SOW.pdf

Statement of Work (SOW) DDSP – Hydraulic Hack Sawing Machine

Background:

a. Requiring Organization Defense Depot Susquehanna PA

b. Purpose of the Statement of Work (SOW):

Purchase of new equipment for the accomplishment of today’s missions.

1. Scope of Work to be Performed by Contractor:

The contractor shall supply and deliver one (1) each hydraulic hack sawing machine.

All equipment furnished shall be new from the manufacturer’s most current production and meet current industry standards, and conform to the best quality of materials and workmanship. Accessories not specifically mentioned herein, but necessary to furnish complete system ready for use, shall also be included and named. All transportation/shipping and on-site installation shall be provided by the contractor.

Contractor shall supply all arrangements to get this equipment to the specified location stated in the contract.

Minimum Requirements:

One (1) each hydraulic hack sawing machine.

Miter cuts up to 45 degrees . Scale for exact adjustments of miters Floating vice for full use of saw blade Automatic shut off after finishing cut Automatic cutting pressure control system Capable of rapid lift of the saw bow Adjustable saw bow height Cutting range minimum: 90 Degrees Round 17”, rectangle 16” x 13”, 45 degrees Round 11”, square 10” x 10”.

Voltage: 208/3/60HZ Manuals: Operator, safety, and maintenance

Accessories – Listed above in minimum requirements.

Bundle clamp Machine Light Two (2) each Free-standing material support stand (size 18.5”-29.5H x 7.87 wide Four (4) Conveyors non-powered: 6’-6” long X 17.7” wide Eccentric material lifting feed roller

Colors – Manufacturer equivalent

Warranty Coverage - Warranty coverage shall be manufacturer’s standard warranty but not less than one year parts and labor.

Operator, Parts and Service Manual(s) – Supplied as stated in the minimum requirements.

Definitions of Terms and Abbreviations:

a. DDSP Defense Distribution Depot Susquehanna PA

b. SOW Statement of Work

2. Description of Contractor’s Tasks:

Task 1: Fabricate / Deliver one (1) each Hydraulic Hack Sawing machine

Government's responsibilities/ Scope of work:

a. Responsible for providing the contractor access onto the Depot and to the correct area.

b. Responsible for providing badges and requesting vehicle passes for the contractor.

c. Responsible for final inspection of the equipment making sure there is no damage to the equipment at time of delivery.

3. Delivery Address:

Defense Logistics Agency Defense Distribution Center Susquehanna, PA West Building 203 Door 12 5450 Carlisle PK Mechanicsburg, PA 17055

DODAAC: SB3300

Cost Center: 60620M6

4. Security Requirements:

Contractor shall comply with DDSP security requirements for on-site access for personnel and vehicles if necessary.