SOW TANK AND BILGE CLEANING NEAH BAY RS.docx

DOCX document 29 KB Posted

Attached to
CGC MOBILE BAY TANK AND BILGE CLEANING
Solicitation number
70Z04023Q60105Y00
Issued by

View the file

Other files

File Type Posted
70Z04023Q60105Y00 RFQ.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CGC Mobile Bay Bilge Cleaning Statement of Work In accordance with PR

Bilge cleaning is required onboard CGC Neah Bay and bilge liquids may need removal.

Location:

U.S. Coast Guard Cleveland 1055 East 9th Street Cleveland, OH 44114

Cleaning

The following bilges need to be high pressure cleaned with hot water and degreaser to remove all oil, grease and other surface contaminants from deck plates down. Please ensure not to damage any electrical components or engines components. Ship will be pier side so ensure that we follow Cleveland environmental standards. Initial (code B) cleanings for both the ballast tank and bilges will take place on roughly late August, final (code A) bilge cleanings will take place on roughly early October to ensure clean bilges. The ballast tank will not receive a code A cleaning. This will be two separate cleanings.

The Contractor shall properly remove and dispose of all materials in compliance with applicable federal, state, and local environmental laws and regulations. Contractor assumes all responsibility and liability for the transport and proper disposal of materials and in particular the following requirements:

If a spill occurs, the CG Yard POC & CG Base Cleveland must be immediately notified.

Contractor must submit disposal sites to CG Yard POC for site approvals and copies of Bill of Lading or waste manifests.

Bilge Cleaning Conditions: All of the aforementioned bilges are to be cleaned in accordance with the following CG Yard cleanliness conditions. The Contractor may encounter oily water, solids, sludge, and various debris while cleaning the bilges. The Contractor shall provide proper cleaning equipment to clean under numerous structural members and inside pockets, as well as machinery foundations, where liquids collect.

Condition Code (A), clean for use.

1. All material removed to eliminate all substances, including but not limited to liquids, solids, sludge, debris, rags and cleaning liquids

2. This condition will require a detergent cleaning and wiped DRY.

3. This condition may require a gas free certificate.

Condition Code (B), clean to Gas Free.

1. All material removed to eliminate all volatile substances including but not limited to liquids, solids, sludge, debris, rags, and cleaning liquids.

2. This condition will require a detergent cleaning and wiped DRY. Some tanks (i.e., sewage, grey water) may require bleaching prior to cleaning to assist in removing any residue from surface.

3. This condition shall require a Gas Free certificate.

Tank Cleaning Capacity (Gallons)

Ballast 2-76-3-W 1360

Bilges Capacity (SQFT)

Engine Room1700
Motor Room 4-61-0-E900
Strainer Room 4-45-0-Q680
Aft Steering100

Bilge Liquid Removals 1000 Gallons

Bilge Cleaning Conditions: All of the aforementioned bilges are to be cleaned in accordance with the following USCG Yard cleanliness conditions.

File details come from the government source that posted it. Updated .