SOW FIREFIGHTER STRUCTURAL PPE RJ FJ272790004 Comply-Exception.docx
DOCX document 48 KB Posted
- Attached to
- Structural Firefighting PPE for San Joaquin
- Solicitation number
- SP3300-27-Q-0028
- Issued by
-
Defense Logistics Agency Distribution
About this file
This is a Statement of Work (SOW) for structural firefighting protective equipment for the Defense Logistics Agency Installation Management San Joaquin Fire & Emergency Services in Tracy, California, under requisition RJ FJ272790004.
The SOW specifies the procurement of five each of three items: structural firefighting jackets (Globe G-XTREME 3.0 or equal), structural firefighting pants (Globe Pant System IH READY or equal), and internal escape harnesses (Globe Series 1 Harness or equal). All garments must comply with NFPA 1970 (2025 Edition) and OSHA requirements. The jackets and pants require black Pioneer outer shell material, Titanium SL2 thermal liner, and GORE-TEX CROSSTECH Innovate moisture barrier with sealed seams. Detailed construction specifications include multi-panel tapered jacket construction with inverted pleats for mobility, two-piece contoured sleeves with expansion pleats, reinforced cuffs with Ara-Shield material, and multiple pockets including cargo expansion pockets and a radio pocket. Pants must feature IH READY internal harness compatibility, regular fit with elasticized waistband, cathedral-style padded knee reinforcements, expansion pockets on both legs, and reverse boot cut cuffs. All garments must include lime/yellow 3M Scotchlite reflective trim meeting NFPA standards, custom lime/yellow reflective lettering (SAN JOAQUIN and DLA), and dragresc rescue devices in jackets. Sizing must accommodate gender-specific patterns in multiple sizes with individual fitting by the vendor's samples within 96 hours of notice. Jackets and pants must be manufactured in the United States and comply with the Berry Amendment; the internal harness is exempted from Berry Amendment compliance. All components require third-party UL or equivalent certification to applicable standards, and the manufacturer must hold ISO 9001 certification and Better Business Bureau accreditation. The manufacturer shall provide a five-year hook and loop support program and barcode labeling with asset tracking system capability. Delivery is F.O.B. destination to DLA Fire Department in Tracy, California.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ SP3300-27-Q-0028.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
PROTECTIVE JACKET AND PANTS
FOR STRUCTURAL FIRE FIGHTING
DLA Installation Management San Joaquin – Fire & Emergency Services, Tracy, CA Requisition: RJ FJ272790004
SCOPE
This Statement of Work (SOW) details the design and materials criteria for structural firefighting protective jackets, pants, and internal escape harnesses that protect the upper and lower body, excluding head, hands, and feet, against adverse environmental effects during structural fire fighting. All materials and construction shall meet or exceed NFPA 1970, Standard on Protective Ensembles for Structural and Proximity Firefighting, Work Apparel, Open-Circuit Self-Contained Breathing Apparatus (SCBA) for Emergency Services, and Personal Alert Safety Systems (PASS), 2025 Edition (which superseded NFPA 1971), and all applicable OSHA requirements for structural firefighter protective clothing.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
QUANTITIES AND DELIVERABLES
| Item |
| Qty / Unit |
| Description |
| 1 |
| 5 EA |
| Structural firefighting jacket, brand name or equal: Globe G-XTREME® 3.0 Jacket, Globe Part No. 1C745M1T, with black Pioneer outer shell, Titanium SL2 thermal liner, and GORE-TEX® CROSSTECH® Innovate moisture barrier, built to the salient characteristics in this SOW. |
| 2 |
| 5 EA |
| Structural firefighting pants, brand name or equal: Globe Pant System IH READY, Regular Fit, Globe Part No. GC745M1R, with black Pioneer outer shell, Titanium SL2 thermal liner, and GORE-TEX® CROSSTECH® Innovate moisture barrier, built to the salient characteristics in this SOW. |
| 3 |
| 5 EA |
| Internal escape harness, brand name or equal: Globe Series 1 Harness (GSA Part No. P-C-SERIES1-PB), compatible with the Item 2 IH READY pants. |
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
BRAND NAME
Brand names and manufacturer part numbers in this SOW identify the level of quality, performance, and features the Government requires. They do not restrict competition. Offers of "equal" products will be considered if they meet every salient characteristic in this SOW. An offeror proposing an equal product shall identify the manufacturer, model and part number, and submit descriptive literature that shows how the product meets each salient characteristic. Any trademarked material or feature named in this SOW (for example AXTION®, TrimTrax®, Ara-Shield®, Pioneer, Titanium SL2, CROSSTECH® Innovate) may be met by an equal material or feature of the same or better performance.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
SIZING
So that every member of the department can safely perform to the maximum of their ability without extra bulk or restriction, jackets and pants shall be available in all of the following sizes and dimensions:
Pants:
1. Gender: Gender-specific men's and women's patterns
1. Waist: Even sizes
1. Body Shape: Relaxed and Regular (Relaxed is a fuller cut in the hips and thighs, like relaxed-fit jeans). Regular fit is required for this order.
1. Inseam: Even sizes
Jackets:
1. Gender: Gender-specific men's and women's patterns
1. Chest: Even sizes
1. Back Length: Men's 29", 32", 35", 40"; Women's 26", 29"
1. Body Shape: Straight and Tapered. Straight offers more fullness at the hips (jacket sweep) and is recommended with IH Ready pants. Tapered is required for this order (Globe "TPR").
1. Sleeve: 1" increments
Jackets and pants available in only one standard shape will not be acceptable.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
OUTER SHELL MATERIAL – JACKETS AND PANTS
The outer shell shall be constructed of black Pioneer outer shell material, or equal, certified to NFPA 1970. The shell material shall have a durable water-repellent finish. The color of the garments shall be black.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
THERMAL INSULATING LINER – JACKET AND PANTS
The thermal liner shall be constructed of Titanium SL2 thermal liner material, or equal, certified to NFPA 1970. A 7 inch by 9 inch pocket, constructed of self material and lined with moisture barrier material, shall be affixed to the inside of the jacket thermal liner on the left side by means of a lock stitch. The thermal liner shall be attached to the moisture barrier and bound together around the perimeter by bias-cut neoprene-coated cotton/polyester binding. This provides better abrasion resistance than the less durable "stitch and turn" method. Further mention of "Thermal Liner" in this SOW refers to this section.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
MOISTURE BARRIER – JACKETS AND PANTS
The moisture barrier material shall be W.L. Gore GORE-TEX® CROSSTECH® Innovate moisture barrier, certified to NFPA 1970. Moisture barrier seams shall be sealed with GORE-SEAM® tape, or equal, to provide the liquid and viral penetration resistance required by NFPA 1970. Further mention of "Specified Moisture Barrier" in this SOW refers to this section.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
SEALED MOISTURE BARRIER SEAMS
All moisture barrier seams shall be sealed with sealing tape at least 1 inch wide. One side of the tape shall be coated with a heat-activated adhesive, oriented toward the moisture barrier seam. The adhesive shall be activated by heat, and the tape shall be applied to the seams under pressure from rollers made for that purpose.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
METHOD OF THERMAL LINER/MOISTURE BARRIER ATTACHMENT FOR JACKETS AND PANTS
The thermal liner and moisture barrier shall be completely removable from the jacket shell. Two strips of 5/8 inch wide FR hook and loop fastener tape shall secure the thermal liner/moisture barrier to the outer shell along the length of the neckline under the collar (see Collar section). The remainder of the thermal liner/moisture barrier shall be secured with snap fasteners appropriately spaced on each jacket facing and Ara-Shield® snap fasteners at each sleeve end. One Ara-Shield® snap tab shall be a different color in the liner, matching a color-coded snap tab in the shell, so the liner can easily be matched to the outer shell after inspection or cleaning.
The thermal liner and moisture barrier shall be completely removable from the pant shell. Nine snap fasteners shall be spaced along the waistband to secure the thermal liner to the shell. The legs of the thermal liner/moisture barrier shall be secured to the shell with Ara-Shield® snap fasteners, 2 per leg. The Ara-Shield® snap tabs shall be color-coded to a matching snap tab in the liner, so the liner can easily be matched to the outer shell after inspection or cleaning.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
THERMAL PROTECTIVE PERFORMANCE
The assembled garment, consisting of outer shell, moisture barrier, and thermal liner, shall have a TPP (Thermal Protective Performance) rating of not less than 35.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
STITCHING
The outer shell shall be assembled using stitch types #301, #401, #514 and #516. The thermal liners and moisture barriers shall be assembled using stitch types #301, #401, #504, #514, and #516. Stitching in all seams shall be continuous. Major A outer shell structural seams and major B liner structural seams shall have 8 to 10 stitches per inch. All major A seams shall be sewn with ball point needles only.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
BERRY AMENDMENT CONSTRUCTION
Jackets and pants shall be built in the manufacturer's Berry Amendment–compliant configuration (Globe "Berry Premier Package"), including Berry-compliant drag rescue device, stored energy bands, hanging name plate, and pant suspenders. See Country of Origin.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
JACKET CONSTRUCTION
BODY
The body of the shell and liner system shall be constructed of three separate panels: two front panels and one back panel. The body panels shall be shaped to provide a tailored fit that enhances body movement, and shall be joined by double stitching with Nomex® thread. One-piece outer shells shall not be acceptable. The jacket shall be a tapered body shape.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
AXTION® BACK
The jacket shall include inverted pleats for enhanced mobility and freedom of movement, in addition to that provided by the AXTION® sleeves. The outer shell shall have two inverted pleats, one on each side of the back body panel. The pleats shall begin at the top of each shoulder and extend vertically down the sides of the jacket to the hem, with maximum expansion at the shoulder area tapering toward the hem.
The thermal liner shall have a single inverted pleat at the upper middle of the back, matching the added length the back pleats give the shell, and shall expand with the outer shell pleats.
The moisture barrier shall have darts matching the added length the back pleats give the shell. The darts shall be at the shoulder blades of the moisture barrier, outside the SCBA straps, and shall work with the shell and thermal liner pleats for maximum expansion. The darts shall be seam-sealed to keep the barrier liquid-resistant.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
LOGOS
The garment brand shall be identified by red FR Nomex® thread embroidery on the top of the right collar showing the manufacturer's name. A reflective label specific to the garment style, measuring 1 inch wide by 4 inches long, shall be installed on the left pocket flap.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
DRAG RESCUE DEVICE (DRD)
A Berry-compliant, black Firefighter Drag Rescue Device shall be installed in each jacket. The ends of a 1½ inch wide strap, made of black Kevlar® with a red Nomex® center stripe, shall be sewn together to form a continuous loop. The strap shall be installed between the liner system and outer shell so that, when properly installed, it loops around each arm. The strap shall be accessed through a portal between the shoulders on the upper back, where it is secured by an FR strap. The DRD shall be removable for laundering. The access port shall be covered by an outside flap of shell material, with beveled corners designed to fit between the shoulder straps of an SCBA. The flap shall have an NFPA-compliant 3M Scotchlite™ reflective logo patch sewn to the outside identifying the DRD. The DRD shall not extend beyond the outside flap. Flimsy, rope-style DRD straps will not be considered.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
LINER ACCESS OPENING (JACKET)
The thermal liner and moisture barrier shall be completely removable from the jacket shell. Two strips of ⅝ inch wide FR hook and loop fastener tape shall secure the thermal liner/moisture barrier to the outer shell along the length of the neckline under the collar. This opening shall run the full length of the collar so the inner surfaces of the liner system can be inspected. The remainder of the thermal liner/moisture barrier shall be secured with at least four snap fasteners spaced on each jacket facing and four Ara-Shield® snap fasteners at each sleeve end. Neck snaps shall be provided at the collar and liner. The outside perimeter of the moisture barrier and thermal liner layers shall be bound together along the side and bottom edges with bias-cut neoprene-coated cotton/polyester binding, which prevents fraying and wicking of contaminants. Stitching used in place of the neoprene binding shall not be considered, because stitching does not give the same abrasion resistance.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
RETROREFLECTIVE FLUORESCENT TRIM
The retroreflective fluorescent trim shall be lime/yellow 3M Scotchlite™ Triple Trim (lime/yellow borders with silver center).
Each jacket shall have enough retroreflective fluorescent trim on the outside of the outer shell to meet the requirements of NFPA 1970 and OSHA.
The trim shall be 3 inches wide, NYC style, sized for 29" and 32" jacket lengths, placed as follows: around the bottom of the jacket within approximately 1 inch of the hem; around the back and chest approximately 3 inches below the armpit; around each sleeve below the elbow; and around each sleeve above the elbow. 3 inch triple trim shall also run over the radio pocket.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
REINFORCED TRIM STITCHING
All reflective trim shall be secured to the outer shell with Nomex® thread, using a locking chainstitch protected by TrimTrax®. This is a strip of 3/32 inch, flame-resistant black Kevlar® cording that provides a bed for the stitching along each edge of the trim and protects the thread from abrasion. Two rows of plain stitching used in place of TrimTrax® are not acceptable. All trim ends shall be securely sewn into a seam for a clean finished appearance.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
LETTER PATCH
Sewn-On Letter Patch (Row A, Upper Back): Each jacket shall have a black rectangular sewn-on letter patch, approximately 11 inches by 16 inches, constructed of a layer of outer shell material and sewn to the upper back. Note: "SAN JOAQUIN" will not fit in 3 inch letters on jacket sizes 38 and below; for those sizes, 2 inch letters shall be used on an 11 inch by 15 inch patch.
Hanging Name Plate (Lower Back): Each jacket shall have a black, Berry-compliant removable hanging name plate, approximately 5 inches by 20 inches, attached at the lower back by snap and hook and loop fasteners.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
CUSTOM LETTERING
All lettering shall be lime/yellow 3M Scotchlite™ reflective letters, or equal, as follows:
1. "SAN JOAQUIN" in 3 inch letters, arched across the top of the sewn-on letter patch (Row A).
1. "D L A" in 3 inch letters at the bottom of the letter patch, below the arch.
1. Each firefighter's last name in 3 inch letters on the removable hanging name plate at the bottom of the jacket. Names will be provided by the Government (Mark-For).
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
COLLAR & FREE HANGING THROAT TAB
The collar shall be four-layer construction and two-piece design, with at least 3 rows of quilting. The outer layers shall be outer shell material, with at least two layers of specified moisture barrier sandwiched in between. The rear inside ply of moisture barrier shall be sewn to the collar's back layer of outer shell at the edges only. The forward inside ply of moisture barrier shall be sewn to the inside of the collar at the edges only. The left and right halves of all collar materials shall be joined in the center by stitching, so the collar keeps its shape and roll. The collar shall be at least 3½ inches high and graded to size. The leading edges of the collar shall extend up evenly from the leading edges of the jacket front body panels so there is no gap at the throat. The collar's back layers of outer shell and moisture barrier shall be joined to the body panels with two rows of stitching. Inside the collar, above the rear seam, there shall be a strip of ⅝ inch wide FR hook fastener tape running the full length of the collar. The collar's front layers of moisture barrier and outer shell shall have another strip of ⅝ inch wide hook fastener tape stitched to the inside lower edge, running the full length of the collar. These two strips shall engage matching FR loop fastener tape at the front and back neck area of the liner system.
The throat tab shall be a scoop-type design made of two plies of outer shell material with two center plies of moisture barrier. It shall measure at least 3 inches wide at the center, tapering to 2 inches at each end, with a total length of approximately 9 inches. It shall be attached to the right side of the collar by a 1 inch by 1 inch piece of Nomex® twill webbing, and shall be secured closed and stowed with FR hook and loop fastener tape oriented so it is not exposed to the environment when closed. Two 1½ inch by 3 inch pieces of FR loop fastener tape shall be sewn vertically to the inside of each end of the throat tab. Matching 1 inch by 3 inch pieces of FR hook fastener tape shall be sewn horizontally to the leading outside edge of the collar on each side, for attachment and adjustment when closed and wearing an SCBA mask. For storage, a 1 inch by 3 inch piece of FR hook fastener tape shall be sewn horizontally to the inside of the throat tab directly under the loop tape, so the strap folds in half and fastens to itself.
A hanger loop made of a double layer of outer shell material shall be sewn to the top center of the collar.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
JACKET FRONT
The jacket shall have separate facings so there is no interruption in thermal or moisture protection at the front closure. The facings shall be approximately 3 inches wide, extend from collar to hem, and be double-stitched to the underside of the outer shell at the leading edges of the front body panels. Breathable moisture barrier material shall be sewn to the jacket facings and sandwiched between the facing and the inside of the body panel, with the film side facing inward. A wicking barrier of specified moisture barrier material shall be installed on the front closure system on the left and right sides directly below the front facings for continuous protection and overlap. The wicking barrier shall extend no more than ¾ inch beyond the inner facing; false facings are not acceptable. The thermal liner and moisture barrier assembly shall attach to the jacket facings with snap fasteners.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
STORM FLAP
A rectangular storm flap approximately 6 inches wide (for the hook and dee inside / FR hook and loop outside closure, Globe #7C) and at least 23 inches long (based on a 32 inch jacket) shall be centered over the left and right body panels so there is no interruption in thermal or moisture protection at the front of the jacket. The storm flap shall be made of two plies of outer shell material with a center ply of breathable moisture barrier. It shall be double-stitched to the right body panel and reinforced at the top and bottom with bartacks.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
STORM FLAP AND JACKET FRONT CLOSURE SYSTEM
The jacket shall close with black hook and dee fasteners on the inside closure and FR hook and loop fastener tape on the outside storm flap (Globe #7C). The hooks and dees shall be heavy-duty, corrosion-resistant, black-finished, and sewn into the respective jacket front panels, spaced so they can be fastened and released with a gloved hand. The storm flap shall close over the left and right body panels and be secured with FR hook and loop fastener tape. A 1½ inch wide piece of FR loop fastener tape shall be installed along the leading edge of the storm flap on the underside with four rows of stitching. A matching 1½ inch wide piece of FR hook fastener tape shall be sewn with four rows of stitching to the front body panel, positioned to engage the loop tape when the storm flap is closed.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
CARGO/HANDWARMER EXPANSION (BELLOWS) POCKETS
Each jacket front body panel shall have a black 2 inch deep by 8 inch wide by 8 inch high expansion pocket, double-stitched to the panel, with the bottom of the pockets at the bottom of the jacket for full use with an SCBA. Two rust-resistant metal drain eyelets shall be installed in the bottom of each pocket. The back of each expansion pocket shall be fully reinforced with a layer of Kevlar® (full back). The pocket flaps shall be rectangular, made of two layers of outer shell material, 3 inches deeper than the pocket expansion and ½ inch wider than the pocket. The upper pocket corners shall be reinforced with backtacks, and the pocket flaps with bartacks. The pocket flaps shall close with FR hook and loop fastener tape: two 1½ inch by 3 inch pieces of FR hook tape installed vertically inside each flap (one at each end), and two matching pieces of FR loop tape installed horizontally on the outside of each pocket near the top.
A separate handwarmer pocket compartment shall be provided under each expansion cargo pocket, accessed from the rear of the pocket (45° entry) and lined with Nomex® fleece. Shell material linings are not acceptable.
For 32 inch or shorter jackets, retroreflective trim shall run over the bottom of the pockets so the trim stripe is not interrupted. On 26 inch jackets, standard pockets are not available; expansion pockets shall be 2 inches deep by 10 inches wide by 6 inches high, or 2 inches deep by 8 inches wide by 6 inches high.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
FLASHLIGHT (D-CELL) HOLDER
Each jacket shall have a black 2 inch by 5 inch D-cell flashlight holder on the right front, behind the cargo pocket.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
SURVIVOR (FLASHLIGHT) STRAP – RIGHT CHEST
Each jacket shall have a black flashlight strap, sized for a Streamlight® Survivor® right-angle light or equal, sewn to the right chest.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
AXTION® SLEEVES
The sleeves shall be two-piece, contoured construction, with an upper and a lower sleeve, both graded in proportion to the chest size. For unrestricted movement, the underside of each sleeve shall have two outward-facing pleats, front and back, on the shell and thermal liner. The moisture barrier shall have two darts, rather than pleats, for added length in the under sleeve; the darts shall be seam-sealed.
The pleats shall expand with upper arm movement and fold in on themselves when the arms are at rest, allowing multi-directional mobility in the shoulders and arms with little restriction or jacket rise. Stove-pipe or raglan-style sleeves will not be acceptable.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
SLEEVE CUFF REINFORCEMENTS
The sleeve cuffs shall be reinforced with a layer of black Ara-Shield® material.
The cuff reinforcements shall be at least 2 inches wide and folded in half, approximately half inside and half outside the sleeve end, for strength and abrasion resistance. The cuff reinforcement shall be double-stitched to the sleeve end; a single row of stitching is not acceptable. Jackets with a turned-and-stitched cuff do not give the same abrasion resistance and will not be acceptable.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
WRISTLETS / ELASTICIZED ADJUSTABLE SLEEVE WELLS
Each jacket shall have Nomex® hand and wrist guards (over the hand), at least 7 inches long and double thickness, attached to the liner sleeve (no wristlet in the shell sleeve). A separate thumbhole approximately 2 inches in diameter shall be recessed approximately 1 inch from the leading edge. The knit shall be 96% Nomex® / 4% spandex for shape retention.
Flame-resistant neoprene-coated cotton/polyester impermeable barrier material shall be sewn to the inside of the sleeve shell approximately 5 inches from the sleeve end, extending toward the cuff to form the sleeve well. The sleeve well shall form an elasticized, adjustable cuff end with an FR hook and loop tab for a snug fit at the wrist over the knit wristlet. This keeps water and other hazards out of the sleeves when the arms are raised. The neoprene barrier shall also line the inside of the sleeve shell from the cuff back approximately 5 inches, where it joins the sleeve well and is double-stitched to the shell. Four Ara-Shield® snap tabs shall be sewn into the juncture of the sleeve well and wristlet, equally spaced, with female snaps for matching male snaps in the liner sleeves. One tab shall be a different color, matching a color-coded tab in the liner. This configuration ensures there is no gap in protection between the sleeve liner and wristlet.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
LINER ELBOW THERMAL ENHANCEMENT
An additional layer of thermal liner material shall be sewn to the elbow area of the liner system for added protection at contact points and more thermal insulation in this high-compression area. The layers shall be sandwiched between the thermal liner and moisture barrier and stitched to the thermal liner only. Finished size shall be 5 inches by 8 inches, with overedged edges. Raw or unfinished edges, or thermal scraps in place of full-cut padding, are not acceptable.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
LINER SHOULDER AND UPPER BACK THERMAL ENHANCEMENT
At least one additional layer of thermal liner material shall increase thermal insulation in the upper back, front, and shoulder area of the liner system. This full-cut layer shall drape over the top of each shoulder from the collar to the sleeve/shoulder seam, extend down the front approximately 5 inches from the collar, and down the back to a depth of 7 inches, for greater CCHR protection in this high-compression area. It shall be sandwiched between the thermal liner and moisture barrier, stitched to the thermal liner only, and finished by overedging. Raw edges, thermal scraps, or smaller CCHR reinforcements are not acceptable.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
STORED ENERGY BANDS
Each jacket shall include Berry-compliant stored energy bands at the lower and upper locations, as provided in the manufacturer's configuration, to reduce stored-energy burn risk at high-compression areas.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
RADIO POCKET
Each jacket shall have a black box-type radio pocket on the left chest, measuring approximately 2 inches deep by 3.5 inches wide by 8 inches high, double-stitched to the jacket, with one drain eyelet in the bottom. The pocket shall have an additional material reinforcement. The flap shall be two layers of outer shell material, approximately 5 inches deep and ¼ inch wider than the pocket, closed with a 1½ inch by 3 inch piece of FR hook tape inside the flap (starting at the bottom center) and a matching piece of FR loop tape installed horizontally on the outside of the pocket near the top center. The entire inside of the pocket shall be lined with neoprene-coated cotton/polyester impermeable barrier material, which shall also be sandwiched between the two layers of the flap. 3 inch triple trim shall run over the radio pocket (radio pockets 6 inches or taller require trim).
Note: Radio pockets shall be fully lined with neoprene to comply with the NFPA 1970 stored energy test.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
NOTCHED RADIO POCKET FLAP
The radio pocket flap shall be notched for the radio antenna on the left side, as worn.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
MICROPHONE STRAPS
Each jacket shall have two black microphone straps, each 1 inch by 3 inches, made of a double layer of outer shell material and sewn to the jacket at the ends only:
1. One on the right chest, high position.
1. One on the left chest, 4 inches above the radio pocket.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
EMBROIDERED AMERICAN FLAG – RIGHT SLEEVE
Each jacket shall have a Nomex® embroidered American flag, approximately 2½ inches high by 3½ inches wide, on the right sleeve. Per military protocol, the field of stars shall be at the top right corner for right-sleeve installation. Flags of fabric other than Nomex® are not acceptable.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
PANT CONSTRUCTION
BODY
The pant shell shall be four separate body panels: two front and two back. The panels shall be shaped for a tailored fit, joined by double stitching with Nomex® thread, and graded to size for accurate fit across a broad range of sizes. The pants shall be regular fit and IH READY (designed to accept the internal harness in Item 3).
The front body panels shall be wider than the rear panels to give more fullness over the knee. The side leg seams (inside and outside) shall roll to the rear of the pant leg starting at the knee, which moves them away from the high-abrasion areas on the sides of the lower legs.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
AXTION® SEAT
The rise of the rear center back seam, from the top back of the waistband to the crotch, shall exceed the front rise by 8 inches, graded to size. The longer rear seam adds fullness to the seat for mobility when stepping up or crouching, and keeps the knee aligned over the knee pads when kneeling and crawling.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
LINER ACCESS OPENING (PANT)
The thermal liner and moisture barrier layers of the pant liner system shall have an access opening for interior inspection, service, and replacement. The two layers shall be stitched together at the front fly so one cannot be used without the other. The liner system shall have a reinforcement of black Nomex® twill webbing sewn to the bottom of the fly opening to prevent tearing from repeated donning and doffing.
The pant liner system shall have a full-length opening along the entire waistline for inspecting the inner layers and performing a complete liner inspection. The thermal liner and moisture barrier shall each be bound with neoprene-coated bias-cut tape and joined with a snap at the center back. At least 4 snap tabs shall be sewn to the underside of the waistband, with matching snaps in the moisture barrier to secure it to the shell. The thermal layer shall snap directly to the independent waistband with nine snap fasteners. No hook and loop shall be used to close the liner access opening.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
RETROREFLECTIVE FLUORESCENT TRIM
The pants shall have a 3 inch lime/yellow 3M Scotchlite™ Triple Trim stripe around each leg cuff below the knee, meeting NFPA 1970. The bottom of the trim band shall be approximately 3 inches above the cuff.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
REINFORCED TRIM STITCHING
All reflective trim shall be secured to the outer shell with Nomex® thread, using a locking chainstitch protected by TrimTrax®, (3/32 inch flame-resistant black Kevlar® cording along each edge of the trim). Two rows of plain stitching in place of TrimTrax® are not acceptable. All trim ends shall be sewn into a seam.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
ELASTICIZED WAISTBAND
The pant design shall transfer the weight of the pant to the hips rather than the shoulders and suspenders. The two rear outer-shell body panels, starting at the side seams, shall have an elasticized waistband integral to the shell, with the elastic covered in aramid fabric.
The waist shall have an independent stretch waistband on the inside, made of a separate piece of black aramid outer shell material cut on the bias, at least 2 inches wide. Neoprene-coated cotton/polyester shall be sewn to the back of the waistband to form three-layer protection. The top edge of the waistband reinforcement shall be double-stitched to the outer shell at the top of the pants. The lower edge shall be serged and left unattached to the shell to accept the thermal liner and moisture barrier, which shall be secured to the underside of the waistband reinforcement so they are sandwiched between it and the outer shell. This reduces liner detachment while donning and keeps snaps from passing through from the shell to the inner liner. Pants without an independent waistband are not acceptable.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
EXTERNAL / INTERNAL FLY FLAP
The pants shall have a vertical outside fly flap of two layers of outer shell material with a layer of moisture barrier between them. It shall be double-stitched to the left front body panel, approximately 2½ inches wide, with length graded to waist size, and reinforced with bartacks at the base. An internal fly flap of one layer each of outer shell, thermal liner, and specified moisture barrier, approximately 2 inches wide and graded to waist size, shall be sewn to the leading edge of the right front body panel. The inside of the right front panel shall be thermally enhanced directly under the outside fly with a layer of moisture barrier and thermal liner.
The pants shall close with FR hook and loop fastener tape (Velcro® closure). The underside of the outside fly flap shall have a 1½ inch wide strip of FR loop tape quadruple-stitched along its full length through the shell only; stitching shall not penetrate the moisture barrier insert. A matching 1½ inch wide strip of FR hook tape shall be quadruple-stitched to the outside right front body panel. Snap fastener halves shall be installed at the leading edge of the waistband to further secure the pants closed.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
BELT AND BELT LOOPS
Each pant shall include a 2 inch wide black Nomex® belt with an adjustable hi-temp thermoplastic buckle as the primary positive-locking exterior closure. Sizing shall be adjusted with a self-locking 2 inch thermoplastic buckle that also provides quick release for donning and doffing. The belt shall attach to the two front body panels starting at the side seams and run through tunnels of black aramid outer shell material. The tunnels shall begin at the side seams and end at the front of the pant, exposing the buckle. A belt loop of double-layer black aramid, approximately ½ inch by 3 inches, shall be attached to the top of the right tunnel approximately 2 inches from the tunnel opening for storing the belt tab. Wide belt loops compatible with the internal harness (Item 3) shall be provided.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
INTERNAL HARNESS
The pants shall be IH READY and fully compatible with the Item 3 internal harness. The internal harness (Globe Series 1 Harness) shall be certified to NFPA 2500, Standard for Operations and Training for Technical Search and Rescue Incidents and Life Safety Rope and Equipment for Emergency Services, current edition (which superseded NFPA 1983). The harness shall be installed in the pant according to the manufacturer's instructions and shall work with the right-leg rope pocket described below.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
AXTION® KNEE
The outer shell of the pant legs shall have horizontal expansion pleats at the knee, with matching darts in the liner, for added fullness, freedom of movement, and flexibility. The pleats shall fold to open outward toward the side seams. The knee shall be placed in proportion to the inseam so it falls at the anatomically correct knee location.
The thermal liner shall have four pleats per leg at the front of the knee: two above the knee (one each side) and two below (one each side). The moisture barrier shall have two darts, rather than pleats, for added length under the knee. The liner pleats and darts shall work with the shell expansion panels to increase freedom of movement when kneeling, crawling, and climbing stairs or ladders.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
LINER KNEE THERMAL ENHANCEMENT
At least one additional layer of specified thermal liner and one additional layer of moisture barrier, at least 9 inches by 11 inches, shall be sewn to the knee area of the liner system for added CCHR protection and thermal insulation. The layers shall be sandwiched between the thermal liner and moisture barrier, stitched to the thermal liner only, and finished by overedging. Raw edges, thermal scraps, or smaller CCHR reinforcements are not acceptable.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
KNEE REINFORCEMENTS
The knee area shall be reinforced with a black Ara-Shield®, cathedral-style knee shell, centered on the leg for coverage when bending, kneeling, and crawling, and double-stitched to the outside of the outer shell for strength and abrasion resistance. The knee reinforcement shall be removable without opening any seams of the pant outer shell.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
PADDING UNDER KNEE REINFORCEMENTS
Each knee shall have Berry-compliant padding in a padded pocket built into the cathedral knee shell (Globe "45/G" padded cathedral knee), plus a padded knee pocket with Silizone padding. Padding shall sit between the shell and the knee reinforcement layers.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
EXPANSION (BELLOWS) POCKETS
Left leg: A black expansion pocket, approximately 2 inches deep by 10 inches wide by 10 inches high, shall be double-stitched to the side of the left leg, straddling the outseam above the knee. The pocket shall have a self-material front expansion, and the pocket pouch shall be reinforced with a layer of Kevlar® on the inside (Kevlar® pouch).
Right leg: A black rope pocket for the internal harness escape system (Globe "GIH rope" pocket) shall be installed on the right leg, straddling the outseam above the knee, sized to hold the escape rope and descent device.
Two rust-resistant metal drain eyelets shall be installed on the underside of each pocket. The pocket flaps shall be rectangular, made of two layers of outer shell material, 3 inches deeper than the pocket expansion and ½ inch wider than the pocket. Upper pocket corners shall be reinforced with backtacks and flaps with bartacks. Flaps shall close with FR hook and loop fastener tape: two 1½ inch by 3 inch pieces of FR hook tape installed vertically inside each flap (one at each end), and two matching pieces of FR loop tape installed horizontally on the outside of each pocket near the top.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
PANT CUFF REINFORCEMENTS
The pant cuffs shall be reinforced with a layer of black Ara-Shield® material.
The cuff reinforcement shall be at least 2 inches wide, folded in half (approximately half inside and half outside the leg end), and double-stitched to the outer shell with at least two rows of stitching. Pants that are turned and stitched at the cuff, instead of having an independent cuff reinforcement, are not acceptable.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
PADDED RIP-CORD SUSPENDERS & ATTACHMENT
The inside waistband shall have four attachments (2 front, 2 back) for Berry-compliant, regular-length, black "H" style "Padded Rip-Cord" suspenders. The attachments shall be double-layer black aramid, approximately ½ inch wide by 3 inches long, sewn horizontally at the ends only to form a loop, like a horizontal belt loop.
The suspender body shall be 2 inch wide black webbing straps running over each shoulder to approximately shoulder-blade height on the back, where they are joined by a 2 inch wide horizontal piece of webbing approximately 8 inches long, forming the "H" so the suspenders don't slip off the shoulders. The shoulder area shall be padded by fully encasing the webbing in aramid batting and wrap-around black aramid.
The rear ends of the suspenders shall be sewn to 2 inch wide elasticized webbing extensions approximately 8 inches long, ending in thermoplastic loops. The forward ends shall have black powder-coated, non-slip metal slides with teeth, through which 9 inch lengths of strap webbing ("Rip-Cords") run, ending in thermoplastic loops. Pulling the Rip-Cords shall adjust the suspenders quickly.
Black aramid suspender attachments with two snap fasteners each shall be threaded through the thermoplastic loops on the forward and rear ends. These attachments shall thread through the waistband loops, fold over, and snap to themselves to secure the suspenders to the pants.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
REVERSE BOOT CUT
The outer shell pant leg cuffs shall be cut so the back of the leg is approximately 1 inch shorter than the front. The liner shall also have a reverse boot cut at the rear of the cuff and a concave cut at the front so it does not hang below the shell. This reduces premature cuff wear and falls caused by "walking" on the pant cuffs. Pants with "cut-outs" in the back panel instead of a contoured boot cut are not acceptable.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
GENERAL REQUIREMENTS
THIRD PARTY TESTING AND LISTING PROGRAM
All components used in these garments and the internal harness shall be tested for compliance with NFPA 1970 (garments) and NFPA 2500 (harness) by Underwriters Laboratories (UL) or another independent third-party certification organization. The certification organization shall certify and list compliance with those standards, shown by its certification label.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
LABELS
Appropriate warning labels shall be permanently attached to each garment and shall include:
1. Compliance with NFPA 1970, 2025 Edition
1. Third-party certification organization mark
1. Manufacturer's name and address
1. Manufacturer's garment identification number
1. Date of manufacture
1. Size
PFAS disclosure: The vendor shall give written notice, at time of sale, stating whether any garment component contains intentionally added per- and polyfluoroalkyl substances (PFAS) and the reason for their use, as required by California Health and Safety Code § 13061.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
ISO CERTIFICATION / REGISTRATION
The protective clothing manufacturer shall be certified and registered to ISO 9001 to assure a satisfactory level of quality.
| VENDOR RESPONSE |
| Yes |
| No |
Remarks / explanation (required for Exception):
BETTER BUSINESS BUREAU
The manufacturer shall be accredited by the Better Business Bureau, showing a commitment to ethical and principled business practices.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
WARRANTY
The manufacturer shall warrant these jackets, pants, and harnesses to be free from defects in materials and workmanship for their serviceable life when properly used and cared for.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
HOOK AND LOOP SUPPORT PROGRAM
A support program shall cover hook or loop tape that has begun to fray or otherwise degrade from normal wear, for five years from the original date of manufacture. It shall cover repair or replacement of any hook and/or loop on the garments at no charge, provided the garments are otherwise serviceable.
This program does not cover damage from fire, heat, chemicals, misuse, accident, or negligence. Failure to properly care for the garments voids this program.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
SIZING BY VENDOR
The vendor shall have both male and female sizing samples on hand for sizing, and shall be available to perform all sizing within 96 hours of written notice from the Government. Sizing by tape measure alone is not acceptable. The vendor shall individually fit all five (5) designated personnel at DLA San Joaquin Fire & Emergency Services, Tracy, CA, using sizing samples, and shall build each jacket and pant to the size recorded for that individual. Sizes shall be confirmed with the Government POC before manufacture.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
BAR-CODE/RECORD KEEPING INTERFACE
A one-dimensional barcode in Interleaved 2 of 5 format shall be printed on the label of each separable layer of the garment, representing the garment serial number. The manufacturer shall provide a detailed list of each asset in a drop-shipped order, including:
1. Brand
1. Order Number
1. Serial Number
1. Style Number
1. Color
1. Description
1. Chest/Waist Size
1. Jacket/Pant Length
1. Sleeve Length
1. Date of Manufacture
1. Mark-For Data
This information shall be importable into the manufacturer's web-based asset tracking system for the cleaning and inspection requirements of OSHA and NFPA 1850.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
MARKING AND DELIVERY
Each jacket and pant shall be marked for (Mark-For) the individual firefighter it was sized for. Delivery shall be F.O.B. Destination to:
Defense Logistics Agency, Fire Department 25600 South Chrisman Rd., Building 235 Tracy, CA 95304
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
COUNTRY OF ORIGIN
Jackets and pants (Items 1 and 2) shall be manufactured in the United States and shall comply with the Berry Amendment (10 U.S.C. 4862; DFARS 252.225-7012).
Exception – Internal Harness (Item 3): The Globe Series 1 Harness, or equal, is not required to be Berry Amendment compliant. This acquisition is at or below the simplified acquisition threshold, and the Berry Amendment restrictions do not apply under DFARS 225.7002-2(a). Contracting Officer to confirm.
| VENDOR RESPONSE |
| Comply |
| Exception |
Remarks / explanation (required for Exception):
EXCEPTIONS TO SPECIFICATIONS
Any and all exceptions to the above specifications must be clearly stated for each heading. Use additional pages for exceptions, if necessary. Offerors proposing an "equal" product must identify, for each heading, how the proposed product meets the salient characteristic.
| SECTION / HEADING |
| EXCEPTION AND PROPOSED ALTERNATE |
SOW – Structural Firefighting PPE – RJ FJ272790004 Page 1 of 2
File details come from the government source that posted it. Updated .