SOW.docx

DOCX document 92 KB Posted

Attached to
Fabrication of custom Brackets and Beams for wave mitigation.
Solicitation number
1305M225Q0183
Issued by

About this file

This is a Statement of Work (SOW) for the fabrication of custom support components for a NOAA National Water Level Observation Network (NWLON) tide gauge installation in Cape Vincent, NY. The project requires fabricating two (2) stainless steel support beams and four (4) mounting brackets, each beam weighing approximately 400 pounds, constructed from 316 Stainless Steel according to specific engineering drawings.

The solicitation is a small business set-aside with a 90-day performance period from award, requiring vendors to fabricate the components and ship them to NOAA's Center for Operational Oceanographic Products and Services at 672 Independence Way, Chesapeake, VA 23320. Vendors must provide all labor and materials, allow for government inspection during fabrication at no additional cost, and keep the beam and bracket parts separate despite the drawing showing them attached. The government point of contact is Tyran Claypool, and contractors must be registered in the System for Award Management (SAM) to be eligible for award.

View the file

Other files

File Type Posted
FAQ.docx DOCX document
FAQ.docx DOCX document
52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services DEV FEB 2025.pdf PDF
Support Beams and Brackets drawings.pdf PDF
OFFEROR INSTRUCTIONS.docx DOCX document
1305M225Q0183.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

UNITED STATES DEPARTMENT OF COMMERCE

National Oceanic and Atmospheric Administration NATIONAL OCEAN SERVICE Center for Operational Oceanographic Products and Services Field Operations Division, Atlantic Operations Branch 672 Independence Way Chesapeake, VA 23320

Statement of Work Support Beam and Brackets for Cape Vincent, NY

FABRICATION SERVICES

Project Information

The National Oceanic and Atmospheric Administration’s (NOAA) Center for Operational Oceanographic Products and services (CO-OPS) needs to have two beams and 4 brackets fabricated from 316 Stainless Steel material for one of their National Water Level Observation Network (NWLON) Tide Gauges. Refer to the engineering drawings titled ‘Support Beams and brackets’ for all details. Vendor shall provide all the labor and materials for the fabricaiton of parts as described in the drawings.

Approximate weight of each beam is 400 pounds. Quote shall include shipping the 2 beams and 4 brackets to 672 Independence Way, Chesapeake VA 23320. Vendor shall allow for an inspection during the fabrication process at no additional cost to the government.

Specific Sheet notes:

· Sheet NO. G-02, Page 3/6

· Drawing depicts brackets attached to beam but this will be welded together in the field. Vendor to keep parts separate.

· Sheet NO. S-01, Page 4/6

· Vendor to make two of the ‘Supporting Beam’

· Sheet NO. S-02, Page 5/6

· Vendor to fabricate 2 right brackets and 2 left brackets for a total of 4 brackets.

Period of Performance:

Beams and Brackets shall be shipped to NOAA no later than 90 days after award.

GOVERNMENT POINT OF CONTACT, (IPP POC & Technical POC):

Tyran Claypool – tyran.claypool@noaa.gov

Figure 1: ISO View image3.png image1.jpeg image2.png

File details come from the government source that posted it. Updated .