SOW OWS B368.pdf
PDF 157 KB Posted
- Attached to
- Clarifier Oil Water Separator Federal contract opportunity
- Solicitation number
- FA462625Q0038
About this file
This Statement of Work (SOW) details the procurement and installation of a Clarifier Oil Water Separator (OWS) for Building 368 at Malmstrom Air Force Base in Montana. The project requires purchasing and installing an SPT-10-E Clarifier Separator System or an approved equivalent, with specific technical specifications including a 1-10 GPM capacity, stainless steel construction, 30-gallon on-board oil storage tank, advanced coalescing media, and a corrosion protection package with Tnemec 61 interior lining. The system's dimensions are approximately 7'L x 2'6"W x 4'-10"H, and it includes features such as electric pump and control, adjustable rotatable pipe skimmers, and multiple inlet/outlet fittings.
The SOW is dated 01 May 2025 and focuses on providing all materials necessary to install and connect the oil water separator in Building 368, with comprehensive equipment requirements that specify technical performance characteristics, electrical specifications, and design elements to ensure effective oil-water separation and containment. The document emphasizes the need for a system that can remove oil droplets greater than 20 microns while maintaining laminar flow, with additional components like a neoprene gasketed removable cover, vent fittings, sludge drains, and a gravity drain system.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment - FA462625Q00380001.pdf | ||
| Solicitation OWS - FA462625Q00380001.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WT 15023625
STATEMENT OF WORK
Clarifier Oil Water Separator B368
MALMSTROM AIR FORCE BASE, MT
01 May 2025
SECTION 1
DESCRIPTION OF SERVICE
1.1 GENERAL REQUIREMENTS
Provide all items and materials required for the completion of the scope of this project.
1.2 SUMMARY OF WORK
A. Purchase of all material necessary to install and connect oil water separator (OWS) in Building 368
1.3 EQUIPMENT SPECIFICATIONS
• SPT-10-E - Clarifier Separator System or other government approve equal.
o 1-10 GPM Clarifier Separator w/Electric Pump & Control, 120V o Approximate dimensions: 7’L x 2’6” W x 4’-10” H o 1-10 GPM Above Ground Clarifier Oil/Water Separator with Sludge Hopper o Stainless Steel Construction o 30-gallon on-board oil storage tank o Advanced coalescing media designed to remove oil droplets greater than 20 microns with a Reynolds Number of less than 500 to maintain laminar flow o Stainless Steel inclined plates to capture and contain settable solids o Solids storage area o Single adjustable rotatable pipe skimmers and 120V disk skimmer with timer o Neoprene gasketed removable vapor tight cover for access to chamber compartments o 2” Inlet/Outlet- FNPT Fitting and (2) 2” Oil Outlet-FNPT Fitting o (2) 2” Vent NPT Fittings to vent unit outside, (2) 2” Sludge drains and (2) 1” Drain
NPT Fittings o Effluent compartment for pump out o (1) Electric 10 GPM Diaphragm Transfer Pump System with Electric Controller o Gravity drain
• Corrosion Protection Package
Statement of Work – OWS B368 o Separator Interior lined with Tnemec 61, 8-10 mils
File details come from the government source that posted it. Updated .