SOW ON479-USQ131 Interconnecting Group_05212026.pdf

STATEMENT OF WORK

ON-479/USQ-131 Interconnecting Group

FOR THE V-22 AIRCRAFT

1.0 SCOPE

This Statement of Work (SOW) establishes the tasks that must be performed by the contractor for the manufacture, assembly, inspection and delivery of Intermediate (I) and Organizational (O) Level Peculiar Support Equipment (PSE) end items for the V-22 Aircraft.

APPLICABLE DOCUMENTS

DFARS Clause 252.204-7012 Safeguarding Covered Defense Information and

Cyber Incident Reporting MIL-HDBK-61A Configuration Management Guidance MIL-HDBK-781A Reliability Test Methods, Plans, and Environments for Engineering Development, Qualification, and Production

MIL-STD-130 Identification Marking of U.S. Military Property MIL-STD-129R Military Marking for Shipment and Storage Drawing 3359AS601, Rev K Cable Assembly, W2, Power, F/A-18, Sheet 1 Drawing 3359AS601, Rev J Sheet 2 Drawing 3359AS611, Rev C Cable Assembly, W11, Data MLVS/APU, Sheet 1 Drawing 3359AS611, Rev B Sheet 2 Drawing 3359AS611, Rev C Sheet 3 Drawing 3359AS613, Rev B Cable Assembly, W13, APR-39A(V)2/MLVS 3359AS613 Parts List, Rev B Parts List PL3359AS613 Drawing 3359AS614, Rev D Cable Assembly, CD-45/ALE-47 (V), Direct Load, W14 3359AS614 Parts List, Rev A Parts List PL3359AS614 Drawing 3359AS615, Rev F Cable Assembly, V-22 FCC, Direct Load, W15

Sheet 1 Drawing 3359AS615, Rev F Sheet 2 Drawing 3359AS615, Rev D Sheet 3 Drawing 3359AS616 Cable Assembly, AN/AAR-47, Direct Load, W16, Sheet 1 Drawing 3359AS616 Sheet 2 Drawing 3359AS616 Sheet 3 3359AS616 Parts List, Rev A Parts List PL3359AS616 Drawing 200AS195, Rev B Plate, Identification, Serial Number Drawing 3359AS510, Rev J Decal, Nomenclature Drawing 3359AS515, Rev F Inventory Decal Drawing 3359AS520, Rev A Label, Unique Identification Drawing 3359AS550, Rev A Transit Case Assembly ON-479/USQ-131 Drawing 3359AS610, Rev A Cable Assembly, W10, Data MLVS/Type 1

Interface Drawing 3359AS854, Rev C ON-479/USQ-131 Interconnecting Group Drawing 3359AS1746, Rev N Plate, Identification

Drawing 52561906-1, Rev A RT-2036 Ethernet Loading Cable NSN 6150-01- 686-8749

Drawing 52561906-2, Rev A ARC-210 DTD Loading Cable NSN 6150-01-686-

Drawing 52561906-3, Rev A ARC-210 C-12561B Ethernet Reprogramming Cable, NSN: 6150-01-686-8776

Drawing A1-48735D, Rev A Cable Assembly, CP-2803/APR-39D(V), Direct Load, W602

Drawing A1-48146D, Rev A Cable assembly Direct Load, W601, CP-2803/APR- 39D(V)

2.0 REQUIREMENTS

2.1 General

The contractor shall provide materials and services as required to procure, manufacture, assemble, inspect and deliver various quantities to support V-22 outfitting of the I and O- Level PSE end items in accordance with the respective Government furnished drawing package as called out below. Items to be delivered within 365 days of award of contract.

CLIN Platform Part Number NIIN Nomenclature Qty 0001 CMV 3359AS854-2 01-723-7568 ON-479/USQ-131 Interconnecting Group 7

2.2 Technical Point of Contact (TPOC) Inspections

The contractor shall notify the NAVAIR TPOC a minimum of thirty (30) days prior to planned shipment the opportunity to inspect, at the discretion of the Government, to ensure continued compliance with the drawings and requirements of the contract.

2.3 Data Deliverables

All deliverable data items shall be provided in accordance with this SOW and Contract Data Requirements List (CDRL), Form DD1423, Exhibit A, A001.

2.3.1 Request for Variance (RFV)

When identified, the contractor shall submit to the government for approval recommendations for Request for Variance, Exhibit A, CDRL A001. The contractor is advised to consult MIL-HDBK-61 Configuration Management when contemplating submitting one of these configuration change requests. These change requests shall be prepared and submitted to the government IAW CDRL A001.

2.4 Quality Assurance Program

The Contractor shall maintain a quality system that ensures that each I and O-level PSE end item is manufactured in accordance with the approved drawings. The Contractor shall hold current AS9100D certification at the time of award and throughout the performance of the contract This will ensure that manufactured configuration items are built to print, functional, and reliably made IAW controlling technical drawings, specifications and standards. Each item manufactured as part of this contract shall have passed a Government final inspection prior to DD-250.

2.5 Item Unique Identification (IUID) Marking of US Military Property

In accordance with DFARS Clause 252.211-7003 Item Identification and valuation, the contractor is required to mark and register all end items and their components meeting the requirements called out in latest version of MIL-STD-130 at time of contract award. These include components for which the Governments unit acquisition cost is $5,000 or greater, or any component, subassembly or embedded part that is serially managed, mission essential or a controlled inventory item.

2.5.1 Construct and Method

Details on creating the UID and the marking method are contained in MIL-STD-130N. The UID may be either UID Construct #1 or Construct #2 with Construct #2 being the preferred method.

2.5.2 UID Location and Marking

The locations and marking methods selected should bear no impact on the performance of the part and minimal configuration change(s) to the part. The UID (including 2D Matrix) should be incorporated onto the data plate, in accordance with drawing 3909AS9999 Rev B. If the 2D matrix can't be incorporated onto the data plate, a 2D matrix sticker can be applied onto the main data plate provided it can be done without covering any critical data.

When the 2D Data Matrix is placed directly onto the data plate, the Part Number, Serial Number and CAGE human readable characters are not required. If the above cannot be accomplished, a separate data plate can be attached which contains the 2D Matrix plus the human readable characters for the Part Number, Serial Number and CAGE. This added data plate should be attached in close proximity to the main data plate.

2.5.3 Permanency and Legibility

The UID marking and identification plates, tags, or labels when used on equipment, parts, assemblies, subassemblies, units, sets, or groups shall be permanent during the normal life expectancy of the item and be capable of withstanding the environmental test and cleaning procedures specified for the item. Legibility shall be as required for ready readability as per MIL-STD-130.

2.5.4 UID Registration

The prime contractor has the responsibility to furnish Item Unique Identification (IUID) data to the IUID registry. Data submission of IUID data and acquisition cost should be via Wide Area Work Flow (WAWF), IUID XML file, IUID flat file or web entry. Additional information regarding data submission as well as the actual marking can be found at <http://www.acq.osd.mil/dpap/UID/>.

2.5.5 Records

The contractor shall maintain an accurate, current list of UIDs for all manufactured items on this contract and supply to the government upon request. The list shall include P/N, Serial #, CAGE, UID Location, Construct used, how it was marked and the registration method used.

http://www.acq.osd.mil/dpap/UID/

2.6 Government Deliveries, Inspection and Acceptance

Inspection and Acceptance shall be performed at Origin by DCMA. FOB shall be Destination.

2.7 Packaging, Handling, Storage and Transportation (PHS&T)

2.7.1 Packaging Requirements

The Contractor, and any subcontractors or vendors shall comply with best commercial practices for PHS&T procedures in the protection of sensitive electronic components from electrostatic discharge damage. The Contractor shall ensure that all unit, intermediate, and shipping containers are marked in compliance with recognized best commercial practices. The Contractor shall select the most economical mode of transportation for equipment, Support Equipment (SE) end items, spare and repair parts consistent with transportation priority, and required delivery dates. For items FOB destination basis, commercial bills of lading shall be used.

2.7.2 Marking

Marking shall be in accordance with MIL-STD-129R. Additionally, special marking labels (fragile, delicate, etc.) shall be applied to all unit, intermediate and shipping containers as an integral part of the total pack. The contractor shall select the appropriate special marking label (s) as additional means to protect the items during packaging, handling, storage, transit, and removal from the pack.

2.8 Cybersecurity Maturity Model Certification (CMMC) Program Cybersecurity is a top priority for the Department of Defense (DoD). The defense industrial base (DIB) faces increasingly frequent and complex cyberattacks. To strengthen DIB cybersecurity and better safeguard DoD information, the DoD developed the Cybersecurity Maturity Model Certification (CMMC) Program to assess DoD cybersecurity requirements pertaining to Federal Contract Information (FCI) and Controlled Unclassified Information (CUI).

The items in this acquisition have been deemed to fall into CMMC Level 2- Self- Assessment. CMMC Level 2 requires implementation of the 110 security requirements set forth in NIST SP 800–171 Rev. 2 to protect CUI in contractor information systems.

Level 2 assessments are conducted every three years. CMMC Level 2 self-assessment scores are entered by the OSA into SPRS.

3.0 Shipping

Shipments shall be transported via a traceable means of transportation. All shipments under this contract shall be addressed per below:

CMV-22

DODACC N4231N

Central Warehouse (NU1) NAVAIR Warehouse B

DSCR, BLDG 44

Richmond, VA 23237 Mark For: CMV-22, Samantha Holland (301) 757-2041 FOB: Destination