CLIN 0040 and 0041 drawings.pdf

LlD, WOODEN-SHEET METAL CONTAINER

152 X 52 1/ 4 X 1 1/8

D.L.A. MATERIAL NUMBER: 8115 NOOOO4162

PART QUAN. I DESCRIPTION I SIZE

NO.

1 2 LUMBER 1 X 8 X 152

2 5 LUMBER 1X8X373/4

3 I 1 I PLYWOOD 48 X 96 X 3/8

4 I 2 I PLYWOOD 24 X48X 3/8

�A§� 1 �F 1

(TWO OUTSIDE, TWO ON PLYWOOD SEAMS, ONE CENTERED)

(CENTERED)

(LEFT/RIGHT OF FULL SHEET)

Information to Wood Sheet Metal Pallet Lid, DLA Material No. 8115 N 00004162

Packing Level: Commercial Packaging

Closure: Commercial Level, IAW ASTM B660-15, Sec. 8, FIG. 26 (Modified)

Or

PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS

LEVEL

A

SPEC

ASTM B660 - 15 (MODIFIED)

DIMENSIONS: 152 X 53 X 3

WEIGHT: 25 LBS.

NOTES:

STYLE

2 (Fig. 26, Mod.)

CL VRTY GR

1) ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE

CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE

DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE

PACKAGING: PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT

2) All plywood to be Voluntary Product Standard PS 1-07, Exterior Grade CC.

3) Fasteners attaching P/N 3 & 4 to P/N 1 & 2 shall be common, commercial grade 1" power driven staples.

4) Fasteners attaching P/N 2 to P/N 1 (at all 10 locations) shall be commercial grade 5/8" power driven corrugated fasteners. 2 each per location.

DISTRIBUTION: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or

Operational Use. Other requests for this document shall be referred to the Defense Logistics Agency, Ft.

Belvoir, Virginia. Property of Defense Logistics Agency, Ft. Belvoir, Virginia.

NO. RE\IISIONS DRAWN BY I DATE

DEFENSE LOGISTICS AGENCY

NEW CUMBERLAND, PA 17070-5001

PROPOSED Wood Pallet Lid Sheet Metal Container Drawing

DEFENSE DEPOT Warner Robins, GA

DESIGl£0 B'I': I APPROVED BY: I f,£1,Dfll.E.

""""' "' I MECH/MOD ENGR SHEET

o, DRAWING NU�BER:

SCN.e

I

JULIAN DATE

Full Scale REV A

PART

NO.

PALLET, WOODEN-SHEET METAL CONTAINER

152 X 52 1/4 X 7 1/4

D. L.A. MATERIAL NUMBER: 8115 NOOO01822

QUAN. DESCRIPTION SIZE

2 LUMBER 1 X 8 X 152

5 LUMBER 1X8X373/4

3 LUMBER 1 X4 X 152

2 LUMBER 2 X 2 X 152

2 LUMBER 2X2X44

1 PLYWOOD 48X96X3/8

2 PLYWOOD 24 X48X 3/8

6 RUB STRIPS 2 X4 X 12

6 MITERED RUB STRIPS 4X4 X 12

(TWO OUTSIDE, TWO ON PLYWOOD SEAMS, ONE CENTERED)

(ONE CENTER, 2 STRADDLE 1 X 8 SEAMS)

(TOP FRAME,SIDE)

(TOP FRAME, END)

(CENTERED)

{LEFT/RIGHT OF FULL SHEET)

Information to Sheet Metal Pallet 8115 N 0000 1822

Packing Level: Commercial Packaging

Closure: Commercial Level, IAW ASTM B660-15, Sec. 8, FIG. 26 (Modified)

Or

PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS

LEVEL SPEC STYLE CL VRTY GR

A ASTM B660 - 15 (MODIFIED) 2 (Fig. 26, Mod.)

DIMENSIONS: 152 X 53 X 3

WEIGHT: 25 LBS.

NOTES:

1) ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART

OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO

HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER

STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR

DEFENSE PACKAGING: PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE.

THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT

2) All plywood to be Voluntary Product Standard PS 1-07, Exterior Grade CC.

3) Fasteners attaching P/N 3 & 4 to P/N 1 & 2 shall be common, commercial grade 1" power driven staples.

4) Fasteners attaching P/N 2 to P/N 1 (at all 10 locations) shall be commercial grade 5/8" power driven corrugated fasteners. 2 each per location.

DISTRIBUTION: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or Operational

Use. Other requests for this document shall be referred to the Defense Logistics Agency, Ft. Belvoir, Virginia.

Property of Defense Logistics Agency, Ft. Belvoir, Virginia.

PAGE 1 OF2

NO. REVISIONS DRAWN BY DATE

DEFENSE LOGISTICS AGENCY

NEW CUMBERLAND, PA 17070-5001

PROPOSED Wood Pallet - Sheet Metal Container Drawing

DEFENSE DEPOT Warner Robins, GA

DESIGNED BY: APPROVED BY: ACAD FILE:

DRAWN BY: MECH/MOD ENGR SHEET

DRAWING NUMBER:

OF

SCALE: JULIAN DATE

Full Scale REV A