE TOTAL OF THE

ACTUAL LENGTHS OF THE ROLLS IS LESS THAN THE

TOTAL OF THE LENGTHS MARKED ON THE ROLL TICKETS,

THE LOT SHALL BE REJECTED."

ADDITIONAL INFO FOR MIL-P-15011: NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT.

THE FOLLOWING DOCUMENTS ARE AUTHORIZED FOR USE IN LIEU

OF MIL-B-17757:

ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD SHIPPING CONTAINERS.

ADDITIONAL INFORMATION FOR MIL-C-29404:

STANDARD SAMPLE FOR MC SHADE 2122 IS IDENTIFIED

AS ROLL NO. 6-0983 AND REFERENCED FOR

SHADE, FINISH, HAND AND COLORFASTNESS

EXCEPT SELVAGE.

INTERIM SPECIFICATION CHANGES TO MIL-C-29404B:

PAGE 1, PARAGRAPH 1.2, CLASSIFICATION, LINE 3:

DELETE "TYPE I" AND SUBSTITUTE "TYPE III".

DELETE "2122" AND SUBSTITUTE "M-1".

PAGE 1, PARAGRAPH 1.2 CLASSIFICATION, LINE 4:

DELETE IN ITS ENTIRETY.

PAGE 3, PARAGRAPH 3.3.1.1.1 WOOL. LINES 2

AND 3: DELETE "NOT LOWER IN GRADE THAN 62'S

US. STANDARD FOR THE PIECE DYE".

PAGE 4, PARAGRAPH 3.3.2.1, POLYESTER/WOOL YARN.

LINE 3: DELETE "SINGLES" AND SUBSTITUTE "TWO-

PLY YARNS."

PAGE 4, PARAGRAPH 3.3.2.1, POLYESTER/WOOL YARN.

LINE 4: AFTER "FILLING." DELETE REMAINDER OF

PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE THE

FOLLOWING:

"THE FINISHED TOP DYED CLOTH SHALL CONTAIN

75% POLYESTER +/-3% AND 25% WOOL +/-3%

BASED ON THE OVEN-DRY WEIGHT, WHEN TESTED AS

SPECIFIED IN 4.5."

PAGE 4, PARAGRAPH 3.3.3, COLOR. DELETE

THE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE

THE FOLLOWING:

"THE COLOR FOR THE TYPE III CLOTH SHALL BE

KHAKI SHADE M-1. THE COLOR SHALL BE OBTAINED

BY TOP DYING AND SHALL MATCH THE STANDARD

SAMPLE(SEE 6.3). THE COLOR OF THE SELVAGE

SHALL APPROXIMATE THE COLOR OF THE CLOTH."

PAGE 4, PARAGRAPH 3.3.3.1, MATCHING, LINES 2

5, AND 6: DELETE "I OR TYPE II" AND SUBSTITUTE

"III".

PAGE 4, 3.4.1, PHYSICAL REQUIREMENTS. TABLE I:

UNDER THE COLUMN HEADED "YARNS PER INCH", UNDER

"WARP", DELETE "65" AND SUBSTITUTE "55", AND

UNDER "FILLING" DELETE "59" AND SUBSTITUTE

"47".

PAGE 5, PARAGRAPH 3.5, WEIGHT OF CLOTH. DELETE

THE FOLLOWING:

"PIECE DYED CLOTH (OUNCES)

MNIMUM MAXIMUM

6.5 7.0".

PAGE 5, PARAGRAPH 3.5, WEIGHT OF CLOTH. UNDER

THE HEADING "TOP DYED CLOTH (OUNCES)', UNDER

"MINIMUM", DELETE "6.3" AND SUBSTITUTE "8.1"

AND UNDER "MAXIMUM", DELETE "6.8" AND SUBSTITUTE

"8.9".

PAGE 5, PARAGRAPH 3.6, LENGTH AND PUT-UP,

LINE 4: DELETE "PPP-P-1132" AND SUBSTITUTE

"ASTM-D-3951."

PAGE 7, PARAGRAPH 4.4.2.1, LINE 1: AFTER

"YARD-BY-YARD EXAMINATION.", ADD "THE YARD

BY YARD EXAMINATION SHALL BE AS SPECIFIED

IN MIL-STD-655."

PAGE 7, PARAGRAPH 4.4.2.1, YARD-BY-YARD

EXAMINATION. LINE 5: AFTER "EXAMINED.", ADD

THE FOLLOWING SENTENCE: "THE QUALITY LEVEL

FOR THE CLOTH SHALL BE 12."

PAGE 8, PARAGRAPH 4.4.2.1, YARD-BY-YARD

EXAMINATION, FOOTNOTE 1/, LINE 4: AFTER

"SAMPLE." ADD "IF ONE ROLL OF CLOTH EXCEEDS

THE POINT LEVEL, A SECOND SAMPLE SHALL BE

EXAMINED ONLY FOR INDIVIDUAL ROLL QUALITY

EXAMINATION. THE LOT SHALL BE UNACCEPTABLE

IF ONE OR MORE ROLLS IN THE SECOND SAMPLE

EXCEEDS THE POINT LEVEL."

PAGE 8, AFTER PARAGRAPH 4.4.2.5, ADD THE

FOLLOWING NEW PARAGRAPH:

"4.4.2.6 LIMITS OF SLUBS AND KNOTS. ONLY

SLUBS AND KNOTS WHICH EXCEED "D" FOR SLUBS

AND "C" FOR KNOTS ON THE SEARS FABRIC DEFECT

SCALE SHALL BE SCORED (SEE 6.9)."

PAGE 9, TABLE III, TEST METHODS. DELETE ALL

REFERENCES TO "TYPE I" AND SUBSTITUTE "TYPE

III". DELETE IN ITS ENTIRETY ALL REFERENCES

TO 'TYPE II".

PAGE 11, PARAGRAPH 5.1, PUT-UP AND PACKAGING.

LINES 1 AND 2: DELETE "LEVEL A OR".

PAGE 12, PARAGRAPH 5.1.1, LINE 1: DELETE "LEVEL

A AND". LINES 2 AND 3" DELETE "PPP-P-1132" AND

SUBSTITUTE "ASTM-D-3951".

PAGE 12, PARAGRAPH 5.2, PACKING, LINE 1: DELETE

"LEVEL A OR".

PAGE 12, PARAGRAPH 5.2.1, LINE 1: DELETE "LEVEL

A OR". LINE 2: DELETE "PPP-P-1132", AND

SUBSTITUTE "ASTM-D-3951".

PAGE 12, PARAGRAPH 6.2.C., LINE 1: AFTER

"REQUIRED" DELETE THE SECOND SENTENCE IN ITS

ENTIRETY AND SUBSTITUTE: "SPECIFY NUMBER AND

TEXTURE (SEE 1.2 AND 3.5)."

PAGE 13, PARAGRAPH 6.5, ACCEPTANCE CRITERIA.

LINE 4: DELETE "20" AND SUBSTITUTE "12".

LINE 6: DELETE "33" AND SUBSTITUTE "18".

PAGE 13, ADD THE FOLLOWING NEW PARAGRAPH:

"6.9 SEARS FABRIC DEFECT SCALES ARE AVAILABLE

FROM SEARS, ROEBUCK AND COMPANY, DEPARTMENT 87,

(ATTENTION: BSC-23-29), "FABRIC DEFECTS REPLICA

KIT", CHICAGO, ILLINOIS 60694."

ADDITIONAL INFORMATION FOR MIL-C-44296:

INTERIM SPECIFICATION CHANGES TO MIL-C-44296A:

PAGE 1, PARAGRAPH 1.1, SCOPE., LINE 1: AFTER "AND" INSERT "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2, LINE 12: BETWEEN "TYPE X-CIRCULAR KNIT SUBSTRATE" AND "CLASS 1" INSERT "TYPE X1- "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2. CLASSIFICATION. BELOW "TYPE IX" ADD "TYPE X - CIRCULAR KNIT SUBSTRATE"

PAGE 2, PARAGRAPH 2. APPLICABLE DOCUMENTS ADD FOLLOWING NEW PARAGRAPH: "2.1.3 OTHER PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A PART OF THIS DOCUMENT TO THE EXTENT SPECIFIED HEREIN. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS WHICH ARE DOD ADOPTED SHALL BE THOSE LISTED IN THE ISSUE OF THE DODISS SPECIFIED IN THE SOLICITATION. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS NOT LISTED IN THE DODISS SHALL BE THE ISSUES OF THE NONGOVERNMENT DOCUMENTS WHICH ARE CURRENT ON THE DATE OF THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC 20 - FIBER ANALYSIS QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC), P.O. BOX 12215, TRIANGLE PARK, NC 27709-2215)"

PAGE 3, ADD THE FOLLOWING NEW PARAGRAPH: "3.1.2.10 TYPE X. TYPE X SHALL BE A CIRCULAR KNIT. WHEN SPECIFIED (SEE 6.2), THE FACE SIDE SHALL BE NAPPED."

PAGE 3: AFTER PARAGRAPH 3.1.2.10,ADD THE FOLLOWING: "3.1.2.11 TYPE X1. TYPE X1 SHALL BE STITCH- REINFORCED NONWOVEN WHEREBY A SERIES OF CHAINSTITCHING IS SEWN IN THE MACHINE DIRECTION OF THE SUBSTRATE IN ORDER TO REINFORCE THE NONWOVEN CONSTRUCTION."

PAGE 7, PARAGRAPH 3.4. PHYSICAL REQUIREMENTS. ADD THE FOLLOWING NEW TABLE AFTER TABLE VII:

"TABLE VII. A PHYSICAL REQUIREMENTS FOR TYPE X

STYLE CLASS WEIGHT (INCLUDING BURSTING

ADHESIVE) STRENGTH

OZ/SQ/YD. LBS. (MIN.

MINIMUM MAXIMUM

A 1,2,3 OR 4 1.4 1.8 60

FIBER CONTENT

1/

1/ 100% NYLON OR POLYESTER."

PAGE 7,PARAGRAPH 3.4 PHYSICAL REQUIREMENTS.: AFTER TABLE"V111" ADD NEW TABLE 1X:

"TABLE 1X,PHYSICAL REQUIREMENTS FOR TYPE X1

BREAKING STRENGTH

WGT, OZ/YD2 LBS, (MIN) STITCHING

STYLE CLASS MIN MAX MACH X-MACH CONTENT REIN

FORCEMENT

A 1,2,3 1.0 1.8 10.0 1.0 1/ 2/

1/ 50 TO 100 PERCENT POLYESTER WITH REMAINING PERCENTAGE NYLON OR RAYON.

2/ STITCH REINFORCEMENT CONDUCTED WITH SINGLE MULTIFILAMENT THREAD USING CHAINSTITCH STITCH TYPE WITH CHAINSTITCH LOOPS ON FUSIBLE SIDE TO PROTECT FROM UNRAVELING."

PAGE 7, PARAGRAPH 3.4.1. BONDING STRENGTH.

- LINE 2, DELETE "(EXCEPT CLASS 5)" AND SUBSTITUTE "(EXCEPT TYPE IX WHEN USED AS FUSIBLE SEAM TAPE AND CLASS 5)".

- LINES 7 AND 8, DELETE "OR SHEETING MATERIAL".

PAGE 9, PARA. 4.2.2.1, LINE 22, DELETE "30" AND SUBSTITUTE "20". LINE 24, DELETE "45" AND SUBSTITUTE "30".

PAGE 11, TABLE VIII. END ITEM TESTS UNDER TEST METHOD COLUMN, LINES 2 AND 3 DELETE "1600" AND SUBSTITUTE "AATCC 20".

PAGE 12, PARAGRAPH 4.3.1.1. BONDING STRENGTH PROCEDURE (INITIAL AND AFTER LAUNDERING/DRY CLEANING). DELETE THE FIRST AND SECOND SENTENCES IN THEIR ENTIRETY AND SUBSTITUTE: "CUT A 12 INCH WARP BY 11 INCH FILLING SAMPLE FROM BOTH THE OUTERSHELL AND FUSIBLE MATERIALS SPECIFIED FOR CONTRACT USE (SEE 6.5)."

PAGE 15: AT THE END OF PARAGRAPH 6.1.1,ADD THE FOLLOWING:

" E. STITCH REINFORCED NONWOVEN TYPE X1 OFFERS HIGH DEGREE STRENGTH/STABILIZATION FOR TAPE AND STAY APPLICATION FOR LARGE OR SMALL PART FUSIBLES AND IS INTENDED TO PROVIDE VERTICAL STABILITY AND ABRASION RESISTANCE."

PAGE 16, PARAGRAPH 6.5. BONDING STRENGTH DISPUTE PROCEDURE. INSERT THE FOLLOWING BETWEEN THE FIRST AND SECOND SENTENCES: "IN SOME CASES, OUTERSHELL SAMPLES REPRESENTATIVE OF SEPARATE PRODUCTION LOTS MAY BE USED TO DETERMINE IF DIFFERENT FINISHES MAY AFFECT BONDING STRENGTH."

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE".

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED. THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE."

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER."

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40 MINUTES OR UNTIL SAMPLES ARE DRY."

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLE UNIT". PAGE 1, PARA. 4: DELETE "APPARTUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA. 5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY".

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER "TO" ADD "+-".

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500 VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT NECESSARY."

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE SPECIMEN DID" IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED."

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE: "REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS."

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE."

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE WITH "406D".

AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY FOR THE TEST."

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN

CANCELLED AND REPLACED BY ASTM-D-6193, 4/98

STANDARD PRACTICES FOR STITCHES AND SEAMS.

THIS STANDARD SHOULD BE USED IN PREFERENCE

TO FED-STD-751.

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED: 27 SEPTEMBER 2019

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E w/CHANGE 2

27 JUNE 2019

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

ADDITIONAL INFORMATION FOR MIL-STD-984:

MIL-STD-984A: PROVISION FOR SIZE LABELING FOR

WOMEN'S UNIFORM CLOTHING 13 SEPT 1994.

EACH WOMAN'S ITEM SHALL HAVE A SEPARATE

SIZE LABEL CONFORMING TO TYPE VI CLASS 2 OF

MIL-DTL-32075 AND BODY DIMENSION LABELING

REQUIREMENT CONFORMING TO MIL-STD-984. THE

LABEL SHALL INDICATE SIZE, BODY DIMENSIONS,

AND STOCK NUMBER AS SHOWN BELOW:

FOR DRESS COATS:

SIZE CODE: 12JP (EXAMPLE)

BUST CIRC: 37-1/2 (EXAMPLE)

HIP CIRC: 38 (EXAMPLE)

HEIGHT: LESS THAN 63 1/2 (P) (EXAMPLE)

FOR SLACKS AND SKIRTS:

SIZE CODE: 12 JP (EXAMPLE)

WAIST CIRC: 29-1/2 (EXAMPLE)

HIP CIRC: 38 (EXAMPLE)

HEIGHT: LESS THAN 63 1/2 (P) (EXAMPLE)

PAGE 5, TABLE 1, ADD THE FOLLOWING SIZES:

HEIGHT: LESS THAN 63 1/2 (P) (EXAMPLE)

STOCK NO: 8410-00-000-0000 (EXAMPLE)

NOTE: ABBREVIATIONS FOR THE APPLICABLE BODY TYPE

SHALL BE "J" FOR JUNIORS , "M" FOR MISSES AND

"W" FOR WOMEN'S.

ABBREVIATIONS FOR THE APPLICABLE LENGTHS SHALL

BE "P" FOR PETITE, "R" FOR REGULAR, AND "T" FOR

TALL.

NOTE: THE INFORMATION FOR EACH SIZE LABEL IS

CONTAINED IN MIL-STD-984 AND IS NOT TO BE

CONFUSED WITH THE FINISHED DIMENSIONS OF THE END

ITEM IN THE SPECIFICATION.

INTERIM CHANGES TO MIL-STD-984:

PAGE 5, TABLE I, DELETE IN ITS ENTIRETY AND

SUBSTITUTE THE FOLLOWING:

SIZE CODE BUST CIRC WAIST CIRC HIP CIRC

INCHES INCHES INCHES INCHES

2M 31-1/2 23-1/2 34 4J 32-1/2 24-1/2 33 4M 32-1/2 24-1/2 35 4W 32-1/2 24-1/2 37 6J 33-1/2 25-1/2 34 6M 33-1/2 25-1/2 36 6W 33-1/2 25-1/2 38 8J 34-1/2 26-1/2 35 8M 34-1/2 26-1/2 37 8W 34-1/2 26-1/2 39 10J 36 28 36-1/2 10M 36 28 38-1/2 10W 36 28 40-1/2 12J 37-1/2 29-1/2 38 12M 37-1/2 29-1/2 40 12W 37-1/2 29-1/2 42 14J 39 31 39-1/2 14M 39 31 41-1/2 14W 39 31 43-1/2 16J 41 33 41-1/2 16M 41 33 43-1/2 16W 41 33 45-1/2 18J 43 35 43-1/2 18M 43 35 45-1/2 18W 43 35 47-1/2 20J 45 37 45-1/2 20M 45 37 47-1/2 20W 45 37 49-1/2 22J 47 39 47-1/2 22M 47 39 49-1/2 22W 47 39 51-1/2 24J 49 41 49-1/2 24M 49 41 51-1/2 24W 49 41 53-1/2 26J 51 43 51-1/2 26M 51 43 53-1/2 26W 51 43 55-1/2 28J 53 45 53-1/2 28M 53 45 55-1/2 28W 53 45 57-1/2

PACKAGING

PRES/PACK LEVELS A/B TO MIL-S-29368

MARKING IAW MIL-STD-129 & MILL-HDBK-129

GOVERNMENT ASSIGNED UNIVERSAL PRODUCT

CODE (UPC) MUST BE PLACED ON ALL SHIPPING

CARTONS ON WHICH THE NSN APPEARS.

SIGNIFICANT NOTE - "PALLETIZATION IS REQUIRED FOR THESE SUPPLIES".

NOTE: THE FOLLOWING APPLIES TO ALL NON-MANUFACTURED WOOD PACKAGING MATERIALS:

"All Wood Packaging Material (WPM) acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo, or when wood is being acquired by DLA for future use as packaging material. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

Heat Treatment (HT) or Kiln Dried Heat Treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/; or

All WPM shall include certification/quality markings in accordance with the ALSC or NWPCA standards, as applicable. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible.

All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government."

PALLET SHALL BE 4 WAY ENTRY, WINGED TYPE. PALLETIZED LOAD DIMENSIONS SHALL NOT EXCEED 43 INCHES IN LENGTH, 52 INCHES IN WIDTH, AND 54 INCHES IN HEIGHT (INCLUDING THE PALLET).

THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED COMMERCIAL BONDING MATERIALS. THE USE OF METAL BANDING, IN SECURING BOXES TO PALLETS, IS DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO APPLIES:

52.247-9012 - REQUIREMENTS FOR TREATEMENT OF WOOD PACKAGING MATERIALS (WPM) - (JULY 2006)

SHIRT, WOMAN'S, TROPICAL, POLYESTER/WOOL, KHAKI SHADE M-1, LONG SLEEVES

SHALL BE MADE IN ACCORDANCE WITH MIL-S-29368D DATED 6 JUNE 1994

PATTERN DATE: MAY 4, 2011

STANDARD SAMPLE OF CLOTH, TROPICAL: POLYESTER

AND WOOL, MIL-C-29404, MARINE CORPS KHAKI SHADE

M-1, IS APPLICABLE FOR SHADE, FINISH, HAND,

PILLING AND COLORFASTNESS - ROLL NO. 3875

APPLIES

INTERIM SPECIFICATION CHANGES TO MIL-S-29368D:

PAGE 1, PARA. 1.2, UNDER "TYPE I, CLASS 1",

DELETE "KHAKI SHADE 2122" AND SUBSTITUTE

"KHAKI SHADE M-1"; UNDER "TYPE II, CLASS 1",

DELETE "KHAKI SHADE 2122" AND SUBSTITUTE

"KHAKI SHADE M-1".

PAGE 4, PARA. 3.3.1.1,DELETE PARA. IN ITS

ENTIRETY AND SUBSTITUTE THE FOLLOWING:

"3.3.1.1 TYPE I, CLASS 1 AND TYPE II, CLASS 1.

THE BASIC MATERIAL SHALL BE 8.1 TO 8.9 OUNCE

TROPICAL POLYESTER/WOOL, KHAKI SHADE M-1,

CONFORMING TO TYPE III OF MIL-C-29404."

PAGE 4, PARA. 3.3.2, LINE 3, DELETE "CLASS 2"

AND SUBSTITUTE "CLASS 2 OR 3".

PAGE 4, PARA. 3.3.3, LINE 1, DELETE "TICKET

NO. 70" AND SUBSTITUTE "TEX 31-35".

PAGE 4, PARA. 3.3.5, DELETE PARA. IN ITS

ENTIRETY AND SUBSTITUTE: "3.3.5 ELASTIC. THE

TYPE I, CLASS 2 SHIRT SHALL HAVE A COLLAR

CLOSURE LOOP MADE OF POLYESTER, NYLON, OR

COTTON, 1/8 TO 3/16 INCH WIDE, AND SHALL BE

WHITE IN COLOR. THE TYPE I, CLASS 1 AND

CLASS 3 AND THE TYPE II, CLASS 1 AND CLASS 2

SHIRTS SHALL HAVE A COLLAR CLOSURE LOOP MADE OF

POLYESTER, NYLON, OR COTTON, 1/8 TO 3/16 INCH

WIDE, AND SHALL MATCH THE COLOR OF THE SHIRT.

AS A OPTION, FOR THE TYPE I, CLASS 1 AND

CLASS 3 AND THE TYPE II, CLASS 1 AND CLASS 2

SHIRTS, THE COLOR OF THE ELASTIC SHALL BE A

NATURAL OR CREAM COLOR, OR BLACK."

PAGE 5, PARA. 3.3.6.2, LINES 2 AND 3, DELETE

"TABLE II, BODY DIMENSIONS FOR MARINE CORPS;

TABLE III, HEIGHT RANGES;" AND SUBSTITUTE

"TABLE II, HEIGHT RANGES; TABLE III, BODY

MEASUREMENTS FOR MARINE CORPS;".

PAGE 5, PARA. 3.3.6.3, DELETE AND SUBSTITUTE THE

FOLLOWING: "BAR CODE LABEL/TAG. EACH ITEM

SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG

FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR

THE TAGS SHALL BE STANDARD BLEACHED SULFATE

HAVING A BASIS WEIGHT OF 100 POUNDS. THE PAPER

USED FOR THE TAGS SHALL HAVE A SMOOTH FINISH TO

ACCEPT THERMAL TRANSFER AND DIRECT PRINTING.

THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED

TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND

READABLE BY SCANNER. THE BAR CODING ELEMENT

SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN).

THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE

(UPC) ASSIGNED FOR ALL NSN'S BY THE GOVERNMENT.

THE INITIALS "UPC" MUST APPEAR BENEATH THE CODE.

THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM

TO HIGH DENSITY AND SHALL BE LOCATED SO THAT

THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT

IS FOLDED AND OR PACKAGED AS SPECIFIED. THE

LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE

ITEM. THE TAG SHALL BE PRINTED WITH A PERMANENT

INK SO THAT THE TAG SHALL NOT CAUSE A SPOT OR STAIN

ON THE GARMENT. THE INK SHALL NOT IN ANY WAY TRANSFER

ONTO THE GARMENT."

PAGE 11, TABLE I, OPER. 10(F), AT END OF PARA.

ADD THE FOLLOWING: "NOTE: WHEN USING BLACK

ELASTIC, THE ELASTIC SHALL BE POSITIONED TOWARDS

THE BACK SO THAT IT DOES NOT SHOW WHEN SHIRT

COLLAR IS WORN OPEN."

PAGE 17, ACROSS FROM "COLLAR LENGTH 3/" FOR SIZE

14, DELETE "14-1/4" AND SUBSTITUTE "14-1/2";

SIZE 16, DELETE "14-1/2" AND SUBSTITUTE "15";

SIZE 18, DELETE "14-3/4" AND SUBSTITUTE

"15-1/2"

PAGE 17, TABLE II FINISHED MEASUREMENTS (IN

INCHES), ACROSS FROM "COLLAR LENGTH 3/",

UNDER COLUMN FOR TOLERANCE, DELETE "-1/8" AND

SUBSTITUTE "+/-1/4".

PAGE 17, TABLE II FINISHED MEASUREMENTS (IN

INCHES), TYPE II LONG SLEEVE, ACROSS FROM

"SLEEVE LENGTH (R)" UNDER COLUMN FOR TOLERANCE,

DELETE "+/-1/4" AND SUBSTITUTE "+/-1/2".

PAGE 18, PARA. 4.5.2, LINE 4, DELETE "4.5.2.3"

AND SUBSTITUTE "4.5.2.4". LINE 4, DELETE

"ACCEPTABLE QUALITY LEVELS SHALL BE AS INDICATED

IN THE CONTRACT OR PURCHASE ORDER."

ALSO, ADD AT END OF PARA. THE FOLLOWING:

"AQL'S SHALL BE AS INDICATED IN 4.5.2.1 EXCEPT

THAT IF ONE OR MORE OF THE MAJOR DEFECTS FOUND

IN THE SAMPLE IS AN ASTERISK(*) DEFECT, IT SHALL

BE CAUSE FOR REJECTION OF THE LOT AS LISTED IN

TABLE III. THE SAMPLE UNIT SHALL BE ONE SHIRT.

. TABLE III. SAMPLING PROVISIONS FOR

. ASTERISK (*) DEFECTS

LOT SIZE SAMPLE SIZE MAX

. ACCEPTANCE NO. FOR

. SELECTED

. DEFECTS

UP TO 90 20 0

91 THRU 150 32 0

151 THRU 280 50 0

281 THRU 500 80 0

501 THRU 1200 125 1

1201 THRU 3200 200 1

3201 THRU 10,000 315 2

10,001 THRU 35,000 500 3

35,001 AND OVER 800 5

4.5.2.1 INSPECTION LEVELS AND AQL'S. THE

INSPECTION LEVELS AND AQL'S EXPRESSED IN

DEFECTS PER HUNDRED UNITS (DHU) SHALL BE

AS FOLLOWS:

. AQL INSPECTION

. LEVEL

FOR DEFECTS LISTED IN

4.5.2.2 AND 4.5.2.3 III

(GENERAL AND DETAILED

DEFECTS):

MAJOR 1.0

MAJOR AND MINOR A

(COMBINED) 4.0

TOTAL (MAJOR, MINOR A

AND MINOR B COMBINED) 10.0

FOR DEFECTS LISTED IN

4.5.2.4 (SIZE MEASUREMENTS) S-3

ONE CLASS 2.5

PAGE 19, DELETE "4.5.2 GENERAL DEFECTS." AND

SUBSTITUTE "4.5.2.2 GENERAL DEFECTS."

PAGE 24, AFTER PARA. 5.2.1, ADD THE FOLLOWING

PARA.: "5.2.2 LEVEL B. TWENTY (20) SHIRTS OF

ONE TYPE, CLASS AND SIZE ONLY, PACKAGED AS

SPECIFIED IN 5.1, SHALL BE PACKED ON A FIBER-

BOARD SHIPPING CONTAINER, CONFORMING TO TYPE CF,

CLASS DOMESTIC, VARIETY SW, GRADE 275, SIZE 1A

OF MIL-B-17757. EACH SHIPPING CONTAINER SHALL

BE ASSEMBLED AND CLOSED AS SPECIFIED IN THE

APPENDIX THERETO. BOX STYLE SHALL BE RSC-L WITH

A DOUBLE WALL LINER."

PAGE 24, PARA. 5.3, ADD THE FOLLOWING AT END OF

PARA.: "THE GOVERNMENT ASSIGNED UNIVERSAL

PRODUCT CODE (UPC) MUST BE PLACED ON ALL

SHIPPING CARTONS ON WHICH THE NSN APPEARS."

INCLUDE T1721 OBJECT TEXT ID ST

ADDITIONAL INFORMATION FOR A-A-52094A THREAD, COTTON

NO ADDITIONAL INFORMATION

ADDITIONAL INFORMATION FOR NN-P-71:

NO ADDITIONAL INFORMATION FOLLOWS..

"MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR A-A-50135:

INTERIM SPECIFICATION CHANGES TO A-A-50135:

PARAGRAPH 2.1: DELETE AND SUBSTITUTE:

"2.1 CERTIFICATION. THE CONTRACTOR SHALL

CERTIFY AND MAINTAIN SUBSTANTIATING EVIDENCE

THAT THE PRODUCT OFFERED MEETS THE SALIENT

CHARACTERISTICS AND REQUIREMENTS OF THIS

COMMERCIAL ITEM DESCRIPTION AND THAT THE

PRODUCT CONFORMS TO THE PRODUCER'S OWN

DRAWINGS, SPECIFICATIONS, STANDARDS AND

QUALITY ASSURANCE PRACTICES. THE GOVERNMENT

RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH

CONFORMANCE PRIOR TO FIRST DELIVERY AND

THEREAFTER AS MAY BE OTHERWISE PROVIDED

FOR UNDER THE PROVISIONS OF THE CONTRACT.

PARA. 2.2 VISUAL EXAMINATION. LOTS OF CLOTH

SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD

-105. THE INSPECTION LEVEL SHALL BE II. THE LOT

SIZE SHALL BE EXPRESSED IN UNITS OF YARDS. THE

SAMPLE SIZE SHALL BE ONE LINEAR YARD. THE CLOTH

SHALL BE EXAMINED ON THE FACE SIDE FOR THE

FOLLOWING DEFECTS: HOLE, TEAR, RUN OR DROPPED

STITCH; END OUT; MEND; THIN OR UNEVEN AREA;

SLUB, SLUG OR GOUT; PERMANENT CREASE IN CLOTH;

SHADE BAR; STREAK, SPOT OR STAIN; WEIGHT NOT AS

SPECIFIED.

PARA. 2.3 LENGTH EXAMINATION . DURING THE YARD-

BY-YARD EXAMINATION EACH ROLL IN THE SAMPLE

SHALL BE EXAMINED FOR LENGTH AND WEIGHT. ANY

LENGTH FOUND TO BE LESS THAN THE MINIMUM

SPECIFIED OR MORE THAN 2 YARDS LESS THAN THE

LENGTH MARKED ON THE ROLL TICKET SHALL BE

CONSIDERED A LENGTH DEFECT. IF THE TOTAL OF THE

ACTUAL LENGTHS OF THE ROLLS IS LESS THAN THE

TOTAL OF THE LENGTHS MARKED ON THE ROLL TICKETS,

THE LOT SHALL BE REJECTED."

ADDITIONAL INFO FOR MIL-P-15011: NO ADDITIONAL INFORMATION FOLLOWS.

THE FOLLOWING DOCUMENTS ARE AUTHORIZED FOR USE IN LIEU

OF MIL-B-17757:

ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD SHIPPING CONTAINERS

ADDITIONAL INFORMATION FOR MIL-C-29404:

STANDARD SAMPLE FOR MC SHADE 2122 IS IDENTIFIED

AS ROLL NO. 6-0983 AND REFERENCED FOR

SHADE, FINISH, HAND AND COLORFASTNESS

EXCEPT SELVAGE.

INTERIM SPECIFICATION CHANGES TO MIL-C-29404B:

PAGE 1, PARAGRAPH 1.2, CLASSIFICATION, LINE 3:

DELETE "TYPE I" AND SUBSTITUTE "TYPE III".

DELETE "2122" AND SUBSTITUTE "M-1".

PAGE 1, PARAGRAPH 1.2 CLASSIFICATION, LINE 4:

DELETE IN ITS ENTIRETY.

PAGE 3, PARAGRAPH 3.3.1.1.1 WOOL. LINES 2

AND 3: DELETE "NOT LOWER IN GRADE THAN 62'S

US. STANDARD FOR THE PIECE DYE".

PAGE 4, PARAGRAPH 3.3.2.1, POLYESTER/WOOL YARN.

LINE 3: DELETE "SINGLES" AND SUBSTITUTE "TWO-

PLY YARNS."

PAGE 4, PARAGRAPH 3.3.2.1, POLYESTER/WOOL YARN.

LINE 4: AFTER "FILLING." DELETE REMAINDER OF

PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE THE

FOLLOWING:

"THE FINISHED TOP DYED CLOTH SHALL CONTAIN

75% POLYESTER +/-3% AND 25% WOOL +/-3%

BASED ON THE OVEN-DRY WEIGHT, WHEN TESTED AS

SPECIFIED IN 4.5."

PAGE 4, PARAGRAPH 3.3.3, COLOR. DELETE

THE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE

THE FOLLOWING:

"THE COLOR FOR THE TYPE III CLOTH SHALL BE

KHAKI SHADE M-1. THE COLOR SHALL BE OBTAINED

BY TOP DYING AND SHALL MATCH THE STANDARD

SAMPLE(SEE 6.3). THE COLOR OF THE SELVAGE

SHALL APPROXIMATE THE COLOR OF THE CLOTH."

PAGE 4, PARAGRAPH 3.3.3.1, MATCHING, LINES 2

5, AND 6: DELETE "I OR TYPE II" AND SUBSTITUTE

"III".

PAGE 4, 3.4.1, PHYSICAL REQUIREMENTS. TABLE I:

UNDER THE COLUMN HEADED "YARNS PER INCH", UNDER

"WARP", DELETE "65" AND SUBSTITUTE "55", AND

UNDER "FILLING" DELETE "59" AND SUBSTITUTE

"47".

PAGE 5, PARAGRAPH 3.5, WEIGHT OF CLOTH. DELETE

THE FOLLOWING:

"PIECE DYED CLOTH (OUNCES)

MNIMUM MAXIMUM

6.5 7.0".

PAGE 5, PARAGRAPH 3.5, WEIGHT OF CLOTH. UNDER

THE HEADING "TOP DYED CLOTH (OUNCES)', UNDER

"MINIMUM", DELETE "6.3" AND SUBSTITUTE "8.1"

AND UNDER "MAXIMUM", DELETE "6.8" AND SUBSTITUTE

"8.9".

PAGE 5, PARAGRAPH 3.6, LENGTH AND PUT-UP,

LINE 4: DELETE "PPP-P-1132" AND SUBSTITUTE

"ASTM-D-3951."

PAGE 7, PARAGRAPH 4.4.2.1, LINE 1: AFTER

"YARD-BY-YARD EXAMINATION.", ADD "THE YARD

BY YARD EXAMINATION SHALL BE AS SPECIFIED

IN MIL-STD-655."

PAGE 7, PARAGRAPH 4.4.2.1, YARD-BY-YARD

EXAMINATION. LINE 5: AFTER "EXAMINED.", ADD

THE FOLLOWING SENTENCE: "THE QUALITY LEVEL

FOR THE CLOTH SHALL BE 12."

PAGE 8, PARAGRAPH 4.4.2.1, YARD-BY-YARD

EXAMINATION, FOOTNOTE 1/, LINE 4: AFTER

"SAMPLE." ADD "IF ONE ROLL OF CLOTH EXCEEDS

THE POINT LEVEL, A SECOND SAMPLE SHALL BE

EXAMINED ONLY FOR INDIVIDUAL ROLL QUALITY

EXAMINATION. THE LOT SHALL BE UNACCEPTABLE

IF ONE OR MORE ROLLS IN THE SECOND SAMPLE

EXCEEDS THE POINT LEVEL."

PAGE 8, AFTER PARAGRAPH 4.4.2.5, ADD THE

FOLLOWING NEW PARAGRAPH:

"4.4.2.6 LIMITS OF SLUBS AND KNOTS. ONLY

SLUBS AND KNOTS WHICH EXCEED "D" FOR SLUBS

AND "C" FOR KNOTS ON THE SEARS FABRIC DEFECT

SCALE SHALL BE SCORED (SEE 6.9)."

PAGE 9, TABLE III, TEST METHODS. DELETE ALL

REFERENCES TO "TYPE I" AND SUBSTITUTE "TYPE

III". DELETE IN ITS ENTIRETY ALL REFERENCES

TO 'TYPE II".

PAGE 11, PARAGRAPH 5.1, PUT-UP AND PACKAGING.

LINES 1 AND 2: DELETE "LEVEL A OR".

PAGE 12, PARAGRAPH 5.1.1, LINE 1: DELETE "LEVEL

A AND". LINES 2 AND 3" DELETE "PPP-P-1132" AND

SUBSTITUTE "ASTM-D-3951".

PAGE 12, PARAGRAPH 5.2, PACKING, LINE 1: DELETE

"LEVEL A OR".

PAGE 12, PARAGRAPH 5.2.1, LINE 1: DELETE "LEVEL

A OR". LINE 2: DELETE "PPP-P-1132", AND

SUBSTITUTE "ASTM-D-3951".

PAGE 12, PARAGRAPH 6.2.C., LINE 1: AFTER

"REQUIRED" DELETE THE SECOND SENTENCE IN ITS

ENTIRETY AND SUBSTITUTE: "SPECIFY NUMBER AND

TEXTURE (SEE 1.2 AND 3.5)."

PAGE 13, PARAGRAPH 6.5, ACCEPTANCE CRITERIA.

LINE 4: DELETE "20" AND SUBSTITUTE "12".

LINE 6: DELETE "33" AND SUBSTITUTE "18".

PAGE 13, ADD THE FOLLOWING NEW PARAGRAPH:

"6.9 SEARS FABRIC DEFECT SCALES ARE AVAILABLE

FROM SEARS, ROEBUCK AND COMPANY, DEPARTMENT 87,

(ATTENTION: BSC-23-29), "FABRIC DEFECTS REPLICA

KIT", CHICAGO, ILLINOIS 60694."

ADDITIONAL INFORMATION FOR MIL-C-44296:

INTERIM SPECIFICATION CHANGES TO MIL-C-44296A:

PAGE 1, PARAGRAPH 1.1, SCOPE., LINE 1: AFTER "AND" INSERT "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2, LINE 12: BETWEEN "TYPE X-CIRCULAR KNIT SUBSTRATE" AND "CLASS 1" INSERT "TYPE X1- "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2. CLASSIFICATION. BELOW "TYPE IX" ADD "TYPE X - CIRCULAR KNIT SUBSTRATE"

PAGE 2, PARAGRAPH 2. APPLICABLE DOCUMENTS ADD FOLLOWING NEW PARAGRAPH: "2.1.3 OTHER PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A PART OF THIS DOCUMENT TO THE EXTENT SPECIFIED HEREIN. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS WHICH ARE DOD ADOPTED SHALL BE THOSE LISTED IN THE ISSUE OF THE DODISS SPECIFIED IN THE SOLICITATION. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS NOT LISTED IN THE DODISS SHALL BE THE ISSUES OF THE NONGOVERNMENT DOCUMENTS WHICH ARE CURRENT ON THE DATE OF THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC 20 - FIBER ANALYSIS QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC), P.O. BOX 12215, TRIANGLE PARK, NC 27709-2215)"

PAGE 3, ADD THE FOLLOWING NEW PARAGRAPH: "3.1.2.10 TYPE X. TYPE X SHALL BE A CIRCULAR KNIT. WHEN SPECIFIED (SEE 6.2), THE FACE SIDE SHALL BE NAPPED."

PAGE 3: AFTER PARAGRAPH 3.1.2.10,ADD THE FOLLOWING: "3.1.2.11 TYPE X1. TYPE X1 SHALL BE STITCH- REINFORCED NONWOVEN WHEREBY A SERIES OF CHAINSTITCHING IS SEWN IN THE MACHINE DIRECTION OF THE SUBSTRATE IN ORDER TO REINFORCE THE NONWOVEN CONSTRUCTION."

PAGE 7, PARAGRAPH 3.4. PHYSICAL REQUIREMENTS. ADD THE FOLLOWING NEW TABLE AFTER TABLE VII:

"TABLE VII. A PHYSICAL REQUIREMENTS FOR TYPE X

STYLE CLASS WEIGHT (INCLUDING BURSTING

ADHESIVE) STRENGTH

OZ/SQ/YD. LBS. (MIN.

MINIMUM MAXIMUM

A 1,2,3 OR 4 1.4 1.8 60

FIBER CONTENT

1/

1/ 100% NYLON OR POLYESTER."

PAGE 7,PARAGRAPH 3.4 PHYSICAL REQUIREMENTS.: AFTER TABLE"V111" ADD NEW TABLE 1X:

"TABLE 1X,PHYSICAL REQUIREMENTS FOR TYPE X1

BREAKING STRENGTH

WGT, OZ/YD2 LBS, (MIN) STITCHING

STYLE CLASS MIN MAX MACH X-MACH CONTENT REIN

FORCEMENT

A 1,2,3 1.0 1.8 10.0 1.0 1/ 2/

1/ 50 TO 100 PERCENT POLYESTER WITH REMAINING PERCENTAGE NYLON OR RAYON.

2/ STITCH REINFORCEMENT CONDUCTED WITH SINGLE MULTIFILAMENT THREAD USING CHAINSTITCH STITCH TYPE WITH CHAINSTITCH LOOPS ON FUSIBLE SIDE TO PROTECT FROM UNRAVELING."

PAGE 7, PARAGRAPH 3.4.1. BONDING STRENGTH.

- LINE 2, DELETE "(EXCEPT CLASS 5)" AND SUBSTITUTE "(EXCEPT TYPE IX WHEN USED AS FUSIBLE SEAM TAPE AND CLASS 5)".

- LINES 7 AND 8, DELETE "OR SHEETING MATERIAL".

PAGE 9, PARA. 4.2.2.1, LINE 22, DELETE "30" AND SUBSTITUTE "20". LINE 24, DELETE "45" AND SUBSTITUTE "30".

PAGE 11, TABLE VIII. END ITEM TESTS UNDER TEST METHOD COLUMN, LINES 2 AND 3 DELETE "1600" AND SUBSTITUTE "AATCC 20".

PAGE 12, PARAGRAPH 4.3.1.1. BONDING STRENGTH PROCEDURE (INITIAL AND AFTER LAUNDERING/DRY CLEANING). DELETE THE FIRST AND SECOND SENTENCES IN THEIR ENTIRETY AND SUBSTITUTE: "CUT A 12 INCH WARP BY 11 INCH FILLING SAMPLE FROM BOTH THE OUTERSHELL AND FUSIBLE MATERIALS SPECIFIED FOR CONTRACT USE (SEE 6.5)."

PAGE 15: AT THE END OF PARAGRAPH 6.1.1,ADD THE FOLLOWING:

" E. STITCH REINFORCED NONWOVEN TYPE X1 OFFERS HIGH DEGREE STRENGTH/STABILIZATION FOR TAPE AND STAY APPLICATION FOR LARGE OR SMALL PART FUSIBLES AND IS INTENDED TO PROVIDE VERTICAL STABILITY AND ABRASION RESISTANCE."

PAGE 16, PARAGRAPH 6.5. BONDING STRENGTH DISPUTE PROCEDURE. INSERT THE FOLLOWING BETWEEN THE FIRST AND SECOND SENTENCES: "IN SOME CASES, OUTERSHELL SAMPLES REPRESENTATIVE OF SEPARATE PRODUCTION LOTS MAY BE USED TO DETERMINE IF DIFFERENT FINISHES MAY AFFECT BONDING STRENGTH."

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE".

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED. THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE."

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER."

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40 MINUTES OR UNTIL SAMPLES ARE DRY."

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLE UNIT". PAGE 1, PARA. 4: DELETE "APPARTUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA. 5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY".

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER "TO" ADD "+-".

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500 VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT NECESSARY."

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE SPECIMEN DID" IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED."

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE: "REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS."

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE."

AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY FOR THE TEST."

STANDARD PRACTICES FOR STITCHES AND SEAMS.

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED: 27 SEPTEMBER 2019

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E w/CHANGE 2

27 JUNE 2019

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

ADDITIONAL INFORMATION FOR MIL-STD-984:

MIL-STD-984A: PROVISION FOR SIZE LABELING FOR

WOMEN'S UNIFORM CLOTHING 13 SEPT 1994.

EACH WOMAN'S ITEM SHALL HAVE A SEPARATE

SIZE LABEL CONFORMING TO TYPE VI CLASS 2 OF

MIL-DTL-32075 AND BODY DIMENSION LABELING

REQUIREMENT CONFORMING TO MIL-STD-984. THE

LABEL SHALL INDICATE SIZE, BODY DIMENSIONS,

AND STOCK NUMBER AS SHOWN BELOW:

FOR DRESS COATS:

SIZE CODE: 12JP (EXAMPLE)

BUST CIRC: 37-1/2 (EXAMPLE)

HIP CIRC: 38 (EXAMPLE)

HEIGHT:…