Amendment_0003.pdf

PDF 133 KB Posted

Attached to
Towline Reader System Upgrade
Solicitation number
SP3300-18-Q-5019
Issued by

About this file

Amendment 0003

View the file

Other files

File Type Posted
Amendment_0002.pdf PDF
Amendment_0001.pdf PDF
Solicitation.zip ZIP file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO.

6081418004

4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE SP3300 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE FACILITY CODE

SP330018Q5019

X

2018 Apr 09

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of OffersX is extended, is not extended.

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

12. ACCOUNTING AND APPROPRIATION DATA (If required)

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc. ) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A NAME AND TITLE OF SIGNER (Type or print)

NSN 7540-01-152-8070

Previous edition unusable

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

16B. UNITED STATES OF AMERICA15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

(a) By completing Items 8 and 15, and returning

DLA DISTRIBUTION

OFFICE OF PROCUREMENT - EBS

430 MIFFLIN AVENUE

NEW CUMBERLAND PA 17070-5004

USA

15C. DATE SIGNED 16C. DATE SIGNED

D. OTHER (Specify type of modification and authority)

3. EFFECTIVE DATE

(X)

CHECK ONE

PAGE OF PAGES

9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

0003 07 May 2018

See following page(s).

X

PAGE 2 OF 3 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SP3300-18-Q-5019

The purpose of amendment 0003 is to to provide clarification for the following questions pertaining to solicitation SP3300-18-Q-5019.

Question 1: Will 102 units be installed on the towline or are any for spare usage?

Government Response: There is currently 98 active units, however, this could change at anytime. As it stands, 4 units, would be for spare usage. The entire package to include RFID antenna, control box, and associated cabling is still required for these units.

Question 2: Have the six original Allen-Bradley PLC3’s in Control Enclosures CE51 to CE56 been replaced with six Allen-Bradley ControlLogix PLC’s (one for each zone like the original design)? Or is there only one ControlLogix PLC controlling all the zones and if so, where is it located?

Government Response: Each original PLC3 was replaced, one for one with a Control logix processor in the original enclosure.

Question 3: Originally each PLC3 communicated to three remote I/O panels with the exception of Zone 6b which had two remote I/O panels. Remote I/O panels CE17 to CE25 and CE 28 to CE33 each communicated directly to a bank of RF Readers in a Master/Slave arrangement to a serial card in a 1770 Series I/O rack. Have the original 1770 series racks been upgraded as well? If they have we would expect there is now Ethernet communication to each remote I/O panel vs. the original “Blue Hose” remote I/O communication: is this correct?

Government Response: The 1771 I/O rack are still in place, but each remote cabinet now contains an Ethernet switch and also utilizes a Point I/O module

Question 4: What is the current PLC architecture now that PLC3’s have been upgraded to

ControlLogix?

Government Response: See #3, although in the main cabinets the Control logix rack does have a few open slots available.

PAGE 3 OF 3 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SP3300-18-Q-5019

Question 5: The original PLC3’s were connected via Allen-Bradley “Blue Hose” Data highway to the PLC3-TLC Data Highway Enclosure CE40. Data highway interface modules within that enclosure provided the RS232 data signal to the assigned port of the VAX-TLC Host computer.

Given the upgrade of the PLC’s it is likely the original communication between those has changed from Data highway to Ethernet. What is the communication architecture between the

PLC’s inclusive of the aforementioned CE40 panel?

Government Response: I believe there might be a semantics problem and we call the panels/ enclosures something else. During the last upgrade, a Compact logix was used to create a Data

Highway / Ethernet bridge. The original host rsr232 comm. connection is still in place, but the new Compact logix talks to each Zone using Ethernet IP. Basically the new processor emulates/ appears as a DH system to the host.

Question 6: How many PanelViews are being requested? Is there one per MCP (6 total) + 1 for the Controls Office for a total of 7 OR is there one for all of the MCPs (1 total) + 1 for the controls office for a total of 2?

Government Response: There will be a total of 7 PannelViews, one for each control cabinet (6 total) and one for the electronics shop.

Question 7: A 17-inch non-PC based screen is specified. The common A-B 2711P series PV does not have a screen larger than 15 inches. It is programmed with Factory Talk View Studio software. There is a new A-B 2715 series PV that offers a 19ò screen (17ò not available -

15ò is next smallest) that is programmed using Studio 5000 software. I want to confirm that the DLA wants to pursue the new 2715 technology as it may not be consistent with what the site currently uses. Please advise.

Government Response: The 19ò PannelView is preferable because it uses Studio 5000.

File details come from the government source that posted it.