SOW.pdf

Statement of Work (Service)

TITLE: REPAIR - Frequency Extension Module

Requesting Laboratory / Division / Group:

Communications Technology Laboratory Radio Frequency Technology Division High Speed Waveform Metrology Group (672.03)

Scope of Work:

The National Institute of Standards and Technology (NIST)/Communications Technology Laboratory (CTL) enables science and industry by providing essential measurement methods, instrumentation, and standards to support all phases of communications technology development. In order to pursue these activities, the RF Technology Division requires repair and calibration of a OML, Inc Model V05VNA2-T/R-A Frequency Extension Module.

Objective(s):

Repair malfunctioning instrument.

General Requirements:

The instrument below requires repair and calibration. Specific issue to be repaired is a failure traced to mixer diodes. The diodes show resistor characteristic instead of the classical diode characteristic when tested with diode curve tracer. Repair requires replacing the non-functional mixer to original factory condition with a new mixer, preliminary test, environmental screening, burn-in and final test to manufacturer’s warranty-compatible specifications.

Special Requirements:

N/A

Tasks:

Task Number

Description

1 Repair Instrument (Frequency Extension Module, Model V05VNA2, Ser. 100302-1)

Requirement 1-1 Replace Mixer

Requirement 1-2 Preliminary Test

Requirement 1-3 Environmental Screening

Requirement 1-4 Burn-In

Requirement 1-5 Final Test

Place of Performance:

Vendor’s Facility

Delivery Date:

14 days After Release of Order (ARO)

Government-Furnished Property, Material, Equipment, or Information:

(GFP, GFM, GFE, or GFI)

Security:

(1) NIST is a restricted campus. An identification badge is required for access into buildings and must be presented to the armed Security Police when entering the campus.

(2) Regular Business Hours: Regular business hours are Monday through Friday, 8:00 am to 5:00 pm Local Time.

(3) Identification Badges: Contractor employees shall comply with NIST identification and access requirements. Each Contractor employee shall wear a visible identification badge provided by the NIST Security Office.

(4) Vehicle Registration: All Contractor employees must register their vehicles with the NIST Security Office to gain access to the campus. A valid driver’s license, Government-furnished civilian ID, proof of insurance and current registration must be presented to the NIST Security Office, at which time a NIST vehicle pass will be issued. The pass shall be displayed on the vehicle in accordance with NIST Security Office instructions.

Travel:

Special Material Requirements:

Other Unique Requirements: