SOW - Spindle Repair.docx

STATEMENT OF WORK (SOW)

CMXG 532nd Spindle Re-build

U.S AIR FORCE

309TH COMMODITIES MAINTENANCE GROUP (cmxg)

CMXG 532nd Spindle Re-build

PAGE \* MERGEFORMAT i

TABLE OF CONTENTS

SCOPE

This Statement of Work (SOW) defines the Spindle Re-build. The contractor shall provide all labor, supplies, tooling, and equipment required to rebuildd and refurbish spindles back to original manufacturer specifications. The services shall be performed at the contractor’s facility in support of the 309 Commodities Maintenance Group (CMXG) located at Hill Air Force Base (AFB), Utah.

BASIC SERVICES

The contractor shall rebuild four spindles to bring them to OEM specifications.

The Government will ship the Government Furnished Property (GFP)spindles to the Contractor’s facility for the rebuild.

The contractor shall perform an overhaul of each spindle to evaluate requirements needed to bring the spindles back to OEM standards.The Contractor shall perform a visual check for the current state functionality and evaluate how extensive of any overhaul the spindles will need. Then the contractor shall overhaul back to manufacturers operating requirements. Comment by PADGETT, DAVID N CIV USAF AFMC OL_H/PZIMB: Suggestion: The contractor shall perform an overhaul of each spindle to evaluate requirements needed to bring the spindles back to OEM standards Once the spindle rebuilds are completed, the contractor shall perform a functionality check The rebuild process will be documented on a Process Completion Report n Certification for every component (CDRL A001). The contractor shall provide a one Process Completion Report to include all component; written document for the processed components; this document certifies completion of each spindle being rebuiltfurbished back to the original manufacturing specifications.

After all, rebuilds are completed, the contractor shall ship the spindles back to Hill AFB.

The contractor shall provide a standard commercial warranty on the rebuilt spindles.

GENERAL SERVICES

0. GOVERNMENT FURNISHED PROPERTY (GFP)

GFP will be issued via hand receipt to the contractor. Comment by PADGETT, DAVID N CIV USAF AFMC OL_H/PZIMB: How many spindles are we dealing with? We do not use hand receipts unless we are in the 100s or 1000s. If there are a few spindles, then we will generate a GFP list and this bullet goes away.

The contractor shall safeguard all GFP placed into the contractor’s care.

While GFP is in the contractor’s possession the contractor is liable for any loss, damage, destruction, or theft.

The contractor is responsible for returning all GFP to the Government after repair is complete at the destination specified in the contract, FOB destination unless directed otherwise in writing by the CO.

Appendix A – ACRONYM AND ABBREVIATION LIST

Acronym/Abbreviation Definition

image1.jpeg