SOW WOTC FLOORS.pdf
PDF 88 KB Posted
- Attached to
- Resinous Flooring for WOTC
- Solicitation number
- 52600PR260018569
About this file
This is a Statement of Work for resinous flooring installation covering 3,528 square feet of concrete flooring with a completion deadline of October 30th.
The contractor shall perform three primary tasks: (1) substrate inspection and repair identification, including inspection of existing concrete and marking of cracks, joints, holes, spalls, surface defects, and depressions requiring patching or leveling, with the note that extensive substrate repair, structural concrete replacement, major leveling, or moisture mitigation beyond standard prep constitutes additional work; (2) mechanical substrate preparation through shot blasting and/or diamond grinding to remove surface laitance, contaminants, existing coatings, adhesives, and weak or unsound concrete, achieving the required concrete surface profile (CSP) per manufacturer specifications, and leaving the floor clean, sound, dry, and dust-free; and (3) supply and installation of the complete Durex–Impax Flooring resinous flooring system in accordance with manufacturer's written installation instructions, including manufacturer-approved primer/bond coat, resinous flooring body coats, aggregate/broadcast materials for slip-resistant texture, topcoat/sealer coat, and all associated system accessories required for a complete monolithic floor. The work area must be maintained within the manufacturer's temperature and humidity requirements during application and cure time, with all preparation, system installation, and curing fully completed before October 30th.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work Project: Resinous Flooring Installation
Area: 3,528 SF
Required Completion Date: Before October 30th
1. Work to Be Performed
The Contractor shall complete the following scope of work across 3,528 square feet of concrete flooring:
1. Substrate Inspection & Repair Identification
Inspect existing concrete prior to starting work.
Identify and mark cracks, joints, holes, spalls, surface defects, and depressions requiring patching or leveling.
Note: Extensive substrate repair, structural concrete replacement, major leveling, or moisture mitigation beyond standard prep is considered additional work.
2. Mechanical Substrate Preparation
Mechanically prepare the existing concrete substrate (3,528 SF) by shot blasting and/or diamond grinding.
Remove all surface laitance, contaminants, existing coatings, adhesives, and weak or unsound concrete.
Achieve the required concrete surface profile (CSP) per the resinous flooring manufacturer's specifications.
Thoroughly clean and vacuum the floor, leaving it clean, sound, dry, and dust-free.
3. Resinous Flooring System Installation
Supply and install the complete Durex – Impax Flooring resinous flooring system in strict accordance with the manufacturer's written installation instructions.
Installation build-up includes:
Manufacturer-approved primer / bond coat
Resinous flooring body coats
Aggregate / broadcast materials (slip-resistant texture as specified)
Topcoat / sealer coat
All associated system accessories required for a complete, monolithic floor.
2. Schedule & Completion Requirement
Project Completion Deadline: All preparation, system installation, and curing must be fully completed before October 30th.
Environmental Conditions: Work area must be maintained within the manufacturer's temperature and humidity requirements during application and cure time.
File details come from the government source that posted it. Updated .