SOW Sea Containers Stand Alone Orders 1 June 2022 (003).pdf

STATEMENT OF WORK

FOR

40 FOOT SEA CONTAINERS

Utah Test and Training Range (UTTR)

1 June 2022 (Stand Alone Orders)

1. SCOPE: Complete separate, single orders for 24 each, 40 foot sea containers, a commercial item as defined in FAR 2.101.

2. DELIVERY INFORMATION: The Government reserves the right to restrict access to the Utah Test and Training Range of any contractor employee, or prospective contractor employee, who is identified as a potential threat to the health, general well-being, safety, security, or operational mission of the installation and its population. A background check will be performed prior to installation access. Any visitors will be required to be a US Citizen and to possess a valid identification card and/or driver’s license.

2.1 Dugway (South Range): Deliver to HQ UTTR/Det 1, 1010 Avery Rd, Dugway, UT 84022-1103. South Range, Dugway, UT approximately 94 miles from Salt Lake City, UT (45 miles west then south 49 miles) off I-80 at Dugway/Rowley Exit 77.

2.2 UTTR Oasis Complex (North Range): I-80 West, Exit 62 (Military/Lakeside) then 17 miles north on the county road. Use the phone in the call box to contact “Oasis Security”, who will then inspect the vehicle and direct you from there.

2.3 POC’s: Jerry Thornton (435) 831-5393, Bill Hanson (435) 831-5449, or Eric Murray (435) 830-4078.

2.4 Deliveries must be made on Monday – Thursday, 0700-1600 ONLY. No Weekends (Friday, Saturday or Sunday). No Federal Holidays. 24 hours’ notice prior to delivery is required.

2.5 ESTIMATED PERFORMANCE PERIOD/DELIVERY DATES:

Delivery On or Before 31 May 2022

3. GENERAL INFORMATION: Sea containers are used on the Utah Test and

Training Range to construct targets and there must be a supply on hand at all times.

4. REQUIREMENTS: The sea containers must meet the following specifications:

4.1 SIZE: STANDARD OR HIGH CUBE

4.1.1 Length: 40’

4.1.2 Width: 8’

4.1.3 Height: 8’ 6”

OR

4.1.4 Length: 40’

4.1.5 Width: 8’

4.1.6 Height: 9’ 6”

4.2 CONSTRUCTION:

4.2.1 Must be constructed of corrugated metal

4.2.2 Standard Corner Castings (to facilitate lifting with a crane)

4.2.3 Welded seams

4.2.4 Door- standard double doors on one end, lockable

4.3 ADDITIONAL REQUIREMENTS

4.3.1 The cargo containers must be stackable.

4.3.2 The cargo containers shall have initially been manufactured to meet

International Organization for Standardization (ISO) standards.

4.3.3 No holes over 6 inches and it must not take away from the strength of the containers.

4.3.4 Dents no larger than 12 inches in diameter.

4.3.5 Minimum rust is acceptable as long as it does not reduce the strength and stacking of the containers.

4.3.6 They must be used containers.

4.3.7 Any color of container is acceptable.

5. REPORTS: The contract number and delivery date must be clearly visible on each invoice.

6. SPECIAL CONSIDERATIONS: A point-of-contact (POC) to sign for deliveries and be responsible to receive invoices will be made available on delivery dates (Monday thru Thursdays, 0700-1600 ONLY).

7. POC: (Dugway / South Range / North Range)

HQ UTTR/Det 1 1010 Avery Rd.

Dugway, UT 84022-1103

Jerry Thornton (435) 831-5393 Eric Murray (435) 830-4078