SOW Load Test Service.docx

Statement of Work 173 Maintenance Group, Kingsley Field ANGB Equipment Load Testing Services

1.0 Scope of Work:

Equipment Testing Services: Contractor will provide all equipment, labor, material required to provide on-site testing of 79 equipment items including various slings, utility cranes, lifting devices, s-hooks, test weights, jacks, drum holders and other miscellaneous lifting and hoisting equipment.

1.1 The inspection includes a report along with a load test certificate. Each piece of equipment will be thoroughly inspected during the load test process.

1.2 This process will ensure two things:

1.2.1 The equipment is in sound condition and should be tested; and

1.2.2 No damage was caused during performance of the load test itself.

1.3 List of equipment:

2.0: Contractor Manpower Reporting Application (CMRA):

2.1 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the National Guard Bureau (or your organization) via a secure data collection site.

2.2 The contractor shall completely fill in all required data fields using the following web address: http://www.ecmra.mil/. Reporting inputs shall be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 20XX. Contractors may direct questions to the help desk at http://www.ecmra.mil.

3.0 Anti-Terrorism – Operational Security (AT-OPSEC).

3.1 Access and General Protection/Security Policy and Procedures. This standard language is for contractor employees with an area of performance within Government controlled installation, facility, or area. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the Contracting Officer’s Representative (COR). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by the local installation’s Security Forces, Director of Emergency Services or local Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by DoD, HAF and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

3.2 For Contractors that do not require CAC but require access to a DoD Facility and/or Installation. Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (AFI 10-245, AFI 31-101 and AFMAN 31-113), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.