SOW Roll up door.pdf

DEPARTMENT OF HOMELAND SECURITY

UNITED STATES COAST GUARD

U.S. Coast Guard MAT Pascagoula

104 USS Vicksburg Way Pascagoula, MS 39595

STATEMENT OF WORK FOR THE

REPLACEMENT OF ROLL UP DOORS

AUG 2026

GENERAL REQUIREMENTS

PART 1 GENERAL

1. INTENT: The intent of this project is to remove, dispose of, and replace one (1) roll up doors and associated components on Building 100 and ensure proper operation.

2. SCOPE OF WORK: Contractor shall furnish all labor, tools, materials, transportation, equipment, supervision, and personnel to remove existing, dispose of, and replace one roll-up door located at U.S. Coast Guard Maintenance Augmentation Team (MAT), Building 100, Pascagoula, MS. No repairs outside of the Statement of Work criteria are authorized without permission from the contracting officer or their representative.

3. QUALIFICATIONS: Contractor shall provide personnel who have the knowledge, qualifications, and working experience to perform the functions outlined in the Performance Requirements. All personnel shall have at a minimum an understanding of operation, maintenance procedures, and regulatory requirements associated with roll-up doors.

4. CONTINUITY OF FACILITIES OPERATION: Schedule work to minimize interference with the facilities normal operations. Perform all on-site work between the hours of 8:00 AM and 4:00 PM, Monday through Friday (federal holidays excluded), unless otherwise approved by the Contracting Officer or Contracting officer’s representative.

5. GOVERNMENT FURNISHED MATERIALS: None

PART 2 PERFORMANCE STANDARDS

1. PERFORMANCE REQUIREMENTS: Contractor shall provide services to remove, dispose of, and replace one steel, 12’ x 12’, roll up door at USCG MAT Pascagoula, MS, as identified below. All replacements shall be in kind with current door and shall comply with manufacture’s specifications. All maintenance will be completed IAW the Manufactures requirements.

1) Removal:

a. Remove one 12’ x 12’ roll up steel curtains and all associated equipment.

b. Dispose of all equipment off-site.

2) Replacement: Provide and Install:

a. One (1) 12’ x 12’ steel, non-insulated, wind loaded, Primed White rolling service door curtains with operator. Replacement will meet all specifications of current door.

b. All other associated hardware necessary for proper, long term, industrial operation.

3) Testing:

a. Full operational test will be performed in the presence of U.S. Coast

Guard representative prior to final acceptance of work.

2. SITE VISIT: All site visits should be scheduled with the Contracting Officer, Facilities Engineer and/or their representative and are highly encouraged. All personnel coming on site require a TWIC, military or REAL ID.

3. PERFORMANCE STANDARDS. Proper adherence to all safety procedures is required prior, during and after work being performed. The contractor shall furnish all personnel with and require donning of required personal protective equipment (PPE). The contractor shall safeguard the public and Government personnel, property, materials, supplies, and equipment exposed to contractor operations and activities, and avoid interruptions of Government operations in the performance of services.

4. POINT OF CONTACT:

Mike Ackiss Carlton.M.Ackiss@uscg.mil

5. LIABILITY OF DAMAGES. The contractor shall be liable for all damages to

Government equipment and property when such damage is due to fault or negligence of the contractor. The contractor shall be responsible for all damages or injury to persons that occur as a result of the contractor’s fault or negligence. The contractor shall take proper safety and health precautions to protect the work the workers, the public, and the property of others.

END OF SECTION