Labeling_Instructions-G1_Jacket_Figures.pdf

LABEL INSTRUCTIONS FOR DLA TROOP SUPPORT LOGO

(Enclosure 1)

The following item requires enhanced labeling as specified below. The DLA logo and all labeling shall be in accordance with the graphic depictions attached here in.

The product line name shall be as specified below, dependent upon the service ownership of end item being manufactured under this contract.

SERVICE PRODUCT LINE NAME

Navy Q uarterdeck C ollection

The font styles specified below shall be followed for all labels: DLA sewn in labels, and hang tags.

FONT STYLE

Product Line Name, First Letter of each word Kunstler Script, Bold (i.e. W, D, C, Q)

Product Line Name, All except first letter Calibri ( i.e. ollection)

DLA websites Calibri, Italicized (i.e. http://dod)

Tag line (“..THE PERFECT FIT”) Perpetua Titling MT, Bold (i.e. perfect)

Made in U.S.A Elephant (i.e. U.S.A.)

Additional Wording on reverse of poly bag Times New Roman (i.e. To Place an order)

Note: Spacing of Product line Name: Add a space after first letter before second letter of each word.

LABEL INSTRUCTIONS FOR DLA TROOP SUPPORT LOGO

ITEM

POLY BAG

DLA

SEWN-IN LABELS

DLA

TAGS

Jackets Plain Large Hang Tag

Large Label

Label Dimension*

3 inches Wide by 3 inches High

Label Color

White

Border

4 ½ point, Pantone # 296 (Blue), ¼ inch from all edges

NOTE: All Label dimensions shall have a 1/8 inch tolerance

Example of Large-End fold label. Background shall be white. Product line in example is for a Navy item. Adjust Product Line Name dependent upon Service ownership.

NOTE: Broken line indicates stitching line for attachment to end item.

LABEL INSTRUCTIONS FOR DLA TROOP SUPPORT LOGO

Attachment of labels:

The large –end fold DLA label for Coats, Overcoats, Jackets, and Jumpers shall be lock stitched on all four sides 1/8 inch from edge.

Labels shall be positioned as specified below:

Item Placement

Jackets (including utility jackets)

The large size DLA label shall be centered ½ inch below combination identification size label and stitched through lining only on all four sides.

HANG TAGS

Tag Dimension 4” H x 3” W

Tag Color White

Tag Spec 8 point weight, coated on both sides

Border 4 ½ point, PMS # 296 (Blue), front and reverse, ¼” from all edges

LABEL INSTRUCTIONS FOR DLA TROOP SUPPORT LOGO

HANG TAG PLACEMENT

Coats, Jackets, Jumpers, and Coveralls Attach near bottom of left sleeve.

Example of Front of DLA Hang Tag. Product line in example is for an Army item.

Adjust Product Line Name dependent upon Service ownership

LABEL INSTRUCTIONS FOR DLA TROOP SUPPORT LOGO

G arrison

C ollection

Example of Back of DLA hang tag for all product line names.

MADE IN U.S.A.

INFORMATION:

http://www.dscp.dla.mil/clothingandtextiles/

ORDERING:

https://dod‐emall.dla.mil

DLA Customer Interaction Center:

http://www.dlis.dla.mil/cust.asp

LABEL INSTRUCTIONS FOR DLA TROOP SUPPORT LOGO

PMS color numbers shall be as specified below:

PMS Color Numbers

DLA websites PMS # 296 (Blue))

Product line name (e.g., Garrison Collection) PMS # 296 (Blue)

Tag line (“…the perfect fit”) PMS # 296 (Blue)

DLA logo PMS # 296 (Blue)

All Wording on reverse of hang tag and poly bag PMS # 296 (Blue)

LABEL INSTRUCTIONS FOR DLA TROOP SUPPORT LOGO

Enlargement of DLA LOGO.

Enclosure 2. Figures as follows:

FIGURE 15. KNIT CUFF

REQUIREMENTS:

Dimensions and weight for eyelet:

A = 0.200 (± 0.004) INCHES

B = 0.300 (± 0.007) INCHES

C = 0.177 (± 0.003) INCHES

F = 0.026 (± 0.026) INCHES

W = 0.205 (± 0.005) INCHES

L = 0.213 (± 0.005) INCHES

WT LB/1000 (MINIMUM) = 0.591

Dimensions for washer:

T = 0.020 (+ 0.004, -0.002) INCHES

D = 0.450 (± 0.003) INCHES

R = 0.220 (± 0.002) INCHES

Material for eyelet and washer shall be brass.

Eyelet and washer shall have a black chemical finish.

FIGURE 16. Eyelet and washer