Attachment_2_-_Statement_of_Work.pdf

SP3300-16-Q-0152

Attachment 2 – Statement of Work (SOW)

STATEMENT OF WORK (SOW) FOR

WAREHOUSE WORKSTATIONS/STOOLS DDSP

SECTION 1 INTRODUCTION

A. The Defense Logistics Agency (DLA) is a United States (US) Department of Defense (DOD) agency that provides worldwide logistics support for the missions of the Military Departments and the Unified Combatant Commands under conditions of peace and war. The mission of DLA Distribution Susquehanna PA is to provide a full range of distribution services using a seamless, tailored, worldwide Department of Defense distribution network that delivers effective, efficient and innovative support to combatant commands, military services, and other agencies during peace and war.

SECTION 2 GENERAL CONDITIONS AND REQUIREMENTS

2.1 SCOPE OF WORK

A. For the purpose of this SOW, the term “Contractor” applies to all Contractor employees, sub-contractor employees or any other person acting for or on behalf of the Contractor to perform required work under this SOW.

B. The contractor shall provide workstations and chairs as identified in this SOW. The characteristics of the items are specified below:

1. One Hundred (100) Warehouse Workstations Equal to Accella Workbench model

ACIWB4L7230 manufactured Populas Furniture Each Workstation shall consist of the following:

• Industrial Workbench shall be Approx. 83W x 33D with an hand-crank table adjustment of 30 inches on the lower height to 40 inches on the upper height (Adjustment range is Approx.)

• Industrial Workbench shall include high pressure laminated work-surface, Gray Color

• Industrial Workbench shall include back and side stops around edge of table. Approx. 2” to 3” in height

• Industrial Workbench shall include lower shelf with 2 dividers and approx. size of 17’ x

83”.

• Industrial Workbench shall include Racking and upper shelving unit for each unit.

Upper shelving unit shall be the same width as workbench top, Approx. 16” x 83”

• Industrial Workbench shall include fully extended keyboard arm with height adjustment and mouse tray

• Industrial Workbench shall include adjustable extension table mounted left of

Workbench with approx. table size of 33” x 28”. Extension table shall be adjustable up or down and independent of main work surface, approx. adjustment of 20”.

• Each Industrial Workbench shall be delivered as assembled

2. One Hundred (100) Workstation Stools

SP3300-16-Q-0152

Attachment 2 – Statement of Work (SOW)

• Air-adjustable height adjustment stools (Approx. 22” to 28” adjustment) with Polyurethane seats and casters. Gray color. Equal to part number 5704T82 in McMaster-Carr Catalog.

3. One Hundred (100) Anti-Fatigue Rubber Floor Mats 36” x 96”, ¼ inch thick, Color Black.

Equal to part number 6915T271 in McMaster-Carr Catalog.

3.1 PLACE OF Delivery

A. DLA Distribution Susquehanna PA Building 2001

3.2 PERIOD OF PERFORMANCE

A. The Government requires delivery of all materials identified in this SOW within 7 weeks after the date of contract award.

3.3 DAMAGES

A. The KO will provide a written list of items found to be damaged and/or lost to the Contractor within 7 working days of receipt of the items.

B. Except when loss and/or damage arises out of causes beyond the control and without the fault or negligence of the Contractor, the Contractor shall assume full responsibility for any and all goods lost and/or damaged in the movement covered by this contract. The Contractor and the KO or the GPOC shall visually inspect the damaged item(s). The Contractor will be advised in advance of any such deduction. Contractor repair or replacement of the item shall be completed within the time frame specified by the Contracting Officer or his representative.

SECTION 4 CERTIFICATION AND ACCEPTANCE

A. The GPOC is responsible for technical oversight of the Contractor’s performance. The GPOC shall perform all inspections on behalf of the Government and confer with the Contractor regarding any problems encountered in the acceptance of the items. The GPOC is designated as the point of final inspection and acceptance by the Government of all items required by the contract.

END OF STATEMENT OF WORK