SOW_Upfit.pdf

General:

We would like to u pfit fire vehicles to fire specifications. Ford F250 Crew Cab SWB and 1 Ford Expedition Max

Specifications for fire vehicle upfit:

Fire Vehicle Color and Striping National Standards

• Blue lettering shall be Oralite 050 Blue or equivalent.

• Safety-yellow/green striping shall be {Red 204, Green 255, Blue 51 printed 6n white reflective and laminated), or equivalent in color. Striping and Vehicle Identification

• All stripes shall meet N FPA 1906 {current edition) standards and American Society for Testing and Materials {ASTM) D 4965 Standard Specifications for Retro- reflective sheeting for Traffic Control. Finish of the striping, numbering and emblems shall be void of air pockets or blemishes, and edges shall be smooth.

• All lettering and numbering shall be reflective in nature and conform to the minimum requirements of ASTM D 4956, Standard Specification for reflective Sheeting for Traffic Control, Type I, Class 1, or Class 3.

• All applicable signs, plates and labels listed in N FPA 1906 Standard for Wild land Fire Apparatus current edition are required. They shall be permanent in nature and securely attached and shall meetthe requirements of NFPA 1906 current edition and UL 969, Standard for Marking and Labeling System.

Additionally, they shall have resistance to damage from temperatures between -30° F and 176° F and exposure to oil, fuel, water, hydraulic fluids, or other fluids used in wild land firefighting.

• Service vehicles shall be equipped with bold block italicized blue lettering ranging in size from 3.5-12 inches with a variety of numbers and identifiers located on the doors (15ea, 3.5-inch character), apparatus body sides (8 ea., 4inch characters), front (8 ea., 4-inch characters), rear (4 ea., 4-inch characters), and Top-non italicized (4ea., 12-inch characters).

• Service units shall hav a 4-inth safety-yellow/green stripe positioned on the sides and back of the body and cab.

• The Service shield will be 12 inches in height and shall be placed on each front door, centered left to right, integrated with any striping. Centered at the bottom of the shield shall be the State and Unit identifier in 3.5-inch blue Block Bold italicized reflective lettering (example AZ-BAR). The lettering "U.S.

Fish & Wildlife Service" shall be centered above emblem in approximately 1.5 inch {sized to be equal to the width of the lower door) blue italicized reflective lettering.

• FIRE in 4-inch bold block italicized blue letters; one (1) on each side (integrated within in the 4-inch safety yellow reflective stripe, located at the rear of the apparatus body, driver side and passenger side.), one ( 1) on the front, and one ( 1) on the upper rear-facing driver side of the package.Numbers shall not be placed in an area that reduces visibility; across door seams or reflectors and lights (16 total characters). Command Identification (Optional)

• Each vehicle shall have 4-inch blue Block Bold italicized reflective numbers placed within, (or above) the striping above the front fenders (example BAT 503). Identifier shall not be placed in an area that reduces visibility, across door seams or reflectors and lights.

• A4-inch white stripe shall be positioned at the front of the apparatus on the wings of the bumper.

Within the 4-inch white reflective stripe, 3.5-inch blue Block Bold italicized reflective FIRE placed on passenger side of the front bumper. Identifier shall be centered horizontally and read lef tto right.

Within the 4 inch white reflective stripe, 3.5 inch blue Block Bold italicized reflective identifier will placed on in driver side.

• I

---- -. : ... - :- ---- .- - .L--■..___J .,-- , Console A commercially available Center Console shall be mounted between the two front seats using chassis/vehicle specific mounting kit. The console shall be modular in placement of mounted items and shall have the following items/accessories installed.

• The console shall have a minimum of four {4) additional 12-volt power sources, with covers, for recharging cell phones, orother similar battery-operated devices.

• Electrical Switch Panel-A switch panel shall be installed to operate the accessory lighting and equipment installed on the vehicle.

• Agency Radio Mounting Panel -Two radio panel blank filler plates or radio specific mounting plates shall be installed.

• Cup Holders -A minimum of two (2) cup holders shall be installed. Location of the cup holders shall be such that spilled liquid shall not interfere with electrical equipment.

• Map Light -A map light shall be installed to the passenger side of the console. The map light shall be a minimum of 12" in length, flexible, provide uniform light output with near zero glare. The light source shall betwo(2) 3W LEDs- oneforred and oneforwhite.

• Mounting Panel for PA Control Head- One mounting panel for PA control head shall be installed.

• Accessory Pocket-One open section of the console shall be supplied to allow storage of maps.

• Pre-Wire for Bendix King DMH Radio. Should include all wiring and components to allow radio to be "Plug and Play" in console.

Console should have two armrests that are fully adjustable.

Emergency Lighting:

Lightbar shall be Whelen Legacy Duo 54" R/C Corners GSPhoto, 2-G BAWD, 16-GBDLD OR Comparable

Additional lights should be Whelen Duo Linear Ion Red/White BLK or comparable. 8 per vehicle - 2 mounted on the rear tag, two mounted in the rear side windows and four mounted in the grill.

Rear window should have 2 Whelen Vertex LED-White or comparable

Rear bumper should have 2 Whelen Vertex Red or comparable

Front Bumper should have 2 Whelen Ion - T Linear clear or comparable.

Other:

Vehicles should have S windows tinted to 25%

Each vehicle should have a 5-pound fire extinguisher mounted on the rearseatfloorboard on the driver side.

A 100-watt speaker should be mounted inside the truck to attach to the radio.

A Radio antenna compatible with the Bendix King DMH Radio should be installed.

Each vehicle should have a Whelen 200-watt siren and lighting control system {29SSLSA6 or comparable) with PA mounted inside of the center console.

Each vehicle should have a Whelen low profile siren speaker 100 Watt (SA315P or comparable) mounted behind the grill or as appropriate.

Each vehicle should have a cell phone booster mounted which can be turned on/off through a control in the center console. (Drive Reach OTR by We Boost will be provided with each vehicle)