SOW IPF Detroit CNC Plasma.docx

Statement of Work CNC Plasma system for IPF Detroit IOD-Compliance

1. GENERAL

1.1 Background

The US Coast Guard is seeking to procure a CNC Plasma system. The system will be used for all daily metal fabrication requirements by the Industrial Production Facility (IPF) Detroit, MI.

1.2 Scope

The manufacturer shall furnish and deliver a Hypertherm Powermax 125plasma, machine Torch with a 35-foot lead, with a ArcLight Dynamics Arc Max 5’X10’ CNC Plasma Table or equivalent. This system shall be delivered to U.S. Coast Guard IPF Detroit, MI attention to the Work Lead, Luke Woolum.

The CNC Plasma system must include the following:

· (1) ArcLight Dynamics Arc Max 5’X10” CNC Plasma Table

· (1) Bend-Tech SM Sheet Metal Software (BTSM)

· (1) Arc Sync Kit for Hypertherm Plasma Cutters (Arc-Sync)

· (1) Hypertherm Powermax 125 with Machine Torch, 35-foot lead (05-0125-035)

· (1) 55-gallon drum, Quench Guard G Anti-Corrosive additive.

· (1) Five Stage Air Filtration System for ArcLight Tables

· (1) Mobile Control Cabinet for ArcLight Arc Pro Tables

· (1) CNC Router Accessory for ArcLight Arc Max 5X10 Tables

· (1) Plate Marker for ArcLight Tables

· (1) Auto Tracer for ArcLight Tables

· (2) Copies of Operator, Service, and Parts Manuals.

· Vendor shall provide a minimum 3-year manufacture warranty.

2. REQUIREMENTS

2.1 General

The CNC Plasma system shall be industrial grade production model consisting of coordinated components and certified by the manufacturer. The model shall have been in production for a minimum of three years and have a minimum three-year manufacturer’s warranty. The table comes will an industry leading 3-year warranty on its controller and control system, 2-year warranty on all electronics, and a limited lifetime warranty on the table frame. The furnished system shall have a production date within six months of the delivery date.

2.2 Capacity

The CNC Plasma system shall be 480volts, 3 phase, 50 amps or less. The rated capacity and the date of manufacture of the system shall be permanently affixed in an obvious/visible location.

2.3 Spare Parts

Manufacturer shall have readily available all necessary parts, special fluids and materials to complete planned maintenance for a minimal of 10 years. Parts shall be delivered to the Work Lead, Industrial Production Facility, Detroit, MI when ordered.

2.4 Delivery Location

Location USCG IPF Detroit, MI

U.S. Coast Guard IPF Detroit is located at 110 Mount Elliott ST Detroit, MI 48207-4380. Arrangements for delivery shall be made with the IPF Detroit Work Lead, Luke Woolum at (313) 656-2680. Delivery times shall be between the hours of 7:00 AM to 3:00 PM local time, Monday through Friday inclusive. Unloading as well as assembly of the items (if required) from the delivery vehicle shall be the responsibility of the vendor.

2.6 References

The CNC Plasma system shall be in accordance with the standards and specifications of the referenced technical organizations for the construction methods, materials, application, and environment as applicable. These may include but not be limited to:

a. ISO Standards.

b. American National Standards Institute (ANSI).

c. National Electrical Manufacturers Association (NEMA).

d. All applicable OSHA standards.

3. PERIOD OF PERFORMANCE

The period of performance is sixty (60) Calendar days from date of contract award. If applicable, award of Optional Item is expected to take place within 45 Calendar days of award of base items.

3.1 Contracting Officer’s Representative

a. COR information will be provided at time of award.