SOW Uniform Rental Service 3.27.2026r1.pdf

STATEMENT OF WORK (SOW)

FOR

UNIFORM RENTAL WEEKLY SERVICE-FIRE RETARDANT SHIRTS AND PANTS

AT

Edwards AFB, California

Prepared by:

Phillip Folson Jr. Chief, Maintenance and Logistics Operations Division AFMC Christina Calkins, Acquisition Project Specialist 445th TS/EWJ 27 March 2026 r1

Contents

GENERAL 3

HOURS OF OPERATION, SAFETY 4

SECURITY REQUIREMENTS 8

APPENDIX DEFINITIONS 11

ACRONYMS 12

GENERAL

1.0 PURPOSE

This contract requires a weekly uniform delivery service to the 445th Test Squadron of Personal Protective Equipment (PPE) for Electronic Warfare Joint Logistics (EWJX) Technicians (4 technicians).

2.0 BACKGROUND

Technicians with the 445 TS EWJX require PPE described as arc flash or Fire Retardant, Shirts and Pants. Fire Retardant clothing is required during events that require the technicians to be exposed to sparks from metal grinding, use of a Welder, or any other job requirements as part of their daily assignments.

3.0 SCOPE OF WORK

3.1 Initial consultation/demonstration on-site providing clothing options

3.2 Individual sizing for four (4) Technicians

3.2.1 CAT2 Shirt-ARC Flash/Fire Retardant QTY 6 each

3.2.2 CAT2 Pant-ARC Flash/Fire Retardant QTY 6 each

3.3 Weekly delivery service to Edwards AFB, building 1040

3.3.1 Drop-off of clean uniforms

3.3.2 Pick-up of soiled uniforms

3.3.3 Repair/Replace damaged articles occurred during the normal course of duties

4.0 PERIOD OF PERFORMANCE

4.1 The service should begin within 14 calendar days of Contract Award.

5.0 PLACE OF PERFORMANCE

5.1 The contractor shall perform the services in the Statement of Work at 40 Hoglan Ave BLDG 1040, Edwards

AFB, CA 93524

6.0 GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

6.1 Government Furnished Services. The Government will provide the following (as required):

6.1.1 The Air Force Test Center (AFTC) will provide access to secure areas within 412 EWG Compound

6.1.2 Escort and security monitoring will be coordinated during work performance as required

6.1.3 All Equipment required will be provided by the contractor

6.1.4 Any staging areas or laydown spaces will be coordinated in advance.

6.2 Emergency Medical Services. Edwards AFB will provide emergency medical services for contractor personnel in performance of services under this contract IAW AFMAN 41-210 Chapter 2. The contractor shall ensure that the Government is reimbursed at the full-reimbursement rate for emergency medical services provided. The contractor shall provide the 412th Medical Group the name of a physician and/or hospital to which injured personnel can be transferred for further treatment and care after receiving initial emergency treatment on base. All mishaps will be promptly reported to the base safety office through the Government Project Manager (GPM).

6.3 Security Police and Fire Protection. Phone number for Edwards AFB Security Forces Squadron, 661-277-

3340; Emergencies (Fire/Security Forces/Medical), 911.

6.4 Government Furnished Materials. NONE

7.0 DELIVERABLES

7.1 Delivery schedule (days of the week and times for delivery).

The contractor shall be responsible for delivery of all required materials.

The contractor shall notify the Inventory Management Specialists Mr. Eric Hamilton at (661) 277-5426 or Ms.

Monique Draper at (661) 277-5423 and Acquisition Specialist Ms. Christina Calkins (661) 277-3375, to arrange the first delivery. If base access is needed, please provide the list below, seven (7) days prior to the expected arrival date.

The contractor shall provide a completed “Site Support Visit Request”, with the following information for all personnel that are required to complete the installation on-site no later than seven (7) days prior to the agreed upon arrival date:

1. Name(s)

2. Company Name or Organization

3. Social Security Number (SSN)

4. Driver’s License No./State

5. Date and place of birth

6. US citizenship (declare Yes or No)

7. Date(s) of Visit and Length of visit (provide approximate dates)

8. Purpose of visit: Contractor Visit, Job Walk, etc

9. Length of visit (provide approximate dates)

Point of Contact and phone number: Edwards AFB – Ms. Monique Draper at (661) 277-5423

The contractor shall provide, if requested, verification that all required vehicles have valid registration and insurance documentation, which may be checked prior to entering the work site or the base.

8.0 Point of Contact

Inventory Management Specialist Mr. Eric Hamilton, eric.hamilton.29@us.af.mil at (661) 277-5426 Inventory Management Specialist Ms. Monique Draper, monique.draper.1@us.af.mil at (661) 277-5423 Acquisition Specialist Ms. Christina J. Calkins, christina.calkins.1@us.af.mil 661-277-3375

8.1 Additional Information

8.1.1 Inherently Governmental Function. The Contractor shall not perform Inherently Governmental functions as defined in FAR Subpart 7.5 in relationship to this SOW.

HOURS OF OPERATION, SAFETY

mailto:eric.hamilton.29@us.af.mil mailto:monique.draper.1@us.af.mil mailto:christina.calkins.1@us.af.mil

10.0 GENERAL INFORMATION

10.1 Hours of Operation. The services required under this contract will primarily be completed between the following hours: 7:30AM – 4:30PM, Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. Any additional work requiring an extended duty day or weekend shifts shall be coordinated through the government for approval no later than 24 hours in advance. On occasion, the contractor will be required to work on weekends and Federal Holidays. These instances will be worked out in advance between the Government and the Contractor. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this SOW when the Government facility is not closed for the above reasons.

10.1.1 Recognized Holidays. Contractor is not required/permitted to perform services on the following holidays.

*If the holiday falls on a Saturday, it will be observed on the preceding Friday. If the holiday falls on Sunday, it will be observed on the following Monday.

10.1.2 Work Schedules, Leave, and Absences. The contractor shall provide the government with a performance schedule for the project. Any changes in the schedule shall be coordinated with the government in advance.

10.2 Contract Personnel

10.2.1 Alcohol/Drug Use. The consumption of alcoholic beverages or illegal drugs by Contractor personnel, while on duty, is strictly forbidden. The Contractor shall immediately remove any employee who is under the influence of alcohol or drugs.

10.2.2 Appearance. Contractor personnel shall present a neat appearance. Contractor’s uniform must be easily recognized. This shall be accomplished by wearing distinctive clothing bearing the name of the company and by wearing badges that contain the company name and employee name.

10.2.3 Certifications. Contractor employees shall have current and valid certified professional laundry certifications and licenses required to perform the work in this SOW, prior to contract award. All certification and licensing requirements by Federal, State, and local agencies shall be complied with at the Contractor's expense.

10.2.4 Contractor Qualifications.

10.2.4.1 The Contractor shall utilize employees possessing adequate training, skills, and knowledge to perform the requirements of this contract.

10.2.4.2 Personnel must be U.S. citizens and may be subject to background screening or escort requirements

10.2.5 Privately Owned Vehicles. Each Contractor employee driving a privately owned vehicle on the installation must carry minimum liability insurance as required by the State. Contractor employees shall adhere to all posted speed limits and shall not use hand-held cellular telephones while driving on the installation for phone calls or texting. Use of seat belts is mandatory. Any Contractor employee cited for driving under the influence will have their driving privileges immediately revoked for a period to be

New Year’s Day Labor Day Martin Luther King Jr’s Birthday Day Columbus Day President’s Day Veterans Day Memorial Day Thanksgiving Day Independence Day Christmas Day Juneteenth NA determined.

10.3 Safety

It is the contractor's responsibility to ensure its employees and managers have a comprehensive understanding of and full compliance with OSHA requirements. Detailed information is available on the OSHA website at http://www.osha.gov. It is the contractor's sole responsibility for compliance with OSHA, Public Law 91-596.

The contractor shall comply with all federal, state and local laws, and Air Force Instructions for the protection of their employees while working on an Air Force Installation or property. The protection of contractor employees is exclusively the obligation of the contractor. Contractors shall manage all work areas to ensure the safety of building occupants, base personnel, or visitors in or near the areas. The contractor must ensure that personnel are properly trained on the equipment they are tasked to operate. The contractor shall develop site specific mishap reporting procedures which result in damage to government property or injury to Air Force personnel. These procedures are to be included in the safety and health plan for review. In accordance with AFI 91-202, Safety Office. Safety personnel will: Review contractor Safety plans to ensure materials used or operations conducted do not endanger public safety and government personnel or property.

The contractor shall perform work in a safe manner as required by OSHA Safety and Health Requirements.

Provide a verbal report to the CO as soon as possible of each occurrence of damage to Government property or an accident resulting in death, injury, occupational disease, or adverse environmental impact. Provide a completed copy of the required Accident Investigation Reports to the CO within five calendar days of each occurrence.

The Contractor’s plan shall include appropriate measures to ensure the Contractor reacts promptly to investigate, correct and track alleged safety & health violations and/or uncontrolled hazards in contractor work areas.

The plan shall:

a. Demonstrate a management commitment to employee safety and health.

b. Identify the application of the safety and health plan to subcontractors.

c. Identify the roles and responsibilities of the following individuals:

Management Supervisors Employees Safety Coordinator

d. Identify applicable safety rules and regulations

e. Include a worksite hazard analysis to include base-line hazard identification and required control measures

f. Include a job site analysis to include hazards of tasks required to control measures

g. Identify employee safety and health training requirements and the documentation process

h. Include a workplace inspection frequency, to include identifying the individual conducting the inspections

i. Include employee hazard reporting procedures

j. Identify individual(s) responsible for corrective action hazards

k. Identify first aid/injury procedures

l. Identify procedures for accident investigation and reporting

m. Identify emergency response procedures; and

n. Identify the process for tracking controlled hazards in contractor work areas

10.3.1 Safety Equipment. The Contractor shall furnish personal safety equipment for its employees in performance of this contract. Safety equipment includes shoes or boots, eyewear, respirators, and gloves, etc.

10.3.2 Safety Threats. The Contractor shall not employ persons for work on this contract if such http://www.osha.gov/ http://www.osha.gov/ employees are identified to the Contractor by the CO as a potential threat to the health, safety, security, general well-being or operational mission of the installation and its population.

10.4 Conservation of Utilities. The Contractor shall instruct employees in utilities conservation practices. The Contractor shall be responsible for operating under conditions that preclude the waste of utilities.

10.5 Contractor Furnished Property and Services. Except for those items or services specifically stated to be Government-furnished in Section 6.0 and any appendixes, the Contractor shall furnish everything required to fulfil this contract in accordance with all of its terms.

10.6 Environmental Protection. The Contractor shall comply with all applicable Federal, state, and local laws, regulations, and standards, including Air Force and installation policies, directives and instructions, that are or may become applicable to the Contractor’s activities in performance of this contract.

10.7 Audit. This contract may be subject to audit by any and all cognizant Government agencies. The Contractor shall make available all records, which it maintains with respect to this contract, to such agencies.

10.8 Miscellaneous Paragraphs

10.8.1 Official Correspondence. The Government singularly identifies each project with a contract number at the time of award. The contract number is a unique identifier to purposely and permanently represent an awarded project. The Government issued contract number is to be referenced on all official communication starting upon notice of the award.

10.8.2 Post Award Conference. The Contractor agrees to attend any post award conference convened by the Contracting Officer IAW FAR Part 42.5. These meetings shall be at no additional cost to the Government.

10.8.3 Records. All records created and received by the Contractor in the performance of this contract shall be maintained and readily accessible. Records shall remain the property of the Government.

10.8.4 Insurance. The contractor shall obtain the necessary insurance as required by FAR part 28.3.

The minimum amounts of insurance will be maintained IAW FAR 28.307-2.

10.8.5 Fire Prevention. The Contractor shall take all necessary precautions to prevent fires in the units and

Contractor-furnished and Government-furnished facilities while performing any work under this contract. In the event fires do occur, the Contractor shall immediately notify the Base Fire Department at 911. The Contractor shall then notify the requiring activity and the CO. The Contractor shall brief and document its employees monthly in fire safety issues and procedures in reporting fires.

10.8.6 Inclement Weather. If the base closes due to inclement weather, the Contractor will be released, by the installation commander, with the general population of the base at no decrement to contract price.

The Contractor will follow the local procedures for reporting in inclement weather as advertised on local television and radio stations.

SECURITY REQUIREMENTS

11.0 SECURITY REQUIREMENTS

All Contractor employees will be subject to a criminal history background check IAW DoDM 5200.08V3_AFMAN 31-101V3, Installation Perimeter Access Control, and 412th Test Wing Base Defense Plan (BDP) 31, Volume I (the AFMAN and BDP are both limited access documents but more details on the requirements/process in terms of background checks can be provided by the Contracting Office upon request). Vehicle registration, proof of insurance, and a valid driver's license must be presented for vehicles. Installation Commanders may deny access and credentials based on information obtained during identity proofing and vetting that indicates the individual may present a threat to the good order, discipline, and morale of the installation.

Base Access. For Contractor personnel requiring frequent base access to perform work at Edwards AFB will be granted access via an Edwards AFB Form 496, Application for Defense Biometric Identification System (DBIDS) Card. The Prime Contractor shall submit a written request on company letterhead to the CO with the following information (prior to submitting a request for Base access via an Edwards AFB Form 496): 1) contract number, 2) location of work, 3) contract start and stop date (must be on or before contract’s expiration date), and 4) names of employees/ subcontractor employees needing access to the base, to include each employee’s company name.

It is recommended that the Prime Contractor provide a copy of the request letter to each employee for verification purposes when the employee comes to the Contracting Office at Building 2800 to get their Edwards AFB Form 496 signed. Employees for which no request letter can be found or provided will result in the employee being asked to return on another date/time so verification can be made.

Base passes will be limited to the length of the contract not to exceed 3 years from the date the Edwards AFB Form 496 is submitted to the Contracting Office for signature.

The Edwards AFB Form 496 will be reviewed/approved by the CO, then taken by the Contractor employee to the Edwards AFB Pass & Registration Office in Building 3000, or the Visitor Control Center in Building 1004, for authentication and issuance of the Base pass.

The contractor shall comply with all base security regulations. Additionally, the contractor shall comply with actions dictated by force protection condition (FPCON) changes/measures and/or health protection condition (HPCON) changes/measures. For real-world situations/exercises, changes to force/health protection conditions could impact contractor performance of work and can include denial of access to the installation to perform work

Only employees who will be working on the contract consistently/frequently should be submitted for a long-term Base pass.

The Contractor shall comply with all security requirements imposed by the Installation. Specific security considerations will be handled on an individual Task Order/contract basis as required.

The contractor shall report suspicious activity (refer to Edwards AFB Contractor Antiterrorism Awareness pamphlet) to Security Forces at 661-277-3340 in a timely manner.

The Contractor and its employees shall comply with all base traffic regulations.

Visitors/contractors with driver’s licenses and ability to obtain base access without another form of identification as an identity proofing document. As proof of identify, the Department of Defense will accept State-issued driver's licenses and identification cards only if they meet the Real ID Act standards, from all U.S. States and territories as proof of identity. The Contractor shall possess a credential compliant with the REAL ID Act of 2005 or an acceptable alternate identification credential. Please visit the Department of Homeland Security's (DHS) website to get the latest information, https://www.dhs.gov/current-status-states-territories.

Contractor shall maintain and make available to the GPM, within 30 days after award, records of Antiterrorism Awareness Level I required training of contractor employees and subcontractor employees who require routine physical access to the installation via 30 day pass, DBIDS Access card or Common Access Card (CAC), both initially and annually thereafter. AT Level I training provides contractor employees with the requisite knowledge necessary to remain vigilant for possible terrorist threats. Level I AT Awareness Training may be taken at https://jkodirect.jten.mil/Atlas2/page/login/Login.jsf for non- CAC holders. CAC holders may complete AT Level I training (Force Protection course ZZ133079) via myLearning at https://lms-jets.cce.af.mil/moodle/. Tracking for each contractor or subcontractor employee is the responsibility of the COR or unit Antiterrorism Representative.

The Contractor shall be responsible for safeguarding all government property, equipment and materials provided for Contractor use. At the end of each work period, all government facilities, equipment, and materials shall be secured.

During performance of the contract, the Contractor shall be responsible for obtaining required identification for newly assigned personnel.

The Contractor shall be responsible for prompt return of credentials and vehicle passes for: 1) any employee who no longer requires access to the work site; 2) upon request by a CO; and 3) upon completion or termination of the contract. The Prime Contractor shall ensure that all Base identification passes issued to employees and subcontractor employees are returned to the issuing office. Failure to comply with these requirements may result in the withholding of payment.

Contractor employees are prohibited from possessing weapons, firearms or ammunition, on themselves or within Contractor-owned or privately owned vehicle while on Edwards AFB.

11.1 OPSEC-The Contractor shall comply with DOD, USAF, and locally established Operations Security (OPSEC) policies and procedures to protect sensitive and unclassified information and/or equipment, which is furnished to and operated by the Contractor, and prevent compromise of classified information and equipment.

Contractor shall maintain Operations Security (OPSEC) in accordance with DOD Directive & Manual 5205.02, DOD Operations Security (OPSEC) Program, AFI 10-701, Operations Security (OPSEC), and Edwards AFB OPSEC policies and procedures.

Completion of OPSEC Training of contractor employees offered by the Government IAW AFI 10-701, para. 4.1 and 4.2.3 shall be required of all Contractor employees within 30 days of initiating work. Access to mission critical information will not be allowed until OPSEC education has been completed and documented. This training provides Contractor employees with the requisite knowledge necessary to remain vigilant for possible threats, understand basic security procedures, understand the obligation to report security violations and the continued obligation to safeguard information. The requiring unit Security Manager/OPSEC Coordinator will coordinate, and track completed training with the Contractor.

https://www.dhs.gov/current-status-states-territories https://jkodirect.jten.mil/Atlas2/page/login/Login.jsf https://lms-jets.cce.af.mil/moodle/

Contact the unit Security Manager/OPSEC Coordinator or Wing OPSEC Signature Manager at (661) 277- 2066 for questions or reporting.

APPENDIX DEFINITIONS

Contract Administrator (CA). The individual within the contracting office who performs the day-to-day administration of the contract. The contract administrator may also be the contracting officer.

Contracting Officer (CO). The duly appointed Government agent authorized to award or administer contracts.

The contracting officer is the only person authorized to contractually obligate the Government.

Corrective Action Report (CAR). Used to document unacceptable performance by the Contractor.

Defect. Any non-conformance with requirements specified in the contract.

Defective Service. A service output that does not meet the standard of performance specified in the contract for that service.

Government Furnished Property (GFP). Facilities, equipment, tools, supplies, parts, or any other items furnished for the concessionaire's use by the Government.

Major discrepancy. A major finding is defined as a condition that would endanger personnel, jeopardize equipment or system reliability, affect safety of flight, or warrant discontinuing the process or equipment operation.

Minor discrepancy. A minor finding is defined as an unsatisfactory condition that requires repair or correction, but does not endanger personnel, affect safety of flight, jeopardize equipment reliability, or warrant discontinuing a process or equipment operation.

Performance Assessment. A process that measures success towards achieving defined performance objectives or goals defined within the performance thresholds in the services summary or the process of assessing progress towards achieving the objectives/goals developed in a performance plan or partnering agreement.

Performance Indicator. A measurable characteristic of an output of a work process. Generally synonymous with attribute.

Performance Management. The use of performance measurement information to effect positive changes in organizational culture, systems, and processes, by helping to set agreed upon performance goals, allocating and prioritizing resources, informing managers to either confirm or change current policy or program directions to meet those goals, and sharing results of performance in pursuing those goals.

Quality Assurance (QA). Those actions taken by the Government to ensure services meet the requirements of the Statement of Work (SOW).

Quality Assurance Program Coordinator (QAPC). The individual designated by the contracting squadron commander to manage the installation QA program.

Quality Control (QC). Those actions are taken by a Concessionaire to control the performance of services so that they meet the requirements of the SOW.

Standard. An exact value, a physical entity, or an abstract concept, established and defined by authority, custom, or common consent to serve as a reference, model, or rule in measuring quantities or qualities, establishing practices or procedures, or evaluating results. A fixed quantity or quality. A defined measure of comparison.

ACRONYMS

AF Air Force AFB Air Force Base AFFARS Air Force Federal Acquisition Regulation Supplement AFI Air Force Instruction AFMC Air Force Material Command AFMAN Air Force Manual AT Awareness Training CAC Common Access Card CO Contracting Officer DAFI Department of the Air Force Instruction DBIDS Defense Biometric Identification System DHS Department of Homeland Security DOD Department of Defense DTTR OL-E Digital Test & Training Range Operating Location-Edwards FAR Federal Acquisition Regulation FPCON Force Protection Condition GFE Government-Furnished Equipment GFP Government-Furnished Property GPM Government Project Manager IAW In Accordance With ICD Intelligence Community Directive OPSEC Operation Security OSHA Occupational Safety and Health Administration QTY Quantity PPE Personal Protective Equipment SOW Statement of Work USAF United States Air Force