SOW.pdf

208 KB Posted

Attached to
PISTON HOUSING
Solicitation number
SPMYM221Q1259
Issued by

View the file

Other files

File Type Posted
COC.pdf PDF
CDRLS.pdf PDF
20-Q-1259.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Statement of Work for DOC Number: 10788275

89OE319901 F01,

JML Item Number: 001 Place of Performance: Vendors Facility Required Delivery Date: 25 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) each “PISTON HOUSINGs” per DWG 8577068 Revision (-), PC-1.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) each Piston Housing per DWG 8577068(-), PC-1. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577068(-) Piston Housing

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

The following actions are required:

A. Passivation per note 3 IS NOT REQUIRED

Starting material for the Piston Housing. Starting Material Specification: ASTM A276, UNS S21800, NITRONIC 60, STRAIN HARDENED TO LEVEL-2.

3. Deliverable Items: Four (4) each Piston Housing per DWG 8577068 (-).

Overnight delivery is required.

Mail to:

Attention: DOC 10788275 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4) Piston Housing have been machined in accordance with drawing 8577068(-).

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil.

Any items concerning contractual requirements or funding must be addressed to the Contracting Officer as well as the surveillance officer

Statement of Work for DOC Number: 10788276

JML Item Number: 002 Place of Performance: Vendors Facility Required Delivery Date: 25 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) each “PISTONs” per DWG 8577069 Revision (A), PC-1.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) each Piston per DWG 8577069(A), PC-1. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577069(A) Piston

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

The following actions are required:

A. Passivation per note (5) IS NOT REQUIRED

Starting material for the Piston.

Starting Material Specification: ASTM A564,CRES 630, (UNS S17400)

3. Deliverable Items: Four (4) each Piston per DWG 8577069(A).

Overnight delivery is required.

Mail to:

Attention: DOC 10788276 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4) Piston have been machined in accordance with drawing 8577069(A).

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil.

Any items concerning contractual requirements or funding must be addressed to the Contracting Officer

Statement of Work for DOC Number: 10788277

JML Item Number: 003 Place of Performance: Vendors Facility Required Delivery Date: 28 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) each “CUTTER BODY WITH HANDLEs” per DWG 8577070 Revision (A), PC-1.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) each Cutter Body with Handle per DWG 8577070(A), PC-1. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577070 (A) Cutter Body with Handle

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

The following actions are required:

A. Passivation per note (4) IS NOT REQUIRED

Starting material for the Piston.

Starting Material Specification: ASTM A564, H1150, CRES 630 (UNS S174000)

3. Deliverable Items: Four (4) each Cutter Body with Handle per DWG 8577070 (A).

Overnight delivery is required.

Mail to:

Attention: DOC 10788277 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4) Cutter Body with Handle have been machined in accordance with drawing 8577070 (A).

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil.

Any items concerning contractual requirements or funding must be addressed to the Contracting Officer

Statement of Work for DOC Number: 10788278

JML Item Number: 004 Place of Performance: Vendors Facility Required Delivery Date: 28 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) each “CARTRIDGE HOLDER ASSEMBLIES” per DWG 8577071 Revision (-), PC-A1.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) each Cartridge Holder Assemblies per DWG 8577071(-), PC-A1. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577071(-) CARTRIDGE HOLDER

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

A. Passivation per note (4) IS NOT REQUIRED

Starting material for the Cartridge Holder Assemblies.

PC1 BASE: ASTM A564, H1150, CRES 630 (UNS S174000)

PC2 DOVETAIL: ASTM B150, AL BR, STANDARD STRENGTH HR50 (UNS-C63000)

3. Deliverable Items: Four (4) each Cartridge Holder Assemblies per DWG 8577071(-).

Overnight delivery is required.

Mail to:

Attention: DOC 10788278 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4) Cartridge Holder Assemblies have been machined in accordance with drawing 8577071(-).

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil. Any items concerning contractual requirements or funding must be addressed to the Contracting Officer as well as the surveillance officer

Statement of Work for DOC Number: 10788279

JML Item Number: 005 Place of Performance: Vendors Facility Required Delivery Date: 28 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) each “PISTON SEALING RING” per DWG 8577074 Revision (A), PC-1.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) each Piston Sealing Ring per DWG 8577074(A), PC-1. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577074(A) PISTON SEALING RING

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

A. Passivation per note (3) IS NOT REQUIRED

Starting material for the Piston Sealing Ring.

ASTM A484, CRES 304 (UNS S30400)

3. Deliverable Items: Four (4) each Piston Sealing Ring per DWG 8577074(A).

Overnight delivery is required.

Mail to:

Attention: DOC 10788279 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4) Piston Sealing Ring have been machined in accordance with drawing 8577074(A).

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil. Any

Statement of Work for DOC Number: 10818275

JML Item Number: 006 Place of Performance: Vendors Facility Required Delivery Date: 28 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) each “RETAINING CAP” per DWG 8577075 Revision (A), PC-1.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) each Retaining Cap per DWG 8577075(A), PC-1. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577075(A) RETAINING CAP

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

A. Passivation per note (4) IS NOT REQUIRED

Starting material for the Retaining Cap.

ASTM A564, CRES 630, (UNS S17400)

3. Deliverable Items: Four (4) each Retaining Cap per DWG 8577075(A).

Overnight delivery is required.

Mail to:

Attention: DOC 10818275 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4) Retaining Cap have been machined in accordance with drawing 8577075(A).

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil. Any items concerning contractual requirements or funding must be addressed to the Contracting Officer as https://safe.apps.mil/

Statement of Work for DOC Number: 10818276

JML Item Number: 007 Place of Performance: Vendors Facility Required Delivery Date: 28 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) each “FIRING PIN GUIDE” per DWG 8577078 Revision (A), PC-1.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) each Firing Pin Guide per DWG 8577078(A), PC-1. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577078(A) FIRING PIN GUIDE

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

A. Passivation per note (4) IS NOT REQUIRED

Starting material for the Firing Pin Guide.

ASTM A693 OR ASTM A564, CRES 630 (UNS S17400)

3. Deliverable Items: Four (4) each Firing Pin Guide per DWG 8577078(A).

Overnight delivery is required.

Mail to:

Attention: DOC 10818276 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4) Firing Pin Guide have been machined in accordance with drawing 8577078(A).

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil. Any

Statement of Work for DOC Number: 10818277

JML Item Number: 008 Place of Performance: Vendors Facility Required Delivery Date: 28 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) each “CAP” per DWG 8577080 Revision (-), PC-1.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) each Cap per DWG 8577080(-), PC-1. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577080(-) CAP

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

A. Passivation per note (3) IS NOT REQUIRED

Starting material for the CAP.

ASTM A276, 316, CONDITION A (UNS S31600)

3. Deliverable Items: Four (4) each Cap per DWG 8577080(-).

Overnight delivery is required.

Mail to:

Attention: DOC 10818277 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4) Cap have been machined in accordance with drawing 8577080(-).

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil. Any

Statement of Work for DOC Number: 10818278

JML Item Number: 009 Place of Performance: Vendors Facility Required Delivery Date: 28 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) each “LATCH” per DWG 8577081 Revision (-), PC-1.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) each LATCH per DWG 8577081 (-), PC-1. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577081 (-) LATCH

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

A. Passivation per note (2) IS NOT REQUIRED

Starting material for the LATCH.

ASTM A564, CRES 630, CONDITION H1150 (UNS S17400)

3. Deliverable Items: Four (4) each LATCH per DWG 8577081 (-).

Overnight delivery is required.

Mail to:

Attention: DOC 10818278 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4) LATCH have been machined in accordance with drawing 8577081 (-).

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil. Any

Statement of Work for DOC Number: 10818279

JML Item Number: 010 Place of Performance: Vendors Facility Required Delivery Date: 28 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) SETs “SAFTY COVER” per DWG 8577097 Revision (-), PC-1 and PC-2.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) SETs SAFTY COVER per DWG 8577097 Revision (-), PC-1 and PC-2. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577097 (-) SAFETY COVER

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

Starting material for the SAFTY COVER.

ASTM B209,ALUMINUM ALLOY 6061,TEMPER T651 (UNS A96061)

3. Deliverable Items: FOUR (4) SETs SAFTY COVER per DWG 8577097 Revision (-), PC-1 and PC-2 Overnight delivery is required.

Mail to:

Attention: DOC 10818279 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4) sets SAFTY COVER have been machined in accordance with drawing 8577097 (-).

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil. Any

Statement of Work for DOC Number: 10818280

JML Item Number: 011 Place of Performance: Vendors Facility Required Delivery Date: 28 MAY 2021

1. BACKGROUND: Puget Sound Naval Shipyard (PSNS), requires finish machining of FOUR (4) ea “TRIGGER KEEPER” per DWG 8577091 Revision (-), PC-1.

2. SCOPE: The contractor will provide services for machine work as described below to finish machine FOUR (4) ea TRIGGER KEEPER per DWG 8577091 Revision (-), PC-1. Contractor will also provide any and all starting material, necessary consumables such as machine tool inserts, and Hazmat.

References: DWG 8577091 (-) TRIGGER KEEPER

NOTE: ALL DRAWINGS/ TBV'S WILL BE MADE AVAILABLE TO JCP CERTIFIED VENDORS

BY REQUEST VIA DOD SAFE AT https://safe.apps.mil/

Exceptions and clarifications to the drawings are listed below.

Starting material for the TRIGGER KEEPER.

ASTM A240, NITRONIC 60, UNS S21800, CONDITION A

3. Deliverable Items: FOUR (4) ea TRIGGER KEEPER per DWG 8577091 Revision (-), PC-1 Overnight delivery is required.

Mail to:

Attention: DOC 10818280 1400 Farragut Ave, Bldg. 514 Bremerton, WA 98314

4. Contractor Furnished Materials: Contractor is to furnish labor as described in the “Scope” section above, including any and all necessary starting material, consumables such as disposable inserts and Hazmat.

5. Quality Assurance Requirements: A Certificate of Compliance (COC) per DI-MISC-81356, stating the FOUR (4)ea TRIGGER KEEPER have been machined in accordance with drawing 8577091(-)

6. Security: All references and deliverable items associated with this task are unclassified.

There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

7. Travel: There are no known travel requirements.

8. Government Surveillance Officer: Willis Castle, C/127, 360-627-5175, willis.castle@navy.mil. Any

File details come from the government source that posted it. Updated .