SOW Slitting_Die Cutting and Rewinding Machine.docx

25 KB Posted

Attached to
Slitting, Die-Cutting, & Rewinding Machine
Solicitation number
W911KF-26-S-0016
Issued by

About this file

Written by GovTribe AI ·

This is a Statement of Work (SOW) for the procurement of one Made in USA 3-in-1 Slitting, Die-Cutting & Rewinding Machine for Anniston Army Depot. The machine must be manufactured, assembled, and tested entirely in the United States with U.S.-sourced major components including the frame, shafts, motors, control panel, knives, and dies. The machine shall support web widths of 10-26 inches with 16 preset knife locations capable of slitting materials from 1/8 inch to 3 inches wide. It must include a rotary die-cutting station supporting both solid rotary dies and magnetic cylinders, a dual-shaft rewinder with core sizes of 1, 1.5, and 3 inches, and a servo-controlled tension system. The machine requires a UL-listed electrical control panel with PLC touchscreen HMI interface, emergency stop systems, OSHA-compliant guarding, and support for automatic length counting, batch counting, and fault alarms.

The SOW specifies compliance with OSHA 29 CFR 1910 machine guarding standards, UL 508A industrial control panels, and ANSI B65 converting equipment safety standards, along with Buy American Act requirements. Power requirements are 208V/230V/460V, three-phase with 3-7 kW total power consumption. Deliverables include the complete machine, operator and maintenance manuals, electrical schematics, a spare knife set, and one magnetic cylinder or solid rotary die. The vendor must provide FOB Destination delivery to Anniston Army Depot, installation, commissioning, and a minimum of four hours of operator training. A minimum 12-month full warranty with U.S.-based technical support and parts availability is required.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

📄 MADE‑IN‑USA SOW

Title: Statement of Work (SOW) – 3‑in‑1 Slitting, Die‑Cutting & Rewinding Machine (Made in USA) Location: Anniston Army Depot Prepared For: Procurement Package

1.0 Scope

This Statement of Work (SOW) defines the requirements for the procurement of one (1) Made‑in‑USA 3‑in‑1 Slitting, Die‑Cutting & Rewinding Machine capable of slitting, rotary die‑cutting, and rewinding roll materials in a single continuous operation. The machine must support 16 slit sizes ranging from 1/8 inch to 3 inches.

2.0 Applicable Documents

The contractor shall comply with the following standards:

· OSHA 29 CFR 1910 – Machine Guarding

· UL 508A – Industrial Control Panels

· ANSI B65 – Converting Equipment Safety Standards

· Buy American Act (BAA)

3.0 Requirements

3.1 Country of Manufacture

· Machine must be manufactured, assembled, and tested in the United States.

· Major components (frame, shafts, motors, control panel, knives, dies) must be U.S.‑sourced unless otherwise approved.

3.2 Machine Capabilities

3.2.1 Web Handling

· Max web width: 10–26 inches

· Min slit width: 1/8 inch (3.175 mm)

· Max slit width: 3 inches

· Slit positions: 16 preset knife locations

· Material thickness: 0.8–10 mil (20–250 microns)

3.2.2 Slitting System

· Razor, shear, or score knife

· Accuracy: ±0.004 in (±0.1 mm)

· Knife count: 8–24

· U.S.‑made EPC (edge position control)

3.2.3 Die‑Cutting System

· Rotary die‑cutting station

· Supports solid rotary dies or magnetic cylinders

· Registration accuracy: ±0.006 in

· Kiss‑cut and full‑cut capability

3.2.4 Rewinding System

· Dual‑shaft rewinder

· Core sizes: 1 in, 1.5 in, 3 in

· Max rewind diameter: 12–20 in

· Servo‑controlled tension

4.0 Controls & Safety

· PLC touchscreen HMI

· UL‑listed electrical panel

· OSHA‑compliant guarding

· Emergency stop and interlocks

· Automatic length counting, batch counting, and fault alarms

5.0 Power Requirements

· 208V / 230V / 460V, 3‑phase

· Total power: 3–7 kW

6.0 Deliverables

· One (1) complete machine

· Operator and maintenance manuals

· Electrical schematics

· Spare knife set

· One (1) magnetic cylinder or one (1) solid rotary die

7.0 Shipping & Installation

· FOB Destination – Anniston Army Depot

· Vendor shall provide installation and commissioning

· Vendor shall provide operator training (minimum 4 hours)

8.0 Warranty

· Minimum 12‑month full warranty

· U.S.‑based technical support and parts availability

File details come from the government source that posted it. Updated .