SOW FOR WATER SOFTENER SALT2.docx
DOCX document 15 KB Posted
- Attached to
- Water Softener Salt Delivery FY 2025
- Solicitation number
- 15B50825Q00000007
About this file
This document is a Statement of Work (SOW) for a water softener salt delivery requirement at the Federal Correctional Complex in Forrest City, Arkansas. The SOW specifies that the contractor must provide approximately 25 tons of water softener salt every 2-3 weeks, for a total of around 22 loads per year. The salt must conform to ANSI/AWWA Standard B-200 and be certified to ANSI/NSF Standard 60, with a minimum of 99.5% sodium chloride content and low insoluble and moisture content. Bidders must be registered in the SAM system and provide their SAM registration number. The related federal contract opportunity has the solicitation number 15B50825Q00000007 and is being issued by the Department of Justice Bureau of Prisons Federal Correctional Complex in Forrest City.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 15B50825Q00000007 RFQ Salt Delivery Bulk Mod1.pdf | ||
| Bulk Softner Salt.docx | DOCX document | |
| 15B50825Q00000007 RFQ Salt Delivery Bulk.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SOW FOR WATER SOFTENER SALT
A. INTRODUCTION
The Federal Bureau Of Prisons FCC Forrest city is Located at 1400 Dale Bumpers Road Forrest City Ar, 72335. We are currently seeking bids for water softener salt delivered to this address. The salt can be transferred pneumatically in a tank that will hold approximately 40 tons of salt. Salt delivery will be scheduled at 25 tons every 2 to 3 weeks to this location. Approximately 22 loads per year. Bidders must be registered in SAM and must attach their registration # to bids.
B. REQUIREMENTS
Acceptable for regeneration of water softener ion exchange resins and conforms to the requirements of NSF/ANSI/CAN Standard 60 - Drinking Water Treatment Chemicals – Health Effects and also meets the AWWA Standard for Sodium Chloride B-200. These products are intended for use in commercial water softeners .These products contain no known allergens and exhibit virtually no microbiological activity.
· ANSI/AWWA Standard B200
· Certified to ANSI/NSSF Standard 60
· 99.6% pure salt.
· Low insoluble content.
· Crystals resist mushing and bridging.
· Reduces accumulation of brine tank residue.
· Resists bridging and mushing in tank.
C. ANALYSIS RANGE
*Sodium Chloride (%) 99.5 Minimum Other Salts (%) 0.5 Maximum Water Insolubles (%) 0.1 Maximum Moisture (Surface) (%) 0.15 Maximum
File details come from the government source that posted it. Updated .