SOW SAM.GOV.pdf

STATEMENT OF WORK

C-band Single Mode high power gain-flattened fiber amplifier with 10Watt output power and output isolation

Oct. 5, 2022

1. Objective/Requirements The PO is to purchase a C-band single mode high power gain-flattened fiber amplifier with 10Watt optical output power and internal output isolation. Its output power is tunable between 1 and 10 Watt and shall be stable in the laboratory environment for at least a year. The lead time for the amplifier is less than 3 months after the order is placed.

2. Characteristics, Scope, and Specs

The high power amplifier shall have all the listed functions:

(1) Wavelength range: 1545-1560nm

(2) Gain Flattening Filter: Yes. Gain flatness <5dB in the wavelength range defined in (1)

(3) Optical Input Linewidth Requirement: >1GHz

(4) Output power: Tunable between 1 and 10 Watt.

(5) Output isolation: >23dB

(6) Input fiber type: SMF-28

(7) Input fiber length: 3 meter

(8) Input fiber jacket: 3mm OD

(9) Input connector: FC/APC (cone type preferred)

(10) Output fiber type: SMF-28

(11) Output fiber length: 3 meter

(12) Output fiber jacket: 3mm OD

(13) Output connector: FC/APC (cone type preferred) (14)

(15) Control and Communication Interface: RS-232

(16) Warranty: Continuous operation, 1 year minimum.

3. Place of Performance Greenbelt, MD

4. Period of Performance The purchase is for laboratory testing at GSFC only and does not include any outside work.