SOW_Pile_Appendix2.docx
DOCX document 18 KB Posted
- Attached to
- EAGLE RIDGE II Federal contract opportunity
- Solicitation number
- 140L6221Q0036
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140L6221Q0036.pdf | ||
| Statement_of_Work_EagleRidgeII.docx | DOCX document | |
| BatesHoleJuniper_EagleRidgeII_4_8_21topo.pdf | ||
| BatesHoleJuniper_EagleRidgeII_4_8_21.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Appendix 2
Bates Juniper
Eagle Ridge II
SPECIFICATIONS FOR PILING
Minimum Distance: Locate piles centrally and as far as possible from all leave trees, with the minimum distance from the edge of the pile to the perpendicular edge of the nearest branch or tree of approximately fifteen (15) feet. All piles will be located within the unit boundary.
Pile Height: Maximum pile height is six (6) feet.
Pile Diameter: Maximum pile diameter is six (6) feet.
Pile Shape: Pile shape can be “teepee”, triangular, mounded, or decked. If using a non-“teepee” method, stack fine materials (one inch in diameter or less) in the lower center with bigger material on top. Making sure there are no large air pockets.
Material Size: Surplus material should be piled. Piled material will be cut to lengths of six feet or less, and will not be in contact with any ground fuels greater than three inches in diameter.
Hazardous Fuel processing: The contractor will pile a minimum of 80% of the “green” surplus material having a basal diameter in excess of two (2) inches.
File details come from the government source that posted it. Updated .