SOW RS Calibration 2022.pdf

220 KB Posted

Attached to
R & S Calibration
Solicitation number
NB671000-22-01471
Issued by

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

STATEMENT OF WORK

TITLE: Rohde & Schwarz Equipment Calibration

LAB REQUESTING SERVICE: National Institute of Standards and Technology (NIST), Communications Technology Laboratory (CTL), Public Safety Communications Research

(PSCR)

A. BACKGROUND INFORMATION

PSCR laboratories provide research, development, testing, and evaluation to foster nationwide public safety communications interoperability. To be able to accurately test, monitor, and measure LMR and LTE signals within NIST standards, the below Rohde and Schwarz equipment needs to be calibrated periodically to manufacturer standards. To meet these standards, PSCR must maintain a manufacturer-approved American Association for Laboratory Accreditation (A2LA) and International Organization for Standardization (ISO) certified calibration with uncertainties and guardbanding for all existing equipment manufactured by Rohde & Schwarz and keep all equipment in good working order.

B. SCOPE OF WORK

The Contractor shall perform repair and calibration services of the below government-owned equipment in accordance with the manufacturer-approved A2LA (ISO 17025) and ISO 9001 certified calibration standards with uncertainties and guardbanding:

1. Rohde & Schwarz SMU 200A Vector Signal Generator – Serial# 102546

a. Required Accredited Calibration Tests/Measurements

1) Reference Frequency

1. Output of Internal Reference

2) Frequency Setting

1. Setting Time

3) Spectral Purity

1. Harmonics

2. Subharmonics

3. Harmonics High Power

4. Nonharmonics

5. Wideband Noise

6. Single Side Band Phase Noise

4) Level

1. Level Uncertainty

2. Output Impedance (Voltage Standing Wave Ratio)

3. Setting Time

4. Distortion

5. Output Voltage

5) Amplitude Modulation

1. Uncertainties

2. Amplitude Modulation Frequency Response

3. Frequency Modulation Distortion

4. Frequency Modulation Frequency Response

6) Phase Modulation

1. Setting Uncertainty

2. Distortion

3. Frequency Response

7) I/Q Modulation (External Wideband I/Q)

1. Input Impedance (Voltage Standing Wave Ratio I/Q-Inputs)

2. Residual Carrier and Leakage

8) Internal Baseband I/Q

1. Radio Frequency Response for Entire Instrument

2. Suppression of Image Sideband for Entire Instrument

3. Aliasing Filter

4. Direct Current Offset

5. Spectral Purity (Spur Free Dynamic Range)

b. Required Non-Accredited Calibration Tests/Measurements

1) Internal Modulation Generator

a) Frequency Setting

b) Frequency Response

c) Amplitude Modulation Distortion

d) Incidental Phase Modulation with Amplitude Modulation

2) Frequency Modulation

a) Setting Uncertainty

b) Synchronous Amplitude Modulation with Frequency Modulation

c) Carrier Frequency Offset with Frequency Modulation

3) Pulse Modulation

a) ON/OFF Ratio

b) Video Crosstalk

4) I/Q Modulation

a) Error Vector

5) Differential IQ Outputs

c. Additional Measurements as Deemed Required by Manufacturer

1) Options B9, B13, B14, B15, B16, B17, B18, B31, B36, B90, B106, B203, K44, K55, K62, K65, K71, K72, and K74

2. Rohde & Schwarz SMU 200A Vector Signal Generator – Serial# 104203

a. Required Accredited Calibration Tests/Measurements

1) Reference Frequency

a) Output of Internal Reference

2) Frequency Setting

a) Setting Time

3) Spectral Purity

a) Harmonics

b) Subharmonics

c) Harmonics High Power

d) Nonharmonics

e) Wideband Noise

f) Single Side Band Phase Noise

4) Level

a) Level Uncertainty

b) Output Impedance (Voltage Standing Wave Ratio)

c) Setting Time

d) Distortion

e) Output Voltage

5) Amplitude Modulation

a) Uncertainties

b) Amplitude Modulation Frequency Response

c) Frequency Modulation Distortion

d) Frequency Modulation Frequency Response

6) Phase Modulation

a) Setting Uncertainty

b) Distortion

c) Frequency Response

7) I/Q Modulation (External Wideband I/Q)

a) Input Impedance (Voltage Standing Wave Ratio I/Q-Inputs)

b) Residual Carrier and Leakage

8) Internal Baseband I/Q

a) Radio Frequency Response for Entire Instrument

b) Suppression of Image Sideband for Entire Instrument

c) Aliasing Filter

d) Direct Current-Offset

e) Spectral Purity (Spur Free Dynamic Range)

b. Required Non-Accredited Calibration Tests/Measurements

1) Internal Modulation Generator

a) Frequency Setting

b) Frequency Response

c) Amplitude Modulation Distortion

d) Incidental Phase Modulation with Amplitude Modulation

2) Frequency Modulation

a) Frequency Modulation Setting Uncertainty

b) Synchronous Amplitude Modulation with Frequency Modulation

c) Carrier Frequency Offset with Frequency Modulation

3) Pulse Modulation

a) ON/OFF Ratio

b) Video Crosstalk

4) I/Q Modulation

a) Error Vector

5) Differential IQ Outputs

c. Additional Measurements as Deemed Required by Manufacturer

1) Options B9, B13, B14, B15, B16, B17, B18, B31, B36, B90, B106, B203, K44, K55, K62, K65, K71, K72, and K74

3. Rohde & Schwarz CMW 500 Radio Tester – Serial# 143300

a. Required Calibration Tests/Measurements

1) Reference Frequencies, REFOUT1

2) Frequency Accuracy, RF1COM

3) Voltage Standing Wave Ratio

4) TX Output level - ID, RF1COM

5) TX Output level - ID, RF2COM

6) TX Output level - ID, RF1OUT

7) TX Output level - Equi. Freq. Distr., RF1COM

8) TX Output level - Equi. Freq. Distr., RF2COM

9) TX Output level - Equi. Freq. Distr., RF1OUT

10) TX Output level - Equi. Freq. Distr. with H590D, TX1 sum, RF1COM

11) TX Output level - Equi. Freq. Distr. with H590D, TX1 sum, RF1OUT

12) TX Output level - Equi. Freq. Distr. with H590D,TX+RXadj, RF1COM

13) TX Output level - Equi. Freq. Distr. with H590D,TX+RXadj, RF2COM

14) TX Output level - RX-Adjustment, RF1COM

15) TX Output level - RX-Adjustment, RF2COM

16) TX Linearity, RF1COM

17) TX Linearity, RF2COM

18) TX Linearity, RF1OUT

19) TX Output linearity with fixed RF output attenuator setting, RF1COM

20) TX Harmonics

21) TX Harmonics Generator1 at SUM RF1COM, with H590D

22) TX Nonharmonics

23) TX Signal to Noise Ratio

24) TX Signal to Noise Ratio Generator 1 at SUM RF1COM, with H590D

25) TX Phase Noise – SSB

26) RX Level - ID, RF1COM

27) RX Level - ID, RF2COM

28) RX Level - Equi. Freq. Distr., RF1COM

29) RX Level - Equi. Freq. Distr., RF2COM

30) RX Linearity, RF1COM

31) RX Linearity, RF2COM

32) RX Level - TX-Adjustment, RF1COM

33) RX Level - TX-Adjustment, RF2COM

34) RX Level Linearity with fixed expected nominal power setting

35) RX Harmonics

36) RX Inherent Spurious Response

37) RX Spurious Response

38) RX - Dynamic Range

39) RX Phase Noise – Single Sideband

40) RX FFT spectrum analyzer

41) TX Modulation Quality - ARB-Gen GSM-GMSK, CMW-H110A

42) TX Modulation Quality - ARB-Gen GSM-8PSK, CMW-H110A

43) TX Modulation Quality - ARB-Gen, WCDMA, CMW-H110A

44) TX Modulation Quality - ARB-Gen WIMAX, CMW-H110A

45) Audio Generator, CMW-H400

46) Audio Analyzer, CMW-H400

47) TX WCDMA, CMW-KS400, A01200

48) RX LTE-FDD Demodulation Quality, CMW-KM500

49) TX LTE SIG FDD, CMW-KS500, A01200

50) TX LTE SIG FDD, CMW-KS500, 2.SUW, A01300

51) TX CDMA2000, CMW-KS800, A01000

52) TX 1xEV-DO , CMW-KS880, A01000

53) RF Path 2: Voltage Standing Wave Ratio

54) RF Path 2: TX Output level - ID, RF3COM

55) RF Path 2: TX Output level - ID, RF4COM

56) RF Path 2: TX Output level - ID, RF3OUT

57) RF Path 2: TX Output level - Equi. Freq. Distr., RF3COM

58) RF Path 2: TX Output level - Equi. Freq. Distr., RF4COM

59) RF Path 2: TX Output level - Equi. Freq. Distr., RF3OUT

60) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D, TX2 sum, RF3COM

61) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D, TX2 sum, RF3OUT

62) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF3COM

63) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF4COM

64) RF Path 2: TX Output level - RX-Adjustment, RF3COM

65) RF Path 2: TX Output level - RX-Adjustment, RF4COM

66) RF Path 2: TX Linearity, RF3COM

67) RF Path 2: TX Linearity, RF4COM

68) RF Path 2: TX Linearity, RF3OUT

69) RF Path 2: TX Output linearity with fixed RF output attenuator setting, RF3COM

70) RF Path 2: TX Harmonics

71) RF Path 2: TX Harmonics Generator2 at SUM RF3COM, with H590D

72) RF Path 2: TX Nonharmonics

73) RF Path 2: TX Signal to Noise Ratio

74) RF Path 2: TX Signal to Noise Ratio Generator2 at SUM RF3COM, with

H590D

75) RF Path 2: TX Phase Noise - SSB

76) RF Path 2: RX Level - ID, RF3COM

77) RF Path 2: RX Level - ID, RF4COM

78) RF Path 2: RX Level - Equi. Freq. Distr., RF3COM

79) RF Path 2: RX Level - Equi. Freq. Distr., RF4COM

80) RF Path 2: RX Linearity, RF3COM

81) RF Path 2: RX Linearity, RF4COM

82) RF Path 2: RX Level - TX-Adjustment, RF3COM

83) RF Path 2: RX Level - TX-Adjustment, RF4COM

84) RF Path 2: RX Level Linearity with fixed expected nominal power setting

85) RF Path 2: RX Harmonics

86) RF Path 2: RX Inherent Spurious Response

87) RF Path 2: RX Spurious Response

88) RF Path 2: RX - Dynamic Range

89) RF Path 2: RX Phase Noise - SSB

90) RF Path 2: RX FFT spectrum analyzer

91) RF Path 2: TX Modulation Quality - ARB-Gen GSM-GMSK, CMW-H110A

92) RF Path 2: TX Modulation Quality - ARB-Gen GSM-8PSK, CMW-H110A

93) RF Path 2: TX Modulation Quality - ARB-Gen, WCDMA, CMW-H110A

94) RF Path 2: TX Modulation Quality - ARB-Gen WIMAX, CMW-H110A

95) RF Path 3: TX Output level - ID, RF1COM

96) RF Path 3: TX Output level - ID, RF2COM

97) RF Path 3: TX Output level - ID, RF1OUT

98) RF Path 3: TX Output level - Equi. Freq. Distr., RF1COM

99) RF Path 3: TX Output level - Equi. Freq. Distr., RF2COM

100) RF Path 3: TX Output level - Equi. Freq. Distr., RF1OUT

101) RF Path 3: TX Output level - Equi. Freq. Distr., with H590D, TX3 sum, RF2COM

102) RF Path 3: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF1COM

103) RF Path 3: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF2COM

104) RF Path 3: TX Output level - RX-Adjustment, RF1COM

105) RF Path 3: TX Output level - RX-Adjustment, RF2COM

106) RF Path 3: TX Linearity, RF1COM

107) RF Path 3: TX Linearity, RF2COM

108) RF Path 3: TX Linearity, RF1OUT

109) RF Path 3: TX Output linearity with fixed RF output attenuator setting, RF1COM

110) RF Path 3: TX Harmonics

111) RF Path 3: TX Harmonics Generator3 at SUM RF2COM, with H590D

112) RF Path 3: TX Nonharmonics

113) RF Path 3: TX Signal to Noise Ratio

114) RF Path 3: TX Signal to Noise Ratio Generator3 at SUM RF2COM, with

H590D

115) RF Path 3: TX Phase Noise - SSB

116) RF Path 3: RX Level - ID, RF1COM

117) RF Path 3: RX Level - ID, RF2COM

118) RF Path 3: RX Level - Equi. Freq. Distr., RF1COM

119) RF Path 3: RX Level - Equi. Freq. Distr., RF2COM

120) RF Path 3: RX Linearity, RF1COM

121) RF Path 3: RX Linearity, RF2COM

122) RF Path 3: RX Level - TX-Adjustment, RF1COM

123) RF Path 3: RX Level - TX-Adjustment, RF2COM

124) RF Path 3: RX Level Linearity with fixed expected nominal power setting

125) RF Path 3: RX Harmonics

126) RF Path 3: RX Inherent Spurious Response

127) RF Path 3: RX Spurious Response

128) RF Path 3: RX - Dynamic Range

129) RF Path 3: RX Phase Noise - SSB

130) RF Path 3: RX FFT spectrum analyzer

131) RF Path 3: TX Modulation Quality - ARB-Gen GSM-GMSK, CMW-H110A

132) RF Path 3: TX Modulation Quality - ARB-Gen GSM-8PSK, CMW-H110A

133) RF Path 3: TX Modulation Quality - ARB-Gen, WCDMA, CMW-H110A

134) RF Path 3: TX Modulation Quality - ARB-Gen WIMAX, CMW-H110A

135) RF Path 4: TX Output level - ID, RF3COM

136) RF Path 4: TX Output level - ID, RF4COM

137) RF Path 4: TX Output level - ID, RF3OUT

138) RF Path 4: TX Output level - Equi. Freq. Distr., RF3COM

139) RF Path 4: TX Output level - Equi. Freq. Distr., RF4COM

140) RF Path 4: TX Output level - Equi. Freq. Distr., RF3OUT

141) RF Path 4: TX Output level - Equi. Freq. Distr., with H590D, TX4 sum, RF4COM

142) RF Path 4: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF3COM

143) RF Path 4: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF4COM

144) RF Path 4: TX Output level - RX-Adjustment, RF3COM

145) RF Path 4: TX Output level - RX-Adjustment, RF4COM

146) RF Path 4: TX Linearity, RF3COM

147) RF Path 4: TX Linearity, RF4COM

148) RF Path 4: TX Linearity, RF3OUT

149) RF Path 4: TX Output linearity with fixed RF output attenuator setting, RF3COM

150) RF Path 4: TX Harmonics

151) RF Path 4: TX Harmonics Generator4 at SUM RF4COM, with H590D

152) RF Path 4: TX Nonharmonics

153) RF Path 4: TX Signal to Noise Ratio

154) RF Path 4: TX Signal to Noise Ratio Generator 4 at SUM RF4COM, with

H590D

155) RF Path 4: TX Phase Noise - SSB

156) RF Path 4: RX Level - ID, RF3COM

157) RF Path 4: RX Level - ID, RF4COM

158) RF Path 4: RX Level - Equi. Freq. Distr., RF3COM

159) RF Path 4: RX Level - Equi. Freq. Distr., RF4COM

160) RF Path 4: RX Linearity, RF3COM

161) RF Path 4: RX Linearity, RF4COM

162) RF Path 4: RX Level - TX-Adjustment, RF3COM

163) RF Path 4: RX Level - TX-Adjustment, RF4COM

164) RF Path 4: RX Level Linearity with fixed expected nominal power setting

165) RF Path 4: RX Harmonics

166) RF Path 4: RX Inherent Spurious Response

167) RF Path 4: RX Spurious Response

168) RF Path 4: RX - Dynamic Range

169) RF Path 4: RX Phase Noise - SSB

170) RF Path 4: RX FFT spectrum analyzer

171) RF Path 4: TX Modulation Quality - ARB-Gen GSM-GMSK, CMW-H110A

172) RF Path 4: TX Modulation Quality - ARB-Gen GSM-8PSK, CMW-H110A

173) RF Path 4: TX Modulation Quality - ARB-Gen, WCDMA, CMW-H110A

174) RF Path 4: TX Modulation Quality - ARB-Gen WIMAX, CMW-H110A

b. Additional Measurements as Deemed Required by Manufacturer for

1) H051H, H052S, H054B, H055M, H090A, H100A, H110A, H200A, H210A, H220A, H230A, H300B, H400B, H405A, H450D, H550M, H570B, H590D, H600B, H605A, H660A, H661A, H690B, KA100, KA150, KAA20, KAA21, KE100, KE500, KM050, KM051, KM500, KS400, KS401, KS410, KS411, KS500, KS502, KS510, KS520, KS521, KS800, KS810, KS880, KS888, KS890, KT020

4. Rohde & Schwarz CMW 500 Radio Tester – Serial# 160776

a. Required Calibration Tests/Measurements

1) Reference Frequencies, REFOUT1

2) Frequency Accuracy, RF1COM

3) VSWR

4) TX Output level - ID, RF1COM

5) TX Output level - ID, RF2COM

6) TX Output level - ID, RF1OUT

7) TX Output level - ID, RF1COM, CMW-KB036

8) TX Output level - ID, RF2COM, CMW-KB036

9) TX Output level - ID, RF1OUT, CMW-KB036

10) TX Output level - Equi. Freq. Distr., RF1COM

11) TX Output level - Equi. Freq. Distr., RF2COM

12) TX Output level - Equi. Freq. Distr., RF1OUT

13) TX Output level - Equi. Freq. Distr., RF1COM, CMW-KB036

14) TX Output level - Equi. Freq. Distr., RF2COM, CMW-KB036

15) TX Output level - Equi. Freq. Distr., RF1OUT, CMW-KB036

16) TX Output level - Equi. Freq. Distr. with H590D, TX1 sum, RF1COM

17) TX Output level - Equi. Freq. Distr. with H590D, TX1 sum, RF1OUT

18) TX Output level - Equi. Freq. Distr. with H590D, TX1 sum, RF1COM, CMW-

KB036

19) TX Output level - Equi. Freq. Distr. with H590D, TX1 sum, RF1OUT, CMW-

KB036

20) TX Output level - Equi. Freq. Distr. with H590D,TX+RXadj, RF1COM

21) TX Output level - Equi. Freq. Distr. with H590D,TX+RXadj, RF2COM

22) TX Output level - Equi. Freq. Distr. with H590D,TX+RXadj, RF1COM, CMW-

KB036

23) TX Output level - Equi. Freq. Distr. with H590D,TX+RXadj, RF2COM, CMW-

KB036

24) TX Output level - RX-Adjustment, RF1COM

25) TX Output level - RX-Adjustment, RF2COM

26) TX Output level - RX-Adjustment, RF1COM, CMW-KB036

27) TX Output level - RX-Adjustment, RF2COM, CMW-KB036

28) TX Linearity, RF1COM

29) TX Linearity, RF2COM

30) TX Linearity, RF1OUT

31) TX Linearity, RF1COM, CMW-KB036

32) TX Linearity, RF2COM, CMW-KB036

33) TX Linearity, RF1OUT, CMW-KB036

34) TX Output linearity with fixed RF output attenuator setting, RF1COM

35) TX Output linearity with fixed RF output attenuator setting, RF1COM, CMW-

KB036

36) TX Harmonics

37) TX Harmonics, CMW-KB036

38) TX Harmonics Generator1 at SUM RF1COM, with H590D

39) TX Harmonics Generator1 at SUM RF1COM, with H590D, Option KB036

40) TX Nonharmonics

41) TX Nonharmonics, CMW-KB036

42) TX Signal to Noise Ratio

43) TX Signal to Noise Ratio, CMW-KB036

44) TX Signal to Noise Ratio Generator 1 at SUM RF1COM, with H590D

45) TX Signal to Noise Ratio Generator 1 at SUM RF1COM, with H590D, CMW-

KB036

46) TX Phase Noise - SSB

47) TX Phase Noise - SSB, CMW-KB036

48) RX Level - ID, RF1COM

49) RX Level - ID, RF2COM

50) RX Level - ID, RF1COM , CMW-KB036

51) RX Level - ID, RF2COM, CMW-KB036

52) RX Level - Equi. Freq. Distr., RF1COM

53) RX Level - Equi. Freq. Distr., RF2COM

54) RX Level - Equi. Freq. Distr., RF1COM, CMW-KB036

55) RX Level - Equi. Freq. Distr., RF2COM, CMW-KB036

56) RX Linearity, RF1COM

57) RX Linearity, RF2COM

58) RX Linearity, RF1COM, CMW-KB036

59) RX Linearity, RF2COM, CMW-KB036

60) RX Level - TX-Adjustment, RF1COM

61) RX Level - TX-Adjustment, RF2COM

62) RX Level - TX-Adjustment, RF1COM, CMW-KB036

63) RX Level - TX-Adjustment, RF2COM, CMW-KB036

64) RX Level Linearity with fixed expected nominal power setting

65) RX Harmonics

66) RX Harmonics, CMW-KB036

67) RX Inherent Spurious Response

68) RX Inherent Spurious Responce, CMW-KB036

69) RX Spurious Response

70) RX Spurious Response, CMW-KB036

71) RX - Dynamic Range

72) RX - Dynamic Range, CMW-KB036

73) RX Phase Noise - SSB

74) RX Phase Noise - SSB, CMW-KB036

75) RX FFT spectrum analyzer

76) TX Modulation Quality - ARB-Gen GSM-GMSK

77) TX Modulation Quality - ARB-Gen GSM-8PSK

78) TX Modulation Quality - ARB-Gen, WCDMA

79) RX GSM Demodulation Quality, CMW-KM200

80) 108. TX GSM, CMW-KS200,SUU,A01000

81) RX GSM EDGE Evolution, CMW-KM201

82) Audio Generator, CMW-H400

83) Audio Analyzer, CMW-H400

84) RX WCDMA Power Meter, CMW-KM400

85) RX WCDMA Demodulation Quality, CMW-KM400

86) RX WCDMA ACLR, CMW-KM400

87) 115. TX WCDMA, CMW-KS400,2.SUW,A01200

88) RX LTE-FDD Demodulation Quality, CMW-KM500

89) RX LTE-FDD Demodulation Quality, CMW-KM500, CMW-KB036

90) TX LTE SIG FDD, CMW-KS500,2.SUW,A01200

91) TX LTE SIG FDD, CMW-KS500,2.SUW,A01200,CMW-KB036

92) TX LTE - WINIQSIM2, CMW-KW500

93) TX LTE - WINIQSIM2, CMW-KW500, CMW-KB036

94) RX LTE-TDD Demodulation Quality, CMW-KM550

95) RX LTE-TDD Demodulation Quality, CMW-KM550, CMW-KB036

96) RX WLAN- b,g Demodulation Quality, CMW-KM650

97) RX WLAN-a Demodulation Quality, CMW-KM650, CMW-KB036

98) TX WLAN SIG, CMW-KS650,SUU,A01000

99) TX WLAN SIG, CMW-KS650,SUU,A01000,CMW-KB036

100) RX WLAN-n Demodulation Quality, CMW-KM651

101) RX WLAN-n Demodulation Quality, CMW-KM651, CMW-KB036

102) TX WLAN SIG, CMW-KS651,SUU,A01000

103) TX WLAN SIG, CMW-KS651,SUU,A01000,CMW-KB036

104) RX CDMA2000 Demodulation Quality, CMW-KM800

105) RX CDMA2000 ACP, CMW-KM800

106) 134. TX CDMA2000, CMW-KS800,SUU,A01000

107) RF Path 2: VSWR *

108) RF Path 2: TX Output level - ID, RF3COM

109) RF Path 2: TX Output level - ID, RF4COM

110) RF Path 2: TX Output level - ID, RF3OUT

111) RF Path 2: TX Output level - ID, RF3COM, CMW-KB036

112) RF Path 2: TX Output level - ID, RF4COM, CMW-KB036

113) RF Path 2: TX Output level - ID, RF3OUT, CMW-KB036

114) RF Path 2: TX Output level - Equi. Freq. Distr., RF3COM

115) RF Path 2: TX Output level - Equi. Freq. Distr., RF4COM

116) RF Path 2: TX Output level - Equi. Freq. Distr., RF3OUT

117) RF Path 2: TX Output level - Equi. Freq. Distr., RF3COM, CMW-KB036

118) RF Path 2: TX Output level - Equi. Freq. Distr., RF4COM, CMW-KB036

119) RF Path 2: TX Output level - Equi. Freq. Distr., RF3OUT, CMW-KB036

120) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D, TX2 sum, RF3COM

121) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D, TX2 sum, RF3OUT

122) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D,TX2 sum, RF3COM,CMW-KB036

123) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D,TX2 sum, RF3OUT,CMW-KB036

124) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF3COM

125) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF4COM

126) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF3COM,CMW-KB036

127) RF Path 2: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF4COM,CMW-KB036

128) RF Path 2: TX Output level - RX-Adjustment, RF3COM

129) RF Path 2: TX Output level - RX-Adjustment, RF4COM

130) RF Path 2: TX Output level - RX-Adjustment, RF3COM, CMW-KB036

131) RF Path 2: TX Output level - RX-Adjustment, RF4COM, CMW-KB036

132) RF Path 2: TX Linearity, RF3COM

133) RF Path 2: TX Linearity, RF4COM

134) RF Path 2: TX Linearity, RF3OUT

135) RF Path 2: TX Linearity, RF3COM, CMW-KB036

136) RF Path 2: TX Linearity, RF4COM, CMW-KB036

137) RF Path 2: TX Linearity, RF3OUT, CMW-KB036

138) RF Path 2: TX Output linearity with fixed RF output attenuator setting, RF3COM

139) RF Path 2: TX Output linearity with fixed RF output attenuator setting, RF3COM, CMW-KB036

140) RF Path 2: TX Harmonics

141) RF Path 2: TX Harmonics, CMW-KB036

142) RF Path 2: TX Harmonics Generator2 at SUM RF3COM, with H590D

143) RF Path 2: TX Harmonics Generator2 at SUM RF3COM, with H590D, Option

KB036

144) RF Path 2: TX Nonharmonics

145) RF Path 2: TX Nonharmonics, CMW-KB036

146) RF Path 2: TX Signal to Noise Ratio

147) RF Path 2: TX Signal to Noise Ratio, CMW-KB036

148) RF Path 2: TX Signal to Noise Ratio Generator2 at SUM RF3COM, with H590D

149) RF Path 2: TX Signal to Noise Ratio Generator2 at SUM RF3COM, with

H590D, CMW-KB036

150) RF Path 2: TX Phase Noise - SSB

151) RF Path 2: TX Phase Noise - SSB, CMW-KB036

152) RF Path 2: RX Level - ID, RF3COM

153) RF Path 2: RX Level - ID, RF4COM

154) RF Path 2: RX Level - ID, RF3COM, CMW-KB036

155) RF Path 2: RX Level - ID, RF4COM, CMW-KB036

156) RF Path 2: RX Level - Equi. Freq. Distr., RF3COM

157) RF Path 2: RX Level - Equi. Freq. Distr., RF4COM

158) RF Path 2: RX Level - Equi. Freq. Distr., RF3COM, CMW-KB036

159) RF Path 2: RX Level - Equi. Freq. Distr., RF4COM, CMW-KB036

160) RF Path 2: RX Linearity, RF3COM

161) RF Path 2: RX Linearity, RF4COM

162) RF Path 2: RX Linearity, RF3COM, CMW-KB036

163) RF Path 2: RX Linearity, RF4COM, CMW-KB036

164) RF Path 2: RX Level - TX-Adjustment, RF3COM

165) RF Path 2: RX Level - TX-Adjustment, RF4COM

166) RF Path 2: RX Level - TX-Adjustment, RF3COM, CMW-KB036

167) RF Path 2: RX Level - TX-Adjustment, RF4COM, CMW-KB036

168) RF Path 2: RX Level Linearity with fixed expected nominal power setting

169) RF Path 2: RX Harmonics

170) RF Path 2: RX Harmonics, CMW-KB036

171) RF Path 2: RX Inherent Spurious Response

172) RF Path 2: RX Inherent Spurious Responce, CMW-KB036

173) RF Path 2: RX Spurious Response

174) RF Path 2: RX Spurious Response, CMW-KB036

175) RF Path 2: RX - Dynamic Range

176) RF Path 2: RX - Dynamic Range, CMW-KB036

177) RF Path 2: RX Phase Noise - SSB

178) RF Path 2: RX Phase Noise - SSB, CMW-KB036

179) RF Path 2: RX FFT spectrum analyzer

180) RF Path 2: TX Modulation Quality - ARB-Gen GSM-GMSK

181) RF Path 2: TX Modulation Quality - ARB-Gen GSM-8PSK

182) RF Path 2: TX Modulation Quality - ARB-Gen, WCDMA

183) RF Path 3: TX Output level - ID, RF1COM

184) RF Path 3: TX Output level - ID, RF2COM

185) RF Path 3: TX Output level - ID, RF1OUT

186) RF Path 3: TX Output level - ID, RF1COM, CMW-KB036

187) RF Path 3: TX Output level - ID, RF2COM, CMW-KB036

188) RF Path 3: TX Output level - ID, RF1OUT, CMW-KB036

189) RF Path 3: TX Output level - Equi. Freq. Distr., RF1COM

190) RF Path 3: TX Output level - Equi. Freq. Distr., RF2COM

191) RF Path 3: TX Output level - Equi. Freq. Distr., RF1OUT

192) RF Path 3: TX Output level - Equi. Freq. Distr., RF1COM, CMW-KB036

193) RF Path 3: TX Output level - Equi. Freq. Distr., RF2COM, CMW-KB036

194) RF Path 3: TX Output level - Equi. Freq. Distr., RF1OUT, CMW-KB036

195) RF Path 3: TX Output level - Equi. Freq. Distr., with H590D, TX3 sum, RF2COM

196) RF Path 3: TX Output level - Equi. Freq. Distr., with H590D,TX3 sum, RF2COM,CMW-KB036

197) RF Path 3: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF1COM

198) RF Path 3: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF2COM

199) RF Path 3: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF1COM,CMW-KB036

200) RF Path 3: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF2COM,CMW-KB036

201) RF Path 3: TX Output level - RX-Adjustment, RF1COM

202) RF Path 3: TX Output level - RX-Adjustment, RF2COM

203) RF Path 3: TX Output level - RX-Adjustment, RF1COM, CMW-KB036

204) RF Path 3: TX Output level - RX-Adjustment, RF2COM, CMW-KB036

205) RF Path 3: TX Linearity, RF1COM

206) RF Path 3: TX Linearity, RF2COM

207) RF Path 3: TX Linearity, RF1OUT

208) RF Path 3: TX Linearity, RF1COM, CMW-KB036

209) RF Path 3: TX Linearity, RF2COM, CMW-KB036

210) RF Path 3: TX Linearity, RF1OUT, CMW-KB036

211) RF Path 3: TX Output linearity with fixed RF output attenuator setting, RF1COM

212) RF Path 3: TX Output linearity with fixed RF output attenuator setting, RF1COM, CMW-KB036

213) RF Path 3: TX Harmonics

214) RF Path 3: TX Harmonics, CMW-KB036

215) RF Path 3: TX Harmonics Generator3 at SUM RF2COM, with H590D

216) RF Path 3: TX Harmonics Generator3 at SUM RF2COM, with H590D, Option

KB036

217) RF Path 3: TX Nonharmonics

218) RF Path 3: TX Nonharmonics, CMW-KB036

219) RF Path 3: TX Signal to Noise Ratio

220) RF Path 3: TX Signal to Noise Ratio, CMW-KB036

221) RF Path 3: TX Signal to Noise Ratio Generator3 at SUM RF2COM, with H590D

222) RF Path 3: TX Signal to Noise Ratio Generator3 at SUM RF2COM, with

H590D, CMW-KB036

223) RF Path 3: TX Phase Noise - SSB

224) RF Path 3: TX Phase Noise - SSB, CMW-KB036

225) RF Path 3: RX Level - ID, RF1COM

226) RF Path 3: RX Level - ID, RF2COM

227) RF Path 3: RX Level - ID, RF1COM, CMW-KB036

228) RF Path 3: RX Level - ID, RF2COM, CMW-KB036

229) RF Path 3: RX Level - Equi. Freq. Distr., RF1COM

230) RF Path 3: RX Level - Equi. Freq. Distr., RF2COM

231) RF Path 3: RX Level - Equi. Freq. Distr., RF1COM, CMW-KB036

232) RF Path 3: RX Level - Equi. Freq. Distr., RF2COM, CMW-KB036

233) RF Path 3: RX Linearity, RF1COM

234) RF Path 3: RX Linearity, RF2COM

235) RF Path 3: RX Linearity, RF1COM, CMW-KB036

236) RF Path 3: RX Linearity, RF2COM, CMW-KB036

237) RF Path 3: RX Level - TX-Adjustment, RF1COM

238) RF Path 3: RX Level - TX-Adjustment, RF2COM

239) RF Path 3: RX Level - TX-Adjustment, RF1COM, CMW-KB036

240) RF Path 3: RX Level - TX-Adjustment, RF2COM, CMW-KB036

241) RF Path 3: RX Level Linearity with fixed expected nominal power setting

242) RF Path 3: RX Harmonics

243) RF Path 3: RX Harmonics, CMW-KB036

244) RF Path 3: RX Inherent Spurious Response

245) RF Path 3: RX Inherent Spurious Responce, CMW-KB036

246) RF Path 3: RX Spurious Response

247) RF Path 3: RX Spurious Response, CMW-KB036

248) RF Path 3: RX - Dynamic Range

249) RF Path 3: RX - Dynamic Range, CMW-KB036

250) RF Path 3: RX Phase Noise - SSB

251) RF Path 3: RX Phase Noise - SSB, CMW-KB036

252) RF Path 3: RX FFT spectrum analyzer

253) RF Path 3: TX Modulation Quality - ARB-Gen GSM-GMSK

254) RF Path 3: TX Modulation Quality - ARB-Gen GSM-8PSK

255) RF Path 3: TX Modulation Quality - ARB-Gen, WCDMA

256) RF Path 4: TX Output level - ID, RF3COM

257) RF Path 4: TX Output level - ID, RF4COM

258) RF Path 4: TX Output level - ID, RF3OUT

259) RF Path 4: TX Output level - ID, RF3COM, CMW-KB036

260) RF Path 4: TX Output level - ID, RF4COM, CMW-KB036

261) RF Path 4: TX Output level - ID, RF3OUT, CMW-KB036

262) RF Path 4: TX Output level - Equi. Freq. Distr., RF3COM

263) RF Path 4: TX Output level - Equi. Freq. Distr., RF4COM

264) RF Path 4: TX Output level - Equi. Freq. Distr., RF3OUT

265) RF Path 4: TX Output level - Equi. Freq. Distr., RF3COM, CMW-KB036

266) RF Path 4: TX Output level - Equi. Freq. Distr., RF4COM, CMW-KB036

267) RF Path 4: TX Output level - Equi. Freq. Distr., RF3OUT, CMW-KB036

268) RF Path 4: TX Output level - Equi. Freq. Distr., with H590D, TX4 sum, RF4COM

269) RF Path 4: TX Output level - Equi. Freq. Distr., with H590D,TX4 sum, RF4COM,CMW-KB036

270) RF Path 4: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF3COM

271) RF Path 4: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF4COM

272) RF Path 4: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF3COM,CMW-KB036

273) RF Path 4: TX Output level - Equi. Freq. Distr., with H590D,TX+RXadj, RF4COM,CMW-KB036

274) RF Path 4: TX Output level - RX-Adjustment, RF3COM

275) RF Path 4: TX Output level - RX-Adjustment, RF4COM

276) RF Path 4: TX Output level - RX-Adjustment, RF3COM, CMW-KB036

277) RF Path 4: TX Output level - RX-Adjustment, RF4COM, CMW-KB036

278) RF Path 4: TX Linearity, RF3COM

279) RF Path 4: TX Linearity, RF4COM

280) RF Path 4: TX Linearity, RF3OUT

281) RF Path 4: TX Linearity, RF3COM, CMW-KB036

282) RF Path 4: TX Linearity, RF4COM, CMW-KB036

283) RF Path 4: TX Linearity, RF3OUT, CMW-KB036

284) RF Path 4: TX Output linearity with fixed RF output attenuator setting, RF3COM

285) RF Path 4: TX Output linearity with fixed RF output attenuator setting, RF3COM, CMW-KB036

286) RF Path 4: TX Harmonics

287) RF Path 4: TX Harmonics, CMW-KB036

288) RF Path 4: TX Harmonics Generator4 at SUM RF4COM, with H590D

289) RF Path 4: TX Harmonics Generator4 at SUM RF4COM, with H590D, Option

KB036

290) RF Path 4: TX Nonharmonics

291) RF Path 4: TX Nonharmonics, CMW-KB036

292) RF Path 4: TX Signal to Noise Ratio

293) RF Path 4: TX Signal to Noise Ratio, CMW-KB036

294) RF Path 4: TX Signal to Noise Ratio Generator 4 at SUM RF4COM, with

H590D

295) RF Path 4: TX Signal to Noise Ratio Generator 4 at SUM RF4COM, with

H590D, CMW-KB036

296) RF Path 4: TX Phase Noise - SSB

297) RF Path 4: TX Phase Noise - SSB, CMW-KB036

298) RF Path 4: RX Level - ID, RF3COM

299) RF Path 4: RX Level - ID, RF4COM

300) RF Path 4: RX Level - ID, RF3COM, CMW-KB036

301) RF Path 4: RX Level - ID, RF4COM, CMW-KB036

302) RF Path 4: RX Level - Equi. Freq. Distr., RF3COM

303) RF Path 4: RX Level - Equi. Freq. Distr., RF4COM

304) RF Path 4: RX Level - Equi. Freq. Distr., RF3COM, CMW-KB036

305) RF Path 4: RX Level - Equi. Freq. Distr., RF4COM, CMW-KB036

306) RF Path 4: RX Linearity, RF3COM

307) RF Path 4: RX Linearity, RF4COM

308) RF Path 4: RX Linearity, RF3COM, CMW-KB036

309) RF Path 4: RX Linearity, RF4COM, CMW-KB036

310) RF Path 4: RX Level - TX-Adjustment, RF3COM

311) RF Path 4: RX Level - TX-Adjustment, RF4COM

312) RF Path 4: RX Level - TX-Adjustment, RF3COM, CMW-KB036

313) RF Path 4: RX Level - TX-Adjustment, RF4COM, CMW-KB036

314) RF Path 4: RX Level Linearity with fixed expected nominal power setting

315) RF Path 4: RX Harmonics

316) RF Path 4: RX Harmonics, CMW-KB036

317) RF Path 4: RX Inherent Spurious Response

318) RF Path 4: RX Inherent Spurious Responce, CMW-KB036

319) RF Path 4: RX Spurious Response

320) RF Path 4: RX Spurious Response, CMW-KB036

321) RF Path 4: RX - Dynamic Range

322) RF Path 4: RX - Dynamic Range, CMW-KB036

323) RF Path 4: RX Phase Noise - SSB

324) RF Path 4: RX Phase Noise - SSB, CMW-KB036

325) RF Path 4: RX FFT spectrum analyzer

326) RF Path 4: TX Modulation Quality - ARB-Gen GSM-GMSK

327) RF Path 4: TX Modulation Quality - ARB-Gen GSM-8PSK

328) RF Path 4: TX Modulation Quality - ARB-Gen, WCDMA

b. Additional Measurements as Deemed Required by Manufacturer for

KAA10, KAA21, KAA30, KS170, KS504, KS514, KS525, KS660, KW500

4. Rohde & Schwarz FSH8 Handheld Spectrum Analyzer – Serial# 106705

a. Required Accredited Calibration Tests/Measurements

1) Read Instrument Data

2) Read Temperature

3) Verify Reference Oscillator

4) Absolute Accuracy at 100 MHz

5) Frequency Response

6) Attenuator Accuracy

7) Display Linearity

8) Phase Noise

9) Noise Floor

10) Tracking Generator

11) Read Temperature

b. Additional Measurements as Deemed Required by Manufacturer for

1) Options K14, K40, K41, K42, K45, K50, K50e

5. Rohde & Schwarz FSH8 Handheld Spectrum Analyzer – Serial# 106706

a. Required Accredited Calibration Tests/Measurements

1) Read Instrument Data

2) Read Temperature

3) Verify Reference Oscillator

4) Absolute Accuracy at 100 MHz

5) Frequency Response

6) Attenuator Accuracy

7) Display Linearity

8) Phase Noise

9) Noise Floor

10) Tracking Generator

11) Read Temperature

b. Additional Measurements as Deemed Required by Manufacturer for

1) Options K14, K40, K41, K42, K45, K50, K50e

6. Rohde & Schwarz NRP-Z81 Wideband Power Sensor – Serial# 104380

a. Required Calibration Tests/Measurements

1) Absolute Accuracy of Sensor

2) Linearity of Sensor

3) Reflection Coefficient of Sensor

7. Rohde & Schwarz NRP-Z81 Wideband Power Sensor – Serial# 104379

a. Required Calibration Tests/Measurements

1) Absolute Accuracy of Sensor

2) Linearity of Sensor

3) Reflection Coefficient of Sensor

C. ACCEPTANCE/INSPECTION

The Contractor shall provide certification of calibration with measurement results with return delivery of equipment. NIST personnel will conduct a successful inspection of the equipment, the certification, and the measurement results prior to acceptance.

D. PERIOD OF PERFORMANCE

The Contractor shall complete the calibration service within one week of receipt of equipment.

NIST will schedule the service dates with the contractor within 30 days of contract award.

E. PLACE OF PERFORMANCE

All work shall be completed at the Contractor’s facility. Contractor shall provide packaging materials and shipping labels for movement of equipment from government site (Building #3, Department of Commerce Campus, Boulder, CO) to contractor facility.

The Contractor shall provide return shipping service at the completion of repair/calibration.

F. DELIVERABLES

Description Quantity Due Date Certificate of Calibration 1 per piece of equipment Completion of service Measurement Results 1 per piece of equipment Completion of service

G. WARRANTY

The Contractor shall warrant the calibration for one (1) year from completion of service.

File details come from the government source that posted it. Updated .