SOW - Land Mobile Crane Service - MAY 2026.pdf
PDF 96 KB Posted
- Attached to
- Land Mobile Crane and Operator
- Solicitation number
- FA441826Q0055
About this file
STATEMENT OF WORK SUMMARY
This Statement of Work details requirements for land mobile crane and operator services to support vessel cargo off-loading operations at Joint Base Charleston – Naval Weapon Station in Goose Creek, South Carolina, scheduled for May 2026. The Contractor must provide a complete mobile crane package including the crane itself, a National Commission for the Certification of Crane Operators (NCCCO) certified operator, riggers for setup purposes only, all labor, equipment, transportation, management, and supervision necessary for the operation.
The crane must meet specific technical and regulatory standards including current OSHA 1926 Subpart CC and ASME B30 compliance certifications. Critical equipment specifications require outriggers supported by 8'x20' mats (or two 4'x20' mats) extending to a minimum of 29 feet with a target width of 30 feet, single outrigger loads not exceeding 211,000 pounds, and capability to lift cargo weighing up to 64,000 pounds to a minimum clearance height of 5 feet above the vessel. The vessel dimensions are 103.90 meters in length, 16.50 meters in width, and 6.04 meters in height, with a maximum lift distance of 70 feet. Upon 24-hour notification, the Contractor must deliver and pre-position equipment at the designated location for a minimum of 8 calendar days. Off-loading performance is expected to require 10 hours of operation. The Government will provide the spreader bar, spotters, and conduct personnel background checks and badging. All Contractor personnel must complete applicable background checks prior to base access.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - FA441826Q0055.pdf | ||
| WD 15-4427 Rev 32 - 03Dec2025.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
LAND MOBILE CRANE & OPERATOR
Joint Base Charleston – Naval Weapon Station, SC
May 2026
The Contractor shall provide all labor, equipment, transportation, management, and supervision required to provide a land mobile crane, operator, and rigger(s) to assist off-loading vessel cargo at Joint Base Charleston – Naval Weapon Station, Goose Creek SC.
The Crane Operator shall be National Commission for the Certification of Crane Operators (NCCCO) certified or equivalent for the size and type crane to be operated.
The Contractor shall provide a land mobile crane with current inspection and/or in adherence to OSHA 1926 subpart CC, OSHA 1926.1412(f) and ASME B30.5. Slings and/or below the hook lifting devices if utilized shall adhere to ASME B30.9 and/or ASME B30.20 and shall be inclusive of the crane, counterweights, operator, rigger(s) needed for crane set up only. Government will furnish rigger(s). All required equipment shall meet the following requirements:
Outriggers shall be supported by an 8’x20’ mat (or two 4’x20’ mats) centered under the outrigger, with an Effective Length of 20’ based on Mat Strength.
Crane Outriggers shall be extended to at least 29’ with a target width of 30’ A single outrigger load shall not exceed 211,000 lbs (211 kip) Maximum Diagonal Lifting Lug Measurement - 10.70 meters (35’2”) Highest Beginning Lifting Point – +34’ Lowest Beginning Lifting Point – -20’ Vessel Height – 6.04 meters (20’) Vessel Width – 16.50 meters (54’) Vessel Length – 103.90 meters (341’) Maximum Lift Distance - 70’ Maximum Cargo Weight – 64k
The Contractor provided crane must be capable of lifting vessel cargo to a minimum clearance height of 5’ above the vessel.
Upon 24-hour notification to the Contractor, the Government will require delivery and pre-positioning of the crane and all necessary equipment at the designated location. The crane shall remain at the designated location for a minimum of 8 calendar days. Upon a separate 24-hour notification, the Contractor will provide the crane operator and personnel to perform off-loading requirements. Off-loading performance is expected to be 10 hours in duration, not to include travel to the designated location.
Contractor personnel requiring access to JB CHS shall submit to all applicable background checks prior to receiving a contractor’s pass/badge to accomplish work or enter the installation.
The government will provide a 20’ Tandemloc Autoloc Spreader. The government will also perform spotters during off-load operations.
File details come from the government source that posted it. Updated .