SOW for Pulse Shaper (R400-3A5) 11 May 2022.doc
DOC document 47 KB Posted
- Attached to
- Repair and Recondition the following equipment: PULSE SHAPER MODULE PN: 1A20768A01, ASN: R400-3A5
- Solicitation number
- NW-WG3401-23-170
About this file
This statement of work outlines requirements for the repair and reconditioning of RF pulse shaper modules used in Next Generation Radar (NEXRAD) systems. The contractor shall clean, evaluate, test and repair each module to meet all electrical, mechanical and cosmetic specifications, replacing any damaged or non-functioning parts to return them to like-new condition. The National Weather Service will provide source control drawings, test specifications and schematics to guide the work. The contractor must provide all parts and perform repairs at the component level. Modules must pass inspection and testing at the National Reconditioning Center to verify proper functionality in NEXRAD systems. The related solicitation is for the repair and reconditioning of the RF pulse shaper module with part number 1A20768A01 and asset number R400-3A5, to be awarded by the Department of Commerce National Oceanic and Atmospheric Administration.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CAR 1352.209-74.docx | DOCX document | |
| 52.222-48 Exemption from Appl of the SC Labor Standards.pdf | ||
| Evaluation Factors.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work Repair and Recondition: Next Generation Radar (NEXRAD) RF Pulse Shaper Module
ASN: R400-3A5, NSN: 6625-01-316-0780
Version: May 11, 2022 Description: The Contractor shall repair and recondition the RF Pulse Shaper Module to “Like New” operating condition in accordance with specifications listed. The repair and recondition price shall include the parts, materials, labor, inspection and return shipping necessary to return the RF Pulse Shaper Module to operational specifications. Repair materials differing from the source specification must be approved by the National Weather Service prior to use.
Definition: “Like New” Condition means reconditioned to the listed specification to meet all applicable electrical, mechanical, and cosmetic specifications and Engineering documentation, including the replacement of damaged or missing non-functioning parts.
Government Furnished Equipment: None.
Government Furnished Data: The following documents provided upon request:
Source Control Drawing No. 1A20768
Test Specification No. 1A24848
Schematic Diagram No. 1D28371
Illustrated Parts Breakdown Drawings
3A5 No. 1D27602
3A5A1 No. 1D27591
3A5A2 No. 1D27452
Bill of Materials Drawings
3A5 No. 1D27602G01
3A5A1 No. 1D27591G01
3A5A2 No. 1D27452G01
Vendor Furnished Equipment: Vendor shall provide all parts and supplies as required to accomplish the repair and reconditioning actions.
Recommended Equipment and Supplies: None.
Description of Work – Work Procedure: Clean, evaluate, test, repair and recondition each RF Pulse Shaper Module to ensure the unit meets all requirements in the documents listed in the “Government Furnished Data” and is returned to “Like New” condition. If major defects exist that would prevent repair of the unit, contact the Contracting Official who will notify the National Reconditioning Center (NRC).
Warranty Terms: Vendor will provide a 1-year warranty against material workmanship and against faults occurring during operation. This 1-year warranty will begin after passing the final equipment inspection and acceptance for stock.
NRC Final Acceptance: All repaired and reconditioned RF Pulse Shaper Modules are subject to Performance Quality Assurance testing/inspection and will be returned for corrections if discrepancies are found. All repaired and reconditioned RF Pulse Shaper Modules will be inspected for material workmanship and tested for operational performance at the NRC in accordance with the listed specifications. To meet the material workmanship requirements, the RF Pulse Shaper Modules will need to be in a “Like New” condition and good appearance to include connector caps in place. The NRC’s Inspection Branch will verify units meet operational requirements by testing each unit for proper and accurate functionality in the NEXRAD system, which includes verifying the output pulse width is adjustable, and it passes all diagnostics tests. Any inspected item that does not meet the acceptance criteria will be returned to the vendor for rework at no additional cost to the government.
Deliverables: Each repaired and reconditioned RF Pulse Shaper Module, by serial number, shall be supplied with a Repair Report documenting the repair, reconditioning, and inspection to include results of all tests and failure analysis.
Shipping Address:
NATIONAL RECONDITIONING CENTER (NRC)
14200 MERRITT RD.
GRANDVIEW, MO. 64030
Transportability: Vendor is responsible for returning repaired products in a shipping container designed to withstand the vibration and shock encountered during transportation by ship, rail, truck, and aircraft. The units shall be packaged to prevent damage to include: physical, electrical, mechanical, cosmetic, and the units shall not be damaged or lose performance capability.
Final Note: When unforeseen problems arise that may need clarification, please contact the Contracting Officer who will notify the NRC. If the unit has any problem that prevents a quality repair, do not work on the item until the issue can be resolved.
NRC Reviewed:
NEXRAD Repair Branch Review: Richard Vogel, Branch Chief, May 11, 2022 TI&MR Branch Review: Gregory Flores, Branch Chief, May 11, 2022
File details come from the government source that posted it. Updated .