SOW Rollover Repair.pdf
PDF 92 KB Posted
- Attached to
- Rollover Repair for a Kenworth T370 Dump Truck
- Solicitation number
- FA500425Q0051
About this file
This Statement of Work (SOW) details a non-personnel service contract for repairing a 2019 Kenworth T370 Dump Truck (Serial No. 1NKHLZ9X1KR233199) that has experienced a rollover accident. The repair services include replacing the full cab, fenders, and damaged chassis parts, replacing the top of the dump bed, and ensuring all driver-activated function switches operate as originally intended. The contractor is responsible for providing all necessary parts, validating dump bed functions, checking fluid levels, and coordinating vehicle drop-off and pick-up locations with the government.
The extensive parts list includes multiple components such as doors, fenders, support quarters, bolts, washers, hub caps, trim pieces, reinforcement brackets, cables, and an aero deflector. The contractor must bear all parts and freight costs and will be required to correct any deficiencies identified during the Base Maintenance NCO's quality assurance inspection. The contract is dated 15 May 2025 and specifies that the contractor must communicate and coordinate closely with the government throughout the repair process.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - FA500425Q0051.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
17D00513 ACCIDENT ROLLOVER REPAIR
STATEMENT OF WORK (SOW)
15 May 2025
1. GENERAL SCOPE: This is a non-personnel service contract to replace the cab, damaged interior components and straighten the dump bed on a 2019 Kenworth T370 Dump Truck with serial No. 1NKHLZ9X1KR233199. The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision and all non-personal services necessary to perform the requirement as defined in this SOW. The contractor shall also perform to the standards within the contract.
1.2 OBJECTIVES: The contractor at minimum shall repair the vehicle by providing the below services. The contractor is also required to furnish and provide all necessary parts for the service.
1.2.1 SERVICES:
Replace full cab, fenders and other damaged chassis parts Replace top of dump bed Ensure all driver activated function switches operate in the same manner as the OEM intended Validate proper dump bed functions after repairs Ensure all fluid levels are within proper operating range after repairs
1.2.2 PARTS:
Qty Unit of Issue Part No. Description
1 EA R25-1251410711620R DOOR
1 EA R25-125110031252 DOOR A
1 EA N35-1038 FENDER QUARTER
1 EA N35-1038R FENDER QUARTER
1 EA N85-1206 SUPPORT QUARTER
1 EA N85-1206R SUPPORT QUARTER
4 EA HWC12452 BOLT-HEX M8-1.2
2 EA K363-338-3-312 WASHER
2 EA HWC12713 NUT-HEX SL NYL
6 EA HWC10050 BOLT-HEX M10-1
6 EA HWC07874 WASHER ROUND 7
1 EA 303-4009 HUB CAP
1 EA S60-1288-121510 PAD ASSEMBLY
1 EA S60-1381-2500 TRIM-DOOR
1 EA L29-1100-301 HOOD ASSEMBLY
2 EA W01-10-01P57L020B SCREW
1 EA S77-1043-100 REINFORCEMENT
1 EA S11-1469 BRACKET ASSY CU
1 EA S11-1467 BRACKET-CUPHOLD
1 EA R77-1246 REINFORCEMENT-F
1 EA R77-1183 REINFORCEMENT-S
1 EA R70-1020-700R CHANNEL-CO
1 EA R70-1019-700 COWL-CHANNEL
1 EA R64-1150-1000 PANEL-COWL
1 EA R64-1149-1000R PANEL-COW
1 EA R46-1015 SHIELD-WIRING
1 EA R22-1344 PLATE-COVER FIR
1 EA R11-1173 COVER-FIREWALLPOA
1 EA R11-2133 BRACKET-WATEPOA
1 EA R11-1766-001 BRACKET-SUR
1 EA R11-1765 BRACKET-SURGE T
1 EA R11-1387 BRACKET-MOUNTING
1 EA R01-1030 ADAPTER-TOEBAR
1 EA R01-1003 ADAPTER-TOEBAR
1 EA K320-55 BRACKET HORN EL
2 EA K275-7084 BRACKET-COWL
1 EA K221-5019 SPACER-RECTANG
1 EA K197-4097 REINFORCEMENT
1 EA K183-67-124 PLUG-BUTTON
1 EA K176-8655-1900 PANEL-FIR
1 EA K175-469-84 PANEL-TOEBOARD
5 EA 75000329-5 MOULDING-ED
1 EA K134-362 GASKET-REINFORCEMENT
2 EA K078-236 ANGLE-CA
1 EA K075-506 REINFORCEMENT-F
4 EA K041-802-25CA BOLT-HEX M
42 EA HWC02236 PIN-HUCKBOLT MG
81 EA HWU12370 PIN-HUCKBOLT MG
8 EA HWC12538 BOLT-HEX SL NYL
12 EA HWC04456 BOLT-HEX SL NYL
4 EA HWC12726 NUT-HEX SL NYL
37 EA HWC02116 COLLAR-HUCK 3/1
73 EA HWC02114 COLLAR-HUCK 1/4
3 EA HWC02106 COLLAR HUCK
30 EA HWC03152 WASHER-ROUND
4 EA HWC05826 WASHER-SEAL-SUN
5 EA HWU12370 PIN-HUCKBOLT MG
5 EA HWC12538 BOLT-HEX SL NYL
1 EA HWC12726 BOLT-HEX SL NYL
5 EA HWC02114 COLLAR-HUCK 1/4
1 EA R06-1004-61000E0 PAN-FLO
1 EA R64-1516-10001R PANEL-CA
1 EA R64-1516-10001 PANEL-CAB
1 EA R64-1099-4 PANEL-CAB REAR
1 EA R19-1018 PILLAR-CAB REAR
1 EA R77-1226 REINFORCEMENT-C
1 EA R47-1002R TRIM-GUSSET UP
1 EA K350-1559 PLATE-SEAT BELT
1 EA K19-4859R REINFORCEMENT
1 EA K197-4582 REINFORCEMENT
2 EA 1604-0615 RIVET-POP COUNT
1 EA R77-1226 REINFORCEMENT-C
1 EA R47-1002 TRIM-GUSSET UPPER
1 EA K350-1559 PLATE-SEAT BELT
1 EA K197-4859 REINFORCEMENT
1 EA K197-4582 REINFORCEMENT
2 EA 1604-0615 RIVOT-POP COUNT
1 EA R77-1227 REINFORCEMENT-C
1 EA R39-1081 SILL-CAB ROOF R
2 EA R19-1017 PILLAR-CAB REAR
8 EA HWU12370 PIN-HUCKBOLT MG
8 EA HWC02114 COLLAR-HUCK 1/4
65 EA HWC02236 PIN-HUCKBOLT MG
65 EA HWC02116 COLLAR-HUCK 3/1
10 EA W20-6011-08TDY0Z NUT-HEX LOCK M8X1.25ZN
15 EA HWC12713 NUT HEX SL NYL
4 EA HWC05150 SCREW-MACH PAN
1 EA R11-1407 BRACKET-RETAINER
2 EA R11-1419 BRACKET-POST CO
47 EA HWC02103 COLLAR-HUCK
47 EA HWC02217 PIN-HUCKBOLT MG
4 EA HWC12440 NUT-HEX SL NYL
2 EA D8400-9015 SCREW-MACH PP
1 EA HWC09101 SCREW TAPING T
4 EA HWC03112 WASHER-ROUND
2 EA HWC02106 COLLAR HUCK
2 EA K207-1097 SEAL-DOOR LATCH
8 EA W01-10-02P57L020N SCREW
6 EA HWC02716 PIN HUCKBOLT MG
1 EA HWC04084 SCREW-CAP FLTCS
1 EA S11-1551 BRACKET-HEADINER
1 EA K299-786 CLIP-SPRING DEF
1 EA R11-1909 BRACKET-HEADLINER
2 EA HWC09016 SCREW-MACH PAN
2 EA S20-1017 RETAINER-LINING
4 EA HWC03138 WASHER-ROUND #1
12 EA W34-1113-035LZNW BOLT-PA
1 EA K062-685 BRACKER-DEFROST
26 EA HWC03228 WASHER-STATOSEA
4 EA D8400-9015 SCREW-MACH PP
10 EA HWC02171 FASTENER-MAGNAL
10 EA HWC03126 WASHER-ROUND
1 EA R11-1908R BRACKET-SUNVISOR
1 EA R11-1908 BRACKET-SUNVISOR
2 EA K197-5663 REINFORCEMENT
2 EA K274-138 PLATE-WEAR DOOR
2 EA R83-1006 STOP-DOOR CHECK
36 EA HWC02114 COLLAR-HUCK 1/4
154 EA HWC02116 COLLAR-HUCK 3/1
12 EA HWC09069 SCREW-TAPPING T
12 EA 12X075PHDTPHS4PA SCREW-P
1 EA R77-1245R REINFORCEMENT
1 EA R77-1245 REINFORCEMENT-T
1 EA R25-1280-200R APERTURE-D
1 EA R25-1280-200 APERATURE-DO
1 EA K046-1767R BRACE-CAB CORNER
1 EA K046-1767 BRACE-CAB CORNER
2 EA K221-4564 SPACER-MIRROR
7 EA HWC12452 BOLT-HEX M8-1.2
12 EA HWC04238 BOLT-HEX SL NYL
36 EA HWU12370 PIN-HUCKBOLT MG
150 EA HWC02236 PIN-HUCKBOLT MG
1 EA D92-6102-100000 HARNESS
1 EA N92-6007-1AMSSE020 CABLE
1 EA N92-6007-4AABS0210 CABLE
1 EA N92-6006-4AJSN0210 CABLE
1 EA 0311-000566 AERO DEFLECTOR
1 EA KR233199 FULL CAB SHIELD
1.3 PLACE OF PERFORMANCE: The contractor is responsible for locating and communicating to the government the location in which the services will be executed.
1.4 CONTRACTOR’S RESPONSIBILITIES: The contractor at minimum is responsible for:
Coordinating with the government a location for dropping off the vehicle for repairs
All cost for parts and freight
Coordinating with the government a location for picking up the vehicle after repairs.
Correcting any deficiencies that does not meet the quality assurance inspection from the Base Maintenance NCO for work that was within the scope of the SOW
File details come from the government source that posted it. Updated .