SOW.pdf

REPORT OF WORK

(ROW)

For One Time Purchase for Cincinnati

Machines, LLC

PREPARATION DATE: (10/20/2020)

PREPARING ORGANIZATION: 552nd MXG/FAB TINKER AFB OK 73145

1. 552 MXS/MXMFM is requesting to pay for a Cincinnati Lathe to perform manual lathe machining operations. Currently our Cincinnati lathe is inoperable therefore, our 3 level airman are unable to be signed off on manual lathe task required to achieve their 5 level status. The manual lathe we have is a Cincinnati which is why we are requesting to replace it with a new model Cincinnati lathe that requires the same power output, input, and tooling. This new lathe would be a plug and play because we can use the existing tooling and power source that we already have.

Currently we are very limited on power and would require civil engineering to run a new power source from the Bus bar if an alternate machine is purchased. Finally, Cincinnati lathes are what is used in all Metals Technology shops throughout the Air Force and in our tech school.

a. PURCHASE CINCINNATI LATHE AND ACCESSORIES

b. DELIVERY TO TINKER AFB

2. The delivery personnel will be escorted on base and into the Metals Technology Shop and will need to be required to have the proper credentials to access a military instillation. this includes delivery personnel must be American citizen and have no criminal record.

3. Delivery personnel should coordinate special instructions (if any) with SSgt Carl Lindholm at (405)-736-7380 prior to delivery and on the day of delivery. Such as but not limited to when the technician will arrive.