SOW.pdf

DEEP OCEAN SIMULATION FACILITY PUMP REFURBISHMENT

NAVFAC EXWC, Port Hueneme, CA

1. GENERAL INTENTION AND SCOPE OF WORK

The 24-inch pressure vessel is a Navy owned facilities in the west coast that can simulate full ocean underwater pressure/depth. The 24-inch hydro-pac intensifier assembly is in need of refurbishment, it is a certified system that requires OEM parts and testing.

1.1 Statement of Work

The contractor shall furnish all labor, management, supervision, tools, materials, test equipment, incidental engineering, and repair parts to refurbish the Hydro-Pac intensifier assembly. All work shall be performed during Regular Working Hours at the manufactures facility.

1.1.1 Work Requirements

a. Removal from facility

1. The Navy will remove the intensifier assembly and send it to the manufactures for refurbishment.

b. Refurbishment:

1. The vendor shall disassemble and inspect the intensifier assembly

2. The vendor shall

3. The rebuild will consist of completely disassembling the intensifier, visually inspecting for worn or damaged parts and then reassemble with high-pressure seals, packing, check valve trim and hydraulic seals.

4. The vendor shall re-assemble the intensifier and as a final step, the vendor will paint the unit the original color, if possible.

c. Testing

1. The vendor shall test the completed intensifier at full pressure and then cycle it at 70-80% of the rated pressure for one hour.

2. The vendor shall document successful testing of intensifier assembly.

d. Return to facility

1. The manufacture shall ship the intensifier assembly after fully tested to NAVFAC EXWC 1100 23rd Ave Port Hueneme CA 93043. ATTN: Deep Ocean Simulation Facility (DOSF)

1.2 LOCATION

The location of the work shall be at the manufactures facility.

1.3 PROJECT DURATION

15 Sept 2021 through 8 March 2022

1.4 SAFETY

The vendor shall follow their in-house safety procedures at their facility.

2 INSTALLATION AND WORKMANSHIP

Installation of materials shall be as specified by the manufacturers of the products. The work shall be accomplished by skilled workmen, in conformance with the best practices of the particular trade.