SOW - EN7097 and EN7098.docx
DOCX document 370 KB Posted
- Attached to
- (EN7097) (EN7098) - LIGHTS, SIREN & STRIPING
- Solicitation number
- 1240LS26Q0021
- Issued by
-
Department of Agriculture Forest Service
About this file
This is a Statement of Work (SOW) for the installation of lights, siren, and console equipment on two 2026 vehicles for the U.S. Forest Service (USFS). The scope covers a 2026 Ford F250 Crew Cab (Door #7097, VIN# 1FT7W2BA5TEE32203) and a 2026 Chevrolet 2500 Crew Cab (Door #7098, VIN# not yet delivered). The USFS will deliver and retrieve vehicles within 250 road miles of 370 American Ave., Jerome, ID 83338, with the vendor responsible for towing beyond that radius. The vendor must complete all work within 10 days of delivery, with a 30-day advance notice required for delivery scheduling.
The lightbar installation requirements include a 55-inch LED strobe light bar with 360-degree red/white FIRE capability, take-down and alley/scene lights, amber directional traffic director lights with night dimming capability, two LED red/white strobes in the front grill upper corners, two red LED strobes on the rear bed, two red LED lights in the taillight housing, and a siren/light controller with PA microphone and traffic director controls. The siren and electronics package requires installation of a FS-supplied BK Tech KNG M150 radio through a charge guard battery drain protector with roof-mounted antenna, integrated into a custom 20-inch sloped wide-body heavy-duty welded steel cab center console featuring dual cup holders, magnetic mic holders, locking 9" external storage box, height-adjustable armrests, and wired 12-volt and USB outlets with individual fuse protection. Aftermarket console setup is authorized as an exception to standard policy, no used parts are permitted, and striping is not required. The vendor must supply all necessary wiring, hardware, connectors, and vehicle-specific mounting plates, with the USFS providing the radio, antenna, coax, and charge guard components.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ - 1240LS26Q0021.docx | DOCX document | |
| SERVICE CONTRACT LABOR EXEMPTION FORM.doc | DOC document | |
| RFQ - 1240LS26Q0021.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Vehicle Information:
Door # 7097: 2026 Ford F250 Crew Cab, VIN# 1FT7W2BA5TEE32203.
Door # 7098: 2026 Chevrolet 2500 Crew Cab. VIN# Unknown (Not Delivered yet)
Delivery Location:
USFS will deliver and pick up the vehicle within 250 road miles of: 370 American Ave. Jerome ID 83338 . Vendor will have to tow to and from beyond 250 road miles of this location.
Special Notices:
A 30 Day notice will be required for delivery of the vehicle to vendor. Vendor must complete work on the vehicle within 10 days of delivery to the vendor.
While aftermarket parts are not normally authorized, Aftermarket console setup is required for both installations. The exception is authorized on both vehicles. No used parts are authorized.
Requirements: Lightbar Supply and install light bar, grill lights, rear lights, and siren/speaker/control head with truck key switch “On” activated power, dedicated circuit with appropriate current protection --Supply and install LED strobe light bar, approx. 55 inches (best fit), 360 deg. red/white FIRE, take down and alley/scene lights, amber directional traffic lights, mounted to roof (see attached sheet for configuration) with lowest profile and rearward as possible. Rear facing Amber LED Traffic Director, Dim Option for night operations with vehicle specific mounting.
--Supply and install two (6) LED red/white strobes in upper corners of front grill --Supply and install two red LED strobe lights on upper rear of bed --Siren/light controller, with PA microphone, traffic director control, and separate controls for all light bar options (alley, takedown, etc.).
--Two Red LED lights to be inserted into taillight housing for rear warning, synched with grill lights.
--Park/kill & timed out relay for battery drain protection.
--Wiring kit, power panel, wire harness, misc. hardware & supplies as required.
Requirements: Siren & Electronics: Siren, Radios, and Console Install FS Supplied Radio Package into center console. BK Tech KNG M150 Powered through FS supplied Charge Guard (battery drain protector). Antenna roof mounted as far rearward as possible. Unit in console with correct mount plate. KNG-M150 single piece mobile with it for installation. The radio will need to be on a charge guard set/wired for ignition control, and on its own fuse. Along with the radio USFS will provide the antenna, coax, connector, and charge guard. The installer will need to order and provide the appropriate face plate to match the console brand. Hole alignments vary so they aren’t universal.
Supply and install sloped wide-body heavy duty cab center console with appropriate vehicle specific mounting plate and options specified below.
--One 20” sloped wide-body heavy duty console, 11 gauge welded steel construction --One internal dual cup holder --Radio model specifically mounting faceplate(s) as needed --One light/siren control mounting faceplate for controller provided --Supply two magnetic mic holders for radio and siren controller microphones mounted to console --One 9” external wide-body locking storage box attached to rear of primary console --Two 9” height adjustable arm rests mounted to console sides --Console wired with two 12-volt outlets and two USB outlets, individual fuse protected power supply for mobile radios, power supply for lights/siren controller wired with truck “on”
Requirements: Striping:
None image1.png image2.png
File details come from the government source that posted it. Updated .