SOW N4044320Q0119 GUAD BOILER REPAIR CASREP.pdf

STATEMENT OF WORK

USNS GUADALUPE

BOILER MAINTENANCE

1.0 ABSTRACT

The purpose of this item is to accomplish inspect, groom and adjust control settings of alarms and boiler automation on the Nos. 1 and 2 Auxiliary Oil Fired Boilers.

2.0 REFERENCES/ENCLOSURES

2.1 References:

2.1.1 NAVSEA Technical Manual T9517-AU-MMC-010, Auxiliary Oil-Fired Boiler, Vapor Corp.

(available on board vessel)

2.2 Enclosures: None

3.0 ITEM LOCATION/DESCRIPTION

3.1 Location/Quantity:

3.1.1 Location: Engine Room, Generator flat, Starboard

3.1.2 Quantity: Two (2) boilers.

3.2 Description/manufacturer’s Data:

MFR: Vapor Corp. Model: FNC7-4748-VHK-NCI

MWP: 300 psi @ 425 degrees F Max output: 200 BHP

Capacity: 6900 lbs/hr H.S.: 308 square feet

NR 1: NR 2:

Serial: 22637 Serial: 22638

USCG AB 91CH47909 USCG AB 91CH47909

Natl Bd 9348 Natl Bd 9349

4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICES: None

5.0 NOTES: None additional

6.0 NOT USED

7.0 STATEMENT OF WORK REQUIRED:

7.1 Provide the services of an OEM Authorized Field Service representative to accomplish inspection of servo assembly, grooming and testing of both auxiliary boilers.

7.1.1 Test the operation of all automatic controls and safety devices associated with both boilers using reference 2.1.1 as guidance. Adjust set points on all controls, control valves, and regulating valves. If any parts are worn or defective, replace same to ensure all automatic controls and safety devices operate properly.

7.1.2 Conduct an operational test of all shutdown, boiler automation, and safety devices in the presence of ABS Surveyor, Chief Eng’r, and MSCREP.

7.1.3 Conduct and operational test of the No. 1 & 2 Auxiliary Boiler for 6 hours each.

7.1.4 Provide three (3) copies of service report to MSCREP describing the repair performed and parts replaced, if any, upon completion of repair.

8.0 GENERAL REQUIREMENTS: None

9.0 PERIOD OF PERFORMANCE

4-10 September, 2020.

10.0 PLACE OF PERFORMANCE

Naval Base Coronado

11.0 MSC TERMS AND CONDITIONS

Offers/quotes submitted in response to this solicitation shall not contain nor be subject to the offeror's/vendor's standard commercial terms and conditions. Any offer/quote submitted in response to this solicitation which includes the offeror's/vendor's standard commercial terms and conditions may be considered a material defect and may be rejected as being non-responsive to the solicitation.

12.0 MSC NRFK MANPOWER

The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Military Sealift Command via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs).

The excluded PSCs are:

(1) W, Lease/Rental of Equipment;

(2) X, Lease/Rental of Facilities;

(3) Y, Construction of Structures and Facilities;

(4) S, Utilities ONLY; and

(5) V, Freight and Shipping ONLY.

The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil

Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.

13.0 MSC BASE SHIP EPIC

SHIP & BASE ACCESS (APR 2013)

Defense Biometric Identification System (DBIDS) is being implemented for access to DoD facilities in

CONUS, HI, Guam and Puerto Rico (replaces RapidGate). Vendor is responsible to acquire DBIDS credentials prior to performance start date. Delays that may result from inadequate planning are contractor responsibility. Vendor instructions and program information is available at https://www.cnic.navy.mil/om/dbids.html. DBIDS credentials require (in succession) (1) Present a letter or official document from the Government sponsoring organization that provides the purpose for your access,

(2) Present valid identification, such as a passport or Real ID Act-compliant state driver's license, (3)

Present a completed copy of the SECNAV 5512/1 form to obtain your background check, (4) Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments, and (5) After all of this is done, the contractor will be provided with the DBDIS credential.

For vendors with existing Navy Commercial Access Control System (NCACS) cards, see https://www.cnic.navy.mil/om/dbids.html for instructions to obtain DBIDS credentials. Vendor is responsible to confirm that each employee held DBIDS credentials are active for the specific facility and performance period in accordance with DBIDS.

Additional access permissions may be required in the future.

https://doncmra.nmci.navy.mil/ https://doncmra.nmci.navy.mil/

Vehicle Access: Required for vehicle access to Navy facilities. Follow supplemental instructions on Base

Access forms or base-specific vehicle access forms.

Ship Access List (Vendor-Provided): On company letterhead attachment via email, the vendor is required to provide the ship master (courtesy copy the Port Engineer) with an accurate, current list of performing personnel prior to being admitted aboard the vessel. Under no circumstances will a hand-delivered list be accepted.

T-AKE email address: MASTER@AKE#.NAVY.MIL

(example: master@ake8.navy.mil, where “8” is the hull number).

All other hulls address: MASTER.SHIPNAME@MSC.NAVY.MIL

(example: master.sioux@msc.navy.mil).

(End of Text)