Amendment 1.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

Please see the page two for details of amendment.

DLA Distribution Acquisition Operations 430 Mifflin Avenue New Cumberland, PA 17070-5059 Local Admin: Deborah Johnson; Deborah.L.Johnson@dla.mil

SP330026Q0262

1 3

09/02/2026

The purpose of this amendment is to:

1. The closing date of 04 September 2026 at 5pm Eastern Standard Time (EST) for Request for Quotation (RFQ) SP3300-26-Q-0262 has not been extended.

2. Replace the salient characteristics in section three of the solicitation and the schedule of supplies with the information below.

3.

NSA EPL Listed NSA/CSS EPL for Paper Disintegrators, CDs, and Key Tape

Equipment Class Heavy-duty industrial granulator / knife mill disintegrator.

Drive Power 20 HP to 25 HP, 3-Phase electrical motor.

Feed Opening / Throat Minimum 12" x 20" cutting chamber inlet.

Cutting Action High-inertia balanced rotor utilizing a scissor-shear geometry against stationary bed knives.

Throughput Capacity Rated for a minimum of 800 lbs./hr. (high-security paper) up to 1,600 lbs./hr. (coarse materials).

Sizing Screen Interchangeable discharge screen capability (supporting sizes from 3/32" up to 1/2" or greater).

Materials Accepted Capable of processing mixed media feeds including bulk paper, optical discs, plastic electronic enclosures, and light e-waste.

4. See Questions and Answers Below:

• Question : Do you have a Loading Dock available?

o Answer: Yes.

• Question: Do you have a forklift available or any large equipment strong enough to remove the disintegrator from the Freight Truck?

o Answer: Yes.

• Question: Is the 450V/3Ph/60Hz available inside the room dedicated for the disintegrator?

o Answer: Yes.

• Question: What is the size of the door opening to the room dedicated to the new disintegrator system?

o Answer: 14’ x 14’

• Question: What is the ceiling height of the room dedicated to the new system?

o Answer: 30’ – 40’

• Question: What is the ceiling made out of? Is it cement, is it tiles, etc.?

o Answer: Sheet metal (truss system; warehouse)

• Question: Do you have a drawing of the room with the dimensions?

o Answer: Please see attached floor plan.

• Question: Do you need the system installed in the room?

o Answer: Yes,

5. All other terms and conditions remain the same.