ITEM_DESCRIPTION.pdf

The blouse, woman's, service, khaki shall be made in accordance with NCTRF-PD 06-06B dated 19 June 2007.

Pattern date: 6 march 2008

Standard sample of cloth, tropical: polyester and wool, shade 3729, is available and applicable for shade only under piece no. 06081 Interim changes to NCTRF-PD 06-06B:

Page 3, paragraph 3.2.1.1.1, line 2, after "template," insert "The finished buttonhole template shall be aligned at the finished neckline using the corresponding size and length template."

Page 4, paragraph 3.2.1.6, line 3, after "body fabric" insert "shall be locked at the beginning and end of the stitch".

Page 4, paragraph 3.3.2, line 3, after "polyester)" add: "except the weight shall be a minimum 2.2 oz/yd square."

Page 4, paragraph 3.3.2, lines 3 and 4, delete "The interlinings shall be to the top ply of all components and shall be natural or approximate the color of the basic material." and substitute "The interlinings shall be to the top ply of all components and shall be khaki, white or neutral in color."

Page 4, paragraph 3.3.3, lines 2 and 3, delete: "The thread color shall be Khaki P-1, Cable no. 66019 in accordance with DoD Standard Shades for Sewing Threads." and substitute: "The thread color shall match the basic material, NCTRF PD 04-06, Class 2.".

Page 4, paragraph 3.3.4, line 1, delete "and pocket flaps".

Page 5, paragraph 3.3.5.1, lines 8 and 9, delete and substitute:

"NAME_______________________

Page 6, Table I, List of Pattern Parts, delete and substitute the following:

"PIECE NAME SPEC NAME CUT # COMMENTS

Basic Material:

CENTR_FRNT Center front 2 SIDE_FRONT Side front 2 CENTR_BACK Center back 1 SIDE_BACK Side back 2 SLEEVE Sleeve 2 COLLAR Collar 2 COLLAR_STD Collarstand 2 Templates:

BHLMKR ** Buttonhole marker TEMPLATE V-FINTEMPL * V-Finished opening TEMPLATE Interlining:

FRTFACINT Front facing interlining 2 COLLARINT Collar interlining 1 COLSTDINT Collarstand interlining 1

*All sizes and lengths

**Present the adjusted requirements.

Page 6, paragraph 3.4, lines 7 and 8, delete "The Government patterns provides for a 1/4 inch seam allowance for all seams without trimming, unless otherwise specified."

and substitute "The pattern provides a 5/16 inch seam allowance for safety stitched seams and a 1/4 inch seam allowance for all other seams."

Page 8, paragraph 3.6, Table II, delete and substitute:

"TABLE II - Finished dimensions for blouse A B C D E E E E E Collar 1/2 1/2 1/2 Ctr. Ctr Ctr Ctr Ctr Bust Sweep Waist Back Back Back Back Back Length Length Length Length Lgth Lgth Lgth Lgth Petite Reg. Tall X-Tall XX Tall Size

4 12-1/2 18-1/4 19 14-3/4 22 23-1/4 24-1/2 25-3/4 27

6 12-3/4 18-3/4 19-1/2 15-1/4 22-1/8 23-3/8 24-5/8 25-7/8 27- 1/8 8 13 19-1/4 20 15-3/4 22-1/4 23-1/2 24-3/4 26 27- 1/4 10 13-1/4 20 20-3/4 16-1/2 22-3/8 23-5/8 24-7/8 26-1/8 27- 3/8 12 13-1/2 20-3/4 21-1/2 17-1/4 22-1/2 23-3/4 25 26-1/4 27- 1/2 14 13-3/4 21-1/2 22-1/4 18 22-5/8 23-7/8 25-1/8 26-3/8 27- 5/8 16 14 22-1/2 23-1/4 19 22-3/4 24 25-1/4 26-1/2 27- 3/4 18 14-1/4 23-1/2 24-1/4 20 22-7/8 24-1/8 25-3/8 26-5/8 27- 7/8 20 14-1/2 24-1/2 25-1/4 21 23 24-1/4 25-1/2 26-3/4 28

22 14-3/4 25-1/2 26-1/4 22 23-1/8 24-3/8 25-5/8 26-7/8 28- 1/8

24 15 26-1/2 27-1/4 23 23-1/4 24-1/2 25-3/4 27 28- 1/4

26 15-1/4 27-1/2 28-1/4 24 23-3/8 24-5/8 25-7/8 27-1/8 28- 3/8

Tol. +/-1/4 +/-3/8 +/-1/2 +/-1/2 +/-1/4 +/-1/4 +/-1/4 +/-1/4+/-1/4

F Sleeve Length 1/

Petite 3-1/8 Regular 3-5/8 Tall 4-1/8 X-Tall 4-1/8

XX-Tall 4-5/8

Tolerance +/-1/4 Page 12, paragraph 4.4.3, Table VII, add new "Appearance" defect: "d.11.

Blindstitching on blouse not locked at beginning and end of stitch." Defect point value is "3".

Page 18, delete "Figure 3" and substitute revised "Figure 3".

COMMERCIAL

ADDITIONAL INFORMATION FOR A-A-50135:

INTERIM SPECIFICATION CHANGES TO A-A-50135:

PARAGRAPH 2.1: DELETE AND SUBSTITUTE:

"2.1 CERTIFICATION. THE CONTRACTOR SHALL

CERTIFY AND MAINTAIN SUBSTANTIATING EVIDENCE

THAT THE PRODUCT OFFERED MEETS THE SALIENT

CHARACTERISTICS AND REQUIREMENTS OF THIS

COMMERCIAL ITEM DESCRIPTION AND THAT THE

PRODUCT CONFORMS TO THE PRODUCER'S OWN

DRAWINGS, SPECIFICATIONS, STANDARDS AND

QUALITY ASSURANCE PRACTICES. THE GOVERNMENT

RESERVES THE RIGHT TO REQUIRE PROOF OF SUCH

CONFORMANCE PRIOR TO FIRST DELIVERY AND

THEREAFTER AS MAY BE OTHERWISE PROVIDED

FOR UNDER THE PROVISIONS OF THE CONTRACT.

PARA. 2.2 VISUAL EXAMINATION. LOTS OF CLOTH

SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD

-105. THE INSPECTION LEVEL SHALL BE II. THE LOT

SIZE SHALL BE EXPRESSED IN UNITS OF YARDS. THE

SAMPLE SIZE SHALL BE ONE LINEAR YARD. THE CLOTH

SHALL BE EXAMINED ON THE FACE SIDE FOR THE

FOLLOWING DEFECTS: HOLE, TEAR, RUN OR DROPPED

STITCH; END OUT; MEND; THIN OR UNEVEN AREA;

SLUB, SLUG OR GOUT; PERMANENT CREASE IN CLOTH;

SHADE BAR; STREAK, SPOT OR STAIN; WEIGHT NOT AS

SPECIFIED.

PARA. 2.3 LENGTH EXAMINATION . DURING THE YARD-

BY-YARD EXAMINATION EACH ROLL IN THE SAMPLE

SHALL BE EXAMINED FOR LENGTH AND WEIGHT. ANY

LENGTH FOUND TO BE LESS THAN THE MINIMUM

SPECIFIED OR MORE THAN 2 YARDS LESS THAN THE

LENGTH MARKED ON THE ROLL TICKET SHALL BE

CONSIDERED A LENGTH DEFECT. IF THE TOTAL OF THE

ACTUAL LENGTHS OF THE ROLLS IS LESS THAN THE

TOTAL OF THE LENGTHS MARKED ON THE ROLL TICKETS,

THE LOT SHALL BE REJECTED."

ADDITIONAL INFORMATION FOR V-B-871: NO ADDITIONAL INFORMATION FOLLOWS.

MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 4, PARA. 3.3.5, AFTER "TYPE III OR IV, CLASS 4 OF" DELETE "DDD-L-20" AND REPLACE

"MIL-DTL-32075,".

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR MIL-STD-1492C:

MIL-STD-1492C, PAGES 7-8, TABLE II, DELETE IN

ITS ENTIRETY AND SUBSTITUTE: "TABLE II

SAMPLING PROVISIONS FOR END ITEM VISUAL

EXAMINATION OF SEMI-DRESS (SD) SHIRTS

NORMAL INSPECTION

LOT SZ SAMP SZ MAX ACCP PT VALUES

. 3&2 PT 3,2,1 PT

. DEFECTS DEFECTS

UP THRU 500 50 5 10

501-1200 80 7 14 1201-3200 125 10 20 3201-10,000 200 14 29 10,001-35,000 315 20 42

35,001 & OVER 500 30 62

TIGHTENED INSPECTION

UP THRU 500 50 3 7

501-1200 80 5 11 1201-3200 125 7 15 3201-10,000 200 11 23 10,001-35,000 315 17 34

35,001 & 0VER 500 25 52

REDUCED INSPECTION

LOT SZ SAMP SZ MAX ACCP PT VALUES

. 3&2 PT 3,2,1 PT

. DFCTS 1/ DEFECTS

UP THRU 1200 32 3-7 11

1201-3200 50 5-9 14 3201-10,000 80 7-11 19 10,001-35,000 125 10-14 24

35,001 & OVER 200 14-18 34

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND

VALUE HAS NOT BEEN EXCEEDED, ACCEPT THE LOT BUT

REINSTATE NORMAL INSPECTION (SEE 5.5.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT

VALUE."

CLOTH, TROPICAL: POLYESTER AND WOOL, CLASS 1 and 2

ADDITIONAL INFORMATION FOR NTCRF PD 04-06, CLASS 1:

STANDARD SAMPLE FOR CLOTH, TROPICAL: POLYESTER AND WOOL, BLUE 3346 CONFORMING TO

NCTRF PD 04-06, IS AVAILABLE ON ROLL NO. 10163, AND APPLICABLE FOR SHADE, FINISH AND

COLORFASTNESS.

ADDITIONAL INFORMATION FOR NTCRF PD 04-06, CLASS 2:

STANDARD SAMPLE FOR CLOTH, TROPICAL: POLYESTER AND WOOL, KHAKI 3729 CONFORMING TO NCTRF PD 04-06, IS AVAILABLE ON ROLL NO. 06081, AND APPLICABLE FOR SHADE, FINISH AND

COLORFASTNESS.

RECOMMEND 100 PERCENT SHADE VERIFICATION FOR EACH LOT PRESENTED TO GOVERNMENT FOR LIFE

OF THE ITEM.

MIL-STD-129 CURRENT REVISION UNLESS OTHERWISE SPECIFIED

- DEPARTMENT OF DEFENSE STANDARD PRACTICE

- MILITARY MARKING FOR SHIPMENT AND STORAGE

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL

BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS,

REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS

"PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS:

MIL-STD-147E DEPARTMENT OF DEFENSE

16 MAY 2008 STANDARD PRACTICE

PALLETIZED UNIT LOADS

STANDARDS (COMMERCIAL)

ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets.

DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS.

PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH 2000

Examination of packaging requirements. An examination shall be made to determine that packaging, packing, and marking comply with MIL-STD-129, MIL-STD-2073-1D, ASTM D5118, and ASTM D1974. Defects shall be scored in accordance with the list below. The sample unit shall be one shipping container fully prepared for delivery. The lot size shall be the number of shipping containers in the end item inspection lot. The inspection level shall be S-2 and the acceptable quality level (AQL) shall be 2.5, expressed in term of defects per hundred units.

Examine Defect

Marking Omitted,incorrect,illegible,of improper (Exterior and size, location,sequence, or method of interior) application.

Materials Any component missing, damaged, or not as specified.

Workmanship Inadequate application of components, such as: incomplete closure of flags, loose strapping, imprper taping, inadequate stapling, bulged or distorted containers.

Content Number of items per shipping container is more or less than required. Size shown on one or more items not as specified on shipping container. 1/

1/ For this defect, one item from each shipping container in the sample shall be examined..

NEXCOM LABELING ONLY: Each shirt/blouse shall have a non-curl label approximately 1- 1/2" X 1-1/2" sewn inside at neck. "Classic" or "Athletic" shall be clearly identified in 12pt. font (include bust measurement on female over blouse), a UPC stick-on label approximately 2" X 2-1/2", and placed on the right front bottom of the bag including NSN and size as specified.

RECRUIT TRAINING CENTER (RTC) - Each shirt/blouse shall also be packed in a plastic bag. Heat sealing of the bag is prohibited.

Refer to the packaging data for specific information relating to this item.