Amendment 0001.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

2. AMENDMENT/MODIFICATION NUMBER

SP3300

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

SEE CONTINUATION PAGE(S)

DLA Distribution Acquisition Operations, J-7 Mifflin Avenue, Bldg 430 New Cumberland, PA 17070

7. ADMINISTERED BY (If other than Item 6)

POC: Morgan Costanzo morgan.costanzo@dla.mil

9A. AMENDMENT OF SOLICITATION NUMBER

SP330026Q0108

4/21/2026

9B. DATED (SEE ITEM 11)

4/14/2026

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. X

1 2

X 01

SP330026Q0108

Amendment 0001

The following questions and answers are hereby included into SP330026Q0108:

1. Are the listed part numbers (e.g., SBA1303518OCNV and associated patch/ name tape items) brand-specific requirements, or are equivalent products that meet the specifications acceptable?

Equivalent products are acceptable.

2. If equivalents are acceptable, are there any specific technical requirements, materials, or standards that must be met for compliance?

3. Do you have sizes for the carriers?

The vendor will measure each officer and determine the size of the carrier needed based on the existing body armor size of the officer.

• Front-Opening Design for easy donning and doffing

• Full coverage MOLLE/PALS Webbing. Most sizes are equipped with 4 or 5 rows, depending on length

• Ambidextrous Mic Tabs and Welts for simple and effective cable/comms management

• (2) Top-Access Zippered Chest Pockets

• Non-Abrasive Hexagon Ripstop Nylon Lining

• Badge Loop Field w/Eyelets

• Ambidextrous Front 1" X 5" Loop ID Field and (1) removable 2” X 6” Loop ID Field

• Rear 4" X 8" Loop ID Field

• Discreet Drag Handle

• Non-Abrasive Hexagon Ripstop Nylon Lining

• Front Armor Plate Pocket accommodates up to 10" X 12" Special Threat and Rifle Armor Plates

• Rear Armor Plate Pocket accommodates 10" X 12" Special Threat and Rifle Armor Plates

• Front and rear panels will have heat applied POLICE with designated sizes and colors based on rank

• Nametapes need to be cotton or poly-cotton blend with color designated name in block letters and have hook and loop on back