Drawings__Buildings_17 _27 _30 _11_ _306 _and_DLO_Wages_Determination.pdf

PDF 32 MB Posted

Attached to
CSC-16729 " Convert Fire Protection Antifreeze Loop to Dry System"
Solicitation number
SP4702-16-R-0011
Issued by

About this file

Drawings 17 27 30 11 306 and DOL Wages Determination

View the file

Other files

File Type Posted
SP470216R00110001.pdf PDF
SP470215R0011.pdf PDF
Drawings_Building_9_and_10.pdf PDF
SP470215R0011.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SP4702-16-R-0011, PAGE # 142, "Building 17" ATTACHMENT 2

SP4702-16-R-0011, PAGE # 143, Building # 17 ATTACHMENT 2

SP4702-16-R-0011, Page #144 ATTACHMENT 2

SP4702-16-R-0011, Page #145 ATTACHMENT 2

SP4702-16-R-0011, Page #146 ATTACHMENT 2

SP4702-16-R-0011, Page #147 ATTACHMENT 2

SP4702-16-R-0011, Page #148 ATTACHMENT 2

SP4702-16-R-0011, Page #149 ATTACHMENT 2

SP4702-16-R-0011, Page #150 ATTACHMENT 2

SP4702-16-R-0011, Page #151 ATTACHMENT 2

SP4702-16-R-0011, Page #152, Building 11, Sections 1 & 2 ATTACHMENT 2

SP4702-16-R-0011, Page #153 ATTACHMENT 2

SP4702-16-R-0011, Page #154 ATTACHMENT 2

General Decision Number: OH160099 03/18/2016 OH99

Superseded General Decision Number: OH20150099

State: Ohio

Construction Type: Building

County: Franklin County in Ohio.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Davis-Bacon Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/08/2016 1 01/15/2016 2 01/22/2016 3 02/05/2016 4 02/19/2016 5 03/18/2016

ASBE0008-010 07/01/2015

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR........................$ 29.40 14.77

BROH0055-006 06/01/2015

Rates Fringes

BRICKLAYER.......................$ 28.12 15.80

BROH0055-007 07/01/2015

Rates Fringes

TILE FINISHER....................$ 25.76 4.79

TILE SETTER......................$ 26.31 4.79

CARP0200-003 06/01/2014

Rates Fringes

SP4702-16-R-0011, Page #155ATTACHMENT 3

CARPENTER (Soft Floor Layer and Floor Laying - Hardwood Floors Only).....................$ 25.57 13.25

CARP0200-004 06/01/2014

Rates Fringes

CARPENTER (Excludes Acoustical Ceiling Installation)....................$ 25.57 13.25

ELEC0038-004 04/28/2014

Rates Fringes

ELECTRICIAN (HVAC/Temperature Controls Installation Only)......$ 36.78 19.72

FOOTNOTES;

a. 6 Paid Holidays: New Year's Day; Memorial Day; July 4th;

Labor Day; Thanksgiving Day; & Christmas Day

b. 1 week's paid vacation for 1 year's service; 2 weeks' paid vacation for 2 or more years' service

ELEC0683-004 06/02/2014

Rates Fringes

ELECTRICIAN (Low Voltage Wiring Only).....................$ 24.88 8.97

ELEC0683-007 06/02/2014

Rates Fringes

ELECTRICIAN (Excludes Installation of HVAC/Temperature Controls and Low Voltage Wiring)..............$ 30.85 15.85

ELEV0037-003 01/01/2016

Rates Fringes

ELEVATOR MECHANIC................$ 42.03 29.985+a+b

PAID HOLIDAYS:

a. New Year's Day, Memorial Day, Independence Day, Labor Day, Vetern's Day, Thanksgiving Day, the Friday after Thanksgiving, and Christmas Day.

b. Employer contributes 8% of regular hourly rate to vacation pay credit for employee who has worked in business more than 5 years; 6% for less than 5 years' service.

ENGI0018-043 05/01/2015

SP4702-16-R-0011, Page #156ATTACHMENT 3

POWER EQUIPMENT OPERATOR

Backhoe/Excavator/Trackhoe;

Bobcat/Skid Steer/Skid Loader; Concrete Pump;

Crane.......................$ 33.04 14.25 Bulldozer...................$ 32.92 14.25 Oiler.......................$ 25.24 14.25

ENGI0066-048 06/01/2014

Rates Fringes

POWER EQUIPMENT OPERATOR

Grader/Blade................$ 31.02 17.51 Mechanic....................$ 31.52 17.51

IRON0172-006 06/01/2015

Rates Fringes

IRONWORKER (Reinforcing and Structural)......................$ 28.12 19.14

IRON0550-009 05/01/2015

Rates Fringes

IRONWORKER, ORNAMENTAL...........$ 26.66 18.36

LABO0423-003 06/01/2014

Rates Fringes

LABORER

Mason Tender - Brick & Cement/Concrete.............$ 23.89 9.75

PAIN1275-001 11/01/2015

Rates Fringes

PAINTER (Spray)..................$ 25.20 11.26

PLUM0189-005 06/01/2013

Rates Fringes

PIPEFITTER.......................$ 34.08 20.06

* SFOH0669-009 01/01/2016

Rates Fringes

SPRINKLER FITTER (Fire Sprinklers)......................$ 33.83 19.99

SHEE0024-028 06/01/2015

SP4702-16-R-0011, Page #157ATTACHMENT 3

SHEET METAL WORKER (Excludes HVAC Duct and Unit Installation)....................$ 27.41 19.08

SUOH2012-080 08/29/2014

Rates Fringes

ABATEMENT WORKER: ASBESTOS

(Removal from Ceilings, Floors, and Walls)...............$ 22.74 9.25

CARPENTER (Acoustical Ceiling Installation Only)...............$ 24.17 8.61

CEMENT MASON/CONCRETE FINISHER...$ 26.07 12.34

DRYWALL FINISHER/TAPER...........$ 20.81 5.27

DRYWALL HANGER AND METAL STUD

INSTALLER........................$ 21.75 3.11

GLAZIER..........................$ 22.60 11.02

LABORER: Common or General......$ 21.90 8.60

LABORER: Landscape & Irrigation.......................$ 22.18 8.15

LABORER: Pipelayer..............$ 23.98 8.58

OPERATOR: Forklift..............$ 22.79 12.76

OPERATOR: Loader................$ 29.66 12.61

OPERATOR: Paver (Asphalt, Aggregate, and Concrete).........$ 30.28 13.29

OPERATOR: Roller................$ 28.83 12.72

PAINTER (Brush and Roller).......$ 23.87 9.42

PLUMBER..........................$ 25.74 6.45

ROOFER...........................$ 25.33 11.37

SHEET METAL WORKER (HVAC Duct and HVAC Unit Installation Only)............................$ 26.26 17.79

TRUCK DRIVER: Dump (All Types)...$ 24.32 11.73

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

SP4702-16-R-0011, Page #158ATTACHMENT 3

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

SP4702-16-R-0011, Page #159ATTACHMENT 3

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

SP4702-16-R-0011, Page #160ATTACHMENT 3

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

SP4702-16-R-0011, Page #161ATTACHMENT 3

SCOPE OF WORK
FOR
CONVERT FIRE PROTECTION ANTIFREEZE LOOP TO DRY SYSTEM
PROJECTS CSC-16729
02/10
GENERAL REQUIREMENTS AND SCOPE OF WORK
PART 1 GENERAL
1.1 REFERENCES
1.2 SYSTEM DESCRIPTION
1.2.1 Hydraulic Design
1.2.1.1 Hose Demand
1.2.1.2 Basis for Calculations
1.2.2 Sprinkler Coverage
1.2.3 System Volume Limitations
1.3 SUBMITTALS
1.4 QUALITY ASSURANCE
1.4.1 Fire Protection Specialist
1.4.2 Installer Qualifications
1.4.3 Shop Drawings
1.5 DELIVERY, STORAGE, AND HANDLING
1.6 EXTRA MATERIALS
PART 2 PRODUCTS
2.1 STANDARD PRODUCTS
2.2 NAMEPLATES
2.3 REQUIREMENTS FOR FIRE PROTECTION SERVICE
2.4 UNDERGROUND PIPING COMPONENTS
2.4.1 Pipe
2.4.2 Fittings and Gaskets
2.4.3 Gate Valve and Indicator Post
2.5 ABOVEGROUND PIPING COMPONENTS
2.5.1 Steel Pipe
2.5.2 Fittings for Non-Grooved Steel Pipe
2.5.3 Grooved Mechanical Joints and Fittings
2.5.4 Flanges
2.5.4.1 Bolts
2.5.4.2 Nuts
2.5.4.3 Washers
2.5.5 Pipe Hangers
2.5.6 Valves
2.5.6.1 Control Valve and Gate Valve
2.5.6.2 Check Valve
2.6 DRY PIPE VALVE ASSEMBLY
2.7 SUPERVISORY AIR SYSTEM
Provide an air supply system in accordance with NFPA 13. The connection pipe from the air compressor shall not be less than 1/2 inch in diameter and shall enter the system above the priming water level of the dry pipe valve. Install a check valve in...
2.7.1 Air Compressor
2.7.2 Air Pressure Maintenance Device
2.7.3 Air Supply Piping System
2.7.4 Low Air Pressure Alarm Device
2.8 WATERFLOW ALARM
2.9 ALARM INITIATING AND SUPERVISORY DEVICES
2.9.1 Sprinkler Pressure (Waterflow) Alarm Switch
2.9.2 Low Air Pressure Supervisory Switch
2.9.3 Valve Supervisory (Tamper) Switch
2.10 FIRE DEPARTMENT CONNECTION
2.11 SPRINKLERS
2.11.1 Pendent Sprinkler
2.11.2 Upright Sprinkler
2.11.3 Corrosion Resistant Sprinkler
2.12 ACCESSORIES
2.12.1 Sprinkler Cabinet
2.12.2 Pendent Sprinkler Escutcheon
2.12.3 Pipe Escutcheon
2.12.4 Sprinkler Guard
2.12.5 Identification Sign

2.13 DOUBLE-CHECK VALVE BACKFLOW PREVENTION ASSEMBLY

PART 3 EXECUTION
3.1 EXAMINATION
3.2 INSTALLATION REQUIREMENTS
INSPECTION BY FIRE PROTECTION SPECIALIST
3.4 ABOVEGROUND PIPING INSTALLATION
3.4.1 Protection of Piping Against Earthquake Damage
3.4.2 Piping in Exposed Areas
3.4.3 Piping in Finished Areas
3.4.4 Pendent Sprinklers Locations
3.4.5 Upright Sprinklers
3.4.6 Pipe Joints
3.4.7 Reducers
3.4.8 Pipe Penetrations
3.4.9 Escutcheons
3.4.10 Inspector's Test Connection
3.4.11 Drains
3.4.12 Installation of Fire Department Connection
3.4.13 Identification Signs
3.5 UNDERGROUND PIPING INSTALLATION
3.6 ELECTRICAL WORK
3.7 PIPE COLOR CODE MARKING
PRELIMINARY TESTS
3.8.1 Underground Piping
3.8.1.1 Flushing
3.8.1.2 Hydrostatic Testing
3.8.2 Aboveground Piping
3.8.2.1 Hydrostatic Testing
3.8.2.2 Air Pressure Test
3.8.2.3 Backflow Prevention Assembly Forward Flow Test
3.8.3 Testing of Alarm Devices
3.8.4 Trip Tests of Dry Pipe Valves
3.8.5 Main Drain Flow Test
3.9 FINAL ACCEPTANCE TEST
3.10 ONSITE TRAINING
(X) 52.204-9 -- PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (JAN 2011) - FAR
(X) 52.216-24 Limitation of Government Liability.
(X) 52.216-25 Contract Definitization.
(X) 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE, ALT I (NOV 2011)
(X) 52.222-22 -- PREVIOUS CONTRACTS AND COMPLIANCE REPORTS. (FEB 1999) - FAR
(X) 52.222-40 – NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR RELATIONS ACT (DEC 2010) - FAR
(X) 52.222-50 -- COMBATING TRAFFICKING IN PERSONS (MAR 2015) – FAR
(X) 52.222-54 – EMPLOYMENT ELIGIBILITY VERIFICATION (OCT 2015) – FAR
(X) DFARS 252.222-7007 REPRESENTATION REGARDING COMBATING TRAFFICKING IN PERSONS (JAN 2015)
(X) 52.222-55 -- MINIMUM WAGES UNDER EXECUTIVE ORDER 13658 (DEC 2015) - FAR
(X) 52.222-99, ESTABLISHING A MINIMUM WAGE FOR CONTRACTORS. (DEVIATION 2014-00017) (JUNE 2014) - FAR
(X) 52.223-1 -- BIOBASED PRODUCT CERTIFICATION (May 2012) - FAR.
(X) 52.223-2 -- AFFIRMATIVE PROCUREMENT OF BIOBASED PRODUCTS UNDER SERVICE AND CONSTRUCTION CONTRACTS (SEP 2013) - FAR.
(X) 52.223-4 -- RECOVERED MATERIAL CERTIFICATION (MAY 2008) - FAR
(X) 52.223-17 – AFFIRMATIVE PROCUREMENT OF EPA-DESIGNATED ITEMS IN SERVICE AND CONSTRUCTION CONTRACTS (MAY 2008) – FAR
(X) 252.223-7004 DRUG-FREE WORK FORCE (SEP 1988) - DFARS
(X) 52.225-10 -- Notice of Buy American Act Requirement—Construction Materials – FAR (MAY 2014)
(X) 52.249-9000 ADMINISTRATIVE COSTS OF REPROCUREMENT AFTER DEFAULT (MAY 1988) - DLAD
(X) 52.204-19 – INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) - FAR
(X) 52.209-7 – Information Regarding Responsibility Matters (JUL 2013)-FAR
(X) 252.203-7996 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS --REPRESENTATION (CLASS DEV/2016-00003)(OCT 2015)
(X) DFARS 252.203-7998 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS -- REPRESENTATION (CLASS DEV/ 2015-O0010) (FEB 2015)
(X) DFARS 252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (DEC 2015)
(X) DFARS 252.206-7000 DOMESTIC SOURCE RESTRICTION (DEC 1991)
(X) 52.214-34 SUBMISSION OF OFFERS IN THE ENGLISH LANGUAGE (APR 1991) - FAR
(X) 52.214-35 SUBMISSION OF OFFERS IN U.S. CURRENCY (APR 1991) - FAR
(X) 52.215-5 FACSIMILE PROPOSALS (OCT 1997) - FAR
(X) 52.215-9008 FACSIMILE BIDS AND PROPOSAL – DLAD
(X) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) - FAR
ORIGINAL - RESPONSE TO RFP SP4702-16-R-0011
PROJECT CSC-16729, “Convert Fire Protection Antifreeze Loop to Dry System”.

File details come from the government source that posted it. Updated .