SOW_UTV_July_2026_Redacted.pdf

Scope of Work (SOW) Project Title: PSU 311 Engineering Division UTV Acquisition

Date: July 10, 2026

Prepared For: Port Security Unit (PSU) 311 – Engineering Division

1. Purpose

This Scope of Work defines the requirements for the procurement and outfitting of one

(1) MACH-A1M Utility Task Vehicle (UTV) to support Port Security Unit (PSU) 311’s Engineering Division operations. Sourced as a specialized compact flight-line Maintenance and Cargo Hauler (MACH-MIL), this heavy-duty 6x4 diesel vehicle will serve as a highly mobile utility platform. It will provide all-terrain transport, critical engineering equipment hauling, and rapid maintenance response capabilities to support shoreside engineering, infrastructure repair, and logistics sustainment.

2. Technical Specifications

The contractor shall provide and deliver one (1) MACH-A1M UTV built on a heavy-duty diesel John Deere TH6X4D chassis. The vehicle, components, and accessories must meet or exceed the following specifications as detailed in the IAS GSA quotation:

2.1 Base Vehicle & Drivetrain

• Model: IAS MACH-A1M (Military Vehicle — MACH MIL compact flight-line Maintenance and Cargo Hauler)

• Chassis: John Deere TH6X4D heavy-duty utility vehicle chassis

• Engine: 3-cylinder, 4-cycle liquid-cooled diesel engine

• Displacement: 854 cc

• Power Output: 13.6 kW / 18.2 hp

• Fuel Compatibility: Diesel / JP8

• Fuel Capacity: 5.0 gallons (18.9 L)

• Transmission: Continuously Variable Transmission (CVT) with fully enclosed oil-bath final drive

• Traction Assist: Mechanically actuated differential lock

• Steering: Manual (non-power) steering

• Color & Finish: Olive Drab #34094

• Dimensions: Overall dimensions of approximately 60 in. (W) x 109 in. (L) x 75 in.

(H)

2.2 Tires & Suspension

• Tire Configuration: Six (6) wheels total (6x4 drivetrain):

• Front Tires: Two (2) 22.5x10.00-8, 2 PR high-flotation tires

• Rear Tires: Four (4) 25x12.00-9, 2 PR high-flotation tires

• Flat Mitigation: Multiseal Run-Flat Technology installed across all six tires

• Suspension:

• Front: Independent spring-over-shock, single A-arm design

• Rear: Two high-flotation, low-pressure tires on solid axles

2.3 Cargo Bed, Towing, & Rigging

• Cargo Box Type: Military Cargo Bed with removable steel/heavy-duty sides and a drop-in tailgate

• Bed Dimensions: Standard size of 56 in. (L) x 46 in. (W) x 8 in. (H)

• Bed Lift Mechanism: Integrated Power Lift Tilt Bed for automated dumping and cargo unloading

• Cargo Capacity: Bed payload capacity rated up to 1,200 lbs. (Total vehicle payload capacity: 1,600 lbs.)

• Towing Capacity: Minimum 1,400 lbs. towing capacity

• Coupler/Hitch: Available Pintle Hook

• Securing & Tie-Downs:

• Dedicated Vehicle Tie-Down Provisioning points for transport/airlift securement

• Integrated L-Track Cargo Tie-Down system along the cargo bed sides

• One (1) set of four (4) 209K Cargo Tie-Downs

2.4 Electrical & Safety Systems

• Power System: Dual Battery Package

• Alternator: 40-amp high-output alternator

• Cold Cranking Amps (CCA): 340 CCA battery rated @ -18°C (0°F)

• Ignition: Keyless ignition system

• Safety Features:

• Tektite Roll-Over Protective Structure (ROPS) with open station Operator Protective Structure (OPS)

• Integrated backup alarm

• Mounted fire extinguisher

• Dedicated rifle mount

• Seating: High-comfort bucket seats with heavy-duty Black Military Grade seat covers

• Utility Storage: Integrated cup holders and glove box

2.5 Front Cargo & Accessories

• Front Rack: Heavy-duty front rack / litter carrier for additional utility cargo or tactical medical evacuation support

3. Deliverables

The contractor shall provide and deliver the following items to the designated PSU 311 facility:

1. Fully Outfitted UTV: One (1) completed MACH-A1M 6X4 UTV meeting all physical and technical specifications outlined in Section 2.

2. Fueling: The UTV shall be delivered with a full tank of standard diesel fuel.

3. Documentation Package:

• One (1) printed and electronic set of technical manuals, including the Operator Manual, Parts Manual, and Service/Maintenance Manual.

• Warranty documentation: Standard 12-month or 1,000-hour CONUS warranty.

4. Ignition Keys: Keyless ignition capability and secure cable lock keys (if applicable).

4. Quality Standards

• Manufacturing Standards: All custom outfitting, heavy-duty electrical additions (such as the dual-battery configuration), and cargo bed modifications must conform to commercial-grade and military-specification tactical utility vehicle manufacturing standards.

5. Acceptance Criteria

The UTV will undergo a physical and operational inspection upon arrival at the PSU 311 facility by authorized unit representatives. Acceptance will be verified based on: