SOW Elevator Lobby Doors.docx

STATEMENT OF WORK

A. GENERAL INFORMATION

1. Title of Project: Elevator Lobby Doors

2. Scope of Work: The contractor shall provide all resources necessary to remove and replace (8) existing metal doors for the 11th & 12th floor elevator lobby at the Region IX Office located at 1111 Broadway, Suite 1200, Oakland, California, 94607. New doors installed shall match color of existing doors and meet or exceed the current fire ratings.

3. Performance Period: The contractor shall complete the work required under this SOW in 60 calendar days or less from date of award, unless otherwise directed by the Contracting Officer (CO).

All scheduling of services shall be mutually agreed upon between the Government and the Contactor prior to the start of services. The contractor shall be given 24-hour notice for when work is required and requested. Call out for work will be for two workers at a minimum of 4 hours per callout.

Work performed is expected to be within and outside of regular business hours, depending on specific tasking. Regular business hours are Monday through Friday, 8am to 4pm. Any work performed outside the regular business hours shall be approved by the CO and coordinated with the on-site point of contact.

4. Type of Contract: Firm-Fixed-Price

B. GENERAL

Work shall proceed expeditiously and during schedule timeframes as coordinated with the on-site point of contact. After-hours work may be approved for this project to limit the impact to the Government.

C. STATEMENT OF WORK

1. 11th & 12th Floor Elevator Lobby Doors

a. Remove and discard of (8) existing metal doors.

b. Provide and install (8) 3090 hollow metal doors.

c. Remove and install automatic door system hardware including all remaining door components.

d. Provide and install new hinges, stainless push plates, stainless lower kick plates, and astragal.

e. Install locking hardware in stationary/inactive leaf.

f. Cut-in and install 12” x 12” vision lite windows to match existing doors.

g. Patch and paint any wall damage to match existing.

h. Dispose of waste materials through means of recycling or landfill.

2. Electrical Support

a. Remove existing wiring for low-voltage electrical strikes and electrified mortise locks.

b. Install and terminate wiring for electrified mortise lock.

c. Install and terminate wiring for electrified strike.

3. Option Service – Flooring

a. Provide and install new surface mount closers in place of existing.

D. PERMITS, ROYALTIES, AND LICENSES

The contractor shall, without additional an expense to the Authority, be responsible for obtaining all licenses, certifications and permits which are necessary to fulfill the requirements of the Statement of Work.

The contractor shall also obtain and pay the costs of any royalties and licenses for any patented or copyrighted items used in the performance of work.

Insurance requirements for successful vendor (proof required and submitted before work to begin).

a. Workers compensation Insurance as required by state law.

b. Commercial general liability insurance in the minimum amount of three million dollars.

c. Employer’s liability insurance in the minimum amount of three million dollars.

d. Business automobile insurance in the minimum amount of three million dollars.

E. Safety

The contractor shall perform all its activities pursuant to this contract in a safe manner.

The contractor shall assume responsibility on the job site for the actions of all its personnel and subcontractor(s) who are associated with performance on this contract. The contractor shall take adequate measures to prevent injury to the public or Authority property on the job site

SECURITY: All personnel require access to information up to the sensitive but unclassified, for official use only (FOUO) levels. Contractor must ensure contractor employees receive a favorably adjudicated public trust suitability prior to entry on duty (EOD). All individuals will be U.S. citizens. The contractor shall follow the standards established within DHS and FEMA policy.

Certificate of training is required for all cleared contractor employees who are working with classified or unclassified information. All certificates must be sent to the assigned FEMA Contracting Officer Representative (COR), before the contractor or subcontractor is granted access to classified or unclassified information but no later than 30 calendar days after awarded contract. Send certificates of completion for Unauthorized Disclosure, OPSEC, and Insider Threat to the FEMA COR no later than 30 calendar days after awarded contract. New employees entering the contract must receive the briefing within ten (10) business days of joining the contract.

Unauthorized Disclosure of Classified or Unclassified Information Contractors and subcontractors who are working on this contract shall receive Unauthorized Disclosure of Classified or Unclassified Information training.

Access to the training can be obtained at:

https://securityawareness.usalearning.gov/disclosure/index.html

OPSEC Training Contractors and subcontractors who are working on this contract shall receive the OPSEC Awareness Brief.

Access to the briefing can be obtained at https://securityawareness.usalearning.gov/opsec/index.htm

Insider Threat Training Insider Threat training for contractors can be found at:

https://securityawareness.usalearning.gov/itawareness/index.htm#

For Official Use Only (FOUO) Information In accordance with DHS Management Directive 11042.1 contractors, consultants and others to whom access is granted will abide by 11042.1; DHS policy regarding the identification and safeguarding of sensitive but unclassified information originated within DHS. It also applies to other sensitive but unclassified information received by DHS from other government and non-governmental activities.

The contractor shall:

1. Be aware of and comply with the safeguarding requirements for “For Official Use Only” (FOUO) information as outlined in this directive.

1. Participate in formal classroom or computer-based training sessions presented to communicate the requirements for safeguarding FOUO and other sensitive but unclassified information.

1. Be aware that divulging information without proper authority could result in administrative or disciplinary action.

Contractors and consultants shall execute a DHS Form 11000-6, Sensitive but Unclassified Information Non Disclosure Agreement (NDA), as a condition of access to such information. Other individuals not assigned to or contractually obligated to DHS, but to whom access to information will be granted, may be requested to execute an NDA as determined by the applicable program manager. Execution of the NDA shall be effective upon date of the DHS Policy and not applied retroactively.

FEMA does not intend to share PII with this contractor, however it is possible during the course of their duties that they may come into contact with documents containing PII. Privacy and cyber security clauses are in place to ensure contractor compliance with proper PII handling procedures.

1. APPLICABLE DOCUMENTS: Employee Identification - Contractor personnel working on this requirement shall wear an identification badge that, at minimum, displays the contractor’s name, the employee’s photo, and the employee’s name. Contractor employees shall comply with all Government escort rules and requirements. Provide manufacturer documentation for maintenance performance schedule.